Post-refresh activities in BI after R/3 is restored or refreshed

Dear Experts
From what i could recall, post-refresh of R/3 system requires certain steps to be done on the basis / Netweaver layer of BI before the system can be normalised.
I recall that there is a RFC (sm59) user whose password I need to know in order to carry out the BDLS?
Please advise what activities are needed after a R/3 system connected to BI is refreshed or restored with backup.
Is there a guide for this?
Would greatly appreciate your advice.
Best regards
Pascal

Hi,
Check following
Delta Loads:
1. Whenever a refresh happens from the production, the delta pointers are disturbed.
2. You need to re initialize the delta pointer for the DS you mentioned.
3. If it is for the testing purpose of the Delta functionality, you may intialize the delta pointer 1st and then ask for postings of data in the ECC side.
4. Once the postings are done, you would see data in Delta Queue in RSA7 in source system.
5. Now run the Delta InfoPackage so as to fetch this data from the Delta Q of SS to the BW system.
Full Loads
1. If you are expecting a full load (Historical data), you need to first fill the Setup tables (in Background only) in the SS.
2. Once the Setup table fill job is completed in SS, you may execute a Full InfoPackage in order to get this full load.
thanks

Similar Messages

How can we automate the Post system refresh activities

All,
Just want to know if there is a way to automate most of the post system refresh activities that were done by Basis.
Please note that i am talking about Post System refresh activities.
Appreciate your responses.
Thanks,
Giri

It all depends on what you would like to do: you keep the same SID or is it a rename?
- you could plan 1 jobs on production after event 'Zafterrefresh" with following steps:
that runs a BDLS
that does a cleanup of the spools
cleanup application logs
Trigger the event after the refresh and that starts.
Depending on your system you can run multiple jobs in //
some actions will have to be done manually:
user import
TMS config
etc

Post installation activities

Hi all,
What are the post installation activities after installation of Solution manger like activating sdcc,sdccn,EWA Etc.
please give me the solution.
vinnu.

Hi,
First Setup Landscape SMSY.
https://websmp108.sap-ag.de/~sapidb/011000358700004860052004E.sim
https://websmp108.sap-ag.de/~sapidb/011000358700000894082006E.sim
https://websmp108.sap-ag.de/~sapidb/011000358700002912202006E.sim
https://websmp108.sap-ag.de/~sapidb/011000358700004860082004E.sim
https://websmp108.sap-ag.de/~sapidb/011000358700002912242006E.sim
https://websmp108.sap-ag.de/~sapidb/011000358700004860532004E.sim
Once you setup System landscape, Setup SDCCN and Activate EWA.
https://websmp108.sap-ag.de/~sapidb/011000358700005011442004E
https://websmp108.sap-ag.de/~sapidb/011000358700004425722004E.sim
https://websmp108.sap-ag.de/~sapidb/011000358700008968942004E.sim
https://websmp108.sap-ag.de/~sapidb/011000358700001581382005E.sim
https://websmp108.sap-ag.de/~sapidb/011000358700008968952004E.sim
https://websmp108.sap-ag.de/~sapidb/011000358700001581372005E.sim
This will solve your problem, feel free to revert back.
--Ragu

Ides installation error during "perform post-load activities" ORA-00942:

Dear Guru's
I am having problem in ides ERP 2005 SR1 installation .with oracle 10g on windows 2003.
Currently i am facing problem at "perform post-load activities"
Below is the logs from sapinst_dev.log:-
TRACE [iaxohsqlx.hpp:1043]
 COraSQLScriptExec<LoggingStrategy>::executeScript()
COraSQLScriptExec<LoggingStrategy>::executeScript: Script executed with error message.
TRACE [iaxxejsexp.cpp:188]
 EJS_Installer::writeTraceToLogBook()
OraSqlScript3.execute: Result of SQL:
ERROR 2011-02-14 10:50:28 [iaxxinscbk.cpp:271]
 abortInstallation
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'APPL1'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'APPL2'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'CLUST'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'DDIM'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3FACT' WHERE TABART = 'DFACT'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3ODS' WHERE TABART = 'DODS'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'POOL'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SDIC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SDOCU'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3700' WHERE TABART = 'SLDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3700' WHERE TABART = 'SLEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SLOAD'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SPROT'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3700' WHERE TABART = 'SSDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3700' WHERE TABART = 'SSEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SSRC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'TEMP'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3USR' WHERE TABART = 'USER'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3USR' WHERE TABART = 'USER1'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'APPL0'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'APPL1'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'APPL2'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'CLUST'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'DDIM'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3FACT' WHERE TABART = 'DFACT'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3ODS' WHERE TABART = 'DODS'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'POOL'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SDIC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSP. SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
TRACE [iaxxejsbas.hpp:388]
 handleException<ESAPinstException>()
Converting exception into JS Exception Exception.
ERROR 2011-02-14 10:50:28
 CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-02-14 10:50:28 [iaxxgenimp.cpp:736]
 showDialog()
FCO-00011 The step runDdicoraSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0|runDdicoraSql was executed with status ERROR .
TRACE [iaxxgenimp.cpp:657]
 showDialog()
<html><head></head><body>An error occurred while processing service SAP ERP 2005 Support Release 1 > SAP Systems > Oracle > Central System > Central System Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS
TRACE [iaxxgenimp.cpp:1093]
 showDialog()
waiting for an answer from gui
PLEASE HELP.
Regards
AKif

Below is the ora_sql_results.log
==============================================================
2011-02-14, 12:23:39 SAPINST ORACLE start logging for
@@ddicora.sql
exit;
Output of SQL executing program:
SQL*Plus: Release 10.2.0.4.0 - Production on Mon Feb 14 12:23:39 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Connected.
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'APPL0'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'APPL1'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'APPL2'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'CLUST'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'DDIM'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3FACT' WHERE TABART = 'DFACT'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3ODS' WHERE TABART = 'DODS'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'POOL'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SDIC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SDOCU'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3700' WHERE TABART = 'SLDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3700' WHERE TABART = 'SLEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SLOAD'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SPROT'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3700' WHERE TABART = 'SSDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3700' WHERE TABART = 'SSEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SSRC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'TEMP'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3USR' WHERE TABART = 'USER'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.taora SET TABSPACE = 'PSAPSR3USR' WHERE TABART = 'USER1'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'APPL0'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'APPL1'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'APPL2'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'CLUST'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'DDIM'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3FACT' WHERE TABART = 'DFACT'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3ODS' WHERE TABART = 'DODS'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'POOL'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SDIC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SDOCU'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3700' WHERE TABART = 'SLDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3700' WHERE TABART = 'SLEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SLOAD'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SPROT'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3700' WHERE TABART = 'SSDEF'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3700' WHERE TABART = 'SSEXC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'SSRC'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3' WHERE TABART = 'TEMP'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3USR' WHERE TABART = 'USER'
ERROR at line 1:
ORA-00942: table or view does not exist
UPDATE SAPSR3.iaora SET TABSPACE = 'PSAPSR3USR' WHERE TABART = 'USER1'
ERROR at line 1:
ORA-00942: table or view does not exist
DELETE FROM SAPSR3.tsora
ERROR at line 1:
ORA-00942: table or view does not exist
INSERT INTO SAPSR3.tsora (TABSPACE, INDSPACE) VALUES ('PSAPSR3', 'PSAPSR3')
ERROR at line 1:
ORA-00942: table or view does not exist
INSERT INTO SAPSR3.tsora (TABSPACE, INDSPACE) VALUES ('PSAPSR3FACT', 'PSAPSR3FACT')
ERROR at line 1:
ORA-00942: table or view does not exist
INSERT INTO SAPSR3.tsora (TABSPACE, INDSPACE) VALUES ('PSAPSR3ODS', 'PSAPSR3ODS')
ERROR at line 1:
ORA-00942: table or view does not exist
INSERT INTO SAPSR3.tsora (TABSPACE, INDSPACE) VALUES ('PSAPSR3700', 'PSAPSR3700')
ERROR at line 1:
ORA-00942: table or view does not exist
INSERT INTO SAPSR3.tsora (TABSPACE, INDSPACE) VALUES ('PSAPSR3USR', 'PSAPSR3USR')
ERROR at line 1:
ORA-00942: table or view does not exist
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SAPINST: End of output of SQL executing program F:\oracle\IIT\102/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-02-14, 12:23:42 SAPINST ORACLE stop logging

The Finder is not refreshing the icon thumbnail after copying

The Finder is not refreshing the icon thumbnail after copying.
I tried copying a couple of foders from the internal HD to a USB drive and the resulting icons kept an empty progress...
WHY????

Hello,
It looks like possibly a Permissions problem... the X above the folder.
In Finder do a Get Info on that drive, or the folders on that drive that you're trying to copy to.
Úgy néz ki, mint esetleg egy Engedélyek probléma ... X felett a mappát.
A kereső nem egy Get Info a meghajtón, vagy a mappákat a meghajtón, hogy akarsz másolni.

'You can post in new year only after closing the previous year

Hello Experts,
I am also getting same error while executing depreciation run AFAB ''You can post in new year only after closing the previous year''.
I found one OSS Note 18800 and it is saying solution as below ...
At the first depreciation posting in the new fiscal year after a shortened fiscal year, the fiscal year variants must, in all cases, still be entered in asset customizing and in FI customizing for the affected company code. If necessary, all periods for the following fiscal year must be maintained with the variant of the shortened fiscal year.
Up to 2.2D the following correction must also be installed:
Please carry out the syntax check only in main program SAPLAFAR.
But in my case there is no shortended fiscal year.
Can I apply this OSS note correction instructions ?
Please suggest me.

Hi
I don't think so. Moreover that is applicable till 2.2D.
Moreover depreciation is to be run for all periods you have not run earlier. Please check upto which period dep run has happened. Thereafter close the fiscal years in order thro AJAB.
S Jayaram

How do I re-install Photoshop CS6 after doing a Windows 8.1 REFRESH? Lightroom and Topaz installed great but not Photoshop

I have my Photoshop CS6 Serial number and thought it would be easy to re-install software. Message says my serial number is VALID but not for this version of software.
Any help with re-installing Adobe Photoshop CS6 on same computer after doing a Windows 8.1 REFRESH would be appreciated!
Phillip Wattles - Bedford, TX

The best for this would be Contact Customer Care Chat or phone.
While we as volunteers handle technical questions, we can't make a serial number work.
I hope you have registered your software with Adobe, it should make this easier.
Gene

I tried to update my sons iPad and now it won't turn on or off just a picture of a cable and I tunes symbol. Can it be fixed or is it broken I've seen posts saying their iPads died after doing updates.

I tried to update my sons iPad now it won't turn on or off it shows a cable and iTunes symbol tried holding down sleep button & screen button but no luck does this mean it's Broken I've seen posts saying their iPad died after doing updates.

It's not broken, it just means that the iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
You will need to connect the iPad, via its cable, to a computer's iTunes (you will need an up-to-date version of iTunes installed on the computer), and you should then be able to reset the iPad and restore/resync the content to it.

Refresh activities listed in workspace inbox automatically

Hi, I have a split-n implemented inside a process. The activity is asigned to a group of persons with a specific role. The first person who executes the activity completes the activity and the process continues, but this activity is still shown in other persons whom the activity was assigned previously.
I want to reload other users' inbox so they can't see this activity anymore.
I found this code inside workspace.properties, which is located in OraBPMStudioHome\webapps\workspace\WEB-INF.
# Not used in this version.
fuego.workspace.refreshTimeMin=1
I've also found this code for FuegoBPM System Administrator 5
fuego.portal.autoRefreshMenuOptions=true
fuego.portal.refreshTimeMin=0.1
I've tried coping this code inside in workspace.properties but it didn't work.
Does anybody know the equivalent to refresh activities listed in workspace inbox automatically code used in Oracle BPM Studio 10.3.1.0?

Hi Joe,
normally the inbox is refreshed automatically when you enter.
We found the program that is called when you enter the inbox.
Here you can add additional code.
Function module: SINWP
subroutine: append_folrg_to_tree
Best regards,
Werner.

HT4550 My safari is permanently on safe mode even after turning it of the pages refresh it goes back into safe mode how do i remove it

My safari is permanently on safe mode even after turning it of the pages refresh it goes back into safe mode how do I remove it.

Hold the shift key down and launch Safari.
If not, try suggestions made in this article.
http://reviews.cnet.com/8301-13727_7-57393558-263/tackling-macs-that-always-boot -to-safe-mode/
Best.

Refreshing ADF Query Component after changing some property of a criteria

Hi All
Use Case : Refreshing ADF Query Component after changing some property of a criteria attribute.
I have a query panel with 2 query criteria i.e. FirstName and DepartmentId where in DepartmentId is a drop down. The scenario is like when change the value of DepartmentId to 'Finance' with code value of '100' then my criteria attribute 'Firstaname' should be invisibe(queriable=false).
Approach: Have overriden the queryOperationListener of adfquery as " queryOperationListener ="#{backingBeanScope.backing_queryLstener.processQueryOperation}" "
My backing bean method goes as below :
public void processQueryOperation(QueryOperationEvent queryOperationEvent) {
// Add event code here...
if( queryOperationEvent.getOperation().equals(queryOperationEvent.getOperation().CRITERION_UPDATE) ){
DCBindingContainer bindings = (DCBindingContainer)this.getBindings();
DCIteratorBinding iter =bindings.findIteratorBinding("EmployeeView1Iterator");
ViewObjectImpl voimpl = (ViewObjectImpl)iter.getViewObject();
ViewCriteria vc = voimpl.getViewCriteriaManager().getViewCriteria("EmployeeViewCriteriaDemo");
Row currRow = vc.first();
System.out.println("Department :"+currRow.getAttribute("DepartmentId"));
if( (Integer)currRow.getAttribute("DepartmentId") ==100 ){
AttributeDef[] attrs = voimpl.getAttributeDefs();
int attrIndex = voimpl.getAttributeIndexOf("FirstName");
ViewAttributeDefImpl attrDef = (ViewAttributeDefImpl) attrs[attrIndex];
attrDef.setQueriable(false);
// AdfFacesContext.getCurrentInstance().addPartialTarget(getQryId1()); //here i need to refresh the query component which is not happening
// refreshQueryComponent(getQryId1());
Everything is happening as expected but the query panel s not get refreshed.When i refresh the whole link/page then i can see the change.
Please suggest.
Thanks in adv.
-Sanjeeb

Hi,
can's say anything about the first part of the question as more insight to the implementation would be required. However, have a look at http://www.oracle.com/technetwork/developer-tools/adf/learnmore/83-bidi-synchronization-tree-form-401841.pdf, which may be what you are looking for
To the second part: You can programmaticallly refresh the tree component from a managed bean. So instead of using the declarative PPR option (or ChangeEventPolicy set to PPR on the iterator binding) you can wire the submit button to the managed bean, perform your validation and if it fails don't refresh teh tree
The call is
AdfFacesContext.getCurrentInstance().addPartialTarget(the_tree_instance)
Frank

Step by Step Post Installation activities

Dear Gurus,
We have EP 6 on Windows and SQL Server. I have installed the dev system. Can anyone kindly advice me in steps by steps, the post installation activities? We are planning to have ESS / MSS on EP. Initially I have been asked to connect this EP DEV Server to the ECC DEV Server.
Can anyone help me on this? How / where do I start with this configurations?
Best Regards,

Sujeet,
Post Installation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/09cb9ffb-0701-0010-4183-c2e8f405bf9a
Also, if you are planning on having ESS and MSS configured.
You will have to download the business packages from
https://www.sdn.sap.com/irj/sdn/contentportfolio
Once you are done with downloading the BP's, visit this weblog and you can configure ESS BP on your system.
Configuring The Business Package For Employee Self Service (ESS)-mySAP ERP 2004
Consider rewarding points if handy!
Cheers,
Sandeep Tudumu

My Keyboard and touch-pad will work during post, but will not work after the os loads?

I have a G60 and My Keyboard and touch-pad will work during post, but will not work after the os loads? Im running Windows 7, Anyone have any Ideas? I have already tried a hard reset, and safe mode???

Try pressing the fn key and f2 to reach bios
or
try a usb mouse from your desktop
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Post clone activities

Hi Experts,
Can any one tell me which are the post clone steps in details in R12.
Thanks,
Abdul

I want to know apps post clone activities like
workflow configuration,
Printer configuration,
Profile setting and other activities.
If their any database side activities also send me It is all in the documentation -- Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
Please also see these docs.
How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]
Concurrent Processing - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables [ID 134007.1]
Thanks,
Hussein

Faulty Windows after 'successful' System Image restore to new hard drive.

This question posted as ' Cut down Win 7 after System Image restore to new HDD' in the community but no satisfactory answer. Please may I ask here.
Win reported a successful System Image creation of C: on my E: drive. C was replaced with a new 2TB drive (previously 1.5Tb) and the image restored. Win reported 'successful' restoration of C: immediately followed by the common 'You must restart
your computer to apply these changes...' which I assumed was just Win taking note of the new drive.
On running, everything seems fine at first but you start to notice faults. Most importantly Win doesn't seem to recognise itself. If you start some of the functions in control panel (eg System Manager) you get a message from User Account
Control 'Do you want to allow the following program from an unknown publisher to make changes to this computer?'.
Windows Live Mail won't work. You get a message 'Windows Live Mail could not be started. Closing Windows Live Mail. Your calendar contains corrupt data that is forcing Windows Live Mail to close (0x8E5E0247).' I have never used the
calendar function so there shouldn't be any data there.
Browsing history in IE is there on very first opening but is immediately lost and never recovered. Favourites are intact but all login details are lost. All your internet feeds are lost. Message 'The feed download was interrupted.....'
Trying to create new feeds is unsuccessful.    When you try and download something the usual IE message 'Do you want to run or save ... ' comes up at the bottom of the screen but the buttons do not work so you cannot get any downloads.
Installed non-Windows applications do seem to run OK though I usually switch back to the original drive pretty quick.
2 x Dell Precision T5500 desktops, both reasonably high spec and more or less identical though one is nearly 3 years old and the other approaching 4. Both Win7 x64. The fault identical on both machines. I have had these drives in and out
so many times trying to solve this there is a real risk of damaging the disk or lead. Can anyone suggest what might be wrong or how Win could be fixed?? I assume 2Tb is ok. Is it normal to get a restart message after a 'Successful' image
restore message. I've tried cloning the drive as well but got exactly the same messages and faults. Next I was going to try creating the image after running something like EndItAll and then seeing if the image would restore more successfully
to a different 1.5Tb drive though I don't see this should make any difference. 'Clutching at straws' comes to mind.
Thanks.

Hello, thanks for your interest.
Yes, principally it's the Windows features which are faulty. It's not that they don't work at all (except for win live mail which gives that message about being forced to shutdown), rather that there are faulty features.
All of the functions in control panel, for example, work OK. But when you select them there is this message from user account control ' Do you want to allow the following program from an unknown publisher to make changes to this computer'.   It
then goes on to give details the oddity being that the publisher is listed as 'Unknown'. This is the standard User Account Control dialogue but the strange thing is that it is not recognising the functions coming with windows.    If you
click yes it goes on to open device manager or whichever one it was that you wanted and the function works quite normally.
Non windows applications (including Microsoft Office) run normally without the user account control dialogue. The only oddity I noticed today was that one program seemed to have lost it's licencing information and gave a message that the
month trial period was up with an invitation to licence.
Today I tried to restore an image to a replacement 1.5TB disc. (i.e. the same size as the image was made from). The whole process went quite smoothly and Windows seemed to be working without the faults on the replacement drive.     So
having shown that the image must be OK I tried swapping the 1.5 drive for the 2Tb drive and repeating the restore from the same image.   Immediately on running, Windows gave me the message 'You must restart the computer to apply these changes....
(which it had not done for the 1.5Tb restoration) and all the old faults were back.   The message might be quite innocent and simply indicate that Windows is taking note or the different size drive but it seems to be associated with the arrival of
the faults. (The new drive is formatted as for the 1.5Tb with C: and Recovery partitions and the extra space left unallocated).
No, I have not tried Reinstalling Windows Live Mail yet. Today I was working on the newer machine and my mail is on the older one. It is odd that both machines show exactly the same problem. It must be something to do with the move to a different size disk.   I
guess I would have to reinstall IE as well as that was the other application that was really faulty.
Yes, that is the thread I tried in the community but I didn't get any solution.

Post-refresh activities in BI after R/3 is restored or refreshed

Similar Messages

Maybe you are looking for