Post SCCM Installation Issues

After installing SCCM 2012 in our lab, I am finding four critical errors in the Monitoring | System Status | Component Status
1. SMS_MP_CONTROL_MANAGER - Availability is unknown and is marked red
2. SMS_DISTRIBUTION_MANAGER - Availability is online but is marked red
3. SMS_SITE_COMPONENT_MANAGER - Component Not Installed by Site Component Manager - Availability is online but marked red
4. SMS_NOTIFICATION_SERVER - Availability is unknown and is marked red.
Anyone can offer how to resolve the critical issues ??? Many thanks in advance.

Check here for server prerequisites
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SiteSystemRolePrereqs
or here for Server 2012 prereqs
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_Win2k12SiteSystemPrereqs
Moo.

Similar Messages

SCCM installation and post requirements

I have searched several threads regarding the permission prerequisites for SCCM installation but have not found one that cleary addresses my question.
I have setup the appropriate permissions with the SCCM computer accounts and site installation service account added
to the local administrators group on the SQL server. Is this access still needed for post SCCM installation or can it be reduces once installation is complete?
I would like to remove the SCCM computer accounts from the SQL local admin group post installation and reduce the SCCM service account from the sysadmin role on SQL.
What is the supported configuration post installation?

The official response is that we require admin rights to all site system computers, even after installation. There are ongoing tasks we perform after installation that will fail and generate errors/status messages if you were to remove it.
With that said, for SQL Server:
If the customer removes the local admininstrators group from the SQL sysadmin then we still work.
Hi Wally,
do you mean the SQL sysadmin right for SCCM installation service account is not required after the installation? is it officially supported by Microsoft?

WVC54GCA Installation issue

I have read a few posts re installation issues and 192.168.1.115 ip errors trying to get the camera to work. I dont find a resolution that helps me so thought I would post before I launch the camera with trash!
Im hooked up on a netgear WNR854T router on with gateway 192.168.11.1. When running setup the settings reproted back are;
Status:             Unconfigured
Camera Name: MyCamera
NW Config:       DHCP
IP:                   192.168.1.115
SN Mask          255.255.255.0
DF GW            0.0.0.0
I then proceed through set up, setting both DHCP and static on different attempts and manualy configuring wireless as it fails to find on search or after many refresh.
Encryption is - WPA-PSK [TKIP] + WPA2-PSK [AES]
I have tried many hard reboots all without success, receiving "Save configuration has failed!"
I am running W7 and camera does not appear in [Network] and so far has not apperead under [Attached Devices] on router.
HELP!!!!!!!!!!!!

WVC54GCA Camera works on the DHCP. If you hardwired the Camera to the Router, your router should automatically assign a IP to your Camera. To know the camera IP address you need to login to the camera setup page and under the DHCP Client table list you will find the Camera IP address. Using that IP address you can login to your camera and make the changes on it.
If its not listed under the DHCP Client table list, then you need to Press and Hold the reset button on your camera for 30sec.. Release the Reset button and then after 30sec plug the power to the Camera.... Now check if the Camera is listed under the DHCP Client table. If yes then you can use that IP address to login to the camera setup page and make the changes on your Camera.

Lightroom 4.2 Installation Issue

Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct. 4.2 install ran fine.
I've read through the posts in the Lightroom forum regarding LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
1) Downloaded the installation software twice.
2) Ran the setup program in admin user mode.
3) Ran the install in admin user mode.
4) Get the following error in a Windows Installer window:
The feature you are trying to use is on a network resource that is unavailable.
Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
Use source:
c:\Users\RMJF\AppData\Local\Temp\{...}
What I have found (after displaying hidden AppData folder):
The location where the .msi file resides is different from the one defaulting in the above window.
I select this alternate path, but still cannot complete the installation.
Furthermore, when I cancel the install, I get this error:
Adobe Photoshop Lightroom 4.2 64-bit Installer Info
Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
The installation source for this product is not available. Verify that the source exists and that you can access it.
All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
So, looking for suggestions.
Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
All quite frustrating. Hope you can get me to a speedy solution.
(System info: Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare! Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well. No other apps are running during the install.)
Message was edited by: marzo19

untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
even the microsoft fixid diden't help.
So also desperate.

[Solved] Black screen - Installation issues on Dell Inspiron 1720

Hi,
I'm new to Archlinux, and i want to post my experience/issues of my first installation:
I performance the core installation (base + devel packages and wireless tools as extra package)
relevant hardware/drivers used:
b44 for broadcom nic (wired)
iwl3945 for my wireless nic
intel g965 graphics card (intel GM965 express chipset - xf86-video-intel driver)
Installation went ok till i had to upgrade the system:
pacman -Suy (after package synchronization)
glibc: /usr/bin/tzselect exists in filesystem
glibc: /usr/sbin/zdump exists in filesystem
glibc: /usr/sbin/zic exists in filesystem
After some research on the wiki i found that i had to query the packages to know if those files are owned by a program or not (if no pakcage owns those i could remove them, but it was not the case)
pacman -Qo tzselect
pacman -Qo zdump
pacman -Qo zic
All were owned by the package tzdata:
so i reinstalled the package tzdata:
pacman -S tzdata
Has this to be filed as a bug or is this a stupid newbie error? (did the installation on a virtual machine, on a laptop (twice) and always got this error)
After that i was able to upgrade the system.
Following that i installed the video card drivers:
pacman -S xf86-video-intel and i rebooted the system.
After reboot i got the grub screen, booted the system and got a black screen (last thing i saw as something like loading udevevents..)
Googling again and looking the forums here, i read that i had to chroot my environment and update the system again (pacman -Suy -> which did not help).
Soo after some more searching i found 2 things:
- https://wiki.archlinux.org/index.php/KM … odesetting : i added this in menu.lst: nomodeset
- i blacklisted the intel driver
Rebooted and i my graphics were working again.
So later on i'll test if the parameter solved my problem, or blacklisting the driver.
- i'll unblacklist the driver and reboot -> if it works then i know it's that parameter
- if not ok, i'll blacklist the driver and remove the parameter from the menu.lst
I hope to find what's causing the issue.
Anyone having issues with the intel driver?
Thanks for sharing your experience/info.
Last edited by Manuuz (2012-05-12 13:12:54)

Getting a little bit further, it requires a lot of configuration to get what you want..
- I just installed fluxbox
- added my user to the sudo group (allowing to reboot)
- installed Slim
What's i've noticed also is that when you select an interface in etc/rc.conf, for example, eth0, and it's not connected at bootup, you lose like 10 seconds before the boot process proceeds.
If you out-comment that line, you get a red line (error) saying that no interface is definded.
I guess i'll just have to disable the network daemon at startup and install some kind of network connection manager for my wireless at logon.

HP Laserjet Pro 100 Color MFP M175nw installation issue

Hello,
I have a problem installing my HP Laserjet Pro 100 Color MFP M175nw wirelessly. Back in time when I first installed it, it took me a few installations, but suddenly it was installed. Now after a lot of tries, I still get stuck at the part where the USB cable have to be used to pass the network details to the printer. It get stuck at 15% and after a while it gives the error that I have to connect my printer, although it is plugged and the installation initially continued.
When I put my cable, Win7 is also itself installing the printer, can that be the issue?
Thanks in advance for your help!
Ewout

Hello Ewout,
I would suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
An HP representative has greater resources and will be able to look to see if the system has any hardware issues.
Thanks again for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Installation issue on opensuse 11

Hey All, Im a Windows guy still struggling with Linux set-upsso take it easy on me! :) and Im having a hard time getting blaze installed and running. This is what Ive done so far. I've successfully set-up the latest copy of openSuse11 64 bit version with: Tomcat 6.0.16 (Tested and running) ANT 1.7 JAVA SDK & JDK 6 Junit (ant-junit, junit, junit-javadoc, junit-manual, libcppunit-1_12-0) Downloaded both blazeds.war and blazeds_src_3-0-0-544.zip From Tomcat Manager I uploaded the blazeds.war file successfully. I unzipped the zip file into root/blazeds and from a command prompt ran ant. These are the errors Im getting: * [taskdef] Could no load definitions from resource net/sf/antcontrib/antcontrib.properties. It could not be found. (Repeats about a dozen times) * BUILD FAILED * /root/blazeds/build.xml:445: The following error occurred while executing this line: * /root/blazeds/resources/fds-ajax-bridge/build.xml:52 Problem: failed to create task or type if Cause: The name is undefined. * Action: Check the spelling * Action: Check that any custom tasks/types have been declared * Action: Check that any <presetdef>/<mac rodef> declarations have taken place. Variables: env | grep _HOME ANT_HOME = /usr/share/ant JRE_HOME =/usr/lib64/jvm/java/jre JAVA_HOME =/usr/lib64/jvm/java/jre SDK_HOME =/usr/lib64/jvm/java/jre JDK_HOME =/usr/lib64/jvm/java/jre Any ideas? Brad

Hi Alex,
Sorry I've been away and just got back. Presently I'm working from jrun4 and would like to use blazeds instead. Once my projects get going I would need the ability to use my customers already made linux/tomcat boxes and just plug in blaze.
I look forward to your answer.
Brad
On Fri, Aug 1, 2008 at 12:57 PM, Alex Glosband
<
[email protected]> wrote:
A new message was posted by Alex Glosband in
Configuration and Getting Started Discussion --
Installation issue on opensuse 11
Are you just trying to install and run BlazeDS? Why do you need to build from source?
-Alex
View/reply at
Installation issue on opensuse 11
Replies by email are OK.
Use the
unsubscribe form to cancel your email subscription.

HP Photosmart D7360 -- Driver/Installation issue

For some reason my HP Pavillion Laptop no longer recognizes my HP Photosmart printer. I have downloaded the drivers, I have the disk and no matter what I do, I can't get the printer driver to install.
It tells me that it can load verythign BUT the driver. Any ideas?
Thanks
jstjohn

Welcome to the forums @Pierre-Louis ,
I read about the installation issue you're having with your Photosmart C4280 on Windows 8. I have a guide that I have heard successful results from and I hope they work for your scenario as well!
Click this link to get started: A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet 7310 Installation Issue(s) with Windows 7 Pro 64 Bit OS

Recently purchased Windows 7 Pro 64 bit OS platform laptop. Downloaded latest driver for All-In-One and executed. Followed USB connection directions, Windows Driver installation indicated all drivers installed completely, but the last step (configuration) failed (after running about five minutes).
Device Manager indicates "Officejet 7300 (DOT4PRINT)" under "IEEE 128.4 compatible printer" normal; also indicates "Officejet 7300 series (DOT4USB)" under "USB controllers" normal... One can print without any problem.... Other than the failure message at the end of the installation, the "HP Solution Center" won't launch....error message includes: "HP Solution Center cannot run because your device installation is not complete."
I have completely uninstalled and reinstalled to no avail.... I would appreciate some help. thanks.... Jim

Hi JRParker,
This document on A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows will assist in narrowing the cause of the installation interruption.
I will need to know if you see a four-digit error code, or if the message contains a ".msi" or ".dll"
file association.
Please take a screenshot of this error message by:
1.) Clicking on the Print Scrn
2.) Open Microsoft Paint
3.) Click on File, then Paste. The screenshot should appear on the canvas.
4.) Click File, then Save as. You will have an opportunity to save the document to the desktop with a unique name.
5.) Click Save.
I am looking forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Acrobat Installation Issues due to Computer Switch

My surface bit the dust last week and I had to replace it. Downloaded acrobat successfully tot eh surface but then that apparently cut off access to the adobe pro on my home computer.
How do I get acrobat re-installed without the "you don't have a license" error message.
I am on a subscription plan
P

licensing issue-the system does not recognize that I have a license so I would love to eb able to speak with a real person so they coudl go and look at my purchase and fix the problem.
I'll be calling on Monday- right now I am using a trial version again but need to fix before the 39 days are up Peter Collopy, CSP, CIH, CHP
Damariscotta, ME518.859.1944 (cell)
From: RahulTyagi4you <[email protected]>
To: Peter Collopy <[email protected]>
Sent: Sunday, March 1, 2015 5:30 AM
Subject: Acrobat Installation Issues due to Computer Switch
Acrobat Installation Issues due to Computer Switch
created by RahulTyagi4you in Acrobat Installation & Update Issues - View the full discussionHi Peter Collopy, Is Acrobat properly installed on your system?Please confirm if you facing installation issues or licensing issues? Regards,Rahul Tyagi If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240431#7240431 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240431#7240431 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Adobe AIR Installation Issue

Hi,
I am facing an installation issue with AIR file on multiple machines.Though I am able to install it on some machiens.Below is the log for same.
[2011-08-05:11:56:02] Application Installer begin with version 2.7.0.19530 on Windows XP x86
[2011-08-05:11:56:02] Commandline is: E:\ASMTv3India\ASMT2011_Beta-4Aug2011\ASMT2011_Beta.air
[2011-08-05:11:56:02] Installed runtime (2.7.0.19530) located at c:\Program Files\Common Files\Adobe AIR
[2011-08-05:11:56:02] Unpackaging file:///E:/v3India/App_Beta.air to C:\Documents and Settings\Media\Local Settings\Temp\fla2D.tmp
[2011-08-05:11:56:03] Application signature verified
[2011-08-05:11:56:03] Unpackaging/validation complete
[2011-08-05:11:56:03] No app located for appID 'App2011-Beta' and pubID ''
[2011-08-05:11:56:12] Converting unpackaged application to a native installation package in C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp
[2011-08-05:11:56:18] Native installation package creation succeeded
[2011-08-05:11:56:18] Starting app installation to C:\Program Files. Installing app ASMT2011-Beta version v3.010 using the source file at file:///E:/v3India/App_Beta.air
[2011-08-05:11:56:18] Installing msi at C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp\setup.msi with guid {EBF346A2-FD8C-08C2-07E8-AA91ABD1CAE6}
[2011-08-05:11:56:21] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-08-05:11:56:21] Rolling back install of C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp\setup.msi
[2011-08-05:11:56:21] Rollback complete
[2011-08-05:11:56:21] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-08-05:11:56:28] Application Installer end with exit code 7
Please do the needful.
Thanks & Regards
Vishal

Ok, I understand. So before we continue, we really need to figure out what the exact error is. Can you, on at least 2 systems, generate the MSI logs we'll need? Here's a document that explains how to enable logging and where to find the logs once they've been created:
How to enable Windows logging
Once you've enabled logging, try installing again. Grab the newly created msi logs and either post here or email me at [email protected] I'll examine the logs and see if we can find a common issue between the systems.
Thanks,
Chris

Another Adobe Air installation issue

I've tried removing the following directories and still get an error while installing.
C:\Program Files\Common Files\Adobe AIR
     C:\Users\Default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com
     C:\Users\phil\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com
     C:\Users\phil\AppData\Local\Adobe\AIR
     C:\Users\phil\AppData\Roaming\Adobe\AIR
     C:\ProgramData\Adobe\AIR
Yes, I ran it as administrator but not the default admin account. Phil's account has administrative privileges.
[2011-09-20:18:00:52] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:00:52] Commandline is: -x1 file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:00:52] Installed runtime (1.5.0.7220) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-20:18:00:52] Invoking Application Installer for combined install
[2011-09-20:18:00:52] Launching subprocess with commandline C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -withRuntime -url file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:00:52] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:00:52] Commandline is: -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -withRuntime -url file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:00:52] Installed runtime (1.5.0.7220) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-20:18:00:53] Unpackaging file:///C:/Users/phil/Downloads/LIFR-1.1.0.air to C:\Users\phil\AppData\Local\Temp\fla41C0.tmp
[2011-09-20:18:00:55] Application signature verified
[2011-09-20:18:00:55] Unpackaging/validation complete
[2011-09-20:18:00:55] No app located for appID 'com.amz.retirementplanner' and pubID ''
[2011-09-20:18:01:10] Converting unpackaged application to a native installation package in C:\Users\phil\AppData\Local\Temp\fla841F.tmp
[2011-09-20:18:01:11] Native installation package creation succeeded
[2011-09-20:18:01:11] Launching subprocess with commandline C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:01:11] Relaunching with elevation
[2011-09-20:18:01:14] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:01:14] Commandline is: -stdio \\.\pipe\AIR_3948_0 -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:01:14] Installed runtime (1.5.0.7220) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2011-09-20:18:01:15] Unpackaging file:///C:/Users/phil/Downloads/LIFR-1.1.0.air to C:\Users\phil\AppData\Local\Temp\fla98F4.tmp
[2011-09-20:18:01:17] Application signature verified
[2011-09-20:18:01:17] Unpackaging/validation complete
[2011-09-20:18:01:17] No app located for appID 'com.amz.retirementplanner' and pubID ''
[2011-09-20:18:01:17] Converting unpackaged application to a native installation package in C:\Users\phil\AppData\Local\Temp\flaA064.tmp
[2011-09-20:18:01:18] Native installation package creation succeeded
[2011-09-20:18:01:18] Starting silent combined runtime update and app install.
Updating runtime from version 1.5.0.7220 to version 2.7.1.19610.
Installing app com.amz.retirementplanner version 1.1.0 to C:\Program Files (x86) using the source file at file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
[2011-09-20:18:01:19] Installing msi at C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-20:18:01:24] Installing msi at C:\Users\phil\AppData\Local\Temp\flaA064.tmp\setup.msi with guid {05E8C32F-06A7-1EF5-81B0-485BEAFD69AB}
[2011-09-20:18:01:28] Application Installer end with exit code 0
[2011-09-20:18:01:28] Elevated install completed
[2011-09-20:18:01:28] Launching subprocess with commandline C:\Program Files (x86)\LIFR Retirement Planner 1.1\LIFR Retirement Planner 1.1.exe
[2011-09-20:18:01:29] Application Installer end with exit code 0
[2011-09-20:18:01:29] Subprocess app installer succeeded
[2011-09-20:18:01:29] Runtime Installer end with exit code 0
[2011-09-20:18:05:59] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:05:59] Commandline is:
[2011-09-20:18:05:59] No installed runtime detected
[2011-09-20:18:06:03] Relaunching with elevation
[2011-09-20:18:06:03] Launching subprocess with commandline c:\users\phil\appdata\local\temp\aire262.tmp\adobe air installer.exe -ei
[2011-09-20:18:06:07] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:06:07] Commandline is: -stdio \\.\pipe\AIR_3744_0 -ei
[2011-09-20:18:06:07] No installed runtime detected
[2011-09-20:18:06:07] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-20:18:06:07] Installing msi at c:\users\phil\appdata\local\temp\aire262.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-20:18:06:07] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:07] Rolling back install of c:\users\phil\appdata\local\temp\aire262.tmp\setup.msi
[2011-09-20:18:06:07] Rollback complete
[2011-09-20:18:06:07] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:07] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:07] Runtime Installer end with exit code 7
[2011-09-20:18:06:11] Runtime Installer end with exit code 7
[2011-09-20:18:06:30] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-20:18:06:30] Commandline is:
[2011-09-20:18:06:30] No installed runtime detected
[2011-09-20:18:06:34] Relaunching with elevation
[2011-09-20:18:06:34] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5b97.tmp\adobe air installer.exe -ei
[2011-09-20:18:06:37] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-20:18:06:37] Commandline is: -stdio \\.\pipe\AIR_1032_0 -ei
[2011-09-20:18:06:37] No installed runtime detected
[2011-09-20:18:06:37] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-20:18:06:37] Installing msi at c:\users\phil\appdata\local\temp\air5b97.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-20:18:06:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:37] Rolling back install of c:\users\phil\appdata\local\temp\air5b97.tmp\setup.msi
[2011-09-20:18:06:37] Rollback complete
[2011-09-20:18:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-20:18:06:37] Runtime Installer end with exit code 7
[2011-09-20:18:06:44] Runtime Installer end with exit code 7
[2011-09-21:06:20:28] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:20:28] Commandline is:
[2011-09-21:06:20:28] No installed runtime detected
[2011-09-21:06:20:32] Relaunching with elevation
[2011-09-21:06:20:32] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air4ee8.tmp\adobe air installer.exe -ei
[2011-09-21:06:20:36] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:20:36] Commandline is: -stdio \\.\pipe\AIR_5268_0 -ei
[2011-09-21:06:20:36] No installed runtime detected
[2011-09-21:06:20:36] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:20:36] Installing msi at c:\users\phil\appdata\local\temp\air4ee8.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:20:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:20:37] Rolling back install of c:\users\phil\appdata\local\temp\air4ee8.tmp\setup.msi
[2011-09-21:06:20:37] Rollback complete
[2011-09-21:06:20:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:20:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:20:37] Runtime Installer end with exit code 7
[2011-09-21:06:20:45] Runtime Installer end with exit code 7
[2011-09-21:06:39:03] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:39:03] Commandline is:
[2011-09-21:06:39:03] No installed runtime detected
[2011-09-21:06:39:23] Relaunching with elevation
[2011-09-21:06:39:23] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5445.tmp\adobe air installer.exe -ei
[2011-09-21:06:39:29] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:39:29] Commandline is: -stdio \\.\pipe\AIR_7016_0 -ei
[2011-09-21:06:39:29] No installed runtime detected
[2011-09-21:06:39:29] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:39:29] Installing msi at c:\users\phil\appdata\local\temp\air5445.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:39:30] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:39:30] Rolling back install of c:\users\phil\appdata\local\temp\air5445.tmp\setup.msi
[2011-09-21:06:39:30] Rollback complete
[2011-09-21:06:39:30] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:39:30] Runtime Installer end with exit code 7
[2011-09-21:06:39:40] Runtime Installer end with exit code 7
[2011-09-21:06:41:16] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:06:41:16] Commandline is:
[2011-09-21:06:41:16] No installed runtime detected
[2011-09-21:06:41:23] Relaunching with elevation
[2011-09-21:06:41:23] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5f4d.tmp\adobe air installer.exe -ei
[2011-09-21:06:41:32] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:41:32] Commandline is: -stdio \\.\pipe\AIR_5904_0 -ei
[2011-09-21:06:41:32] No installed runtime detected
[2011-09-21:06:41:32] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:41:32] Installing msi at c:\users\phil\appdata\local\temp\air5f4d.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:41:32] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:41:32] Rolling back install of c:\users\phil\appdata\local\temp\air5f4d.tmp\setup.msi
[2011-09-21:06:41:32] Rollback complete
[2011-09-21:06:41:32] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:41:32] Runtime Installer end with exit code 7
[2011-09-21:06:41:41] Runtime Installer end with exit code 7
[2011-09-21:06:46:44] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:06:46:44] Commandline is:
[2011-09-21:06:46:44] No installed runtime detected
[2011-09-21:06:46:52] Relaunching with elevation
[2011-09-21:06:46:52] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5aca.tmp\adobe air installer.exe -ei
[2011-09-21:06:46:56] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:46:56] Commandline is: -stdio \\.\pipe\AIR_6308_0 -ei
[2011-09-21:06:46:56] No installed runtime detected
[2011-09-21:06:46:56] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:46:56] Installing msi at c:\users\phil\appdata\local\temp\air5aca.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:46:56] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:46:56] Rolling back install of c:\users\phil\appdata\local\temp\air5aca.tmp\setup.msi
[2011-09-21:06:46:56] Rollback complete
[2011-09-21:06:46:56] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:46:56] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:46:58] Runtime Installer end with exit code 7
[2011-09-21:06:54:29] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:06:54:29] Commandline is:
[2011-09-21:06:54:29] No installed runtime detected
[2011-09-21:06:54:33] Relaunching with elevation
[2011-09-21:06:54:33] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air7942.tmp\adobe air installer.exe -ei
[2011-09-21:06:54:35] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:06:54:35] Commandline is: -stdio \\.\pipe\AIR_4300_0 -ei
[2011-09-21:06:54:35] No installed runtime detected
[2011-09-21:06:54:36] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:06:54:36] Installing msi at c:\users\phil\appdata\local\temp\air7942.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:06:54:36] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:54:36] Rolling back install of c:\users\phil\appdata\local\temp\air7942.tmp\setup.msi
[2011-09-21:06:54:36] Rollback complete
[2011-09-21:06:54:36] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:06:54:36] Runtime Installer end with exit code 7
[2011-09-21:06:54:38] Runtime Installer end with exit code 7
[2011-09-21:08:29:22] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:29:22] Commandline is:
[2011-09-21:08:29:22] No installed runtime detected
[2011-09-21:08:29:25] Relaunching with elevation
[2011-09-21:08:29:25] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air556f.tmp\adobe air installer.exe -ei
[2011-09-21:08:29:29] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:29:29] Commandline is: -stdio \\.\pipe\AIR_7108_0 -ei
[2011-09-21:08:29:29] No installed runtime detected
[2011-09-21:08:29:29] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:29:29] Installing msi at c:\users\phil\appdata\local\temp\air556f.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:29:29] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:29:29] Rolling back install of c:\users\phil\appdata\local\temp\air556f.tmp\setup.msi
[2011-09-21:08:29:29] Rollback complete
[2011-09-21:08:29:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:29:29] Runtime Installer end with exit code 7
[2011-09-21:08:34:00] Runtime Installer end with exit code 7
[2011-09-21:08:36:08] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:36:08] Commandline is:
[2011-09-21:08:36:08] No installed runtime detected
[2011-09-21:08:36:11] Relaunching with elevation
[2011-09-21:08:36:11] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air7bf3.tmp\adobe air installer.exe -ei
[2011-09-21:08:36:13] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:36:13] Commandline is: -stdio \\.\pipe\AIR_6760_0 -ei
[2011-09-21:08:36:13] No installed runtime detected
[2011-09-21:08:36:13] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:36:13] Installing msi at c:\users\phil\appdata\local\temp\air7bf3.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:36:13] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:13] Rolling back install of c:\users\phil\appdata\local\temp\air7bf3.tmp\setup.msi
[2011-09-21:08:36:13] Rollback complete
[2011-09-21:08:36:13] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:13] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:13] Runtime Installer end with exit code 7
[2011-09-21:08:36:15] Runtime Installer end with exit code 7
[2011-09-21:08:36:45] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:36:45] Commandline is:
[2011-09-21:08:36:45] No installed runtime detected
[2011-09-21:08:36:49] Relaunching with elevation
[2011-09-21:08:36:49] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air13de.tmp\adobe air installer.exe -ei
[2011-09-21:08:36:52] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:36:52] Commandline is: -stdio \\.\pipe\AIR_4472_0 -ei
[2011-09-21:08:36:52] No installed runtime detected
[2011-09-21:08:36:52] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:36:52] Installing msi at c:\users\phil\appdata\local\temp\air13de.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:36:52] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:52] Rolling back install of c:\users\phil\appdata\local\temp\air13de.tmp\setup.msi
[2011-09-21:08:36:52] Rollback complete
[2011-09-21:08:36:52] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:36:52] Runtime Installer end with exit code 7
[2011-09-21:08:36:52] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:37:03] Runtime Installer end with exit code 7
[2011-09-21:08:37:53] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:37:53] Commandline is:
[2011-09-21:08:37:53] No installed runtime detected
[2011-09-21:08:37:54] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:37:54] Commandline is:
[2011-09-21:08:37:54] No installed runtime detected
[2011-09-21:08:37:55] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:37:55] Commandline is:
[2011-09-21:08:37:55] No installed runtime detected
[2011-09-21:08:38:01] Relaunching with elevation
[2011-09-21:08:38:01] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air18cd.tmp\adobe air installer.exe -ei
[2011-09-21:08:38:11] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:38:11] Commandline is: -stdio \\.\pipe\AIR_3020_0 -ei
[2011-09-21:08:38:11] No installed runtime detected
[2011-09-21:08:38:11] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:38:11] Installing msi at c:\users\phil\appdata\local\temp\air18cd.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:38:11] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:11] Rolling back install of c:\users\phil\appdata\local\temp\air18cd.tmp\setup.msi
[2011-09-21:08:38:11] Rollback complete
[2011-09-21:08:38:11] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:11] Runtime Installer end with exit code 7
[2011-09-21:08:38:13] Runtime Installer end with exit code 7
[2011-09-21:08:38:20] Relaunching with elevation
[2011-09-21:08:38:20] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air2903.tmp\adobe air installer.exe -ei
[2011-09-21:08:38:22] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:38:22] Commandline is: -stdio \\.\pipe\AIR_6784_0 -ei
[2011-09-21:08:38:22] No installed runtime detected
[2011-09-21:08:38:22] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:38:22] Installing msi at c:\users\phil\appdata\local\temp\air2903.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:38:22] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:22] Rolling back install of c:\users\phil\appdata\local\temp\air2903.tmp\setup.msi
[2011-09-21:08:38:22] Rollback complete
[2011-09-21:08:38:22] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:22] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:22] Runtime Installer end with exit code 7
[2011-09-21:08:38:23] Runtime Installer end with exit code 7
[2011-09-21:08:38:25] Relaunching with elevation
[2011-09-21:08:38:25] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air1b7c.tmp\adobe air installer.exe -ei
[2011-09-21:08:38:27] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:38:27] Commandline is: -stdio \\.\pipe\AIR_4472_0 -ei
[2011-09-21:08:38:27] No installed runtime detected
[2011-09-21:08:38:27] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:38:27] Installing msi at c:\users\phil\appdata\local\temp\air1b7c.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:38:27] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:27] Rolling back install of c:\users\phil\appdata\local\temp\air1b7c.tmp\setup.msi
[2011-09-21:08:38:27] Rollback complete
[2011-09-21:08:38:27] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:38:27] Runtime Installer end with exit code 7
[2011-09-21:08:38:38] Runtime Installer end with exit code 7
[2011-09-21:08:38:58] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:38:58] Commandline is:
[2011-09-21:08:38:58] No installed runtime detected
[2011-09-21:08:39:02] Relaunching with elevation
[2011-09-21:08:39:02] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air22cc.tmp\adobe air installer.exe -ei
[2011-09-21:08:39:04] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:39:04] Commandline is: -stdio \\.\pipe\AIR_7868_0 -ei
[2011-09-21:08:39:04] No installed runtime detected
[2011-09-21:08:39:05] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:39:05] Installing msi at c:\users\phil\appdata\local\temp\air22cc.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:39:05] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:05] Rolling back install of c:\users\phil\appdata\local\temp\air22cc.tmp\setup.msi
[2011-09-21:08:39:05] Rollback complete
[2011-09-21:08:39:05] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:05] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:05] Runtime Installer end with exit code 7
[2011-09-21:08:39:08] Runtime Installer end with exit code 7
[2011-09-21:08:39:37] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
[2011-09-21:08:39:37] Commandline is:
[2011-09-21:08:39:37] No installed runtime detected
[2011-09-21:08:39:43] Relaunching with elevation
[2011-09-21:08:39:43] Launching subprocess with commandline c:\users\phil\appdata\local\temp\airb885.tmp\adobe air installer.exe -ei
[2011-09-21:08:39:46] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:39:46] Commandline is: -stdio \\.\pipe\AIR_6488_0 -ei
[2011-09-21:08:39:46] No installed runtime detected
[2011-09-21:08:39:46] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:39:46] Installing msi at c:\users\phil\appdata\local\temp\airb885.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:39:47] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:47] Rolling back install of c:\users\phil\appdata\local\temp\airb885.tmp\setup.msi
[2011-09-21:08:39:47] Rollback complete
[2011-09-21:08:39:47] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:47] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:39:47] Runtime Installer end with exit code 7
[2011-09-21:08:42:54] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:42:54] Commandline is:
[2011-09-21:08:42:54] No installed runtime detected
[2011-09-21:08:42:58] Relaunching with elevation
[2011-09-21:08:42:58] Launching subprocess with commandline c:\users\phil\appdata\local\temp\airba4a.tmp\adobe air installer.exe -ei
[2011-09-21:08:43:01] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:43:01] Commandline is: -stdio \\.\pipe\AIR_7176_0 -ei
[2011-09-21:08:43:01] No installed runtime detected
[2011-09-21:08:43:01] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:43:01] Installing msi at c:\users\phil\appdata\local\temp\airba4a.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:43:01] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:43:01] Rolling back install of c:\users\phil\appdata\local\temp\airba4a.tmp\setup.msi
[2011-09-21:08:43:01] Rollback complete
[2011-09-21:08:43:01] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:43:02] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:43:02] Runtime Installer end with exit code 7
[2011-09-21:08:43:03] Runtime Installer end with exit code 7
[2011-09-21:08:43:09] Runtime Installer end with exit code 7
[2011-09-21:08:48:47] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:48:47] Commandline is:
[2011-09-21:08:48:47] No installed runtime detected
[2011-09-21:08:48:55] Relaunching with elevation
[2011-09-21:08:48:55] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air1b9b.tmp\adobe air installer.exe -ei
[2011-09-21:08:48:55] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:48:55] Commandline is: -stdio \\.\pipe\AIR_5568_0 -ei
[2011-09-21:08:48:55] No installed runtime detected
[2011-09-21:08:48:56] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:48:56] Installing msi at c:\users\phil\appdata\local\temp\air1b9b.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:48:56] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:48:56] Rolling back install of c:\users\phil\appdata\local\temp\air1b9b.tmp\setup.msi
[2011-09-21:08:48:56] Rollback complete
[2011-09-21:08:48:56] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:48:56] Runtime Installer end with exit code 7
[2011-09-21:08:49:26] Runtime Installer end with exit code 7
[2011-09-21:08:56:37] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:56:37] Commandline is:
[2011-09-21:08:56:37] No installed runtime detected
[2011-09-21:08:59:53] Relaunching with elevation
[2011-09-21:08:59:53] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air41b1.tmp\adobe air installer.exe -ei
[2011-09-21:08:59:53] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:08:59:53] Commandline is: -stdio \\.\pipe\AIR_5656_0 -ei
[2011-09-21:08:59:53] No installed runtime detected
[2011-09-21:08:59:53] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:08:59:53] Installing msi at c:\users\phil\appdata\local\temp\air41b1.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:08:59:53] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:59:53] Rolling back install of c:\users\phil\appdata\local\temp\air41b1.tmp\setup.msi
[2011-09-21:08:59:53] Rollback complete
[2011-09-21:08:59:53] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:59:53] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:08:59:53] Runtime Installer end with exit code 7
[2011-09-21:09:07:06] Runtime Installer end with exit code 7
[2011-09-21:09:07:39] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:09:07:39] Commandline is:
[2011-09-21:09:07:39] No installed runtime detected
[2011-09-21:09:07:44] Relaunching with elevation
[2011-09-21:09:07:44] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air62c8.tmp\adobe air installer.exe -ei
[2011-09-21:09:07:44] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-21:09:07:44] Commandline is: -stdio \\.\pipe\AIR_7504_0 -ei
[2011-09-21:09:07:44] No installed runtime detected
[2011-09-21:09:07:44] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-21:09:07:44] Installing msi at c:\users\phil\appdata\local\temp\air62c8.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-21:09:07:44] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:09:07:44] Rolling back install of c:\users\phil\appdata\local\temp\air62c8.tmp\setup.msi
[2011-09-21:09:07:44] Rollback complete
[2011-09-21:09:07:44] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
[2011-09-21:09:07:44] Runtime Installer end with exit code 7
[2011-09-21:09:07:59] Runtime Installer end with exit code 7

I'm sorry you're running into installation issues with AIR. Microsoft has just released a new utility that can help resolve installation problems. Would you mind giving this a try and let us know how it works for you? When running the Fix it, go through the uninstall process and try to remove Adobe AIR from your system. Once finished, download the latest version of AIR and install again.
Microsoft Install and Uninstall Fix It
If you still encounter problems, I created a vb script called AIR zapper that might also help. You can find it on this post: http://forums.adobe.com/message/3737276#3737276
Thanks,
Chris

Adobe Revel 2.3.2 installation issue

Dear Revel users:
We are aware of the installation issues people are experiencing with the latest iOS version release, and we are very sorry for the inconvenience it has caused.
We do rigorous testing prior to all releases, but unfortunately an unexpected interoperability issue has occurred with the way our App is getting bundled up for delivery to customers. We are working closely with Apple to resolve the issue as soon as possible, and we've re-submitted an update to see if this can help us narrow down the failure. Thank you for your patience. Meanwhile, feel free to access Revel via your web browser, Mac, windows 8, Android devices.
I will update this thread when I get new information.
Regards,
Pattie

Dear Revel users:
As you may know, many users had issues installing Revel iOS update version 2.3.2. We are pleased to inform you that the issue has been resolved. We know how frustrating it must have been to not be able to access your photos and videos, and are truly sorry for all the inconvenience.
Please go to the App Store and update your app, and thank you for your patience as we worked to resolve the issue. Please ensure that your operating system is on iOS version 7.1 or above when updating the app. We do rigorous testing prior to all releases, but unfortunately an unexpected interoperability issue occurred with the way our App was getting bundled up for delivery to customers.
If you are unable to upgrade to iOS version 7.1 or above at this time and can not load revel from the app store on your device, please download the latest version of the Adobe Revel app from iTunes to your computer and sync it to your iPhone, or iPad. If you are unfamiliar with this process, please plug your iOS device in to your computer with the USB cord that came with your device. Launch iTunes on your computer and select help > iPhone or ipad user guide. There are help topics there that will explain how to connect and sync your device.
If you have any more questions or are still experiencing problems, please go to our user forums and post to this link : https://forums.adobe.com/thread/1513106. Again, please accept our sincerest apologies and thank you for your patience.
The Adobe Revel team

MSI K9A2-Boot Problems & Installation Issue

In putting together a new system, see sig, I decided to go with the MSI K9A2 board. I have used MSI and Abit boards for a number of years and this is the first time I have had to post about an MSI board giving me fits, apparently. I say apparently because my troubleshooting has me looking hard at the board. I assembled the system, originally with Crucial Ballistix Tracer PC6400 memory and the system failed to POST. Having read some posts about memory issues, I had verified that this memory should work. I did a lot of troubleshooting on the board. I will admit that I was a bit surprised by the power on button that is actually on the board. I reset the CMOS (using the directions posted in these forums), reset and checked connections (yes, both the extra CPU and Graphics power connectors were attached) and finally resorted to stripping out everything but the MB and essential components onto a tabletop. This also produced a no POST. Lastly, removed one of the RAM modules, so that only one RAM was in the MB in DIMM slot 1. Hit the power button and the system posted. At this point I did not do much with the BIOS other than insure that the CPU and temps were ok. I loaded optimized defaults, saved, rebooted and powered down. I added the second DIMM module and no POST. I removed the second DIMM, powered up the system, received a chksum error, hit F1 and went into the BIOS, loaded defaults and it would boot on one DIMM with no chksum errors. Confirmed this behavior a couple of times.
Ok. So now I am looking at memory. I ran out and purchased the DDR2 memory in my sig and installed it into the MB. POSTed on the first run. I was optimistic at this point that the issue was solved and I moved onto installing Windows XP. Hard drive is recognized and in SATA 1 and the DVD drive is in SATA 2. Windows loads the installation screens and everything goes well, until it finishes formatting and starts to copy the files. At this point it hangs at 3%. After many iterations of it hanging I went back and stared at the memory. I went into the bios and set it at 4-4-4-15 and 2.1V. As I had been around this horse a number of times I tried the install again, using a 20GB partition after updating the BIOS and it formatted and started loading Windows. (This is were I should have just let it go....) As I wanted the primary partition to be greater than 20GB, I blew that away and went for a 70GB partition......and we hang at 3% again. When it hangs it is failing to copy a *.tss file.
At this point I am looking at the MB and thinking....RMA.
Two new pairs of memory and the hanging at 3% are pointing me there, any comments?
Thanks,
R

Quadrifoglio,
SATA 1 is the first red port, but the manual is saying the red ports are on the SB600 controllor and that the purple ports (SATA 5 and 6) are on the Promise controller. I am currently using the OCZ memory as it allowed the system to POST without any issues on the first time around with both sticks installed.
The HD is currently on the SATA 1 slot, which is red SB600 controller.
Aaron,
I have not backed down the memory timings yet as I have been able to post and I did manage to load Windows on a 20GB partition. I will keep this in mind if I continue to have issues, but I would like to keep them at their factory settings (I guess b/c it makes me feel like they are "working" as they should).
General
I would like to have the DVD drive in the equation, so if I am switching the HD to the purple SATA ports should I move the DVD drive there as well? Or what I probably should do is leave the CD-ROM on the system (which is currently attached via an IDE cable) and just fiddle with the HD for now.
Memory in the system now: OCZ with timings and voltage set to defaults for the memory.
So, my plan for tonights activities;
1. Leave the HD on the red SATA 1 controller (SB600).
2. Leave the CD-ROM attached to the IDE controller.
3. Enter the BIOS and tell it to operate the drive in IDE mode.
4. Remove all current partitions, reset partitions with the system partition set to 70GB
5. Format and attempt installation.
If that fails
1. Move the HD to the purple SATA 5 controller (Promise).
2. Leave the CD-ROM attached to the IDE controller.
3. Leave the BIOS setting at IDE mode.
4. Remove all current partitions, reset partitions with the system partition set to 70GB
5. Format and attempt installation.
If that fails
Drink heavily and watch TRON, 'cause if I was TRON I could fix anything.
A couple of questions;
-This maybe a silly question, but do I need to specifically tell the BIOS to enable LBA, even for SATA drives? I do not recall having to do this in a previous build using an Abit MB and SATA drive.
-Will I go back into the BIOS, if and when Windows loads, and tell the HD to run in what mode?
-Are there any other BIOS settings that I am overlooking?
-UPDATE: Quadrifoglio or anyone, When the BIOS has an option for AHCI (like the K9A2 does and you can select AHCI, IDE, etc.) by leaving it on Auto with a SATA drives present (HD and Optical Drive) does the possibility exist that Windows XP will hiccup on install because it does not understand AHCI? Some of the information I have come across seems to suggest this maybe an issue.
Thanks for folks looking at this problem/scenario. I have been building systems for awhile and this one is taking me back to the first system I ever built in '96 were I could not for the life of me figure out why the darn system was unstable, not recognizing my HD's, BSODing on me. The solution in that case, install chipset drivers. duh.

Neo4 platinum installation issues part 2

Okay, well last night I finally got my new neo4 platinum board to recognize and boot with the cd rom drive that I had attatched, as well as run through all of the POST without any issues. Now I have another one.
I'm reinstalling XP on the hard drive that I'm using (which is now blank and reformatted) and I can get past the initial "blue screens" wherein you choose the partition to install to and XP loads up all of the preliminary files etc. However, when it asks to restart and says that the "installation will continue" once the restarts is complete it boots back up and freezes on the "Accessing DMI data pool" (i think that's what it says, something like that anyhow) and then doesn't move. If I reboot again after that and try and boot off of the cd again, it just takes me through the initial setup steps all over again. I have no idea what the problem is and am completely stumped. Any suggestions?
mobo: K8N Neo4 Platinum
HDD: SAMSUNG SpinPoint P Series SP0802N 80GB 7200 RPM IDE Ultra ATA133 Hard Drive
CPU: AMD 64 |4000+ ATHLON 64 939 - San Diego Core
CD-DVD: NEC Black IDE DVD Burner Model ND-3520A
Ram: CORSAIR XMS 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 400 (PC 3200)
GFX: eVGA GeForce 7800GTX 256mb pcix
PSU: Antec 430W TruePower

Quote from: Bowen on 15-July-05, 22:29:53
Well it could be a few things. Can you tell if the computer is running hot at all? These are just things you need to check off even if you might not think it would affect it. Is your memory the same? Did they come in one package? Also, is the first one (closest to the CPU) in the green slot and the second one in the purple slot. This doesn't necessarily have to be that way (that is toward the front) but when something's not working correctly, you want to make sure everything is installed as recommended until you get your problem nailed down. I know your probably not doing this but don’t overclock either.
Oh hey, I just noticed something about your specs. I see you have an Antec 430 Watt PSU. Is it a AGP (20-pin) or PCI-E (24-Pin) PSU? The older 20 pin connectors are supposed to work with PCI-E mobo's but that doesn't mean that it will. I'm not certain but if that's your old PSU you were using with your AGP mobo, I bet that's your problem!
You can pick up a good PCI-E PSU at Monarch Computer. A good PSU for a cheap price, which I have BTW. It's a Enermax 530 Watt PSU, PCI-E of course and it's only $80! http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=M&Product_Code=100122&Category_Code=ps-500 or if you want to stay with Antec, try this one but it's more expensive: http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=M&Product_Code=100241&Category_Code=ps-500
Crap. I really hope it isn't my PSU. I just bought the stupid thing two days ago, and yes it IS a 20 pin connector. I'm using the adapter thing that converts to 24 so I figured that there wouldn't be an issue. Would this really cause it to freeze up like that? The other thing that I've noticed is that during the installation processes there are some LONG pauses in "action." A few times I actually thought that it froze up on me, but walked away for awhile and came back and saw that it had advanced. Until it gets to the "DMI" message and then it craps the bed for sure.
:::sigh::: I've had these parts for three days now and haven't been able to play with them. I've got Far Cry, Half life 2 and BF2 all waiting to be played on max settings but I just can't get the darn thing to run.
Someone else mentioned awhile back that my PATA hard drive might be dated enough that the mobo just doesn't like it. I really really don't want to spend a whole lot more money on this thing, but obviously will if I have to.
If anyone out there has any ideas or can offer any advice, I'd love to hear it. I just want to get this thing fixed.

Post SCCM Installation Issues

Similar Messages

Maybe you are looking for