Post-spill overheating - what can I do?

Last night, I spilled some sticky soda-type drink on the top left hand corner of my keyboard, and made the ridiculously stupid mistake of plugging in the (wet?) power chord. At this point, I thought all hope of recovery was lost.
I shut it down and booted it up repeatedly, each process getting to various levels (sometimes start screen, sometimes desktop, sometimes even apps running). Then after shutdown and restart for the nth time the computer died for good, and pressing the power button only gave a few low clicking sounds from inside; no reaction onscreen.
Every now and then though, it boots up and runs almost normally. The fan is just working up like crazy. I assume I ought to take it in for a clean, but I wouldn't mind clarification. Any idea as to why after dying, it occasionally boots up and runs normally (and indefinitely)? It seems a bit random to me. Also, is there anything I myself can do from home?
Thanks for your help, I'm hoping this one survives! Lesson learned, folks. I just hope it's not too late.
Cheers!

I suspect there's still liquid or glop inside the machine. Your second-worst mistake (after the spill itself) has been repeatedly trying to power up the machine before making sure it was completely dry. Unless you're incredibly lucky, something has already been fried, and in any case you're in for an extremely expensive repair. The sooner you get it in for the necessary work, the sooner you'll either get it back with all its gooey parts replaced or decide it isn't worth fixing and needs to be replaced.
Food and drink don't belong anywhere near a computer.

Similar Messages

  • I'm finding that my ipad4 with retina display appears to be overheating what can I do

    My iPad 4 with retina display appears to be overheating as at times it becomes quite warm what can I do

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

    I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

  • HT1349 My daughter just spilled 1/2 glass of water on her macbook.   What can she do?

    My daughter just spilled 1/2 glass of water on her macbook.  What can she do?

    Orient the computer vertically on its side so that water can drain out but leave the lid open as much as possible
    Leave it that way for a few hours
    Use a hairdryer to dry things out for another 30-60 minutes from all angles
    Leave the device off all night with a fan blowing on it
    Try to power up in the morning
    At that point, the Mac will work OK, or you will know that you need to head to the repair shop
    Or better yet, take the Mac to the repair shop first and let them power it up.

  • My iphone 4s keeps overheating and will not let me go on any of my apps as well as send any messages. plus my contract isn't up for another 6 months, what can i do?

    My iphone 4s keeps overheating and will not let me go on any of my apps as well as send any messages. plus my contract isn't up for another 6 months, what can i do?

    RESOLVED!!! I logged on to my Straight Talk online account, and did a Tech Chat. They immediately gave me a direct phone number and a Reference PIN number and asked me to contact their iPhone specialty support. I called (of course the gentleman's accent was very difficult for me to understand, but managed with asking continually for clarity). He walked me through several tests, setting changes and had me get on my wifi to obtain the latest APN settings. None of his efforts worked ad it was obviously NOT my Straight Talk iPhone 5, 64GB CDMA (no SIM) - it was something with their setting on their end on my account. I was placed on hold a few times and he would come back on to have me try to get on Safari and even Google... after the 3rd on-hold, he returned and asked me to try to use my data again without the wifi turned on and BINGO it worked... I still do not have my wifi turned on and I'm still receiving texts from YESTERDAY too while I was away from wifi service. IF you come across this issue - please call Straight Talk and/or log on to your Straight Talk online account and talk to an online customer service representative and get their direct line phone number for iPhone support and have your Reference PIN number available. Good Luck

  • I spilled wine on my laptop keyboard. Now it won't turn on. What can I do?, I spilled wine on my laptop keyboard. Now it won't turn on. What can I do?

    II spilled wine on my laptop keyboard. Now it won't turn on. What can I do?, I spilled wine on my laptop keyboard. Now it won't turn on. What can I do?

    Don't attempt to turn it back on.  Remove the battery if you have a user removable battery.  Take the mac to an Apple Store or AASP and expect a very large repair bill.  More times then not, a liquid spill on a keyboard results in a damaged logic board, which usually costs several hundreds of dollars to replace.  Liquid damage is not covered under warranty if you have AppleCare.  Check with your renters/homeowners insurance to see if it may be covered.

  • I accidentally spilled tea on my macbook and the keyboard is sticky, I took off the key "A" and now I can't put it back on. What can I do or where can I take it so it can be fixed?

    I accidentally spilled tea on my macbook and the keyboard is sticky, I took off the key "A" and now I can't put it back on. What can I do or where can I take it so it can be fixed?

    So is that key the only thing that does not work? How much tea was spilled and did it dry out completely or ? Was there sugar in the tea?
    If the key is the only thing, I'd take it to the nearest Genius Bar and ask if they could pop it back in.

  • We use one windows machine and two mbp's (post 2012) at home. We have a modem *** router from a  non apple vendor that airport utility finds and connects with absolute ease. But doesn't stay connected. The signal drops often, what can I do?

    We use one windows machine and two mbp's (post 2012) at home. We have a modem *** router from a  non apple vendor that airport utility finds and connects with absolute ease. But doesn't stay connected. The signal drops often, what can I do?

    No, not all network clients -- only the two mac portables and they run together very rarely. The windows machine is hardwired to the modem router combo, and that's always sailing smooth. The mbp that is most used is perhaps 20 feet max from the router - and in another room. But it also happens when I take in into the same room as the router. On occassion, I have noticed while using network diagnostics, that one digit in the IP number sometimes appears to go awry. I then try to set up manually - and it works for a bit but is hugely erratic.
    I rigged a hand me down airport express and set up a separate network for the two macs and it ran beautifully for some weeks, but that little piece is now dead and none of the retailers in my suburb seem to have one in stock. I don't want to be forced to buy an airport extreme and here in India, there's no trustworthy online ordering option.
    The man from the ISP's been here several times and I don;t think it is a modem/dsl issue because the smartphone connects and the macbook drops when both are the same distance from the router? I am truly foxed and intensely irritated! :-(

  • What can I do with jpeg files in post production ?

    I accidently shot all my vacation photos in jpeg. What can I still do or not do in processing them in Light room?

    Lightroom/PV2012 does an awesome job on jpegs too. It doesn't have all the same data to work with as raws, so can't real the highlights in as well etc. but can buff 'em up pretty good... - try it!
    I could give a more complete and detailed list of differences (e.g. camera profile & white balance), but you'll be discovering them shortly anyway .
    In general: there are a few less options and you can't push 'em as hard - edits may need to be more "restrained" (conservatively applied).
    ~R.

  • My iPhone overheated whilst charging, and won't let me turn it on or charge anymore. What can I do?

    I was using my iPhone 4, with the Skype app open, when the iPhone overheat message popped up. I let it cool down before I began using it again, only to find that it won't charge, and now the charge's completely exhausted, I cannot open my phone at all, and I cannot get it charged either. What can I do?

    Hello Eena23,
    Thank you for the details of the issue you are experiencing with your iPhone 4.  I would be concerned too if my iPhone was not powering on.  I found an article with steps you can take when you encounter an issue like this.  I recommend following the steps below:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • What can be don with theese 10000Mips? Please Post back

    I want to by an X-Fi Soundcard.
    Is it possible, foraexample, to set up a few parametric equalizers for each audio channel?
    If yes, how many?
    The X-Fi site tells about the instruction set and the architecture of the chip. Is it possible to write own "Soundshaders"? I mean own effets, which can be processed in Hardware and can be aplied to all 2D and 3D voices.
    Nvidia has this FX-Studio to develop FragmentShaders for their Graphiccards.
    I simply can't believe that the "entertainment mode" uses up all resources of this chip. A 0band Equalizer is for me something to laugh at, you know.
    I want to compensate all the parasitic effects in my room.
    I want to correct the resonaces, the frequency plot of my speakers(down to 25Hz if possible), of course the resonances of my speakers.
    If you tell me, that it can't be done in gaming mode, because of performance lacks. That wouldn't be a problem, as i only intend to listen to music.
    Can anyone tell me what can be done and what can't.
    I simply want to know, what this soundcard can do for me, before i intend to spend a few hundred bucks on it.
    I hope anyone replys!
    Thanks in advance
    MadMartin

    MadMartin wrote:
    I want to by an X-Fi Soundcard.
    Is it possible, foraexample, to set up a few parametric equalizers for each audio channel?
    If yes, how many?
    The X-Fi site tells about the instruction set and the architecture of the chip. Is it possible to write own "Soundshaders"? I mean own effets, which can be processed in Hardware and can be aplied to all 2D and 3D voices.
    Nvidia has this FX-Studio to develop FragmentShaders for their Graphiccards.
    I simply can't believe that the "entertainment mode" uses up all resources of this chip. A 0band Equalizer is for me something to laugh at, you know.
    I want to compensate all the parasitic effects in my room.
    I want to correct the resonaces, the frequency plot of my speakers(down to 25Hz if possible), of course the resonances of my speakers.
    If you tell me, that it can't be done in gaming mode, because of performance lacks. That wouldn't be a problem, as i only intend to listen to music.
    Can anyone tell me what can be done and what can't.
    I simply want to know, what this soundcard can do for me, before i intend to spend a few hundred bucks on it.
    I hope anyone replys!
    Thanks in advance
    MadMartin
    8 simultaenous realtime effects.
    X-Fi Raw Data Path MIPs
    SRC..........730
    Filter.......200
    Mixer........20
    Tank.........440
    DSP..........80
    Total........0340
    Ref.
    jutapaMessage Edited by jutapa on 02-24-20062:20 PM

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • I did made a copy of all my CC programms. for using on my other workstation. now is the CC desktop app not syncing the programme information. it do not see or sync the installed programms properly. what can i do. i do not want to download the hols set. be

    I did made a copy of all my CC programms. for using on my other workstation. now is the CC desktop app not syncing the programme information. it do not see or sync the installed programms properly. what can i do. i do not want to download the hols set. because of a slow connection

    If you are getting emails from these forums then you probably accidentally clicked on one of the links on the forums page where all the questions are listed e.g. at the top right of each forum's page there is text box with Actions and Notifications in :
    So far you've posted in the iTunes Store forum :
    https://discussions.apple.com/community/itunes/itunes_store#/
    And the Using iPad forum :
    https://discussions.apple.com/community/ipad/using_ipad#/
    If on either of those forums that box says 'stop email notifications' instead of 'receive' then click on it and it should stop that forum sending emails to you.
    There are full instructions on this page for stopping emails, as there are other places where they might have been set 'on' :  https://discussions.apple.com/docs/DOC-3661
    This is your original post for iTunes Match : https://discussions.apple.com/message/22647293#22647293
    And this page lists your posts (you can click on each post on it to be taken to it's thread) : https://discussions.apple.com/people/suzettemg?view=overview

  • Lenovo System Update fried my BIOS... What can I do?

    Hi all,
    I'm in a bind. I did a clean install of Vista, and then I ran ThinkVantage System Update. It pulled up the BIOS update as a critical issue (among others) and so I consented to install it. The problem is, halfway through the update process, it stopped responding. I gave it two hours, then, thinking that it might be okay (the updater hadn't gotten to "erasing old BIOS" or whatever...) I rebooted it.
    Four beeps and then nothing. Nothing.
    I took it to my university's ITS department, and they recommend a system board replacement. I can't afford that.
    I was wondering if there was a way that I could reflash the BIOS myself, or if I had to send it to depot, what sort of time and cost I am looking at. Can anyone advise me on what I should do?

    Have you contacted support as ProblematicT61p did?
    By doing so it looks as though they got their problem was solved.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Dont work adds of translation to me for example: quick translation, they is installed but not traduce any thing all the adds work less translations what can i do ?

    please i love mozilla and there is times what i want to translate any text from english to spanish but nothing i tve tried all the adds to translate but no load they is installed in my browser but simply dont work. tell me what can i do ?

    Everyone reading your posts here is just another MacBook Pro user. We're all volunteers, not Apple employees. No one here can speak for Apple.
    In my personal opinion, buying Apple products in a country where Apple has no stores and no corporate presence is a risk that the buyer takes knowingly. I don't think it's a wise risk, and I don't recommend that anyone take it. A small percentage of the products sold anywhere are going to have problems, and it makes more sense to buy an inferior product that can at least be serviced locally than to buy a superior product that may have to be sent thousands of miles for repair if anything ever goes wrong with it.

Maybe you are looking for

  • Assigning a value to a constant in Calc Script

    Hi All, I'm trying to assign a value to a constant in a calc script, but not able to make it work. I need to get a user entered value from the database such as Indexation Value, and use that many times in my script. Rather than use: "member1"->"membe

  • Selecting from external table

    Hi, I have an external table with 3 data files. How can I define by the select statement from which data file I'd like to select, is it possible at all? ( like at partitioned table I can define the partition name in the select statement) Is there a l

  • Why is there a maximum email attachment size?

    I can understand why there is a maximum MMS file message size but why is there a maximum email attachment size set by the handset? The limit is preventing me sending pictures from my phone. MMS messages are charged at a flat rate but GPRS data is cha

  • Function to get the last day of the current month

    Hi friends Now I need to know a function to get the last day of a month. I had between my notes that function but I do not find it and I think you can give the answer faster. Thanks Joel Pérez DBA Oracle

  • IPA unicode text in flash through shared fonts

    hi Can any one tell how to access IPA unicode text from xml file I use shared object concept in flash cs3 but still i can acess text of "02A4" this hexadecimal values you can read view IPA text from http://www.phon.ucl.ac.uk/home/wells/ipa-unicode.ht