Post System Copy Process
Hello,
We are getting ready to install new servers and we will be performing a homogenous copy process to the new servers which will have new names and ID on the network. We would like to run the new servers side by side with the current system so we can test. My questions are:
1) With the systems running on the network together and we are ready to cut over to the new servers, would I just need to backup and restore the DB to the new DB server? Or do I have to go through the whole system copy process again?
2) The first process we are using the R3Load because we have SQL 2000/Windows 2000. I understand the System Copy process with the Export file and then the migration (import) file, but do all of the post processes that are involved according to the System Copy guide have to be implemented again if I am able to simply restore the DB after doing the inital copy as described above?
3) Any thoughts to how I can accomplish running the servers together for awhile for testing then cutting over to the new ones? Any quick notes from the field that would help make this easier?
Thank you all so much,
Jason
>ERROR => DpHdlDeadWp: W14 (pid 3018) died http://dpxxdisp.c 14531
the Work process are getting terminated.
can you please paste full log from dev_w0 and dev_disp and std*
>we upgraded the new kernel
why don't you use the same kernel as same as source system?
cheers,
-Sunil
Similar Messages
-
ABAP +JAVA system copy process
Hello All,
We are in process of building a server from a existing ECC 6.0 ABAP + JAVA system.
We are using system copy process where we are restoring ABAP databse from source system.
My question is about the JAVA part.
How can we copy java part? Can we export only JAVA part from ECC 6.0 ABAP +JAVA system and import this to target server.
Please suugest the process.
Regards,
ManishHi Manoj,
When you are doing restore of your P(DUAL stack)system then it will automatically restores your ABAP and JAVA scehema table spaces(Normal usage).And If you are using sapinst then take a CI export(for file system/java settings etc) of your source system and then you have to import that in your target system later in the process.So this procedure will automatially serve for both ABAP and JAVA schemas. Importantly this procedue was highly recommended by SAP,so if you run into any issues then you can go ahead and raise a OSS msg.
Other guy already pasted the link for homogenious copy guides
But you can do your java export from command level also(with out using SAPINST) and later you can import it into your target system.This means you are exporting your JAVA schema table space and importing.Keep it in mind that you have to export your Target java scehema not source system .If you do so then its of no use because you have to perform all post steps for java stack also. You can export and import table j2ee table space from your OS level at DB host using "exp javascehma/pwd ........."(not a full fledged command) and then you do the same by perforing "imp........." after restore and recovery from your P(source) system.But this is not at all recommended by SAP but this will work!.
Let every one to know if you need anything more than this. -
System copy process of XI server
Hi
In our XI landscape, we have XI development server and XI production server. We would like to create the
XI Quality instance for testing. Also we want to refresh XI devepolment server from XI production server.
Here XI 3.00 is installed on Unix platform with Oracle 10g database (SAP WebAS 6.40).
Pls let me know the following:
1. Can i create the XI quality server with System copy option from XI production server? or do i have
to create XI quality server with the new installation? What would be the best option?
2. I 'm not able to get the system copy process of SAP Web AS 6.40 for XI. Pls forward me system copy
document or send me SAP link for the same. I have the System Copy document for system based on SAP NW 2004s SR1 ABAP+ JAVA. Can i use this document?
Thanks
Amarhi check the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cd76e07d-0c01-0010-298d-f699863f2ce4
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1532f46-0a01-0010-bc88-af3272254881
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/200ebc93-dabe-2910-c1a6-c4ec30b20e04
note:award points if found helpfull
regards
chandrakanth.k -
BW Powered On HANA - System Copy Process
Dear HANA Gurus,
Now we are on HANA 1.0 SPS03 Rev.21, and we also have a BW 7.3 SP05, running on Windows 2008 64 bit server, on Oracle 11.2.
We want to migrate the BW to HANA DB. Refering to note 1600929 (which is version in revision), the Export method with system copy (using HANA special options) seems fine.
However, not sure how the Import will be done in HANA? We will be creating a new BW on Windows again, and if it is system import it'll again create an Oracle based instance!
When and where it migrates to HANA DB?
Regards
Manish MadhavHello,
HANA conversion is heterogeneous system copy process (DB migration). You will export system on Oracle and then you will import into HANA. Of course you need to have proper CDs.
Here comes important question - did you signed up for SAP rampup? BW on HANA is not yet in Global Availability and only some customers are allowed to participate.
You can find required CDs at this location:
http://service.sap.com/swdc
Software Downloads
Installations and Upgrades
Browse our Download Catalog
SAP NetWeaver and complementary products
SAP NetWeaver BW 7.3 powered by SAP HANA
BW ON HANA INSTALLATION 1.0
Installation
Downloads
If you cannot see these CDs - then you are not part of rampup and you need to wait until Global Availability.
If you can see these CDs - then you need to download them and use them to perform import.
I did not yet have opportunity to perform conversion myself (we still need to prepare our system to meed the requirements) but from SAP guides it is apparent that SAP HANA database is installed on one server (appliance) while ABAP is sitting on second server. (In other words - you should not have ABAP on same server as HANA.)
Also note that only ABAP stack can run on HANA.
And installation guide (here is for Windows):
http://service.sap.com/~sapidb/011000358700001240932011E.pdf
In a standard system, all main instances except the SAP HANA database instance run on a single host.
See system copy guide for details:
http://service.sap.com/~sapidb/011000358700001299452010E.pdf
SAP HANA database is available for SAP NetWeaver 7.3 ABAP only.
Tomas -
XI 3.0 post system copy issue
Hi Experts,
We are using XI 3.0 on Windows and MSSQL platform, i have made system copy sucessfully from production system with process of DB restore for ABAP and Java Import, the new server is up and running both abap and java.
Problem : In the newserver when i execute the tcode sxmb_ifr it takes me to production server url and not the new server hostname url.
when i tried the http://newserver hostname.com:50000 it works fine. but from this url except home page every other link like exchaneprofile, SLD,IR and ID links still points to the production server host name.
Please look at the following post installation activities i have performed till now in new serverand please guide where else i have to change the host name in the new server.
Note: i did not cange the logical system assignment in scc4, beacuse i was not sure about the other problems we may face after directly assigning new logical system to the productive client in new server.
1. Run installation check: Administration u2192 System administration u2192 Administration u2192
Installation Check (transaction SM28).
2. Configure the Workbench Organizer (SE06) with the option Database Copy. This
releases all transport, repair, and customizing requests that have not been released in
the source system.
3. Configure STMS
4. In transaction RZ70, change the value for the host and the gateway service in the group box
Transport Information
5. Change the pipeline to the Integration Server by running transaction SXMB_ADM -> Configuration -> Integration Engine Configuration
6. Open Visual Administrator -> Change the new host name in the following
services -> Jcorfcprovider all the services
services -> SLD Suppiler
7. Host name Change in SLDAPICUST
Note: In the SAP system copy guide it says me to chane few parameters in exchange profile but when i go through the url http://newserver hostname.com:50000/exchangeProfile it takes me to production server, is there any option to change the exchange profile parameters ?
Please help me.
Thanks
Sonali
Subject modified
Read the "Rules of Engagement"
Edited by: Juan Reyes on Oct 31, 2008 9:48 AMHi,
the explanation of some of the thing you have written is clearly that the AII-Properties of the XI system have still not been switched.
The properties must be changed once - afterwards the URL to the exchange profile and all other URLs should become valid.
The key is therefore to change the exchange profile. Try please the to access the exchange profile by using the ip address or the fully
qualified name of the new server http://<newserver>:<port>exchangeProfile/connection.jsp
Did I get it right - you are redirected to the URL http://<oldserver>:<port>exchangeProfile/connection.jsp ?
Regards
Frank -
Activities post System copy - SAP CRM 5.0
Dear All,
We were having a 3 system (SAP CRM 5.0 SP8) landscape. CRM Dev(CRD), CRM Q (CRQ) & CRM P (CRP) on Oracle 10 and HP UX 11. We have the JDI 7 SP8 instance connected to the CRM dev systemand all the 3 systems were configured as the run time systems in the JDI.
Now we have added a new tier for the Intergation testing called CRM
IST viz CRI there by coming into 4 system landscape (CRD, CRQ, CRI,
CRP). The CRI server is a copy of the CRP box and has been just installed and given to us. We need to do all the post installation activities.
Can you please provide us the proper documentation/ccokbook/check points so as to what all steps to be carried out after this system copy. It would be highly appreciated if you can give us a proper documents & links. We need to give the system to the consultants and before that we need to carry out all the post refresh activities, please help us in this urgently.
Thanks in advance.
Awaiting response.
Thanks & Warm Regards,
Rajeet Mathur.Check
http://service.sap.com/systemcopy
and use both guides for NW2004s/7.0 ABAP and Java.
Markus -
Reducing time required for ABAP-only copyback (system copy) process
Our company is investigating how to reduce the amount of time it takes to perform a copyback (system copy) from a production ABAP system to a QA system. We use a similar process for all ABAP-only systems in our landscape, ranging from 3.1h systems to ECC6.0 ABAP-only systems on both DB2 and Oracle database platforms, and the process takes approximately two weeks of effort from end-to-end (this includes time required to resolve any issues encountered).
Here is an overview of the process we use:
u2022 Create and release backup transports of key system tables and IDu2019s (via client copy) in the QA system to be overwritten (including RFC-related tables, partner profile and IDOC setup-related tables, scheduled background jobs, archiving configuration, etc.).
u2022 Reconfigure the landscape transport route to remove QA system from transport landscape.
u2022 Create a virtual import queue attached to the development system to capture all transports released from development during the QA downtime.
u2022 Take a backup of the target production database.
u2022 Overwrite the QA destination database with the production copy.
u2022 Localize the database (performed by DBAu2019s).
u2022 Overview of Basis tasks (for smaller systems, this process can be completed in one or two days, but for larger systems, this process takes closer to 5 days because of the BDLS runtime and the time it takes to import larger transport requests and the user ID client copy transports):
o Import the SAP license.
o Execute SICK to check the system.
o Execute BDLS to localize the system.
o Clear out performance statistics and scheduled background jobs.
o Import the backup transports.
o Import the QA client copy of user IDu2019s.
o Import/reschedule background jobs.
o Perform any system-specific localization (example: for a CRM system with TREX, delete the old indexes).
u2022 Restore the previous transport route to include the QA system back into the landscape.
u2022 Import all transports released from the development system during the QA system downtime.
Our companyu2019s procedure is similar to the procedure demonstrated in this 2010 TechEd session:
http://www.sapteched.com/10/usa/edu_sessions/session.htm?id=825
Does anyone have experience with a more efficient process that minimizes the downtime of the QA system?
Also, has anyone had a positive experience with the system copy automation tools offered by various companies (e.g., UC4, Tidal)?
Thank you,
MattHi,
> One system that immediately comes to mind has a database size of 2TB. While we have reduced the copyback time for this system by running multiple BDLS sessions in parallel, that process still takes a long time to complete. Also, for the same system, importing the client copy transports of user ID's takes about 8 hours (one full workday) to complete.
>
For BDLS run, I agree with Olivier.
> The 2 weeks time also factors in time to resolve any issues that are encountered, such as issues with the database restore/localization process or issues resulting from human error. An example of human error could be forgetting to request temporary ID's to be created in the production system for use in the QA system after it has been initially restored (our standard production Basis role does not contain all authorizations required for the QA localization effort).
>
For the issues that you encounter because of system copy, you can minimize this time period as you would be doing it on periodic basis (making some task list) and you can make a note of issues that you faced in previous run. So, normally i don't count it as system copy time
Thanks
Sunny -
Dear Experts,
I am doing a homogenious system copy on ECC6 on windows plateform for STANDBY DATABASE .
I am some queries
1. I have taken the offline backup in sapbackup folder on source system ( backup taken on hard disk )
2. I have installed OS on target system .
3. Now I am installing Database oracle 10g on target system .
My query is
I will configure this system as a standy database for disaster recovery
1. in the starting of oracle installation , it is asking to give DATABASE SID
Is the SAP SID , database sid , schema should be same if we use the system as standby database ?
2. I have copied the sapbackup folder from source to target system .
It will ask to restore the backup in the mid of installation .
what will be the step by step process to restore offline backup from DISK.
pl. suggest.you mean to say
1. You have the install oracle and sap with with SID on target system with SAP's default database.
Fresh installation of sap on standby database server *not* system refresh . Is it ?
I was trying to make system refresh to create standby database server ( DR server ) . It is not required . am i right ?
2. Restore the backup using brtools or by manually copy the file to sapdata location.
After fresh installation of SAP , I have to restore the backup of primary server to standby server . Is it ?
3. Create the standby control file.
How ?
4. Apply archive the keep database in mount stage.
5. Apply archive to standby on regular basis.
You mean to say , i have to configure data guard for point 3 , 4 and 5 .
Pl. correct me -
Migration export dvd missing in system copy process
Hi
1. We are doing system copy of XI 3.00 server that is based on SAP
Web AS 6.40.
2. I'm following the "Homogeneous and Hetrogeneous system copy for SAP
System based on SAp Web AS ABAp 6.40 patch collection" document.
Document version is 1.1 - July 11,2007.
3. I'm using R3load tool for system copy (page 40 to 49). I exported
the database (XDV) as per guide and now trying to re-import in XQA.
4. Central instance in XQa has been installed successfully and not i'm
stuck while installing the database instance. Process is looking for
"Migration export" dvd that i don't have.
Anyone get the same error? If someone suggest me the dvd number, i'll downlaod it from sapnet.
Regards
AmarHi Elena
Thanks for all your help. Refresh process of XQA from XDV is almost completed. XQA is up and java is working. Visual admin/ configtool are working good.
I'm getting one problem. When i run tcode 'sxmb_ifr', it open the XDV link (http://dbcixdv:57000/rep/start/index.jsp) instead of XQA (http://rx2n1v1:57400/rep/start/index.jsp).
Also Integration repository, integration builder, SLD are all pointing to XDV server (dbcixdv).
I changed all setting (ID,IR, SLD, RWB) in 'http://rx2n1v1:57400:exchangeProfile' and it fixed our problem but it also chnaged the XDV setting. Now XDV link is pointing to XQA server.
Here XDV and XQA are in two different hardware server.
Let me update pls how to fix this problem.
Regards
Amar -
Synchronisation Points Post System Copy
Hi Gurus,
Can anyone pl. provide inputs on :
- What is Synchronisation Point after System Copy ?
i.e. Say if ECC PROD system is copied to ECC QAS. After this what steps ( High Level Overview ) needed to ensure that
connected systems perform ok ?
Any / ALL Inputs are welcome and highly appreciated.
Many Thanks,
Best Regards,
- IshanPost system copy steps are defined on the system copy guide.
Also theres lots of information about this already.
Please do some research before posting.
Regards
Juan -
Query Designer Issues Post System Copy
Hi All -
We have just performed a system copy from our production to our QA systems. Now, when we trying to view a report from Query Designer in our QA environment, we are being prompted for a username and password - which is trying to log in to our production environment! (I know this because I locked myself out of production trying to log in via our QA Query Designer). We've done all the BDLS runs, updated the RSLOGSYSDEST table poer OSS note 524554, and also updated the tRFC port in WE20. What do we need to do to be able to run a query out of the BW QA system?
Thanks for the assistance.
AbbyHi Abby,
Once you execute the query from designer you will get one URL generated in the explorer address bar here you will have to change the name of your production app server with quality app server then report will be executed on quality server.
But this is temporary solution, you will have to check with your basis team regarding this and they will have to change some setting in system table and next time onward the system will pick proper URL.
Regards,
Durgesh. -
DB2 Row compression activated - Any changes during System Copy process?
Hell All,
I have activated DB2 Row Compression.
Now i want to do a System Copy.
Any changes due to this feature in the regular System Copy procedure? Like using R3load fastload COMPRESS options?
Thanks,
BidwanHello Bidwan,
Please see the following blog regarding row compression:
/people/johannes.heinrich/blog/2006/09/05/new-features-in-db2-udb-v9--part-4
R3load has the new option '-loadprocedure fast COMPRESS'. Started with this option it loads part of the data, does a REORG to create the compression dictionary and then loads the rest of the data. This way the table does not grow up to it's full size before it is compressed. For more details see OSS note 886231.
Regards,
Paul -
Homogeneous System Copy process: PRD to QAS on MSSQL
We have a need to refresh our QAS system with a copy of PRD - the method I have been researching is a homogeneous database copy. I am having difficulty finding step-by-step documentation to carry this out for release R/3 4.6C.
The only client refreshes I have performed are through SCC9 or SCCL and the R/3 installation was done by a consultants - hence the need for good step-by-step documentation!
I should also note that our QAS system shares the same physical server as the DEV system.
Any assistance is greatly appreciated.> I am assuming that I would be restoring the PRD database over the QAS database - this is where I am looking for additional documentation.
Use
http://service.sap.com/systemcopy
all necessary steps (+ the mentioned notes) are described there.
Markus -
System copy - CUA how to keep (merge) some of the old target system users ?
Hi,
can anyone suggest if the following is possible and if so, the best way to enable the following within a CUA landscape :-
Standard SAP System Copy of Production to QA.
Cleanup of "Production" user master records in the QA system to remove users not required in QA.
Resend a set of test user id's which existed in the pre-system copy QA system (and still in the QA CUA master system) to the newly copied QA system to merge with the cleaned up QA user master.
Re-link the new QA system with the QA CUA master system to transfer the "merged" list of QA users into the QA CUA.
I've simulated the above on a test server but the process of sending down the sub-set of old QA test id's from the CUA master (using report RSCCUSND) does not create the users in the QA client even though the report itself appears to have transferred the users. Checking SU01 on the target CUA client shows no user has been created and there are no idocs passed from Master --> Client.
Other than either exporting the QA users to a transport before the system copy (for re-import after the system copy to replace the copy of the production user masters with the old QA list), or using the "production" users in QA following the system copy I can't seem to find a way of merging some of the old QA users with a cleaned up list of production users in the QA system post system copy.
If anyone knows of a way to do what I'm suggesting then please let me know.
Brian.Hi Brian,
I don't think there is an option, directly.
However what I would do is.
Before System Copy
On the QA Side:
1) Create a new client in the QA and only copy user masters in the empty client.
2) In this new client, keep only those users I need after client copy.
3) Take help from ABAP guys to include all usr* table entries (with MANDT field selected only for the new client) into a transport request and save it for later use.
On the Production Side:
1) Export user masters of the production client
2) Create a new client in Production and re-import the user masters
3) Work on the new client to cleanse the unwanted users.
4) Re-export the new user master of the new client and save it for later use.
After System Copy
1) Import the exported user masters from the production server , thus overwriting the client with the users selectively chosen from the production user master.
2) Import the transport request to merge the older users from the QA.
I know this is a crude way.. anyways..
Hope that helps,
Siddhesh -
Errors in TMS after system copy
Hi Guru's
I've just completed succesfully a client copy from PRD to QAS & reconfigured the transport routes.
I did the post system copy activities as shown below
1. Logon on to client 000 of the newly COPIED system with DDIC.
2. Execute transaction SE06
3. Select the Database Copy or migration option
4. Press the Post-installation Processing button.
5. When prompted Do you want to re-install the CTS? Press the Yes button
6. When prompted for the Source System of Database Copy?, make sure that the <SID> of the production system is selected. Press the checkmark button to continue.
7. When prompted Change originals from PRD to QUA?, press the Yes button
8. When prompted Delete TMS Configuration?, press the Yes button
9. When prompted Delete old TMS configuration?, press the Yes button
*10. When prompted Delete Old Versions of transport routes?, press the No button
Howver my developers are getting the errors below when working in DEV system. Its worth noting I didn't make any changes to the DEV system during or after the system copy
Object Checks
Object messages: R3TR PROG ZMM_SHIPPERS_GLOBAL_LE
Transport objects from package ZMMS to target QAS only
Error In Object Editing:
Choose a change request with target system QAS
Kindly assist
Thanking you
Edited by: Andale J on Oct 18, 2010 2:52 PMJuan
I deleted all the 3 systems from the transport routes & reconfigured afresh using a the standard 3 system landscape
I succesfully tested by
1) adding an entry into a table & transporting across the landscape
2) creating a role & transporting across the landscape
The two tests above worked well
The only problem is the errors mentioned earlier that are being encountered by the developers in the DEV system
Sunil
I 've restored the previous versions as per your instructions. Just waiting for the develpers to give feedback
Thanks guys
Edited by: Andale J on Oct 18, 2010 4:24 PM
Maybe you are looking for
-
How to print out time as hr:min:sec without AM/PM?
how to print out time as hr:min:sec without AM/PM since hr specifies AM/PM. Thank you. My first thought is that there exists a formatter to do this. My second thought is that if not I can convert the AM/PM in the DateFormat.MEDIUM to the right hour.
-
Java calendar works in IE but not in Firefox
This Java code works in IE but not in Firefox - any ideas - tks <pre><nowiki><TABLE bgColor=#ffffff border=1 cellPadding=0 cellSpacing=3 id=calendar style="DISPLAY: none; POSITION: absolute; Z-INDEX: 4; left: 28px; top: 365px"> <TBODY> <TR> <TD colSp
-
Business Object - Problem with client tool
Hi Everyone, We installed BO Enterprise XI 3.1 in Windows server but we'rehaving problem accessing it through Cient tool from different server. But when we log in in the same server, BO works fine as well as thru web log in.. Can you please help me o
-
Please help-converting 7 to 8 project
Can you convert a Captivate 7 project to Captivate 8 seamlessly? My videos will not play in Captivate 7 in the HTML browser but work when I tried in in Captivate 8. I''ve built the course in 7 and don't want to ruin anything converting to 8
-
I have some syntax errors in my code and am not sure if I have organised the init method correctly. I get a ')' error on the line before "public void updateLabel". I'm using j2sdk1.4.2_03 on WIn XP. Could somone help? import java.awt.*; import java.a