Post System Refresh Activity - BDLS run

Hi,
We have finished system refresh of a QA system from Production. We need to run BDLS now to convert the original Production logical systems to QA relevant logical systems.
I am short of understanding of this process. Can anyone please help me with the concept and process?
Thanks in advance,
Abdul

Hi Abdul Rahim Shaik,
BDLS will convert the logical system name for your PROD to QAS.
For eg:
Your source - PRDCLNT100
Your target - QASCLNT100
If you go to SCC4 in your QAS, u will see Prod logical system name for the client.
Once you run BDLS after system copy, logical system name exist in every table for PRDCLNT 100 will change to QASCLNT100.
Refer to below link for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/33/c823dbaea911d6b29500508b6b8a93/frameset.htm
Cheers,
Nicholas Chang

Similar Messages

Post System Refresh Activity

Hi All,
I did system refresh ( from PRD to QAS , platform Windows 2008 R2 and MSsql) the system was up and running fine. The system was absolutely fine for one day and the day after the DB crashed , not sure what happened, is there a way i can find the logs through which i can come to know what exactly happened. Also post refresh when i was trying to run BDLS , the job was getting cancelled , the job log showed there is another conversion already running , when i checked the tables the conversion had already happened . Please tell me can running BDLS which cancelled many times could be the cause for the DB crash, if yes where can i find the logs for this , if not what else could have happened that the DB crashed . Thanks for your responses in advance.
Regards
Mrigank Aditya

Hi Nainesh,
Thanks for the message , yes system is up and running fine , the DB team did a restore of Production data on Quality again , and i did the post refresh activities again , the issue what had happened last time was we were doing simultaneous refresh of two systems at a time , BI prod to BI qas and ECC prd to ECC qas , we had found a list of tables in BDLS which gets updated when we run BDLS and we run those tables only , unfortunately the files got exchanged , the ECC tables should have run on ECC machine and BI tables should have run on BI machine which didn't happen and it happened the other way round BI tables where run on ECC machine , due to which BDLS failed and the job got cancelled many times, which impacted the whole system conversion and logical update , which crashed the DB( i exactly don't know the reason what happened internally , still searching for it ) . At present the machine is up and running fine.
Regards
Mrigank Aditya

How can we automate the Post system refresh activities

All,
Just want to know if there is a way to automate most of the post system refresh activities that were done by Basis.
Please note that i am talking about Post System refresh activities.
Appreciate your responses.
Thanks,
Giri

It all depends on what you would like to do: you keep the same SID or is it a rename?
- you could plan 1 jobs on production after event 'Zafterrefresh" with following steps:
that runs a BDLS
that does a cleanup of the spools
cleanup application logs
Trigger the event after the refresh and that starts.
Depending on your system you can run multiple jobs in //
some actions will have to be done manually:
user import
TMS config
etc

Post system refresh, "Request IDoc : IDoc with errors added"

Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

IDOC Tables with Errors Post System Refresh

Hi Everyone,
Is there any Report or other way through which one can get List of IDOC Tables with Errors Post System Refresh.
Thanks,
Regards,
- Ishan

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

Can any 1 help reg Post system refersh activity

Hi
can any one help me regarding post system refersh activity?
Regards,
Siva

Hi,
license the machine,run se06,check the stms config,reasign logical systems,number ranges of the transport requests,recreate fax and mailing list,check printers,ditribution models,RFC,mailing list...
Regards
Umesh

Post Quality refresh activity in SRM

Dear Experts,
We are nearing to quality refresh in SRM7.02. I need to know the details on Post Quality refresh activity in SRM 7.02. like configuration in quality after refresh etc.
Please suggest. If you have any such documents ready please send it to my email ID:
[email protected]
Regards,
Abhishek

What exactly you want ?
Thanks
Ankit

System refresh activity in Development Box

Hi Guru's
I have requirement for system refresh activity in development system and i would like to know what are pre-activity required for this other than when compared to normal system refresh and also please share me any link or snote related to this
Regard
Mohammed Sayeed

Hi,
This is SAP business one system administration forum. Please find correct forum and repost your question to get quick reply.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

System Refresh activity

Does any body have a clear explanation for the system refresh activity.
and is System copy and refresh one and the same
if some one has steps please send them to me
thank u

Pavan ,
when you are performing the client copy you are coping the tables and indexes.
if your system have different patch level i way cause inconsistancy while client copy.
Please check this forun to clear the situation
Re: Error in Remote Client Copy
thanks
Rishi Abrol

Retain background jobs and its variants before system refresh activity

Hello All,
I am going to perform system refresh activity on quaity system on monday. Customer wants to retain the background jobs and its variants in the quality system. Please guide me and let me know the steps to retain the background jobs and its variants before starting the system refresh activity.
Regards
Subbu

Dear Subbu,
You have to export the TBT* Tables to retain the jobs. You can do this with R3trans:
1. Make Export file
2. Make Import file
3. Make Export in Q System before Systemcopy
4. Start Database and not SAP
5. Make Import in Q after Systemcopy
6. Start sap
1. Make Export file /tmp/export_cmd
export
file='/tmp/export_Q.dmp'
client=<your client>
delete from TBTCA
delete from TBTCB
delete from TBTCCNTXT
delete from TBTCCTXTT
delete from TBTCCTXTTP
delete from TBTCI
delete from TBTCJCNTXT
delete from TBTCJSTEP
delete from TBTCO
delete from TBTCO_V01
delete from TBTCP
delete from TBTCPV
delete from TBTCR
delete from TBTCS
delete from TBTC_SPOOLID
delete from BTCEVTJOB
select * from TBTCA
select * from TBTCB
select * from TBTCCNTXT
select * from TBTCCTXTT
select * from TBTCCTXTTP
select * from TBTCI
select * from TBTCJCNTXT
select * from TBTCJSTEP
select * from TBTCO
select * from TBTCO_V01
select * from TBTCP
select * from TBTCPV
select * from TBTCR
select * from TBTCS
select * from TBTC_SPOOLID
select * from BTCEVTJOB
2. Make Import file /tmp/import_cmd
import
file='/tmp/export_Q.dmp'
3. Make Export in Q System before Systemcopy
R3trans -w /tmp/Q_export.log /tmp/export_cmd
4. Start Database and not SAP
sqlplus "/as sysdba"
SQL> startup
or
startsap
stopsap r3
5. Make Import in Q after Systemcopy
R3trans -w /tmp/Q_import.log /tmp/import_cmd
If you want to undo this, start the export script in P system and the Import script in Q system.
Don't be afraid of the delete statement but without delete it doesn't work!
6. Start sap
startsap
Best regards
Willi Eimler

Post System Refresh

Hi Guru's,
I needed to know what are important BI steps to go through (for system check up) after the system refresh.
In this case, the testing box has been refreshed from the production.
Thanks, Akash

hello,
After the refresh, the connection with the source system gets lost.You need to:
1.restore source system connection
2.activate and replicate datasources
3.Run program RS_TRANSTRU_ACTIVATE_ALL to activate the transfer struture
4.If you had not transported certain objects from QA to prod. You will need to retransport them.
have a look at 4 possible scenarios and check the strategy at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
Check these notes: 140276 and 325470
to know the other possible notes for this,have a look at:
/message/3030702#3030702 [original link is broken]
Reg,
Dhanya

Initilization Issue post system refresh

Hello Everyone we are encountering below mentioned ST22 dump when we try to open any IP related and try to delete/re init, can you please suggest applicaple fix?
Thanks
Abhishek Shanbhogue

Thanks Raman for your response, I have tried replication and activation yet no luck
I am able to open full IPs but when I try to go to delete init requests then it throws this dump
Thanks
Abhishek Shanbhogue

System refresh -- Export content of secure store ?

Hello,
We often perform system refreshes. To run this process smoothly we use database copy (copy over the datafiles files then recover the db).
We export several tables from the refreshed system before the DB copy. After the refresh we reimport them, this makes the sap level post processing lighter.
I would like to export the content of the secure store (tx secstore) then re impot it also. Has anyone already performed this ?
Thanks & krs,
aidan

Hi,
The data stored in the secure storage are encrypted with a key that includes the installation number and the system ID. If any of these changes, for example due to a system copy or a new license key, the data in the secure storage must be migrated. For information on migrating the secure storage data, see SAP Note 816861.
Please refer specified notes:
If you get a short dump CREATE_OBJECT_CLASS_NOT_FOUND then see SAP note 1053954.
If any "System dependant data for entryu2026" errors are reported then see note 816861
I hope it will help you.If not please let me know.
Regards,
Kiran .V

Steps for System Refresh for ABAP + JAVA stack

Hi friends,
I am newbie to SAP BASIS adminstration. There is a system refresh activity planned shortly.
Can someome pls let me know the steps for system refresh of ABAP + JAVA stack??
regards,
Ambarish.

Please check [systemcopy@SDN|System Copy and Migration] and [guides|http://service.sap.com/instguidesnw] according to your release.

SDCCN settings after system refresh

Hi,
I am planning to refresh my TST system with PRD.
For post system refresh activates, what I have to do for SDCCN settings.
So that EWA will generate automatically.
Kindly advice.
Our environment Windows 2003, Oracle 10g2 and Netweaver 7.01
Best Regards
Satya

Hi Satya,
Once you finish the QAS refresh then login to Solution and perrun a "managed system configutation wizard " and make sure to activate EWA.
After you finish the above said wizards sucessfully then schedule EWA under "EarlyWatch Alert Management" (SOlman SP10).
I'm sure this would assistance you to enable EWA in QAS .
Regards
Mani

Post System Refresh Activity - BDLS run

Similar Messages

Maybe you are looking for