Post system refresh, "Request IDoc : IDoc with errors added"

Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

Similar Messages

IDOC Tables with Errors Post System Refresh

Hi Everyone,
Is there any Report or other way through which one can get List of IDOC Tables with Errors Post System Refresh.
Thanks,
Regards,
- Ishan

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

Issues in IDoc Sender Scenario:IDoc with errors added

Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Status 56 - IDOC with errors added

Hi everyone,
 I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 - IDOC with errors added "EDI: Partner Profile not available".
 but i had already created Partner profile in WE20.
Regards,
Varun Reddy.K

Hi Varun,
 The below link will help u in solving u r problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Just try follow the steps followed in above mentioned link
And also check u r RFC connection in TC "SM59".
Reward with ponits if helpful
Regards
Sai Ganesh

Error in Receiver - IDoc with errors added

Hi All,
I am getting error in 56 - IDoc with errors added in receiver System.
I am new in Idoc - please tell me How to resolve this issue..
Thanks in advance..

Hi all thanks for reply .
All are the help full answer ,
I use T-code WE19 and change partner profile and execute now it is fine.
But i have checked all configuration regard partner profile from T-code WE20 it looking everything is fine but in Test tool for Idoc Processing by t-code WE19 i have checked it will taken wrong partner profile detail after giving correct manually now it is working fine.

How can we automate the Post system refresh activities

All,
Just want to know if there is a way to automate most of the post system refresh activities that were done by Basis.
Please note that i am talking about Post System refresh activities.
Appreciate your responses.
Thanks,
Giri

It all depends on what you would like to do: you keep the same SID or is it a rename?
- you could plan 1 jobs on production after event 'Zafterrefresh" with following steps:
that runs a BDLS
that does a cleanup of the spools
cleanup application logs
Trigger the event after the refresh and that starts.
Depending on your system you can run multiple jobs in //
some actions will have to be done manually:
user import
TMS config
etc

Idocs with errors added status-56 in file to idoc scenario- how to rectify

hi ,
in file to idoc scenario when i m sending the file from ftp server to IS Retail, file is successfully getting processed but the idoc is showing error ,when we see using WE05 tcode or BD87 , pl sugggest how to rectify it to make the status 53

Hi,
Have you configured the partner profile details? check these steps..
1. In the receiver system you must configure the partner profile for your sender system in WE20.
2. Add the IDoc message type to inbound parameters of the partner profile and configure the appropriate process code.
2. Fill the Logical system name for your senderservice-->Adapter Specific identifiers in ID.
<a href="/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi File-to-IDOC Scenario</a> By Venugopalarao
<a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> By Ravikumar Allampalam
Regards
San

SAP CRM IDoc with errors added

Hi Experts,
I am facing some issues related to IDoc processing.The errors I am facing while IDoc processing are as follows:
1)E0(332) : EDI: Partner profile not available with IDoc status 56 & Idoc number 53
2)HRMD_ABA with IDoc status 52 & IDoc number 1
                       5-(000) : HR: ALE inbound processing for HR master data (Idoc No1)
3)HRMD_ABA 22 with Idoc number 22
                       B1(005) : & &, &, &.
                             No filters, Fields converted, No version change. (Idoc No 22)
Kindly provide me the solution through which I would be able to rectify the failed Idocs.
Thanks
Warm Regards
Vineet Joshi

Hi Vineet,
Maintain Inbound/Outbound partner profile using tcode WE20.
Thanks,
Balaji P.

File to IDoc scenario - IDoc received with Errors

Hi,
I tried to send send IDoc from a file to SAP R\3. The communication channels are working fine, and I get the IDocs in R\3 but with status 56. When I examine the received IDoc structure in transaction "WE19", I see that the receiver port(SAP + SID of sap server) is blank with no values. I tested the IDoc adding the receiver port, and the IDoc got successfully posted...
I wonder why the receiver port that I specified in payload file content, does not reflect during runtime. I'm using the downloaded MATMAS IDoc structure with sender and receiver details as the input from file....
Please help me out!
Thanks!!
-Ajitha

Rodrigo/Sarvesh/Ravi/Haseeb,
Thanks for the inputs!! I have checked in IDX1 and the port name is the same. Also "Apply control records values from payload" checkbox is selected. I guess there was some problem with cache. It started working fine, when I started a new session
Thanks for your time and inputs!!!

Post System Refresh Activity - BDLS run

Hi,
We have finished system refresh of a QA system from Production. We need to run BDLS now to convert the original Production logical systems to QA relevant logical systems.
I am short of understanding of this process. Can anyone please help me with the concept and process?
Thanks in advance,
Abdul

Hi Abdul Rahim Shaik,
BDLS will convert the logical system name for your PROD to QAS.
For eg:
Your source - PRDCLNT100
Your target - QASCLNT100
If you go to SCC4 in your QAS, u will see Prod logical system name for the client.
Once you run BDLS after system copy, logical system name exist in every table for PRDCLNT 100 will change to QASCLNT100.
Refer to below link for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/33/c823dbaea911d6b29500508b6b8a93/frameset.htm
Cheers,
Nicholas Chang

Post System Refresh Activity

Hi All,
I did system refresh ( from PRD to QAS , platform Windows 2008 R2 and MSsql) the system was up and running fine. The system was absolutely fine for one day and the day after the DB crashed , not sure what happened, is there a way i can find the logs through which i can come to know what exactly happened. Also post refresh when i was trying to run BDLS , the job was getting cancelled , the job log showed there is another conversion already running , when i checked the tables the conversion had already happened . Please tell me can running BDLS which cancelled many times could be the cause for the DB crash, if yes where can i find the logs for this , if not what else could have happened that the DB crashed . Thanks for your responses in advance.
Regards
Mrigank Aditya

Hi Nainesh,
Thanks for the message , yes system is up and running fine , the DB team did a restore of Production data on Quality again , and i did the post refresh activities again , the issue what had happened last time was we were doing simultaneous refresh of two systems at a time , BI prod to BI qas and ECC prd to ECC qas , we had found a list of tables in BDLS which gets updated when we run BDLS and we run those tables only , unfortunately the files got exchanged , the ECC tables should have run on ECC machine and BI tables should have run on BI machine which didn't happen and it happened the other way round BI tables where run on ECC machine , due to which BDLS failed and the job got cancelled many times, which impacted the whole system conversion and logical update , which crashed the DB( i exactly don't know the reason what happened internally , still searching for it ) . At present the machine is up and running fine.
Regards
Mrigank Aditya

Post System Refresh

Hi Guru's,
I needed to know what are important BI steps to go through (for system check up) after the system refresh.
In this case, the testing box has been refreshed from the production.
Thanks, Akash

hello,
After the refresh, the connection with the source system gets lost.You need to:
1.restore source system connection
2.activate and replicate datasources
3.Run program RS_TRANSTRU_ACTIVATE_ALL to activate the transfer struture
4.If you had not transported certain objects from QA to prod. You will need to retransport them.
have a look at 4 possible scenarios and check the strategy at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
Check these notes: 140276 and 325470
to know the other possible notes for this,have a look at:
/message/3030702#3030702 [original link is broken]
Reg,
Dhanya

Actual Cost Process request run terminated with Error Signal 11

Hi All
Could not run Actual Cost Process as it is terminated with error signal 11. Please tell me the reason/cause if any one has come across this error before in your cost running process. Thanks in advance for your valuable suggestions.
I am using PPAC cost method and on Release 11. I search in metalink and Apply Patch 5208603, 5475347 but But failed
Pls Help me???

Hi,
Were you able to relink the executable file via adadmin successfully?
Please see if these documents help.
Note: 402805.1 - Actual Cost Process Fails With Error Message 'Signal 11'
Note: 402829.1 - GMCACOST Actual Cost Process Completes In Signal 11 Error After Applying Patch 5386789
Note: 375764.1 - Actual Cost Process terminated with Signal 11
Note: 389970.1 - Actual Cost Process erroring out with Signal 11
Note: 338230.1 - Actual Cost Process Failing With Signal 11 Error while processing inventory transfers
Regards,
Hussein

IDOC created with errors!

Hello All,
I am sure that I am not posting this in the right forum. But I did this because, I get more responses in this compared to others. Sorry if this has caused any trouble.
I had extended a standard idoc with 2 customer segments and procesed the idoc file. An idoc got created witht he following error message.
EDI: Syntax error in IDoc (mandatory segment missing)
Message no. E0072
Diagnosis
The segment E1EDK14 has the attribute 'Mandatory' in the syntax description of the basic type /IRM/CHGBACKS01 (customer enhancement ). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
Procedure
Please check the IDoc or the syntax description of the basic type /IRM/CHGBACKS01 (customer enhancement ).
When we insert new segments, where should we insert? How important is the segment number? Why is this error message even though that mandatory segment is there in the idoc?
Please help.
Thanks,
Lavanya

Hi,
I got the following error message.
Basic type ZCHGBCK does not exist
Message no. EA447
Diagnosis
IDoc type ZCHGBCK could not be found.
Procedure
Please enter an IDoc type that exists.
Srinivasan,
I had tested this with the standard idoc and it was perfect. i am having these issues after extension only.
Thanks,
Edited by: Lavanya Boora on Jun 2, 2008 10:55 PM

How can i find the IDoc's with errors

Hi gurus,
How to find the errors in Idocs and How to solve it?How can i rectify the errors?
Thanks in advance.
kumar.

Hi Kumar,
You can goto WE02 T'code and give the IDOC number (check date range). Click on Status Records. It shows the exact error.
If IDOC fails it is gives your the status 51 otherwise it gives you the status 53.
Assign points if useful
~Rajesh

Post system refresh, "Request IDoc : IDoc with errors added"

Similar Messages

Maybe you are looking for