Post to GL but no impact to sales net value

Dear SD Gurus,
I have a condition type which calculates the value from net value (says, 10% from gross value, for instance) that needs to post to GL (not statistical) and it will not impact the total sales net value.
Any idea how to set it up?
Thanks,
Soo

Hi
check the settings once again plz
Goto Basic function-Account determinationRevenue account determination-Define and assign account keys-select assign account keys-here u hv to select right pricing procedure-condition type----Account keys....
Hope it ll work properly.
Regards
JAGA

Similar Messages

  • Free sample sales net value in invoice should give zero value.

    Hello Experts,
    I have a question on the cess values aspect of free sample sales.Recently, I have configured a free sample sales for one of our clients. Now, in the invoice the user does not want the cess values to be passed to the customer.I changed the R100 discount type in the pricing control data, still tax is picked up, showing negative net value and not zero. Now, how to arrive at excise payable as credit entry and octoroi etc as debit entry in G/L accounts. or where I am going wrong, please suggest.
    Regards,
    Raj.

    For sample sales that is you are despatching material on free of cost, follow the steps mentioned below
    1) In V/06, you should create a condition type, say ZDIS (for 100% discount) and maintain the following:-
    Cond. class::::::A
    Calculat.type::::A
    Plus/minus:::::::X
    Item condition:::X
    Amount/percent:::X
    Delete:::::::::::X
    Value::::::::::::X
    Save the condition type
    2)  In OV34, create two new Account Keys, one for PR00 and one for 100% discount.  Say the two Account Keys are ZSM and ZSP
    3)  In V/08, against PR00 condition type, assign Account Key ZSM with a tick in "Required".  Next for condition type ZDIS, assign the another Account Key ZSP without any tick in the three boxes.  Against this discount condition type, assign the step number of net value under the tab "From", assuming that after PR00 you have multiple condition types.
    4)  In FS00, create a new G/L Account with description as Sales Promotion Expenses
    5) In VKOA maintain these two Account Keys for the sales organisation / chart of accounts with the same G/L account for both the Account Keys.  Dont assign different G/L Account here.
    6)  Now create a sale order and do billing.  See how the accounting document flows.  Post still if you have any issues.
    thanks
    G. Lakshmipathi

  • Invoice correction (RK) change sales net value

    Hi Experts,
    I wanted to create an invoice correction process, after i was entering with reference to the billing document number i have seen 2 item category there were G2N and L2N.
    material              qty                cat            value
    1234                    2                 G2N           18.40
    1234                    2                 L2N            18.40-
    1) System will auto create with 2 item category, is it true?
    2) How can i change the net value? Because the actual value suppose is 17.00
    Thanks & Regards,
    Yong Kok Wah

    Hi
    Invoice correction Request is a combination of Credit memo Request and Debit memo Request, which has got Item category G2N and L2N respectively. They have opposite signs to one another.
    That means, each item is duplicated as Credit posting and Debit posting with opposite signs as you can see in the Overview screen.
    Therefore, initially the Net value is "Zero", as there is no difference.
    Now, you can make the correction / changes via the "Debit memo" items only. You can not make any changes through the Credit memo items (they are disabled area).
    If, you want to change the quantity, you can do it in the Overview screen itself.
    If, you want to change the Price, then select the item > go to item details > select "Condition" tab and make the chages here > come back to the overview screen.
    Now, click on the "Delete unchanged pair" button in the application tool bar.
    System will delete the unchanged pairs and only the changed pairs will remain.
    The resulting difference (of Credit item and Debit item)  will  be automatically reflected in the "Net value" field for which you have to issue a Credit memo to the customer.

  • Sales report to get grand net value

    Is there a standard report where I can get the grand total of all the sales net values on the system? I am using VA05 and VA03 but I want to enter a range.

    Standard SAP SD Reports:=
    Statistic Group:
    Purpose – To capture data for Standard Reports, we require to activate Statistic Group as under:
    --> Item category (Configuration)
    --> Sales document type (Configuration)
    --> Customer (Maintain in Master data)
    --> Material (Maintain in Master data)
    When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
    Configuration:
    IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
    1. Maintain Statistics Groups for Customers
    2. Maintain Statistics Groups for Material
    3. Maintain Statistics Groups for Sales Documents
    4. Assign Statistics Groups for Each Sales Document Type
    5. Assign Statistics Groups for each Sales Document Item Type .....
    All Standard Reports which are available are as under:
    SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
    1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
    2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
    3. Sales organization -> Sales organization / Sales office / Sales employee
    4. Shipping point -> Deliveries / Returns
    5. SD documents -> Orders / Deliveries / Billing documents ...
    & so on.
    Some of the Standard reports in SD are:
    Sales summary - VC/2
    Display Customer Hierarchy - VDH2
    Display Condition record report - V/I6
    Pricing Report - V/LD
    Create Net Price List - V_NL
    List customer material info - VD59
    List of sales order - VA05
    List of Billing documents - VF05
    Inquiries list - VA15
    Quotation List - VA25
    Incomplete Sales orders - V.02
    Backorders - V.15
    Outbound Delivery Monitor - VL06o
    Incomplete delivery - V_UC
    Customer Returns-Analysis - MC+A
    Customer Analysis- Sales - MC+E
    Customer Analysis- Cr. Memo - MC+I
    Deliveries-Due list - VL04
    Billing due list - VF04
    Incomplete Billing documents - MCV9
    Customer Analysis-Basic List - MCTA
    Material Analysis(SIS) - MCTC
    Sales org analysis - MCTE
    Sales org analysis-Invoiced sales - MC+2
    Material Analysis-Incoming orders - MC(E
    General- List of Outbound deliveries - VL06f
    Material Returns-Analysis - MC+M
    Material Analysis- Invoiced Sales - MC+Q
    Variant configuration Analysis - MC(B
    Sales org analysis-Incoming orders - MC(I
    Sales org analysis-Returns - MC+Y
    Sales office Analysis- Invoiced Sales - MC-E
    Sales office Analysis- Returns - MC-A
    Shipping point Analysis - MC(U
    Shipping point Analysis-Returns - MC-O
    Blocked orders - V.14
    Order Within time period - SD01
    Duplicate Sales orders in period - SDD1
    Display Delivery Changes - VL22
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Net amount and taxes are not reflected in net value and taxes tab in sale

    hi
    While i am generating sale order that time system calculated all condition like price E.D cess E-cess Lst  but it is not reflected in net value and tax tab.The value comes in net is quantity value.
    Pl Give me Solution on that...
    Thanks & Regards
    sachin

    in header item level when i am putting my condition that time system calculate each and every condition but not reflected in tab net value tab. Insist of net value only quantity is coming in that tab......
    Thanks
    sachin

  • Net Value of the Sales Order in Document Currency is Zero

    Hi,
    I have an issue with Sales order where in "Net Value of the Sales Order in Document Currency" field value in the initial screen is getting displayed as Zero. But in Pricing Conditions tab "Net Value in Document Currency" is showing correct value.
    Could someone advice what causes this situation and how to fix it.
    Thanks.
    Best regards,
    srikrishhna13

    Hi Navaneeth,
    Need your help and advice again. My later investigations reveals the below.
    In some Orders (with a different item category) the Net value is getting reflected at Header level, irrespective of whether the line item/items are under some RfR.
    My earlier case were with Orders (item category different from above) the Net Value is Zero when all the line items are under some RfR.
    Kindly help me how to fix this issue.
    Thanks.
    Best regards,
    Srikrishhna

  • Sales Condition, but not totalling to net value in SO

    Hello,
    We have costs which we need to post to certain GL accounts, to do this I created new condition type (not have statistical ticked in procedure). This is for royalty process, whereby every SO which we sell to every customers, we will pay 3% of sales to another party.
    - Problem, if dont tick statistical, wrong values get posted to customer because we're adding 3% to credit customer.
    - If tick statistical, values dont get transfered to accounting.
    Is there any better way we can use to not allow values to be totalled into net value in SO, but still be able to bill and post to accounting?

    You can achieve this requirement by creating New Condition Type ( suppose XYZ ) with Calculation Type as Percentage & Plus/minus as -ve . Add this Condition Type below the Condition Type for Royalty Process (suppose ABC ) with Step Number as the one of  Condition Type ABC in From Column in the Pricing Procedure.
    You would have to mention the Account key for Condition Type ABC & maintain 100 % Condition Record for Condition type XYZ & no Account key should be assigned against Condition Type XYZ.
    Best Regards,
    Ankur

  • FG production on sales order but RM procurement on Sales Contract.

    Dear Gurus
    Here is the client requirement for Planning and Procurements of FGS and Rms.( Process Industry)
    1) Client wants to make sales Contract VA41 for FG in which they will create schedule line for item with delivery date in Month format with Quantity.
    From VA41 sales contract creation , they want their RMS to be Procured but NO MRP should be run or impacted for Final Assembly. In short NO MRP for FG
    2) After VA41,  they again want to run VA41 in which they will create ''With reference and in contract tab, they will make Customer PO with reference to above Contract. This number will give them a Qty Variance between customer's purchase order and the sales documents created.
    3) Again with Reference of Customer PO, they will make a Sales order from VA41 and this sales order they will Produce their FG.
    So FG Production is Sales order driven but RM procurement is Sales Contract driven.
    1) Which Planning strategy i should assign to RM and FG?
    2) What will be step by step configuration guide from PP and SD side.?
    Appreciate your reply
    Thanks
    Shailesh

    In SPRO
    goto SD>Schedule line>Define schedule line categories
    here check if the schedule line category associated with your mentioned order has a flag ticked for Availability.
    Availability check for sales
    You must carry out an availability check for the following transaction.
    The indicator is determined as a proposal in conjunction with the respective requirements type. It can be changed in individual shipping transactions. However, only one restriction is effective.
    Example
    You do not set an indicator for maintaining the requirements type. In this case, no availability check is carried out. This is independent of the selection in the respective transaction.
    You set an indicator for maintaining the requirements type. In this case you can decide whether or not you require an availability check for the relevant transaction.
    reward points if it helps
    regards
    Biju

  • I'm not sure if I am writing this in the correct area (this is my second attempt at posting a question), but I have a comment about a recent store experience in Sandusky, OH.  I am not a current Verizon customer, but I was visiting friends and we had to g

    I'm not sure if I am writing this in the correct area (this is my second attempt at posting a question), but I have a comment about a recent store experience in Sandusky, OH.  I am not a current Verizon customer, but I was visiting friends and we had to go to the store to get something taken care of.  First off, allow me to compliment the nice, new store.  Boy, its changed over the past few years ago when I was in last. My comment is mostly directed to one specific employee.  When we entered the store, we were "welcomed" by a sloppy dressed gentlemen (his clothes were probably two sizes two small), which really struck me as unusual because every other employee in the store was dressed really "casual" with nice sporty clothing and red shoes.  Either way, after being entered into the computer, the gentlemen told me to wander around or have a seat in the back and someone would be with us soon.  As soon as we walked away from the door, the gentlemen handed his "duty" off to another employee who took over welcoming people coming in.  For whatever reason, I felt glued to him as he stood out to me.  After leaving the door, he immediately went to the back of the room, hunched over a cabinet, where he stood for the next 30+ minutes playing on his phone, frowning and not speaking to anyone around him.  Again, I found this unusual because everyone else was overly friendly and smiling.  I finally decided to walk by and see what he was doing.  It appeared that he was texting someone.  He paid no attention to me whatsoever as I walked by, just continued to frown and text on his phone.  I did take not of his name tag for future reference.  His name was Justin.  I am assuming he's the manager of the location as he was just standing around while everyone else worked.  I do understand that managers aren't necessarily doing the "dirty work" of the employees, but he could have at least found some better fitting clothing (I find it hard to believe Verizon doesn't supply it), been a little friendly, pretended to be busy, and not been texting the entire time we were there.  Again, the store was great, the other employees were very helpful, but the manager seemed to be doing is own little thing and it didn't put off a good image for the rest of the store.  Just wanted to share my comments.

    lisab101,
    We appreciate you reaching out to us. We greatly appreciate the feedback that you have provided us. Please know that we will lift this up to management and the issues will be addressed.
    Thank you,
    RobinD_VZW
    Follow us on twitter @VZWSupport

  • Using a "Posting Key" relevant for the calculation of sales

    Hi All,
    if I make a posting by F-02 using a "Posting Key" relevant for the calculation of sales, I wonder: in which table SAP registers the data of sales?
    Is there the way to modify the relevance for sales of that posting?
    Thanks

    Hi
    As far I know, sales figures are getting updated in the following summary tables:
    KCN1 for Customer related.
    LFC1 For Vendor realted.
    Regards

  • I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do?

    I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.

    Help for forgotten passcode >   iOS: Forgotten passcode or device disabled after entering wrong passcode
    When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
    Try a search >  iOS: Understanding Spotlight Search

  • When Im On Facebook, In Frontierville, I Can Post One Thing But Then When I Try To Post A Second Thing , Firefox Crashes. Its Been Happening For 2 Weeks Now Its Quite Annoying

    I Can Post One Thing But It Crashes When I TRY To Post A Second Thin.

    @sanjampet: I have already read the link you provided and none of the solutions work, which is why I posted here.
    Safe mode just doesn't activate. I hold shift for as long as possible until eventually I get the prohibited symbol. When I hold shift I see the apple logo and loading icon and then eventually prohibited symbol, its as if I wasn't holding shift at all, which makes me wonder if the shortcut is even correct? And I know its not a problem with my keyboard or my timing of pushing shift because holding alt/option works as usual.
    Holding C to load from the installs disc doesn't work either, which eliminates all the solutions based on that. Its the same as safe mode - I hold the button until I eventually get prohibited symbol.
    I also tried selecting my Mac hd via holding alt key - same result: prohibited symbol.
    I also tried selecting my installs disc via holding alt key and a strange thing happens: I see the apple logo and loading wheel but this time it is stuck on the apple logo and loading spin thing for about 20 minutes while there is lots of noise and activity coming from the CD drive..
    I also tried resetting the NVRAM/PRAM, which DID seem to have an affect (screen was brighter + startup sound was louder) but I still see the prohibited symbol like all the other times.
    I'm yet to be able to get past the prohibited symbol, the only way around it so far is to load the windows partition if my HD.

  • Credit management –impact in sales order if the order quantity is above customer credit limit..

    Hi Team,
    Can anyone help us to solve the issue in credit control process..our requirement is stock reservation should happen in sales order even if the sales order value is above the limit in customer master..
    Please share the configuration ..
    We tried many things but not working properly..
    Thanks,

    Hi Shiv,
    thanks for the help
    in this note , the point number 9  mentions that the result of rescheduling and manual stock reservation will be different if there is credit check in sales order.
    is there any way to solve it? it is because our product list is so high..i run V_V2 for 1000 items for 800 items reservation happened propelry and for 200 V_V2 didnt confirm for some orders for the same do we need to run manual ATP??
    Thanks to help us

  • Clock in tool bar stuck, somebody in another post suggest bettertouchtool, but don't know what that is and can't get to magnifying glass next to clock, get the error-beachball. I'm a novice w/ Mac. Thx.

    Hi - clock in tool bar stuck, somebody in another post suggest bettertouchtool, but don't know what that is and can't get to magnifying glass next to clock, get the error-beachball. I'm a novice w/ Mac. Thx.

    HI ..
    Open a Finder window.
    Select your user account on the left in the Sidebar. It has a small house icon.
    Now open the Library folder then the Preferences folder.
    Move the com.apple.systemuiserver.plist file from the Preferences folder to the Trash.
    Restart your Mac.
    edited by:  cs

  • Create return but linked to original sales order where the material was delivered in the first instance

    Hi Everyone
    I want to create return but linked to original sales order where the material was delivered in the first instance, I don’t want to create other sales order (to return) with references to the original, and then other sales order to be delivered again (replacement).
    Example
    SALES
    1. Create a sales order number 33 with 10 Ton
    2. The delivery is linked to sales order 33 just with 8 Ton
    3. Invoice is created linked to the delivery with 8 Ton
    4. Sales order number 10 pending qty is 2 Ton
    RETURN
    5. We would like to link the return delivery to the sales order, 5 Tons will be retuned
    6. Credit memo is created
    7. Sales order number 10 pending qty update to 7 Ton

    The only way is to change the item categories in the delivery.
    Create the delivery wrt the original sales order.
    Change the item category(In the config make sure the return is checked)- But I think you need to do some changes in the user exit to enable the item category in the delivery)..
    The other option is to have a return order document(type RE) and then create the return delivery for this document. In the copy controls you can maintain the return item categories while creating the return order from sales order..
    Thanks

Maybe you are looking for