Post upgrade executing repqir infoobject in RSD1
I was trying to check the consistency of the infoobjects by executing the repait infoobject in RSD1 in the upgraded system it says the following error for a couple of the info objects "Database table /BI0/MABCPROCESS could not be deleted".
How can we overcome this.
Thank u
I was trying to check the consistency of the infoobjects by executing the repait infoobject in RSD1 in the upgraded system it says the following error for a couple of the info objects "Database table /BI0/MABCPROCESS could not be deleted".
How can we overcome this.
Thank u
Similar Messages
-
ASU-process POST Upgrade Step on SQL database
Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List Severity SAP R/3 release frm SAP R/3 release to
IS-OIL Application Test 600 Optional
KP06xx: Termination SYNTAX_ERROR Obligatory 470 500
CGPL: Entries are blank after upgrade Obligatory
Error handling of task group execution Optional
Mobile device cannot confirm TO after release upgrade Obligatory 470 600
Mobile device doesn't find transfer orders after upgrade Obligatory 470 600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Convert customizing for warehouse funds ctr scenarios Optional
Various problems classification commitment items (class type Obligatory
Unauthorized error messages udring fiscal year change/reassi Obligatory
RFFMUDX1 migrates incomplete budgeting tables Obligatory
Non-7bit-ASCII character used for BCS key figures Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Migration to ERP 6.0 (EA-PS 6.00) Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00) Obligatory
Missing initialization of new fields in table ANLZ Obligatory 46C 470
Activating VMC for the Internet Pricing and Configurator Obligatory
Customer specific BSEG-fields not transferred Optional
Conversion of report headers in drilldown-reporting Optional 600
IBase: Upgrade to Release 4.6C and higher Optional 46C 600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher Optional 46C 470
Conversion of CO-Total-Tables Obligatory 46C 500
Conversion of CO-line-item table COEP Obligatory 46C 600
New General Ledger, problems in CO-documents Obligatory 500
No receivers found in allocations Obligatory 46C 470
Conversion Of New Process Parameter Long Texts For Search Optional 110 600
Migration of process parameters in recipe management Optional 110 600
FAQ new depreciation calculation Optional 600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT Obligatory 100 500
Reloading Table T512W Optional
Converting Short Texts Obligatory
Migrating Data Optional 4.7
Activating SAP ECC Extensions Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
VinayHi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade. SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit -
Upgrade step ASU-process post upgrade step
Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List Severity SAP R/3 release frm SAP R/3 release to
IS-OIL Application Test 600 Optional
KP06xx: Termination SYNTAX_ERROR Obligatory 470 500
CGPL: Entries are blank after upgrade Obligatory
Error handling of task group execution Optional
Mobile device cannot confirm TO after release upgrade Obligatory 470 600
Mobile device doesn't find transfer orders after upgrade Obligatory 470 600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Convert customizing for warehouse funds ctr scenarios Optional
Various problems classification commitment items (class type Obligatory
Unauthorized error messages udring fiscal year change/reassi Obligatory
RFFMUDX1 migrates incomplete budgeting tables Obligatory
Non-7bit-ASCII character used for BCS key figures Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Migration to ERP 6.0 (EA-PS 6.00) Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00) Obligatory
Missing initialization of new fields in table ANLZ Obligatory 46C 470
Activating VMC for the Internet Pricing and Configurator Obligatory
Customer specific BSEG-fields not transferred Optional
Conversion of report headers in drilldown-reporting Optional 600
IBase: Upgrade to Release 4.6C and higher Optional 46C 600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher Optional 46C 470
Conversion of CO-Total-Tables Obligatory 46C 500
Conversion of CO-line-item table COEP Obligatory 46C 600
New General Ledger, problems in CO-documents Obligatory 500
No receivers found in allocations Obligatory 46C 470
Conversion Of New Process Parameter Long Texts For Search Optional 110 600
Migration of process parameters in recipe management Optional 110 600
FAQ new depreciation calculation Optional 600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT Obligatory 100 500
Reloading Table T512W Optional
Converting Short Texts Obligatory
Migrating Data Optional 4.7
Activating SAP ECC Extensions Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
Vinay
Edited by: Vinay Paul on Sep 11, 2009 10:11 PMHi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade. SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit -
Upgrading Oracle Text - Post upgrade step 10.2 to 11.2
I already upgraded my 10.2.0.4 database to 11.2.0.1 and have to do post upgrade steps. In step 39 of Manual guideline (837570.1) is not clear for me. If some one can explain further would be appriciated. When i check my source ORACLE_HOME/ctx/admin/ctxf102.txt or ctxf102.sql
Step 39
Upgrading Oracle Text
Copy the following files from the previous Oracle home to the new Oracle home:
* Stemming user-dictionary files
* User-modified KOREAN_MORPH_LEXER dictionary files
* USER_FILTER executables
To obtain a list of the above files, use:
$ORACLE_HOME/ctx/admin/ctxf<version>.txt
$ORACLE_HOME/ctx/admin/ctxf<version>.sql
where version is 920,101,102
For instance, if upgrading from 10.2.0
*1. For dictionary files check*
*$ORACLE_HOME/ctx/admin/ctxf102.txt*
*2. Execute the script as database user SYS,SYSTEM, or CTXSYS*
*$ORACLE_HOME/ctx/admin/ctxf102.sql*
If your Oracle Text index uses KOREAN_LEXER which was deprecated in Oracle 9i and desupported in Oracle 10g Release 2, see below Note for further information on manual migration from KOREAN_LEXER to KOREAN_MORPH_LEXER.
Note 300172.1 Obsolescence of KOREAN_LEXER Lexer TypeHi Srini
Thank you very much. now i got it.
Oracle asked me to identify the CTXCAT indexes with KOREAN_LEXER execute the following query as user CTXSYS: if nothing return then i can skip this step.
SELECT idx_name
FROM ctxsys.ctx_indexes
WHERE idx_type = 'CTXCAT'
AND idx_name IN
(SELECT ixo_index_name
FROM ctxsys.ctx_index_objects
WHERE ixo_class = 'LEXER'
AND ixo_object = 'KOREAN_MORPH_LEXER ');
SELECT isl_index_owner,isl_index_name,isl_language
FROM CTXSYS.ctx_index_sub_lexers
WHERE isl_object = 'KOREAN_MORPH_LEXER'; -
Solve oracle multimedia post upgrade errors
Hello,
I performed and out of place upgrade from oracle 10.2.0.4 to 11.2.0.4.
when I run the postupgrade script i have issues on oracle multimedia that i cannot solve.. it is about shared memory. I followed all the recommendations suggested on the pre-upgrade script.
SQL> @/oracle/product/11.2.0.4/dbhome_1/rdbms/admin/utlu112s.sql
Oracle Database 11.2 Post-Upgrade Status Tool 10-03-2014 15:06:57
Component Current Version Elapsed Time
Name Status Number HH:MM:SS
Oracle Server
. VALID 11.2.0.4.0 00:14:07
JServer JAVA Virtual Machine
. VALID 11.2.0.4.0 00:11:08
Oracle Workspace Manager
. VALID 11.2.0.4.0 00:00:48
Oracle Enterprise Manager
. VALID 11.2.0.4.0 00:09:58
Oracle XDK
. VALID 11.2.0.4.0 00:02:48
Oracle Text
. VALID 11.2.0.4.0 00:00:59
Oracle XML Database
. VALID 11.2.0.4.0 00:05:45
Oracle Database Java Packages
. VALID 11.2.0.4.0 00:00:20
Oracle Multimedia
. ORA-00604: error occurred at recursive SQL level 1 ORA-04031: unable to
allocate 32 bytes of shared memory ("shared pool","select col#, grantee#,
privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at
"SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. ORA-04031: unable to allocate 32 bytes of shared memory ("shared
pool","select col#, grantee#,
privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at
"SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. col#, grantee#, privi...","KGLH0^34b96f2","kglHeapInitialize:temp")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. ORA-06512: at "SYS.DBMS_JAVA", line 655 ORA-06512: at line 1
. ORA-06512: at line 1
. ORA-00604: error occurred at recursive SQL level 1 ORA-04031: unable to
allocate 136 bytes of shared memory ("shared pool","select
i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds: qksmmGetWorkArea")
ORA-06512:
at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. ORA-04031: unable to allocate 136 bytes of shared memory ("shared
pool","select i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds:
qksmmGetWorkArea")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. i.obj#,i.ts#,i.file#,...","KGLH0^4006e26c","wds: qksmmGetWorkArea")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
. ORA-06512: at "SYS.DBMS_JAVA", line 655 ORA-06512: at line 1
. ORA-06512: at line 1
. ORA-04045: errors during recompilation/revalidation of
ORDSYS./f87ac59f_DicomEngine
ORA-04031: unable to allocate 32 bytes of shared
memory ("shared pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
. ORDSYS./f87ac59f_DicomEngine ORA-04031: unable to allocate 32 bytes of
shared memory ("shared pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
. ORA-04031: unable to allocate 32 bytes of shared memory ("shared
pool","ALTER JAVA CLASS
"ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
. JAVA CLASS "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 276 ORA-06512: at line 1
. ORA-06512: at line 1
. ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 14805
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 14805
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 14805
. ORA-06512: at line 14805
. ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 67
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 67
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 67
. INVALID 11.2.0.4.0 00:55:05
Spatial
. OPTION OFF 10.2.0.4.0 00:00:00
Oracle Expression Filter
. VALID 11.2.0.4.0 00:00:16
Oracle Rules Manager
. VALID 11.2.0.4.0 00:00:14
Final Actions
. 00:01:34
Total Upgrade Time: 01:43:11
PL/SQL procedure successfully completed.
thank you
Mario.I explicity set up the sga_target to 668MB as suggested by the pre-upgrade script.
see the output of preugrade tool:
SQL> @/oracle/utlu112i.sql
Oracle Database 11.2 Pre-Upgrade Information Tool 10-02-2014 17:24:25
Script Version: 11.2.0.4.0 Build: 001
Database:
--> name: FUELPLUS
--> version: 10.2.0.4.0
--> compatible: 10.2.0.3.0
--> blocksize: 8192
--> platform: Solaris Operating System (x86-64)
--> timezone file: V4
Tablespaces: [make adjustments in the current environment]
--> SYSTEM tablespace is adequate for the upgrade.
.... minimum required size: 1071 MB
--> UNDOTBS1 tablespace is adequate for the upgrade.
.... minimum required size: 400 MB
--> SYSAUX tablespace is adequate for the upgrade.
.... minimum required size: 804 MB
--> TEMP tablespace is adequate for the upgrade.
.... minimum required size: 60 MB
Flashback: OFF
Update Parameters: [Update Oracle Database 11.2 init.ora or spfile]
Note: Pre-upgrade tool was run on a lower version 64-bit database.
--> If Target Oracle is 32-Bit, refer here for Update Parameters:
WARNING: --> "sga_target" needs to be increased to at least 484 MB
--> If Target Oracle is 64-Bit, refer here for Update Parameters:
WARNING: --> "sga_target" needs to be increased to at least 668 MB
Renamed Parameters: [Update Oracle Database 11.2 init.ora or spfile]
-- No renamed parameters found. No changes are required.
Obsolete/Deprecated Parameters: [Update Oracle Database 11.2 init.ora or spfile]
--> cursor_space_for_time 11.1 DEPRECATED
--> background_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> user_dump_dest 11.1 DEPRECATED replaced by "diagnostic_dest"
--> cursor_space_for_time 11.2 DEPRECATED
Components: [The following database components will be upgraded or installed]
--> Oracle Catalog Views [upgrade] VALID
--> Oracle Packages and Types [upgrade] VALID
--> JServer JAVA Virtual Machine [upgrade] VALID
--> Oracle XDK for Java [upgrade] VALID
--> Oracle Workspace Manager [upgrade] VALID
--> EM Repository [upgrade] VALID
--> Oracle Text [upgrade] VALID
--> Oracle XML Database [upgrade] VALID
--> Oracle Java Packages [upgrade] VALID
--> Oracle interMedia [upgrade] VALID
--> Spatial [upgrade] VALID
--> Data Mining [upgrade] VALID
--> Expression Filter [upgrade] VALID
--> Rule Manager [upgrade] VALID
Miscellaneous Warnings
WARNING: --> Database is using a timezone file older than version 14.
.... After the release migration, it is recommended that DBMS_DST package
.... be used to upgrade the 10.2.0.4.0 database timezone version
.... to the latest version which comes with the new release.
WARNING: --> Database contains INVALID objects prior to upgrade.
.... The list of invalid SYS/SYSTEM objects was written to
.... registry$sys_inv_objs.
.... The list of non-SYS/SYSTEM objects was written to
.... registry$nonsys_inv_objs.
.... Use utluiobj.sql after the upgrade to identify any new invalid
.... objects due to the upgrade.
.... USER PUBLIC has 1 INVALID objects.
WARNING: --> EM Database Control Repository exists in the database.
.... Direct downgrade of EM Database Control is not supported. Refer to the
.... Upgrade Guide for instructions to save the EM data prior to upgrade.
WARNING: --> Your recycle bin is turned on and currently contains no objects.
.... Because it is REQUIRED that the recycle bin be empty prior to upgrading
.... and your recycle bin is turned on, you may need to execute the command:
PURGE DBA_RECYCLEBIN
.... prior to executing your upgrade to confirm the recycle bin is empty.
WARNING: --> JOB_QUEUE_PROCESS value must be updated
.... Your current setting of "10" is too low.
.... Starting with Oracle Database 11g Release 2 (11.2), setting
.... JOB_QUEUE_PROCESSES to 0 causes both DBMS_SCHEDULER and
.... DBMS_JOB jobs to not run. Previously, setting JOB_QUEUE_PROCESSES
.... to 0 caused DBMS_JOB jobs to not run, but DBMS_SCHEDULER jobs were
.... unaffected and would still run. This parameter must be updated to
.... a value greater than 48 (default value is 1000) prior to upgrade.
.... Not doing so will affect the running of utlrp.sql after the upgrade
Recommendations
Oracle recommends gathering dictionary statistics prior to
upgrading the database.
To gather dictionary statistics execute the following command
while connected as SYSDBA:
EXECUTE dbms_stats.gather_dictionary_stats;
Oracle recommends reviewing any defined events prior to upgrading.
To view existing non-default events execute the following commands
while connected AS SYSDBA:
Events:
SELECT (translate(value,chr(13)||chr(10),' ')) FROM sys.v$parameter2
WHERE UPPER(name) ='EVENT' AND isdefault='FALSE'
Trace Events:
SELECT (translate(value,chr(13)||chr(10),' ')) from sys.v$parameter2
WHERE UPPER(name) = '_TRACE_EVENTS' AND isdefault='FALSE'
Changes will need to be made in the init.ora or spfile.
SQL> SPOOL OFF
here are the last 100 lines of upgrade.log
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 276
ORA-06512: at line 1
. JAVA CLASS "ORDSYS"."/...","KGLH0^1182baa5","kglHeapInitialize:temp")
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945
ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6945 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 276
ORA-06512: at line 1
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 276 ORA-06512: at line 1
. ORA-06512: at line 1
. ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 14805
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 14805
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 14805
. ORA-06512: at line 14805
. ORA-53051: no editDataModel session found ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306
ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN",
line 125
ORA-06512: at line 67
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN_PRV", line 6306 ORA-06512: at
"ORDSYS.ORD_DICOM_ADMIN", line 125
ORA-06512: at line 67
. ORA-06512: at "ORDSYS.ORD_DICOM_ADMIN", line 125 ORA-06512: at line 67
. INVALID 11.2.0.4.0 00:55:05
Spatial
. OPTION OFF 10.2.0.4.0 00:00:00
Oracle Expression Filter
. VALID 11.2.0.4.0 00:00:16
Oracle Rules Manager
. VALID 11.2.0.4.0 00:00:14
Final Actions
. 00:01:34
Total Upgrade Time: 01:43:11
PL/SQL procedure successfully completed.
SQL>
SQL> SET SERVEROUTPUT OFF
SQL> SET VERIFY ON
SQL> commit;
Commit complete.
SQL>
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL>
SQL>
SQL>
SQL> DOC
DOC>#######################################################################
DOC>#######################################################################
DOC>
DOC> The above sql script is the final step of the upgrade. Please
DOC> review any errors in the spool log file. If there are any errors in
DOC> the spool file, consult the Oracle Database Upgrade Guide for
DOC> troubleshooting recommendations.
DOC>
DOC> Next restart for normal operation, and then run utlrp.sql to
DOC> recompile any invalid application objects.
DOC>
DOC> If the source database had an older time zone version prior to
DOC> upgrade, then please run the DBMS_DST package. DBMS_DST will upgrade
DOC> TIMESTAMP WITH TIME ZONE data to use the latest time zone file shipped
DOC> with Oracle.
DOC>
DOC>#######################################################################
DOC>#######################################################################
DOC>#
SQL>
SQL> Rem Set errorlogging off
SQL> SET ERRORLOGGING OFF;
SQL>
SQL> REM END OF CATUPGRD.SQL
SQL>
SQL> REM bug 12337546 - Exit current sqlplus session at end of catupgrd.sql.
SQL> REM This forces user to start a new sqlplus session in order
SQL> REM to connect to the upgraded db.
SQL> exit -
KE30 Post upgrade unicode issue in E-SECAMG-ELI.
Hi experts,
Post upgrade to ECC6.0, While executing a KE30 report "E-SECAMG-ELI" in classic drilldown report mode, everything seams to be fine. but when we see in Graphical report output mode an error "The length of the structure in a non-Unicode 5.129 DATA" is shown. please provide some suggestions on what can be done to rectify this.
Regards,
Sri.Hi Sri,
the numbers of columns you want to display in the drilldown control of the graphical output is restricted to less than 1000
To solve the problem, you could deactivate the drilldown control in the graphical output by changing the selected areas of the graphical output in transaction KE32.
Best regards,
Nils Buerckel -
Infoset query giving error post upgrade
Hi All,
We have upgraded our system from BW 3.5 to BI 7. Post upgrade we are getting error while opening/executing queries on infoset.
In ST22 the error is UNCAUGHT_EXCEPTION -CX_RSD_NAME_ERROR.
The infoset is active.
Thanks for the help.
Regards,
NirajDear Both,
I resolved the problem by applying the solution suggested by Wond.
The SP details are as below,
SAP_BW 700 0015 SAPKW70015 SAP NetWeaver BI 7.0
We were facing this issue in development system. We didn't faced this issue in sandbox which was a copy of production. We are in process of upgrading now quality.
Points assigned to Wond.
Thanks to both for help.
Regards,
Niraj -
Reason for Inactive Infoset Post Upgrade
Hi,
As a part of Upgrade testing, I have observed this in all the systems that Infosets turn Inactive Post Upgrade. And i realise this only when i Execute a Query on an Infoset; it gives me a warning that I need to activate the underlying Infoset.
I am keen on finding the root of this error so that we can take care of these in the systems that have to be upgraded in future.
Any Pointers ?
Regards
ShwetaHi,
it might be necessary to activate all existing InfoSets and MultiProviders based on them after upgrading to NetWeaver 2004s.
Reason:
Infosets are sometimes deactivated because additional checks are available after the upgrade or because new attributes become part of your info-object.
Also,an object can be inactive after upgrade even if the objct contained any custom objects in it. You may have to activate it or run RSRV check.
If there is any change(custom object etc) in InfoSet, it is automatically inactivated and you have to reactivate it.
To activate all such InfoProviders there are programs in SE38 like RSDG_CUBE_ACTIVATE,RSDG_MPRO_ACTIVATE,RSDG_ODSO_ACTIVATE
Hope this explaination helps! -
EJB references post upgrade from 8.1 to 10.3
Hi,
I have an application.xml file in META-INF directory of the EAR file. It has the below reference:
<module>
<ejb>content.jar</ejb>
</module>
<module>
<ejb>content_repo.jar</ejb>
</module>
<module>
<ejb>netuix.jar</ejb>
</module>
<module>
<ejb>p13n_ejb.jar</ejb>
</module>
<module>
<ejb>prefs.jar</ejb>
</module>
<module>
<ejb>wps.jar</ejb>
</module>
Post upgrade I accidentally packaged an EAR without above references in application.xml and without actual jars in the EAR file. The application seemed to be running fine, did not test it completely though. Do we really need these jar files? I had upgraded this application from 8.1 to 10.3 using upgrade tool in workshop. This is a portal based web application. Also, what is the purpose of these libraries? Could these be automatically added by the upgrade tool to the weblogic.xml.Hi Srini,
it supports but you need to upgrade correctly.
follow this link
Beehive Applications
after upgrade if you found some error like classnotfound error.
If those are the errors you were also experiencing, then please follow one of these options to resolve this issue:OPTION
1:Identify all the JARs that contain the beehive classes and explicitly add the jar files to the classpathOPTION
2:When you created the domain (if you used the Config Wizard), do you make it a "Workshop" domain? If not, try that.That should deploy the Workshop framework (Beehive controls, NETUI, etc) libraries as shared libraries. Then these libraries should be referenced in your applications weblogic.xml and weblogic-application.xml.
regards,
Kal -
HI All,
We have recently done the Upgrade from BW 3.1 to BI 7.0
There is a issue regarding the POST Upgrade
One Job is failing every day
The name of the JOB is BI_WRITE_PROT_TO_APPLLOG
And the Job log is
06/18/2008 00:04:55 Job started 00 516 S
06/18/2008 00:04:55 Logon of user PALAPSJ in client 200 failed when starting a step 00 560 A
06/18/2008 00:04:55 Job cancelled
00 518 A
This Job is actually running the program
RSBATCH_WRITE_PROT_TO_APPLLOG
when i try to run this program with my user id its working
but with the other user id which it is schedule its failing giving the messages as mentioned in the job log
Kindly suggest me
REgards
janardhan KMaybe it's a dialog and no system or background user. so the job fails.
Regards,
Juergen -
Post-upgrade tasks for OWB 10g Release 2
Hi,
we're planning to upgrade from OWB 10.1.0.2 to 10.2.x.
Now, I'm trying to get a clear view on what will be the "post-upgrade" tasks, in terms of manual adaptations, corrections, etc. to get everything back up and running after the upgrade ...
E.g. : by means of test al already exported a dimension, and imported it in the 10.2 repository ... Turned out that in the pre-10.2 version, there were no validation problems, but as from 10.2 (although the upgrade and import were successful), I got 19 warnings and 2 errors ... because each level needs to have a business or surrogate key ...
It' s things like that I'm especially interested in, in order to determine the workload after the upgrade ...
So, feel free to share your experiences ; I'm looking forward to read them!
Thanks!
Grtz.Here are some from my list. I stopped maintaining it a while ago, we have lots more where this came from. Some of it also apply to older versions of OWB.
Key lookup You are to choose input and output attributes BEFORE being able to choose loookup table, all in a time consuming wizard
Expressions Copy and paste into expression editor, validation fails for expressions using lowercase (such as "upper" or "substr")
Renaming attributes Not possible anymore, you need to open details
Adding a table component You must browse in a tree structure (time consuming), not search functionality anymore
Import Import converting from 9.2 hangs after 15% in about 10% of all imports
Import Some mappings are not possible to import, a total rewrite is necessary
Deployment You can only deploy about 5-10 times before you need to restart OWB
Memory leak If something goes wrong in OWB, memory is never cleared - JAWAW.exe needs to be removed manually from memory
Import Importing mappings one by one (as this is sometimes needed due to OWB), the last directory used is OF COURSE not default when importing the next time
OWB GUI / mapping editor When working with components in the mapping editor, an object hidden behind the object you are actually working with is selected prior to the object in visual focus to the user
BUG! Urgent: CASE - wrong generated Code
ANSI JOINS Remove ANSI-SQL from mapping configuration, otherwise (+) outer joins will not work
Transformations Not possible to enter a transformation such as "sysdate", you must find it in a huge tree structure list (no search available) -
Upgraded my iTunes to the latest version and upgraded my iPhone 3gs to IOS5. Unable to sync my iPhone with iTunes after upgrade and is getting stuck on Step1. I am running my iTunes on Windows Vista PC and have tried the solution of netsh winsock reset and still no luck.
Also, I am not able to see any of my music on the phone post upgrade, but it shows on iTunes. Again not sure on how to make it appear on my phone. Any help would be much appreciated!!
Cheers,
Kishoremy advice to you is to SWITCH TO SOMETHING BESIDES "VISTA"!!!!!!!!!!!!!
-
Audio Tracks on my iPhone stopped working post upgraded to iOS 5.
Audio Tracks on my iPhone stopped working post upgraded to iOS 5.
Quiet a lot of my tracks do not play on my iPhone 4 after I upgraded to iOS 5. The the seeker bar does not progress and it looks stuck.
Could someone please help.
Regards,
S!dHi !
I am currently having the same problem, since I upgraded my iPhone 4 to iOS 5, many tracks don't work. They were working before. Some are working but half isn't.
Tried to restore, remake playlist, delete every tracks et put them back. Same prob.
Please help !
Regards,
Rom -
12.1.1 POST-upgrade ---verify concurrent process
I have upgraded 11.5.10.to 12.1.1 successfully when I was running post upgrade
Oracle® Applications
Upgrade Guide
Release 11i to 12.1.1
Part No. E14010-01
chapter 4
Step 1: Verify completion of concurrent programs (recommended)
The upgrade process creates numerous concurrent program requests. Once you bring
up the application tier, these programs run automatically to complete tasks such as data
cleanup and upgrades to historical data, among others. You can run these programs in
the background, while your system is up and running and users are active, unless
otherwise instructed in the product-specific sections of this book.
Before you continue, be sure all the concurrent programs generated by the upgrade
have run successfully. In the Required Post Upgrade Jobs section of E-Business Suite
Release 12 Upgrade Sizing and Best Practices (Doc ID: 399362.1), you will find a list of the
distinct concurrent programs included in the upgrade process. The Best Practices
section includes a recommendation on how to isolate these programs (and all their
executions) into a separate concurrent manager queue, which you can use for
processing.
post upgrade concurrent request were around 989 but
by mistake I stopped the concurrent manager and I ran cmclean.sql --:(
then after some time I shut abort the database
please tell me what should I do now
what impact will cmclean and shut abort will have ?
how do i know which request are clean by cmclean
and how can I ran them again??
Immediate reply is appreciated
AppsmastI
SHaring Is CArinGpost upgrade concurrent request were around 989 but
by mistake I stopped the concurrent manager and I ran cmclean.sql --:(
then after some time I shut abort the database
please tell me what should I do now In the Required Post Upgrade Jobs section of E-Business Suite Release 12 Upgrade Sizing and Best Practices (Doc ID: 399362.1), you will find a list of the distinct concurrent programs included in the upgrade process.
what impact will cmclean and shut abort will have ?cmclean.sql script should not have any impact on the concurrent programs, however shutdown abort will do the following http://docs.oracle.com/cd/E11882_01/server.112/e10595/start003.htm#i1006611
how do i know which request are clean by cmclean In the same session you will find the list of table that are updated by cmclean.sql script along with the request ids.
and how can I ran them again??See the doc referenced above.
Thanks,
Hussein -
SLA Pre- upgrade programs and process and SLA Post upgrade
Hi Guys
Can anybody please let me know what are the SLA Pre- upgrade programs and process we have to run and SLA Post upgrade process and programs.
Thanks
AjeeshPl post details of OS and EBS versions. Pl see if MOS Doc 604893.1 (R12: FAQ for the SLA Upgrade: SLA Pre-Upgrade, Post-Upgrade, and Hot Patch) can help
HTH
Srini
Maybe you are looking for
-
Trying to download free apps but cannot remove credit card details to none . Does anyone know how to change it without resetting up new account. Thank you
-
JDev specifying SQLJ translator command line options
Hi, I have come across the problem of SQLJ connections caching up to 5 sql commands and so leaving any related cursors open. This is happening mainly for statments where I have executed a SELECT ... INTO ... Any sqlj with iterators, I have closed the
-
What Ever Happened To Bose Internet Radio App?
I upgraded to the iPhone 5 and was trying to bring my old apps back and was searching for the Bose Internet Radio App: http://worldwide.bose.com/productsupport/en/web/am_fm_app/page.html However it is no longer showing up in iTunes. Did Bose disconti
-
Welcome page should be displayed first no matter which page you run
Hi, we have a project in that few jspx pages are there... no matter which page i run after authentication i should get the welcome page first i tried to put this functionality in task flow by making welcome page as default activity for all taskflows
-
ODQ Delimted loader connection validation issue.
I am new to ODQ . I installed ODI/ODP/ODQ complete setup (Both Client & Server) at my personal laptop and started practicing the ODQ tutorial avaliable on oracle website. I login to metabase manger with madmin , created metabase oracledq , created th