Post upgrade issues from Timezone setting

Everyone,
We just upgraded from 4.5 -> version 6.0 SP1 (so we first upgraded the data to 4.5 WS then to version 6)
After the upgrade, we saw the web service registration to have the send timezone setting to portlet as checked for all the portlets that were upgraded/migrated.
Then after the DB upgrade, we saw some portlets not displaying because of a person's time zone setting. This went a step further and there are users who reported that they can't access the change locale settings page or even add portlets to their page.
A PT spy of the users experience showed this particular error: com.plumtree.portalpages.browsing.portalsettings.localesettings.LocaleSettingsView LocaleSettingsView::Display An error occured when trying to display the HTML.
System.InvalidCastException: Specified cast is not valid.
at com.plumtree.portalpages.browsing.portalsettings.localesettings.LocaleSettingsModel.GetTimeZoneSetting() in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\portalsettings\localesettings\LocaleSettingsModel.cs:line 192
at com.plumtree.portalpages.browsing.portalsettings.localesettings.LocaleSettingsView.Display() in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\portalsettings\localesettings\LocaleSettingsView.cs:line 59
I noticed that the cast error originates from the GetTimeZoneSetting() method. This led me to believe that some values in the DB were unexpected. True enough, I noticed that for the strTimeZone preference some users has a value of 1/-1 and the PrefValueType is set to 3 (instead of 8). After modifying this we resolve the issue and the users could proceed as normal.
My question is that has anyone else experienced a similar issue(or is this just specific to our environment)? Also is there a list of settings/preference you need to check for data integrity after an upgrade? Thanks!

I experienced an issue similar to this once. I don't know if it was exactly the same because it was a 4.5 to 5.x upgrade done a couple years ago, but it sounds like pretty much the same thing. I also tracked it down to a pref problem in the database. I had to manually fix the bad values, but that resolved the problem, and that was the only problem of that type I encountered. That doesn't mean you won't find anything else strange with your upgrade, but it seemed to be a strange isolated incident to me. I have done many upgrades since that time, and never encountered the problem again. I would suspect that if you have fixed all the database records that were affected by this, then you are probably OK.
DJ Dewey | VHA Inc. | [email protected]

Similar Messages

One SO but I would like Post Goods Issue from different Storage Locations?

Dear All,
Pls help me solve this issue below:
I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
- U1 can Post Goods Issue from storage location A only (but cannot from B, C)
- U2 can Post Goods Issue from storage location B only (but cannot from A, C)
- U3 can Post Goods Issue from storage location C only (but cannot from A, B)
How can I assign the Authorization for users?
How can I create Outbound Delivery:
a. 1 SO --> 1 outbound delivery --> Post GI 3 times
b. 1 SO --> 3 outbound delivery --> Post GI
Thank you very much for your support
Cao Huy.

Hi Senthils,
Pls see my comment below:
For Authorization check for storage Location
1. GO to the following Menu path
Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
Here you have activate authorization tick for storage location and plant combination.
--> Done
2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
for each user.
--> Done
There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
How can user 01 Post GI from only location A in this outbound???
And then user 02 will Post GI from only location B in this outbound,
user 03 will Post GI from only location C in this outbound.
Thanks
Cao Huy

Flash builder 4.7 upgrade issue from Flash builder 4.5 (key is not valid)

Hi,
We (Company) are buying Adobe products more than 6-7 years now. We bought the Flash builder premium 4.5 and Flash builder premium 4.5 for PHP volume licence. Now flash builder 4.7 should be complementary upgrade for us. But when we are using Flash builder 4.7 trial version and adding serial number (Flash builder 4.5 serial number), it's just not working and showing a error "key is not valid".
I chat with Adobe customer care 4 different people, they end up saying that let us transfer you to volume licence department and then chat ended. No more chat messages, I checked more than one hour and still no message.
Then I called they, it took 15 mins to connect with customer care. I picked the "upgrade" option from phone menu and then connected with a guy. After listening complete case he forwarded my call to Volume licence executive and the volume licence executive transferred it to some other guy and the other guy redirect it to some specialized person. So total 4 guys. The last guy (specialized) name was Rohit.
This guy Rohit asked me, did I buy a customer support programme (some product about $2.nn.00 )? I said no, we bought volume licenses for Flash builder premium 4.5 ( about $4000.00 ****). He said, sorry sir I can not help you in this, but I can provide you an e-mail address and you can report your concern there. I already passed my 1.5 hour in this conversation. I said okie. He gave me a case number and told me that he will send a email mentioning that email address as per my request I disconnect the phone.
I never get that email address.
Can some one suggest me what to do next. My case number is : 209-788-274.
My email is: [email protected]
Thanks,
Amitabh Arya

I have the same problem, and i have send request complementary upgrade (Adobe® Flash® Builder® 4.7 Complimentary Upgrade), and only received a Acrobat change licensed...
I´m working with 4.7 Beta the last mounths, and now all the days have to see "please enter your license". So one problem that you can jump with money (if you have that money..), isn´t a problem. Like a i have license from flex 3, upgrade to flex 4, and upgrade to flex 4.5, i´m going to take de upgrade from 4 standard to 4.7 standard (47,97 euros), and not waste my time and money on calls. So yes, I'll see adobe with another eyes...
Best regards,
José Ramón León

Trex patch upgrade issue from 44 to 50

Hello
I have successfully installed Trex version 7.00.44.00 on windows 2008 server and Now, when I am trying to upgrade patch from 44 to 50 gives the below error at DNS domain name parameter enter stage.
<<Reverse Lookup of address '64.-88.xxx.xxx failed>>>
I have hosts entries maintained correctly as below.Checked the following note but no success.Host is not registered in the domain but as a workgroup.Can please tell me what could be reason for this???
IPaddress hostname.mycomapny.com hostname
1512315 - "Reverse lookup of address <xxx.xxx.xxx.xxx> failed." error during upgrading TREX
Edited by: Khaiserkm on Jun 4, 2011 7:59 AM
Edited by: Khaiserkm on Jun 4, 2011 8:28 AM

Hi
Does anybody has any idea please let me know.Forward and reverse lookup is working fine.
I suspect whether 2008 supports patch 50 or not.any idea???

SCOM 2012 R2 Post upgrade issues

Hey all,
yesterday we upgraded our SCOM environment from 2012 SP1 to R2. All of the installers ran fine without any issues. After a couple reboots it was back up however we have run into some issues.
Issue 1: The ACS seems to be broken. I can usually run a query on the ACS database manually and get back audit entries. However, now I am getting nothing back at all. Here are the errors that are repeated every few minutes on both
management servers. I did run the ACS upgrade on them both yesterday.
Error occured on database connection:
Status: 0x00040000
ODBC Error: 14
ODBC State: 01000
Message: [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).
Database: Register
Connection: ComplianceTest
Statement: -
Error occured on database connection:
Status: 0x00200001
ODBC Error: 14
ODBC State: 08001
Message: [Microsoft][ODBC SQL Server Driver][DBNETLIB]Invalid connection.
Database: Register
Connection: ComplianceTest
Statement: -
Issue 2: Our UNIX agents are all greyed out now and when I try to upgrade them I get the following error.
EDIT: and here is something else I just found on our other management server
Any info would be great
Thanks
Warm Fuzzies!

I am going to update this post. The service is still crashing nightly. The views dvAll, dvAll5 and dvHeader are not being created. I tried the fix provided by the Microsoft rep and it did nothing. I have uninstalled and reinstalled
the ACS server multiple times and the views are never created. When I start the ACS services I get the same errors.
AdtServer encountered the following problem during startup:
Task: Load Certificate
Failure: Certificate for SSL based authentication could not be found. SSL authentication will be disabled
Error: 0x00000002
Error Message:
The system cannot find the file specified.
Error occured on database connection:
Status: 0x00040000
ODBC Error: 4624
ODBC State: 01000
Message: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot grant, deny, or revoke permissions to sa, dbo, entity owner, information_schema, sys, or yourself.
Database: SqlWriter
Connection: Maintenance
Statement:
I see where the forwarders are connecting. No other errors or messages. The service is set to start up as the Network Services account. The DOMAIN\SERVER$ has a logon and is mapped to the SQL user AdtServer on the OperationsManagerAC database.
We have almost a terabyte of data that we cannot get to after the R2 upgrade.
Very frustrating!!!!
Warm Fuzzies!

Post Upgrade issue

Hello Gurus,
we are upgarding SAP from 4.6c to ECC 6.0.
As a part of post upgarde activities , i am executing SU25 2(B)-(D) steps.
While analysing SU25 2(b) step, i had found that few authorization objects which are checked in 46c version and not found in SU24 proposal in new version.
For example:
for transaction CG02 , in 46c sU24 proposal authorization objects C_SHEP_TPP is check/maintain, whereas in ECC version this authorization object doesnot appear in the SU24 proposal of CG02 transaction.
Also there are few objects which are check maintain in R3 version and Do not check in the new version for the same transaction.
How should i get the same SU24 values in ECC version as in R/3 version ?
This is my first upgrade project, iam very much confused with these inconssitencies, any help is very much appreciated.
Thanks,
Sanketh.

I have found all such type of Conflicting tcodes and sent for client approval.
Meanwhile, iam doing Su25 2(B) for remianing transactions, i had a doubt here the SAP defaults for R/3 are not the same as in the ECC version, Suppose for transaction /SAPSMOSS/QM12
Authorization objects PLOG ,PABAP,P_ORGXX,S_dataset,S_develop are maintained as check in R/3 whereas in ECC the SAP defaults for these objects are Check No.
Whether i should change the proposal to Check Yes in ECC version or maintain the SAP Defaults as it is in ECC version.
Will it affect to be any authorization issue, please clarify.
Thanks,
Sanketh.

CS5 Upgrade Issues from DW8

I have recently upgraded from DW8 to CS5. This occurred when I purchased a new computer with the OS going from XP Pro to Win 7 Ultimate (remained with 32 bit instead of going up to 64 bit). DW8 didn't like the new OS. Now at this stage I am still carrying maintenance out on the DW8 created sites (haven't created any new CS5 ones yet) and I am having trouble with the PVII Menu system which I was forced to upgrade to Version II (to cope with the New Everything) however, more importantly, CS5 will not let me edit the Editable Section of the Template pages as DW8 used to do (as soon as I click on the Editable area, the whole sheet "greys out" and locks me out). I can disengage the Template, however if I do that I can't reattached the page back to the Template. Are you aware of a work around, because if not, it looks as though I am going to have to waste hours re-creating the page as a CS5 page to overcome this issue. Your comments will be appreciated. Hope you might have a solution. With over sixty pages on one site, I am not looking forward too that I can assure you....:-(
Your assistance and advice would be very much welcomed.
Kind regards,
John C

Hi SE,
Looks as though Project Seven made an easy $65.00 from me...:-( I have attached the Code for the index.htm page below which is the page I am having the trouble with;
I have at this point not üpgraded the PVII Menu System on the DWT Template even though I have already installed the Extension into Dreamweaver. I am thinking that I will just ditch the PV V.1 Menu and replace the Menu with PVII on the DWT Template
=========================================
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script language="JavaScript" type="text/javascript">

</script>
<script language="JavaScript" type="text/javascript">

</script><script language="JavaScript" src="mm_menu.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript">

</script><script language="JavaScript" src="mm_menu.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript">

</script><script language="JavaScript" src="mm_menu.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript">

</script><script language="JavaScript" src="mm_menu.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript">

</script><script language="JavaScript" src="mm_menu.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript">

</script><script language="JavaScript" src="mm_menu.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript">

</script>
<script language="JavaScript" src="mm_menu.js" type="text/javascript"></script><html xmlns="http://www.w3.org/1999/xhtml"><head>
<meta name="verify-v1" content="qIaJLnAbdTWNwS2fhEZUTEwFIpZz71CfEjWmHvGkuW8=" />

<title>Mortgage & Equipment Finance</title>

<script type="text/javascript" src="p7pm/p7popmenu.js"></script>
<style type="text/css" media="screen">

</style>

<style type="text/css">

</style>
<meta name="Keywords" content="Mortgages, Mortgage Choice, RAMS, Home Loans, Westpac, ANZ, Aussie Home Loans, Mortgage, Credit Cards, Loans, Equity Loans, Construction Finance, Bridging Loans, Caveat Loans, Lo Doc Loans, Interest rates, Best Rates, Credit Impairment, Bad Credit, Cash Flow Loans, Investment Loans" />

<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /></head><body onload="P7_initPM(0,3,1,-20,10);MM_preloadImages('Products')">
<span class="style1">
<script language="JavaScript1.2" type="text/javascript">mmLoadMenus();</script>
</span>
<table height="90%" border="0" cellpadding="5" cellspacing="0">
<tr bgcolor="#0033FF">
    <td width="180" class="style1"><img src="FHLogo-Blue.jpg" alt="" name="FHLogo" width="126" height="72" border="0" id="FHLogo" /></td>
    <td colspan="2" class="style1"><img src="FH-Heading01.png" name="Heading" width="700" height="92" id="Heading" /></td>
    <td width="144" class="style1"><img src="frame-house.jpg" width="136" height="106" /></td>
</tr>
<tr align="left" valign="top">
    <td width="180" height="455" align="center" class="style1">          <ul id="p7PMnav">
      <li><a href="index.htm">Home</a></li>
      <li><a href="#" class="p7PMtrg">Products</a>
          <ul>
            <li><a href="#" class="p7PMtrg">Mortgages</a>
                <ul>
                  <li><a href="#" class="p7PMtrg">Residential</a>
                      <ul>
                        <li><a href="Mortgage%20Products.html">Owner Occupier</a></li>
                        <li><a href="Under%20Construction%20Page.html">Investment</a></li>
                        <li><a href="equityrelease.html">Equity Release (Reverse)</a></li>
                      </ul>
                  </li>
                  <li><a href="Under%20Construction%20Page.html">Commercial</a></li>
                  <li><a href="Under%20Construction%20Page.html">Industrial</a></li>
                </ul>
            </li>
            <li><a href="FHOG-Stamp%20Duty%20Exemption.html" class="p7PMtrg">First Home Owners Grant</a>
                <ul>
                  <li><a href="FHOG-Stamp%20Duty%20Exemption.html">Stamp Duty Exemption</a></li>
                  <li><a href="FHOG-Funding%20Grant.html">Funding Grant</a></li>
                </ul>
            </li>
            <li><a href="EquipmentFinanceDescription-2.html">Equipment Finance</a></li>
            <li><a href="EquipmentFinanceDescription-2.html">Car Loans</a></li>
            <li><a href="#" class="p7PMtrg">Personal Loans</a>
                <ul>
                  <li><a href="Under%20Construction%20Page.html">Deposit Loans</a></li>
                  <li><a href="Under%20Construction%20Page.html">Personal Loans</a></li>
                </ul>
            </li>
            <li><a href="#" class="p7PMtrg">Insurance Bonds</a>
                <ul>
                  <li><a href="commercialdepositbonds.html">Commercial Deposit Bonds</a></li>
                  <li><a href="residentialdepositbonds.html">Residential Deposit Bonds</a></li>
                  <li><a href="CommercialLeaseBonds.html">Commercial Lease Bonds</a></li>
                </ul>
            </li>
            <li><a href="Under%20Construction%20Page.html">Merchant (Vendor) Finance</a></li>
          </ul>
      </li>
      <li><a href="#" class="p7PMtrg">FAQ's</a>
          <ul>
            <li><a href="Glossary%20Terms%2001.htm">Glossary of Terms</a></li>
            <li><a href="Q&ACreditcode.html">Consumer Credit</a></li>
            <li><a href="Under%20Construction%20Page.html">Commercial Credit</a></li>
          </ul>
      </li>
      <li><a href="Under%20Construction%20Page.html">Success Stories</a></li>
      <li><a href="Under%20Construction%20Page.html">Testimonials</a></li>
      <li><a href="Calculator-Reference.html">Calculators</a></li>
      <li><a href="InterestRates.html">Interest Rates</a></li>
      <li><a href="#" class="p7PMtrg">Useful Links</a>
          <ul>
            <li><a href="Business%20Link.html">Business Links</a></li>
            <li><a href="Baycorp1.html">Veda Advantage(Baycorp)</a></li>
          </ul>
      </li>
      <li><a href="Our_people.htm" class="p7PMtrg">About Us</a>
          <ul>
            <li><a href="coybackground.htm">Our Brief Background</a></li>
            <li><a href="OurCompany.html">Our Company</a></li>
            <li><a href="OurStaff.html">Our People</a></li>
          </ul>
      </li>
      <li><a href="Contactus.html">Contact Us</a></li>
      <li><a href="#" class="p7PMtrg">Other Information</a>
          <ul>
            <li><a href="ConsumerCredit%20Code.html">Consumer Credit Code</a></li>
            <li><a href="Creditworthiness.html">Credit Problems</a></li>
            <li><a href="CreditAssessment.html">Credit Assessment-How?</a></li>
            <li><a href="DebtManagement.html">Debt Management Consolidation??</a></li>
            <li><a href="Under%20Construction%20Page.html">Product Explanation</a></li>
            <li><a href="Under%20Construction%20Page.html">Product Types</a></li>
          </ul>
      </li>
      <li><a href="#" class="p7PMtrg">Enquiry Forms</a>
          <ul>
            <li><a href="careerenquiry.htm">Career Enquiry Form</a></li>
            <li><a href="http://email.webchameleon.com.au/em/forms/subscribe.php?db=145266&s=28070&u=26348& amp;k=feb2526">Finance Enquiry Form</a></li>
            <li><a href="Websitecomment.html">Web Site Comment Form</a></li>
          </ul>
      </li>
      <li><a href="career.html">Career Opportunities</a></li>
      
      
    </ul></td>
    <td height="455" colspan="2" align="left" class="style1"><div class="FHTemplate" id="Layer1">
      <table cellspacing="0" cellpadding="0">
        <tr>
          <td valign="top" colspan="6"><div align="left">
            <p><br />
              <strong>Finance Here</strong> firmly believes   in its ability to achieve complete involvement with its customers needs and   strives to maintain the highest level of customer service and satisfaction. The   services we offer are flexible and can be tailored to your   requirements.<br />
              <br />
              Our company provides an extensive portfolio of Products and   Services which include:<br />
              </p>
            </div></td>
        </tr>
        <tr>
          <td height="10"></td>
          <td></td>
          <td></td>
          <td></td>
          <td></td>
          <td></td>
          <td></td>
        </tr>
        <tr>
          <td height="63"></td>
          <td> </td>
          <td valign="top" rowspan="3"><ul>
              <li>Lo Doc Mortgage Finance - Yes Still Available </li>
            <li>Mortgage Finance </li>
            <li>Equipment Finance </li>
            <li>Construction Finance </li>
            <li>Equity Finance </li>
            <li>Credit Impairment Solutions - Yes Still Available </li>
            <li>Personal Loans </li>
            <li>Bridging Finance </li>
            <li>Caveat Loans (Recent Court Rulings have changed these) </li>
            <li>Mortgage Origination </li>
            <li>Competitive Motor Vehicle Finance Solutions (Full Doc)</li>
            <li>Competitive Equipment & Technology Finance (Full Doc)</li>
            <li>Novated Finance Packages</li>
            <li>Equipment Rental Programs    </li>
            <li>Divorce Finance </li>
            <li>Financial Planning Services (through our Licensed partner) </li>
            <li>Numerous other Finance services (Just ask us) </li>
          </ul></td>
          <td> </td>
          <td> </td>
          <td> </td>
          <td> </td>
        </tr>
        <tr>
          <td height="155"></td>
          <td> </td>
          <td> </td>
          <td valign="top" colspan="3"><img src="brick_house.jpg" alt="Brick House" width="199" height="190" /></td>
        </tr>
        <tr>
          <td height="67"></td>
          <td> </td>
          <td> </td>
          <td> </td>
          <td> </td>
          <td align="center"><form id="form1" name="form1" method="post" action="">
            <label></label>
            <p> </p>
            </form>
            <form action="InterestRates.html" method="post" name="form2" target="_blank" id="form2">
              <label></label>
            </form>            <label></label></td>
        </tr>
        <tr>
          <td height="10"></td>
          <td></td>
          <td></td>
          <td></td>
          <td></td>
          <td></td>
          <td></td>
        </tr>
        <tr>
          <td height="16"></td>
          <td valign="top" colspan="6">Finance Here Home Loan Features and   Benefits we think are important… </td>
        </tr>
        <tr>
          <td height="10"></td>
          <td></td>
          <td></td>
          <td></td>
          <td></td>
          <td></td>
          <td></td>
        </tr>
        <tr>
          <td height="65"></td>
          <td></td>
          <td valign="top" colspan="3" rowspan="3"><ul>
              <li>Mobile Finance Service (we come to you) </li>
            <li>NO management fees. </li>
            <li>DEDICATED Home Loan Specialist to help you when you need   it. </li>
            <li>FREE first valuation (if you settle with us within three   months). </li>
            <li>FREE ATM withdrawals (first five per month). </li>
            <li>FREE offset sub-account. </li>
            <li>FREE redraw. </li>
            <li>Finance Here Mates Rates TM instant rewards. </li>
            <li>DEDICATED Personalised and Proficient Customer Service   Consultants </li>
            <li>DEDICATED Customer Support Team </li>
            <li>DIRECT Contact with your very own Home Loan Manager </li>
          </ul></td>
          <td> </td>
          <td> </td>
        </tr>
        <tr>
          <td height="195"></td>
          <td></td>
          <td> </td>
          <td valign="top"><img src="keys_swinging_hr.gif" alt="Keys" width="145" height="190" /></td>
        </tr>
        <tr>
          <td height="53"></td>
          <td></td>
          <td> </td>
          <td> </td>
        </tr>
        <tr>
          <td height="10"></td>
          <td></td>
          <td></td>
          <td></td>
          <td></td>
          <td></td>
          <td></td>
        </tr>
        <tr>
          <td height="83"></td>
          <td valign="top" colspan="6"><div align="center"><strong><em>We treat you as a person not a   number…</em></strong><br />
                <br />
            Leave   finding the Solution to us!<br />
          </div></td>
        </tr>
      </table>
      </div>    </td>
    <td width="144" height="455" align="left" class="style1"><h4 align="center" class="style5"> Subscribe to our Monthly Newsletter</h4>
      <p align="center"><a href="http://email.webchameleon.com.au/em/forms/subscribe.php?db=145266&s=28065&u=26348&k=82cc23 9" target="_blank">Please Click here</a></p></td>
</tr>
<tr align="center">
    <td class="style1"><p><a href="Disclaimer.html" target="_parent">Disclaimer</a></p></td>
    <td width="334" class="style1"><div align="center"><a href="Privacypolicy.html" title="Privacy Policy" target="_blank">Privacy Policy</a></div></td>
    <td width="356" class="style1"><div align="right">© Finance Here 2006-2010 </div></td>
    <td class="style1"> </td>
</tr>
</table>
</body>
</html>
==============================================
Please let me know if you would like me to post the code for the DWT Template as well.
Thanking you for your time and forbearence.
Regards,
John C

Windows 8.1 Pro upgrade issue (from Windows 8 Pro) on Envy 23 TouchSmart All-In-One...

Hello,
I have an HP Envy 23 Touchsmart All-In-One that I purchased a year ago (around 12/2012). It came preinstalled with Windows 8.
System Information:
a) Intel(R) Core(TM) i7-3770S CPU @ 3.10 GHz
b) 8192 MB of RAM
A few weeks after I had bought the system, I upgraded to Windows 8 Pro with Media Center that I purchased through Microsoft's upgrade program.
Last week (10/19/2013), I saw the upgrade option to Windows 8.1 in the store and decided to upgrade.
After a few minutes, I got a prompt asking me to restart the computer and I did.
However, I noticed that the screen went blank, but it really didn't restart - I saw that the hard disk light was still blinking and I waited for around 15 minutes. I know it didn't restart because if it did I would have seen the HP logo on the BIOS screen. A little later, the system went into sleep mode (at least, the power button light was blinking slowly as if it was on sleep). Since it was late at night, I decided to leave the system alone and decided to check on it next morning. Next morning, it was still in sleep mode (as I feared) - when I tried to wake it up from sleep by moving the mouse/hitting the return key, it made the exact sounds as if it was waking up from sleep (as it always does), but the screen was still blank. The power button slight was glowing steadily indicating that it is awake now.
At this point, I decided to power down the system by holding the power button for a few seconds. Upon reboot, I saw the HP logo on the BIOS bootup screen and then the screen went blank and nothing came up.
So I decided to do a system recovery using my Windows 8 recovery CD and powered down the system with the CD in its slot. This time, the system came up and immediately started restoring my OS to a previous version.
Upon logging in to the recovered system, I got the following message:
"Couldn't update to Windows 8.1
Sorry, we couldn't complete the update to Windows 8.1. We've restored your previous version of Windows to this PC.
0xC1900101 - 0x40019".
I tried reinstalling Windows 8.1 a couple of times after this. Once by disabling all the non-Microsoft services and disabling all the startup programs. Still the same result.
I don't have any antivirus software on my system other the default Microsoft system protection software.
Any help, much appreciated.
Thanks.
This question was solved.
View Solution.

I've posted the following on the following Microsoft form.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/81-install-error-0xc1900...
Since my hardware is the subject of this HP thread, I thought it might be advantagous to others to post it here too.
In the hopes of preventing anyone else expending this amount of time:
HP Envy 23, no external devices except wireless keyboard&mouse
1) Attempted 8.1 from MSDN ISO download and dvd burn. Result: 0xc1900101-0x40019
2) Attempted 8.1 from MSDN ISO download and dvd burn just because I didn't believe number 1. Result: 0xc1900101-0x40019
3) Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
4) Attempted 8.1 from Microsoft store just because I didn't believe number 3 Result: 0xc1900101-0x40019
5) Read online that Task Manager, startup, disable all would work. Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
6) Read online that enabling security to admin group for Crypto directory. Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
7) Read online that ensuring drivers are all current. MS update, HP update, physically clicked on each driver, update in Device manager, Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
8) Read online that turning Firewall off, Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
9) Woke up this morning and evidently Win 8.0 decided on its own to Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
Good news: Fall back to 8.0 has been flawless with the exception of the need to reenter the network key.
Bad news: Still on 8.0
Based on, in every case, the upgraded machine can be: Accessed via admin share c$ from a network device and can NOT be remoted into and the local display is 'illuminated' but not responsive and dark black (BSOD), my GUESS is a screen / display driver is failing on first boot to 8.1
I've reviewed everything on the C: drive with the extension "log" and a date close to the install date/time without success of isolating exactly what is failing.
Hope no one else expends this much time.
David
Professional Developer

Upgrading issue from Snow Leopard 10.6.8 to Mountain Lion

Hello there,
I have a Macbook Pro 15'' which I purchased nearly 2 years ago. I have a dual boot with OS and Windows with boot camp.
PROBLEM: For the past year I have been desperately trying to upgrade my operative system from snow leopard to a later version, without any success.
QUESTION: If I install Mountain Lion on an External Hard Drive, will I be able to use my mac without the external hard drive? Can I use the external hard drive only for the recovery mode? (Refer to point 2) below for more clarification)
The STORY:
First, I tried to install OS Lion. The error I had was that the OS could not create a recovery partition. The problem is well known in the community, but Apple is ignoring requests of costumers and I tried for several months to ask for a solution by contacting tech support. I did not find a solution and at the end I was mostly ignored.
When OS mountain Lion came out I hoped that the new OS would have solved the problem. I was wrong. I bought the update and I had the same problem.
The OS won't install because it can not create a recovery backup.
The problem is well reported in this post:
http://www.macworld.com/article/1167870/hands_on_with_mountain_lions_os_x_recove ry_and_internet_recovery.html
I quote the article which says the iussue is due to:"... if you partitioned the drive using Boot Camp Assistant ... the installer won’t be able to create Recovery HD...". In essence, if you used the Apple software Bootcamp to partition the Mac, then any later OS system won't recognize the partition and will refuse to install the update because they can't create a recovery disk.
Now, this won't be a problem with any other OS, because all you need to do is to manually create the partition , while OSX works only in "automatic" mode. This means I can not upgrade my OS
There are two solutions reported in the article:
1) Back up all your data and Format your hard drive. I actually refuse to do so, ^_^ as I would lose 1-2 days of work just because of the lack of support of Apple
2) Install OS on a external hard drive
This looks like a neat way out . However, I am afraid I will need to bring this Hard drive with me at all time. I was wondering if anyone has experience with this. I so, I would like to ask if I install OS mountain Lion on that Hard drive, will the external drive be used only for the recovery disk?
Please, let me know

Uh uh, I see!
Also it seems I can use my time machine backup:
http://en.wikipedia.org/wiki/Migration_Assistant_(Apple)
together with Migration Assistant. This would work. Thanks
Now I need to figure out the Windows part. I need a full backup of Windows as well, with all the programs. In particular I need to be sure I can maintain the graphic card drivers.
You don't want to know how long took for me to find out how the **** I could update my graphic card drivers in Windows on my Macbook pro. Unfortunately there was a lot of misleading propaganda from Apple about bootcamp, saying that the new intel processor would have worked fine with Windows. Sad that everything was a lie. When installing Windows with bootcamp the graphic card program was unable to find and install the graphic card drivers update . Took me 2 weeks reading through thousands of angry posts of disappointed costumers to find out how to do that. I do not want to reapeat this dreadful experience.
After one year and a half with my Macbook pro I have a system I am TERRIFIED to touch. It is very very fragile, and any little change can destroy everything. It barely works. that's why I am so scared to re-install the OS

Satellite A300 - Windows 7 post upgrade issue

G'Day All,
I have made 2 posts to Microsoft Discussion groups:
*Post 1:*
G'Day All,
Just upgraded two (networked) Vista Systems to Win 7 HP (32-bit).
Minor network/Homegroup problems - all resolved.
Desktop - Fine.
Laptop - ??
Toshiba Satellite 300.
After restart, any login shows 'Performance Options' dialog - no pagefile.
Administrator a/c may change (Automatic/Managed/Manual) - 'Restart required'
as expected.
GoTo previous paragraph (loop).
Any offers?
Regards,
Pat Garard
Melbourne, Australia
*Post 2 (Self-reply):*
For those who may follow ...
The solution may be found at:
http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/ec146153-6439-4d09-be00-1798990e6d2f
>Run the following from an elevated CMD prompt:
> sc config afs start= disabled
>
>(note that the syntax of the command is very particular -
>there is no space before the =, but there is one after it)
>
>Then, reboot.
>To start an elevated CMD prompt, click the start orb,
>type cmd.exe {in the search box at the bottom that has the focus},
>and then in the list right-click CMD.exe and choose "Run as Administrator".
AFS - APPEARS TO BE a distributed network filesystem ...
It would be wonderful if somebody knowledgeable could clarify all this ...
... how it came to be on a Toshiba laptop ...
... Could it be "SQL Server Active Directory Helper" (the only difference
between desktop and laptop) ? ...
... why is it a problem? ...
... is the solution a problem that has not yet manifest? ...
... and its impliications!
Regards,
Pat Garard
Melbourne, Australia
Is there a "Toshiba" explanation?

Hi mate
First of all it seems that its not clear for you that this is a user to user forum
You can start a discussion with common Toshiba notebook users
Back to your posting;
To be honest its not clear for me what you are talking about or what the problem is
You try to upgrade the Vista to Win 7?
Well, please note that there are some installed applications which could not be supported by Win 7!
Maybe you should take a look here:
+Windows 7 upgrade: Step-by-step Upgrade Guide+
http://aps2.toshiba-tro.de/kb0/TSB9902P60000R02.htm
+Windows 7 upgrade: Notes and Restrictions+
http://aps2.toshiba-tro.de/kb0/TSB9A02PE0000R01.htm
Check it! Maybe it could be useful.

Upgrade issue from apex 4.0 to 4.1.1

Dear all expert,
I'm facing an problem on execute sys.dbms_network_acl_admin package after upgrade from apex 4.0 to apex 4.1.1 in Oracle XE 11g R2.
After checking, i found the "XDB.PATH_VIEW" view have compilation error, this cause the sys.dbms_network_acl_admin package failed to compile as well.
My upgrading step as below (apex 4.0 to apex 4.1.1):
1. Drop apex_040000 user by execute "drop user apex_040000 cascade"
2. Drop user flows files by execute "drop user flows_files cascade"
3. I rename existing apex folder (apex 4.0) to apex 2 from c:\oraclexe\app\oracle\product\11.2.0\server.
4. I copy apex folder for apex 4.1.1 (download from oracle website) into c:\oraclexe\app\oracle\product\11.2.0\server.
5. i start activate apex by execute "@apexins.sql", "@apxldimg.sql" and "@apex_epg_config.sql"
Above are the steps that i used to upgrade my apex 4.0 to apex 4.1.1. "sys.dbms_network_acl_admin" package failed to compile after i run "@apexins.sql".
Can anyone advice on how to solve the problem above or what is the way to upgrade apex 4.0 to apex 4.1.1?
Thanks a lot in advance!
Best regards,
Apex Junior

>
After the upgrade from APEX 3.0.2 to 4.0.2.00.07, this HTML code is not interpreted anymore, so now the literal text is displayed instead of a white space.
Is this a known issue???
>
There are several other threads dealing with this issue. See +{thread:id=2126522}+ for example.

Post upgrade issues inSU25 2(B) step

Hi ,
I have few query regarding this SU25 2(B)
1.This step will lists out all the transactions that are modified in older version from SAP Defaults.
I had observed that only the objects for which the modified flag is set in USOBX_C , there is a conflict.
But what about the object which are maintained in older version, for example :S_TABU_DIS, it has been miantained with some auth group value in older version , there is no value maintained in newer version, but it is not showing as a conflict.
If we click on change and save the transaction, will the maintained values in older version wil reflect in the newer version ?
Please clarify on this point.
I want to clarify this point before executing this step.
Thanks,
Sanketh.

thanks for the reply prashanth.
Can you please elaborate how can weget the same SU24 values in ECC 6.0 as in R/3 system.
Sanketh.

EDI/ALE output Post Goods Issue from ME2O

Dear experts,
I have to create an outbound IDoc (I assume MBGMCR03) of a Goods issue done with ME2O (mvt type 541).
So far I have read through:
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=88113280
http://scn.sap.com/thread/3146742
http://scn.sap.com/thread/2056081
but they all talk about printing the message - I need to create an IDoc.
In NACE:
- Application "ME"
- but which condition record can I choose?
- output types are all set up with print parameters - no EDI/ALE as far as I can see. Do I have to create new ones?
Can you please help on how to set this up in NACE?
Next step would be MN21 for the output condition record I assume,
WE20 to define output for logical system.
Thank you for your help.
Best regards,
Peter

Dear experts,
I am a little further now.
I used output condition WA01 which is already set up in NACE and in MN23 I set up:
In SP01 I can see the created Spool entries after creating the Good issue with ME2O. So the print out would work. But I need an EDI output....
I created a new output condition ZWA1 in NACE and set "Processing routines" to EDI.
I set "Partner functions" to EDI and LS - logical system.
In MN23 I have:
I set Event Type to "WA" because when I look at a material document in MB03 it also shows WA:
In WE20 I have my LS - logicals system and set up the output for MBGMCR03:
What confuses me is: I have to send the EDI output to a LS - logical system. But in MN23 I can't set the LS - it gives error: "You cannot enter a partner function for output ZWA1"
No IDoc is created so far - please help. Thank you.
Best regarsd,
Peter

Upgrade issue from 3.5 to 7

search the forums
hi
i just want to know what is the most critical issue and difficult problem one can come across when we do the upgrade?
what will most difficult issue you guys faced during technical upgrade and also doing functional upgrade?
can you please throw some points? apreciate your help on this
Edited by: Arun Varadarajan on May 13, 2009 8:21 AM

duplicate of Issue at upgrade 10g to 11.1.1.7

IPhoto '11 upgrade issue from '09

I am running 8.1.2 on my Mac, with OS 10.7.5. I purchased/downloaded Iphoto '11 from App Store and installed. When I do, all the events/pictures are blank (the "shell" of events is there, but all black). I freak out, then restore from Time Machine. What do I need to do differently to upgrade?

apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Post upgrade issues from Timezone setting

Similar Messages

Maybe you are looking for