Post upgrade issues inSU25 2(B) step
Hi ,
I have few query regarding this SU25 2(B)
1.This step will lists out all the transactions that are modified in older version from SAP Defaults.
I had observed that only the objects for which the modified flag is set in USOBX_C , there is a conflict.
But what about the object which are maintained in older version, for example :S_TABU_DIS, it has been miantained with some auth group value in older version , there is no value maintained in newer version, but it is not showing as a conflict.
If we click on change and save the transaction, will the maintained values in older version wil reflect in the newer version ?
Please clarify on this point.
I want to clarify this point before executing this step.
Thanks,
Sanketh.
thanks for the reply prashanth.
Can you please elaborate how can weget the same SU24 values in ECC 6.0 as in R/3 system.
Sanketh.
Similar Messages
-
Hello Gurus,
we are upgarding SAP from 4.6c to ECC 6.0.
As a part of post upgarde activities , i am executing SU25 2(B)-(D) steps.
While analysing SU25 2(b) step, i had found that few authorization objects which are checked in 46c version and not found in SU24 proposal in new version.
For example:
for transaction CG02 , in 46c sU24 proposal authorization objects C_SHEP_TPP is check/maintain, whereas in ECC version this authorization object doesnot appear in the SU24 proposal of CG02 transaction.
Also there are few objects which are check maintain in R3 version and Do not check in the new version for the same transaction.
How should i get the same SU24 values in ECC version as in R/3 version ?
This is my first upgrade project, iam very much confused with these inconssitencies, any help is very much appreciated.
Thanks,
Sanketh.I have found all such type of Conflicting tcodes and sent for client approval.
Meanwhile, iam doing Su25 2(B) for remianing transactions, i had a doubt here the SAP defaults for R/3 are not the same as in the ECC version, Suppose for transaction /SAPSMOSS/QM12
Authorization objects PLOG ,PABAP,P_ORGXX,S_dataset,S_develop are maintained as check in R/3 whereas in ECC the SAP defaults for these objects are Check No.
Whether i should change the proposal to Check Yes in ECC version or maintain the SAP Defaults as it is in ECC version.
Will it affect to be any authorization issue, please clarify.
Thanks,
Sanketh. -
SCOM 2012 R2 Post upgrade issues
Hey all,
yesterday we upgraded our SCOM environment from 2012 SP1 to R2. All of the installers ran fine without any issues. After a couple reboots it was back up however we have run into some issues.
Issue 1: The ACS seems to be broken. I can usually run a query on the ACS database manually and get back audit entries. However, now I am getting nothing back at all. Here are the errors that are repeated every few minutes on both
management servers. I did run the ACS upgrade on them both yesterday.
Error occured on database connection:
Status: 0x00040000
ODBC Error: 14
ODBC State: 01000
Message: [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).
Database: Register
Connection: ComplianceTest
Statement: -
Error occured on database connection:
Status: 0x00200001
ODBC Error: 14
ODBC State: 08001
Message: [Microsoft][ODBC SQL Server Driver][DBNETLIB]Invalid connection.
Database: Register
Connection: ComplianceTest
Statement: -
Issue 2: Our UNIX agents are all greyed out now and when I try to upgrade them I get the following error.
EDIT: and here is something else I just found on our other management server
Any info would be great
Thanks
Warm Fuzzies!I am going to update this post. The service is still crashing nightly. The views dvAll, dvAll5 and dvHeader are not being created. I tried the fix provided by the Microsoft rep and it did nothing. I have uninstalled and reinstalled
the ACS server multiple times and the views are never created. When I start the ACS services I get the same errors.
AdtServer encountered the following problem during startup:
Task: Load Certificate
Failure: Certificate for SSL based authentication could not be found. SSL authentication will be disabled
Error: 0x00000002
Error Message:
The system cannot find the file specified.
Error occured on database connection:
Status: 0x00040000
ODBC Error: 4624
ODBC State: 01000
Message: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot grant, deny, or revoke permissions to sa, dbo, entity owner, information_schema, sys, or yourself.
Database: SqlWriter
Connection: Maintenance
Statement:
I see where the forwarders are connecting. No other errors or messages. The service is set to start up as the Network Services account. The DOMAIN\SERVER$ has a logon and is mapped to the SQL user AdtServer on the OperationsManagerAC database.
We have almost a terabyte of data that we cannot get to after the R2 upgrade.
Very frustrating!!!!
Warm Fuzzies! -
Post upgrade issues from Timezone setting
Everyone,
We just upgraded from 4.5 -> version 6.0 SP1 (so we first upgraded the data to 4.5 WS then to version 6)
After the upgrade, we saw the web service registration to have the send timezone setting to portlet as checked for all the portlets that were upgraded/migrated.
Then after the DB upgrade, we saw some portlets not displaying because of a person's time zone setting. This went a step further and there are users who reported that they can't access the change locale settings page or even add portlets to their page.
A PT spy of the users experience showed this particular error: com.plumtree.portalpages.browsing.portalsettings.localesettings.LocaleSettingsView LocaleSettingsView::Display An error occured when trying to display the HTML.
System.InvalidCastException: Specified cast is not valid.
at com.plumtree.portalpages.browsing.portalsettings.localesettings.LocaleSettingsModel.GetTimeZoneSetting() in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\portalsettings\localesettings\LocaleSettingsModel.cs:line 192
at com.plumtree.portalpages.browsing.portalsettings.localesettings.LocaleSettingsView.Display() in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\portalsettings\localesettings\LocaleSettingsView.cs:line 59
I noticed that the cast error originates from the GetTimeZoneSetting() method. This led me to believe that some values in the DB were unexpected. True enough, I noticed that for the strTimeZone preference some users has a value of 1/-1 and the PrefValueType is set to 3 (instead of 8). After modifying this we resolve the issue and the users could proceed as normal.
My question is that has anyone else experienced a similar issue(or is this just specific to our environment)? Also is there a list of settings/preference you need to check for data integrity after an upgrade? Thanks!I experienced an issue similar to this once. I don't know if it was exactly the same because it was a 4.5 to 5.x upgrade done a couple years ago, but it sounds like pretty much the same thing. I also tracked it down to a pref problem in the database. I had to manually fix the bad values, but that resolved the problem, and that was the only problem of that type I encountered. That doesn't mean you won't find anything else strange with your upgrade, but it seemed to be a strange isolated incident to me. I have done many upgrades since that time, and never encountered the problem again. I would suspect that if you have fixed all the database records that were affected by this, then you are probably OK.
DJ Dewey | VHA Inc. | [email protected] -
Satellite A300 - Windows 7 post upgrade issue
G'Day All,
I have made 2 posts to Microsoft Discussion groups:
*Post 1:*
G'Day All,
Just upgraded two (networked) Vista Systems to Win 7 HP (32-bit).
Minor network/Homegroup problems - all resolved.
Desktop - Fine.
Laptop - ??
Toshiba Satellite 300.
After restart, any login shows 'Performance Options' dialog - no pagefile.
Administrator a/c may change (Automatic/Managed/Manual) - 'Restart required'
as expected.
GoTo previous paragraph (loop).
Any offers?
Regards,
Pat Garard
Melbourne, Australia
*Post 2 (Self-reply):*
For those who may follow ...
The solution may be found at:
http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/ec146153-6439-4d09-be00-1798990e6d2f
>Run the following from an elevated CMD prompt:
> sc config afs start= disabled
>
>(note that the syntax of the command is very particular -
>there is no space before the =, but there is one after it)
>
>Then, reboot.
>To start an elevated CMD prompt, click the start orb,
>type cmd.exe {in the search box at the bottom that has the focus},
>and then in the list right-click CMD.exe and choose "Run as Administrator".
AFS - APPEARS TO BE a distributed network filesystem ...
It would be wonderful if somebody knowledgeable could clarify all this ...
... how it came to be on a Toshiba laptop ...
... Could it be "SQL Server Active Directory Helper" (the only difference
between desktop and laptop) ? ...
... why is it a problem? ...
... is the solution a problem that has not yet manifest? ...
... and its impliications!
Regards,
Pat Garard
Melbourne, Australia
Is there a "Toshiba" explanation?Hi mate
First of all it seems that its not clear for you that this is a user to user forum
You can start a discussion with common Toshiba notebook users
Back to your posting;
To be honest its not clear for me what you are talking about or what the problem is
You try to upgrade the Vista to Win 7?
Well, please note that there are some installed applications which could not be supported by Win 7!
Maybe you should take a look here:
+Windows 7 upgrade: Step-by-step Upgrade Guide+
http://aps2.toshiba-tro.de/kb0/TSB9902P60000R02.htm
+Windows 7 upgrade: Notes and Restrictions+
http://aps2.toshiba-tro.de/kb0/TSB9A02PE0000R01.htm
Check it! Maybe it could be useful. -
"The feature you are trying ot use...." iTunes post upgrade issue
Hi,
Tried to download the automatic upgrade for Quicktime & iTunes. Something went wrong I guess.
When I try to open iTunes now, it gives me an error message that says "This action is only valid for products taht are currently installed."
If I try to uninstall iTunes (through Control Panel), or run the upgrade program again through Quicktime (which works fine), or try to run a brand new setup file for iTunes, I get a Windows Installer dialog that states "The feature you are trying ot use is on a network resource that is unavailable."
It then gives me the option for which source to use for the installation package 'iTunes.msi'
I've tried putting in both the iTunes.msi and the iTunesSetupAdmin.msi in there, both of which result in saying that the path for iTunes.msi cannot be found.
I am the only user on this computer, and have Admin privedges. Any ideas?Solved problem myself after over an hour of googling/searching these forums for answer:
The reason this wasn't working, it seems, is because while upgrading I didn't click "Accept" on the user agreement, and restarted the computer before accepting. I tried playing a file that is associated to open with iTunes (which isn't my default mp3 player), and a dialog popped up for me to accept the agreement. Clicked accept, iTunes immediately started working.
Feel real dumb now, hope this thread helps someone else one day. -
BW 7.0 to 7.3 upgrade-Post upgrade activity and Transport the changes
Hi Experts,
We have upgraded our BW system from Release 7.0 to 7.3. As part of Security post upgrade activity I ran Migration steps,
RSECADMIN-Extras->Migrations->Migration:Release 7.0 to Release 7.3. and later SU25 steps too.
I fixed the Roles appeared in SU25 Step 2C and made below Characteristics as auth relevant,
0TCAACTVT
0TCAIPROV
0TCAVALID
But I have few doubts before Quality movement,
1) Do I need to Run the Migration steps again in Quality and Production?
RSECADMIN-Extras->Migrations->Migration:Release 7.0 to Release 7.3
2) Do I need to transport only above Characteristics to Quality and Production or need to transport all the Characteristics and Analysis Authorization?
3) How to transport Characteristics?
Please provide your views.
Regards
ParagHi,
Technically its possible but it has its own consequences again based on the kind of object that you are going to Tranport.
The above statement is applicable considering that you have 3.x flow in Bi7.0 system and with no DTP's or transformation etc...
And if the BI7.0 is Unicode and 3.5 system is non-unicode then you will have lot of issues and most of the times you need Basis help to resolve the issues. So its bit risk to move the transport this way.
So its better to develop the objects once again in 3.x system and then transport from D to Q and to P as a standard practice.
Hope this helps.
Murali -
ASU-process POST Upgrade Step on SQL database
Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List Severity SAP R/3 release frm SAP R/3 release to
IS-OIL Application Test 600 Optional
KP06xx: Termination SYNTAX_ERROR Obligatory 470 500
CGPL: Entries are blank after upgrade Obligatory
Error handling of task group execution Optional
Mobile device cannot confirm TO after release upgrade Obligatory 470 600
Mobile device doesn't find transfer orders after upgrade Obligatory 470 600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Convert customizing for warehouse funds ctr scenarios Optional
Various problems classification commitment items (class type Obligatory
Unauthorized error messages udring fiscal year change/reassi Obligatory
RFFMUDX1 migrates incomplete budgeting tables Obligatory
Non-7bit-ASCII character used for BCS key figures Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Migration to ERP 6.0 (EA-PS 6.00) Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00) Obligatory
Missing initialization of new fields in table ANLZ Obligatory 46C 470
Activating VMC for the Internet Pricing and Configurator Obligatory
Customer specific BSEG-fields not transferred Optional
Conversion of report headers in drilldown-reporting Optional 600
IBase: Upgrade to Release 4.6C and higher Optional 46C 600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher Optional 46C 470
Conversion of CO-Total-Tables Obligatory 46C 500
Conversion of CO-line-item table COEP Obligatory 46C 600
New General Ledger, problems in CO-documents Obligatory 500
No receivers found in allocations Obligatory 46C 470
Conversion Of New Process Parameter Long Texts For Search Optional 110 600
Migration of process parameters in recipe management Optional 110 600
FAQ new depreciation calculation Optional 600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT Obligatory 100 500
Reloading Table T512W Optional
Converting Short Texts Obligatory
Migrating Data Optional 4.7
Activating SAP ECC Extensions Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
VinayHi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade. SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit -
Upgrade step ASU-process post upgrade step
Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List Severity SAP R/3 release frm SAP R/3 release to
IS-OIL Application Test 600 Optional
KP06xx: Termination SYNTAX_ERROR Obligatory 470 500
CGPL: Entries are blank after upgrade Obligatory
Error handling of task group execution Optional
Mobile device cannot confirm TO after release upgrade Obligatory 470 600
Mobile device doesn't find transfer orders after upgrade Obligatory 470 600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Convert customizing for warehouse funds ctr scenarios Optional
Various problems classification commitment items (class type Obligatory
Unauthorized error messages udring fiscal year change/reassi Obligatory
RFFMUDX1 migrates incomplete budgeting tables Obligatory
Non-7bit-ASCII character used for BCS key figures Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Migration to ERP 6.0 (EA-PS 6.00) Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00) Obligatory
Missing initialization of new fields in table ANLZ Obligatory 46C 470
Activating VMC for the Internet Pricing and Configurator Obligatory
Customer specific BSEG-fields not transferred Optional
Conversion of report headers in drilldown-reporting Optional 600
IBase: Upgrade to Release 4.6C and higher Optional 46C 600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher Optional 46C 470
Conversion of CO-Total-Tables Obligatory 46C 500
Conversion of CO-line-item table COEP Obligatory 46C 600
New General Ledger, problems in CO-documents Obligatory 500
No receivers found in allocations Obligatory 46C 470
Conversion Of New Process Parameter Long Texts For Search Optional 110 600
Migration of process parameters in recipe management Optional 110 600
FAQ new depreciation calculation Optional 600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT Obligatory 100 500
Reloading Table T512W Optional
Converting Short Texts Obligatory
Migrating Data Optional 4.7
Activating SAP ECC Extensions Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
Vinay
Edited by: Vinay Paul on Sep 11, 2009 10:11 PMHi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade. SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit -
Error on Oracle 11gR2 RAC database Post upgrade step
[Upgrade the Oracle Clusterware Configuration|http://docs.oracle.com/cd/E11882_01/server.112/e23633/afterup.htm] Problem Description:
O.S Version: HP-UX B.11.31 U ia64
It is upgrading of Oracle RAC 2 node database from 11.1.0.7.0 to 11.2.0.3.0
I receive following error while perfoming the post upgrade step
indba1 racdb> srvctl upgrade database -d racdb -o /app/oracle/product/11.2.0.3/db
PRCD-1231 : Failed to upgrade configuration of database racdb to version 11.2.0.3.0 in new Oracle home /app/oracle/product/11.2.0.3/db
PRKC-1136 : Unable to find version for database with name racdb
Actually I am performing the step "Upgrade the Oracle Clusterware Configuration" whill getting the error.
When I tried on below;
indba1 racdbp> srvctl upgrade database -d racdb -o /app/oracle/product/11.2.0.3/db
PRCD-1231 : Failed to upgrade configuration of database racdb to version 11.2.0.3.0 in new Oracle home /app/oracle/product/11.2.0.3/db
PRKC-1136 : Unable to find version for database with name racdbOutput from Oracle 11.1.0.7 Home:
oracle@indba1:/app/oracle/product/11g/db_1 $ srvctl config database -d racdb
PRKR-1001 : cluster database racdb does not exist
PRKO-2005 : Application error: Failure in getting Cluster Database Configuration for: racdb
Output from Oracle 11.2.0.3 Home:
oracle@usfsdba1:/app/oracle/product/11.2.0.3/db $ srvctl config database -d racdb
PRKR-1001 : cluster database racdb does not exist
PRKO-2005 : Application error: Failure in getting Cluster Database Configuration for: racdb -
Upgrading Oracle Text - Post upgrade step 10.2 to 11.2
I already upgraded my 10.2.0.4 database to 11.2.0.1 and have to do post upgrade steps. In step 39 of Manual guideline (837570.1) is not clear for me. If some one can explain further would be appriciated. When i check my source ORACLE_HOME/ctx/admin/ctxf102.txt or ctxf102.sql
Step 39
Upgrading Oracle Text
Copy the following files from the previous Oracle home to the new Oracle home:
* Stemming user-dictionary files
* User-modified KOREAN_MORPH_LEXER dictionary files
* USER_FILTER executables
To obtain a list of the above files, use:
$ORACLE_HOME/ctx/admin/ctxf<version>.txt
$ORACLE_HOME/ctx/admin/ctxf<version>.sql
where version is 920,101,102
For instance, if upgrading from 10.2.0
*1. For dictionary files check*
*$ORACLE_HOME/ctx/admin/ctxf102.txt*
*2. Execute the script as database user SYS,SYSTEM, or CTXSYS*
*$ORACLE_HOME/ctx/admin/ctxf102.sql*
If your Oracle Text index uses KOREAN_LEXER which was deprecated in Oracle 9i and desupported in Oracle 10g Release 2, see below Note for further information on manual migration from KOREAN_LEXER to KOREAN_MORPH_LEXER.
Note 300172.1 Obsolescence of KOREAN_LEXER Lexer TypeHi Srini
Thank you very much. now i got it.
Oracle asked me to identify the CTXCAT indexes with KOREAN_LEXER execute the following query as user CTXSYS: if nothing return then i can skip this step.
SELECT idx_name
FROM ctxsys.ctx_indexes
WHERE idx_type = 'CTXCAT'
AND idx_name IN
(SELECT ixo_index_name
FROM ctxsys.ctx_index_objects
WHERE ixo_class = 'LEXER'
AND ixo_object = 'KOREAN_MORPH_LEXER ');
SELECT isl_index_owner,isl_index_name,isl_language
FROM CTXSYS.ctx_index_sub_lexers
WHERE isl_object = 'KOREAN_MORPH_LEXER'; -
HI Friends,
I have upgraded my EP from 6.0 to 7.0 successful with all component. ALos i am getting login screen. SO what are post upgrade step for EP.
Thanks,
Regards,
SachinHI ,
System restart
run the SICK verify the installation check
Check developer traces on the operating system. Log on to
Check the installed license and profile configuration (RZ10 and PFCG)
confirm the operation modes
Perform a client copy
Check the status of the SAP Web AS Java and the user SAPJSF
Check the rdisp/j2ee_start profile parameter
Check the current state of SAP Web AS Java using transaction SMICM
SAP Load Generator
Start SAP Load Generator (SGEN)
Regards, -
Post Upgrade Step "Adjust custom development"
Hello all:
Based on your BI 3.x to 7.0 upgrade experience, I wanted some insight on the post upgrade step "Adjust custom development per note 857904". Can you please share how you handled this, any details of activities done here...any tips?
Thanks,
PravinHi Pravin,
Hope this helps you -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881 - you can use this checklist for 2004s too!
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0d7c290-0201-0010-bbaa-d8f8af341796
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a1a0eb43-0b01-0010-23aa-908cc4eaabcd
Bye... -
please tell me post upgrade step of R12.1.3
we restore backup of r12.1.3
please tell us post upgrade step
on rhel 5.4
Edited by: user9376205 on May 11, 2011 12:06 AMplease tell me post upgrade step of R12.1.3What post upgrade steps you are referring to?
All the steps are documented in MOS doc.
Oracle E-Business Suite Release 12.1.3 Now Available
http://blogs.oracle.com/stevenChan/2010/08/ebs_1213_available.html
we restore backup of r12.1.3
please tell us post upgrade stepIf you restore the files, why you need post upgrade steps?
Thanks,
Hussein -
Change Log issues - Post Upgrade
Hi Experts,
We are in the process of Upgrading BW from 3.X to BI 7. As part of this we copied our existing Production system into the sand box and basis did the technical upgrade on the same (Sand Box). Later we ran some post upgrade Jobs as part of the SAP defined Upgrade Process.
1) But after the upgrade i can notice that most of the ODS objects, doesn't have 'Change Log' table in the 'Information (Log/Status)' screen.
2) Even when i try to view the change log content in Manage screen, it gives me a pop up to enter the change log table, instead of directly taking me to the selection screen.
3) When i try to activate a request, even that fails with an SQL error 'SAPSQL_EMPTY_TABNAME'.
Is there any process that has to be run to link the Older version change log tables to the corresponding ODSs after Upgrade?
Has anyone come accross similar issues? If yes, how was it solved? All suggestions are invited.
Thanks and Regards,
JayHI JayaPrasad,
Chek the note : 1059171 which is related to Change log,
I too faced this issue when upgraded to Bi7.0 on SP12, but as soon as SP13 is installed the issue is solved, so I suggest to go for SP 13 for upgrading to Bi7.0.
Regards,
Srinivas
Maybe you are looking for
-
Nano 3rd generation recently purchased is not recognized by iTune Account
I recently purchased a Nano 3rd generation that has no songs or any other type of media on it. It does have a device name "user1". I need to change the device name to match my current iTunes account so that it can be synced with iTunes. I ran the d
-
Unable to open page through apache web server
No one is able to open page through webserver it's giving message You don't have permission to access / on this server. Can any one help.
-
ITunes will not close! possible scripting issue
i'm coming across this situation almost daily, iTunes will refuse to close when i hit the close button or go File -> Exit. sometimes i will get a prompt that iTunes is scripting but usually it just doesn't respond to either methods of closing. obviou
-
Seeking details on RESULT_CACHE statistics
I'm running 11.2.0.1, and I'm just beginning to look into the server result caching feature introduced in 11g. I'm evaluating the basic effectiveness of queries and the cache by watching query response times and monitoring v$result_cache_statistics.
-
How do you maintain multiple device music lists from 1 computer?
How do you maintain different music lists on separate devices to be synched from one computer? Is it best to establish multiple ID's?