Post Windows 7 Install Issues with T500

Windows 7 install went smoothly, but everything else thereafter is not working properly:
- Updated BIOS per system update 4.0, the computer tries to reboot but is frozen with the Thinpad start up screen, fan going at full speed and all the little indicator lights for power, battery, caps lock, num lock, etc all lit up
- Ericsson F3507g Mobile Broadband Minicard is powered up, but the "connection manager" app that existed before is no longer there (I believe it was called "find wireless networks / profiles" in the start menu)
- The blue "ThinkVantage" button, when pressed, now does nothing
Help please!!
T500 / 4GB / T9600 processor

Now just got another notification from Windows: "Intel Active Management Technology (AMT, including IMEI and SOL) isn't working properly because it isn't compatible with this version of Windows" The other message: "Your wireless card isn't working properly because a compatible driver is not available for this version of Windows" ARGH!!

Similar Messages

  • Where is the forum for Windows Update issues with Windows 10 TP 9926

    Trying to find a fix to the Windows Update issue with Windows 10 TP 9926 build and can't find the correct forum to post this question?
    This will impact receiving the new build upgrades and will impact test strategy for the new supported OS in our desktop application.

    Might try them over here.
    http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1427037339534
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Boot and OS install issues with K8T Neo2 F

    Can anybody shed light on my difficulties?
    Assembled a new computer yesterday.  First power-on produced nothing except 3 (2,3,4) red leds on d-bracket.  After reading several postings, tried the following:
    Swapped around memory modules;
    Did repeated JBAT1 data clears (NB if you happen to get a board with the V1.0 user guide, note that the JBAT1 diagram appears upside down - pin one is closest to the SATA slots (page 2 - 24).  The MSI downloadable user guide (V1.2) has that error corrected (page 2-25)
    The only memory config that doesn’t produce three red leds is with one 512 stick installed in channel 3 (green).
    Can now get to the point where Windows XP boots to the point where install is about to start, and then advises me that it can’t find a hard disk!
    Have dis/reconnected the sata cable (using different cables) and checked the bios setup but can find nothing strange except that setup refers to the hard disk as BBS 0 (RAID) ST3120827AS - the reference to “RAID” worries me.

    Paul, there have been people here that have had to strip their  system down to the bare minimum hardware to get windows to complete the install, so try that. I had trouble completing my windows install as long as I was trying to install the RAID drivers at F6. So I ignored the prompt at F6 and windows installed fine. Then I installed my RAID drivers afterward.
    These things are extremely sensitive when it comes to memory. I had the same problem you are having. Mine was cured by a BIOS upgrade to ver. 3.3. The simplest way to do it is to use "Live Watch". It will locate BIOS ver 3.3 for you, and download it to a floppy along with the flash program, and make it bootable all in one easy step. Then all you have to do is boot from the floppy you just made, and follow the instructions. Very simple.
    I've read all these stickies and posts now going way back, and IMHO anyone who wants to use RAM thats not on the list should do so at their own risk. Interestingly enough, the recommended list from MSI is not the same as the list from AMD. And the memory manufacturers have their own lists of RAM that they say will work with this board. I'm using 2x 512 sticks of GEIL from the MSI recommended list.
    Check out these links to see what I mean. By the way, if you haven't noticed, most of the older posts about memory problems are with respect to the K8T Neo FIS2R which is a socket 754 single channel board, so although they are similar, they're not the same. My point is just because his K8TNeo FIS2R works fine with brand "X" RAM doesn't mean your K8T NEO2 FIR will.
     http://www.msi.com.tw/html/products/mainboard/testreport_pdf/6702E/memory.pdf
    http://www.crucial.com/store/listparts.asp?Mfr%2BProductline=MSI+%28Micro+Star%29%2B+Motherboards&mfr=MSI+%28Micro+Star%29&cat=RAM&model=MS-6702E+%28K8T+Neo2-FIR%29&submit=Go
    http://www.mushkin.com/epages/mushkin.storefront/EN/product/991140
    http://www.amd.com/us-en/assets/content_type/DownloadableAssets/Athlon_64_Unbuffered_DIMM_AVL.pdf
    http://www2.amd.com/us-en/Processors/TechnicalResources/1,,30_182_869_9460%5e9461,00.html?1094454813
    Good luck!

  • APEX Listener 1.1.4 install issue with listener configuration

    Oracle XE 11gR2
    APEX 4.1.1
    APEX Listener 1.1.4
    Glassfish 3.0.1
    =============
    Installing APEX Listener 1.1.4 to replace APEX Listener 1.0.2. Deployed apex.war file but now:
    (1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images. Still I can enter data into fields. Wonder why the graphics/images are missing when page is rendered.
    (2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". I can connect via SQL Developer to APEX_PUBLIC_USER with same credentials. I was able to connect before with previous APEX Listener.
    Any ideas?

    Hi,
    (1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images.
    You either have to clean your browser cache or your browser is too old/not capable of rendering the css of APEX Listener correctly.
    (2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". "Permission denied" doesn't sound an issue with your database configuration. Do you have anything in your APEX Listeners log (probably within your GFs server.log) for that issue?
    But perhaps the error disappears as soon as you also get a proper configuration page.
    -Udo

  • App-V 5 SP2 install issue with Intel NIC Driver 11.16.96.0

    When deploying App-V 5 SP2 using SCCM 2007 it will install with no problem on the machine.  However, when the user reboots after the install the machine will blue screen.  The user then reboots again and machine comes up to the desktop.  However,
    the App-V service is not running and is still set to automatic.
    Looking at the Blue Screen dmp file the common theme looks to be a conflict with an Intel NIC driver version 11.16.96.0.  Machines running an older version of the driver do not experience the issue with the blue screen after reboot and the App-V service
    starts with no issues.
    Has anyone seen this issue before?

    Version 19 appears to be the latest: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18713&lang=eng&ProdId=3025
    Have you tested with this version instead?
    Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
    answer your question). This can be beneficial to other community members reading the thread.
    This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
    Twitter:
    @stealthpuppy | Blog:
    stealthpuppy.com |
    The Definitive Guide to Delivering Microsoft Office with App-V

  • Install issue with CD drives / and burning

    I am running Windows Vista 64 on a new computer I built (latest ASUS P5K-E with a quad Q6600 cpu and 4gigs of RAM). I transferred all my music and installed iTunes. Everything is working fine except for the burning of disks. It did give me a prompt at the end of the iTunes install and on first startup that there may be a problem recognizing the CD drives. However, there is no problem importing music on those CD/DVD burner drives -- but I cannot burn on those drivers. I can burn using other software on these drives -- no issues with the drives at all. Under iTunes "Preferences", and 'Burning' it states "No supported Disk burners found". Both are Lite-on CD/DVD burner drives and less than a year old -- and of course worked on the old XP computer with iTunes. I have uninstalled, reinstalled iTunes -- no luck. Any ideas? This looks to be something in the Registry on install, but not sure what to do. Any help appreciated.

    You may need the CD Configuration folder too, after you install the drivers.
    Here is the CD Configuration folder, with the Files you need Just Unzip it and place the CD Configuration Folder into Your C:\Program Files (x86)\iTunes Directory
    http://stahlhammer89.com/apple/CD_Configuration.zip
    I had my friend with Windows Vista x86 Install iTunes and give me the Folder and Files I needed.
    Hope this helps you

  • ColdFusion 8.01 install issue with Win2008 server

    I am having an issue with the installer on ColdFusion 8.01 in Win2008 server.  I have done 5 or 6 identical installs with no problem so this caught me by surprise,  The server OS is Server 2008 R2 Enterprise service pack1.  I am running the install (coldfusion-801-win.exe) as an administrator in emulation mode (Windows Server 2003 service pack 1). The following is the error i get.   As I stated earlier I have done this exact install, both single & multi-server, on 5 or 6 Win2008 servers with no issue.  Any help would be appreciated.

    It is definitely possible as I did it some time ago, alas don't have notes any more. Unless anyone here has some specific build notes on it, it's just a case of "Google is your friend" unfortunately.

  • 7.6.1 has install issues with XP Home

    On a clean install of XP Home, both iTunes 7.6.1 and 7.6.0.29 fail installation and show an alert that "itunesphotosupport.dll" cannot be accessed because it does not have permission. However, I'm signed in as Administrator.
    I've tried downloading with both IE7 and FF, but the result is the same. Even went back to a restore point created after XP was updated and before any additional programs were installed.
    Judging from the number of users who are having issues with 7.6 one has to conclude that the program was released prematurely. I'm not going to sell my Apple stock, but wish they would stop imitating Microsoft.

    I would like to get an install log:
    1. Choose Run from the Start menu.
    2. Type cmd and press Return.
    A command prompt window appears.
    3. Drag the iTunesSetup.exe (make sure it is iTunes 7.6.1) file from
    your desktop or downloads folder into the window.
    4. Type a space and then this text: /l*v C:\log.txt
    5. Hit Return
    The iTunes installer runs and creates log.txt in your C:\ drive.
    6. Attach that log.txt file to an email back to me <[email protected]>.

  • MultiMedia Center for Think Offerings install issues with Vista

    Hello,
    I recently upgraded my ThinkPad Z60m to Vista by doing a clean install from disk.  Since this process involves manually installing each of the ThinkPad utilities manually (no pre-built image for Vista, only XP), I have ran into some issues with the installer for the MultiMedia Center for Think Offerings.
    According to the Support & Download page, there are two downloads available for the Z60m and both have issues (or errors) that are preventing me from installing the application.  Below are the two products and reasons for not installing:
    "MultiMedia Center for Think Offerings for Windows XP and 2000"
    Problem: Does not install on Vista
    Error message: "Could not open \device\physicalmemory"
    "MultiMedia Center for Think Offerings for Windows Vista"
    Problem: ThinkPad Z60m is not a supported
    Error message: "This program is not for machine type 2529EAU"
    What I am looking for is an installation of MultiMedia Center for Think Offerings that supports users who have upgraded from XP to Vista (or downgrade depending on your feelings of Vista  ).  I have not found anywhere saying that upgrades from XP to Vista are not supported, so I should expect that software updates should be available for ThinkPad products on either platform.
    Thanks in advance for your help.

    I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
    1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
    2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
    Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well.  Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
    TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

  • BAPI to post a Goods issue with relation to Sales Order?

    Hi Everyone,
    After creating a delivery order, I need a BAPI to automatically post a goods issue for this DO.
    I tried using BAPI_GOODSMVT_CREATE but it returns the message 'Goods Movement not possible with mvmt type 601'.
    Any advice?
    Best Regards,
    Junwen

    Hi John,
    My data are as follows:
    GOODSMVT HEADER:
    PSTNG_DATE: 30.09.2004
    DOC_DATE: 30.09.2004
    REF_DOC_NO: had tried 1014000359 or empty
    GOODSMVT_CODE: 03
    GOODSMVT_ITEM:
    MATERIAL: HP0121002
    PLAN: 1010
    STGE: 10FG
    BATCH: BATCH1
    MOV: 601
    CUSTOMER: 180017
    ENTRY_QNT: 1
    ENT_UOM: PC
    ENT_UOM_ISO: PC
    DELIV_NUMB: 1014000359
    DELIV_ITEM: 000001
    From your feedback, it is possible to use the BAPI to create a goods issue for movement type 601?
    Best Regards,
    Junwen

  • Vertex install issues with 46C - RFC setup?

    Dear Fellow SAPoniSeries'ers,
    We have installed the Vertex Q Series tax software with our SAP 46c implementation and we are having issues with the Remote Function Call (RFC) setup. We know that Vertex and SAP programs need to have the same "signatures" for the LIBRFC service program, and when we finally figured that out, but now we get the following message for the VERRFC but the RFCTEST works ok;
    "time out during allocate /CPI-C error CM_PRODUCT_SPECIFIC_ERROR"
    It appears that the RFC is trying to run as it does not immediately fail. VERRFC and RFCTEST are both now bound to VERQSU/LIBRFC service program.
    We have upgraded to the ASCII database format, we are running OS/400 V5R3 and the Vertex software is Translink 2.0.22.
    I would GREATLY appreciate any advice or lessons learned.
    THANK-YOU!
    Tim Murphy
    Nalge Nunc International
    Rochester, NY USA

    Tim, I don't recall just how we fixed this, but we had the same isses.  Here is a cut/paste from an email I have from Vertex...this is a bit old, but may give some insight:
    In the past, we have encountered issues when customers upgraded their SAP
    Kernel on the AS400 (ex: going from LIBRFC 44 to LIBRFC 48)with a different
    version of the SAP service program. For convenience  Vertex started
    providing a backup LIBRFC file in the event a problem was encountered that
    caused calls to Translink (VERRFC) to fail because of incompatible or
    unmatched signatures in a newer release of SAP's LIBRFC.
    We have also encountered similar issues when upgrading Translink, as you
    became aware when you applied your recent Vertex 3.0 & 3.1 upgrades.
    Because we need to be compatible with various releases of R/3, we provide a
    renamed copy of SAP's LIBRFC that we used at time of binding. This file is
    LIBRFCBCK.
    In the event of a signature violation, the Vertex LIBRFCBCK can be renamed
    in-place to LIBRFC and Translink will find this version of the Service
    Program first. Translink (VERRFC) will always look locally for the file. If
    not found, it will find the one SAP provides in the SAP instance and
    attempt to use it.
    Volker, we use Vertex, issues with ASCII, ECC6.0?

  • Installing software, windows install issue

    Hi,
    I recently taken over my dads laptop but cannot completely wipe it due to no access to some of the software installation discs etc but it means that several things that should have been fairly straight forward are not as easy as you'd think.
    I'm having a problem installing the blackberry desktop software for PC. I can download the file which comes up as 610 b034_multilanguage.exe when i double click it appears to unzip the file it then comes up with the language option to select in Windows Install Shield Wizard, then configuring the windows installer with the Blackberry screen in the background. It then simply comes up with a box ' windows installer' with a scroll box with all sorts of info then only an 'ok' option box. If you select that the box closes and nothing happens. The install hasn't finished (or hasn't started in the first place) it isnt listed in the programs list, and the software is no where to be seen.
    Someone please help!!??

    Hi,
    I recently taken over my dads laptop but cannot completely wipe it due to no access to some of the software installation discs etc but it means that several things that should have been fairly straight forward are not as easy as you'd think.
    I'm having a problem installing the blackberry desktop software for PC. I can download the file which comes up as 610 b034_multilanguage.exe when i double click it appears to unzip the file it then comes up with the language option to select in Windows Install Shield Wizard, then configuring the windows installer with the Blackberry screen in the background. It then simply comes up with a box ' windows installer' with a scroll box with all sorts of info then only an 'ok' option box. If you select that the box closes and nothing happens. The install hasn't finished (or hasn't started in the first place) it isnt listed in the programs list, and the software is no where to be seen.
    Someone please help!!??

  • K9A Platinum Raid Drivers, Windows Install Issue

    I unzipped the "ATI IDE RAID" driver to a floppy, but I can't get the windows install to recognize it.  It just goes to the "Please insert the disk labeled 'Manufacturer-supplied hardware suppor disk' into Drive A: and press ENTER" screen.  I'm not sure what's wrong, as everything is connected, am I doing something wrong making the disk?

    Yeah, I've used two different ones, and they both work fine on the computer I'm writing them with, I was wondering if you had to mess with the files, like put them all in the same folder or somesuch (I've tried that), or if you just unzipped to the diskette (tried that too).  Is there cause to suspect the drive itself at this point?

  • H67A-G43 (B3) - Windows 7 64-bit Install issues with Video Card(s)

    Specs
    Case - CoolerMaster CMP 350 w/500 Watt PSU
    Motherboard - MSI H67A-G43 (B3)
    Processor - Intel i7-2600
    Memory - 16GB (4x4GB) DDR3 1333
    Hard Drive - Western Digital Caviar Green 1TB SATA 2
    Video - *multiple cards tested
    Issue
    OS Installation
    Video Card - ASUS HD 7850 DirectCUII - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
    Video Card - GeForce 9300 GE - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
    Video Card - MSI N430 GT - Computer does not POST.
    Video Card - Integrated - Computer boots and completes install of Windows 7 64-bit. Install all drivers, update BIOS to current version.  Attempt to boot with video cards listed above with new BIOS, same issues. (First two hang on Windows logo, 3rd no POST.)
    Attempted Resolutions
    As stated, I have tried 3 different video cards, as well as 2 motherboards, both of them MSI H67A-G43(B3).
    We have ordered 2 other new motherboards (one ASUS, one Gigabyte) because we need to get this built for the customer ASAP.  However, we have previously used the H67A-G43 boards with no issues.  We would like to be able to use these motherboards on future builds.  What possible solutions are there for these issues?

    Quote from: HU16E on 20-April-12, 03:32:27
    Tried a battery removed CMOS clear and reset after the UEFI/BIOS update? Tested with another PSU? Tried with just one RAM stick in the primary dimm slot, or with just two sticks?
    Results
    1 Stick DDR3 - Freezes in "Starting Windows" screen when video card (HD 7850) installed.  Still works correctly with Integrated.
    1 Stick DDR3 + swapping out CoolerMaster 500 Watt PSU for "Power" 500 Watt PSU - Freezes in "Starting Windows" screen with video card.  Using Integrated video, works correctly.
    This is on an unflashed H67A-G43 (B3) new out of the box.

  • Windows 7 install issue with Snow Leopard

    Hey Guys!
    Just upgraded my Macbook Pro (Unibody Late 2008) to Snow Leopard and did all software updates.  I then partitioned the drive to install Windows.  When installing Windows it would only install if I reformatted the partition I wanted to install it on.  So I did that.  After hours of installing and udating Windows 7 I found that I did not have bootcamp on the bar at the bottom.  I tried to upgrade to BootCamp 3.1 but it says Bootcamp 3.0 is needed and not present.
    How do I install Bootcamp 3.0 from Windows?
    How do I get back to Mac OS?  I have been stuck (ugh!!!) in Windows since Friday...
    I tried to download the pdf file to read about installing Windows 7 but Windows will not install Acrobat Reader  (I really hate windows), fought with it for 1 hour trying to install it.
    anyways thanks in advance for the help
    KK

    Hey Guys
    I eventually solved the Boot Camp Problem but then shortly after that had a different problem crop up. 
    It will not boot my Mac OS, it says the partition is corrupted.  Even if I boot from an install disk, it will not mount the Mac portion of the Hard drive.  Best info I can get on the issue is that part of my B Tree is too large?  Mac Repair utility will not fix it.
    Suggestions?  Even if I cannot use the partition as a bootable drive I would like to get my data from that disk.  Unfortunately I do not seem to have a backup of the data on that drive.
    thanks
    KK

Maybe you are looking for