Post XI component info to New SLD

Hi XI guru,
We just installed another XI Dev instance with new SLD, so we want to redirect perivous installed XI Sandbox to this new SLD. I have use RZ70 and VA to post ABAP stack and Java stack info of XI Sandbox to this new SLD.
But I don't know how to post XI related component info to new SLD, for example:
Adapter engine,Domain, Integration Repository,Integration Directory,Integration Server
as I cann't see XI sandbox component info in Technical system of new SLD( Technical system type).
Thank you very much

THank you for your quick response,
and I have created Business system and techincal system to point to Sandbox.
but when I go to XI Sandbox ID, when I open "Envorioment->Cache Notification",it pops up a message as following:
"Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>"
The looks like we don't have Adapter Engine for Sandbox in new SLD,so that's why I want to know how to post XI related component to new SLD.Thank you

Similar Messages

Error during installation of a new SLD

Hello people,
During installation of a new SLD I got different kind of errors in the Log. Does anyone has a suggestion what to do?
#79 09/10/2007 14:04:01.536 [Thread-74] INFO com.sap.lcr.pers.delta.importing.ImportHandler: Finished full import into namespace sld/active: More...
#78 09/10/2007 14:04:01.528 [Thread-74] INFO com.sap.lcr.pers.jdbc.JdbcPersistence: Deleted namespace: sld/import/temp0 (Duration: 46 ms)
#24 09/10/2007 13:34:57.879 [Thread-74] INFO com.sap.lcr.pers.delta.importing.ObjectLoader: The following errors occurred during the import: More...
#23 09/10/2007 13:34:23.46 [Thread-74] INFO com.sap.lcr.pers.delta.importing.ObjectLoader: The following errors occurred during the import: More...
#22 09/10/2007 13:33:46.802 [Thread-74] INFO com.sap.lcr.pers.delta.importing.ObjectLoader: The following errors occurred during the import: More...
#21 09/10/2007 13:33:15.571 [Thread-74] INFO com.sap.lcr.pers.delta.importing.ObjectLoader: The following errors occurred during the import: More...
#20 09/10/2007 13:32:49.979 [Thread-74] INFO com.sap.lcr.pers.delta.importing.ObjectLoader: The following errors occurred during the import: More...
#19 09/10/2007 13:32:20.687 [Thread-74] INFO com.sap.lcr.pers.delta.importing.ObjectLoader: The following errors occurred during the import: More...
#18 09/10/2007 13:31:50.255 [Thread-74] INFO com.sap.lcr.pers.delta.importing.ObjectLoader: The following errors occurred during the import: More...
#17 09/10/2007 13:31:26.370 [Thread-74] INFO com.sap.lcr.pers.delta.importing.ObjectLoader: The following errors occurred during the import: More...
#16 09/10/2007 13:30:58.647 [Thread-74] INFO com.sap.lcr.pers.delta.importing.ObjectLoader: The following errors occurred during the import: More...
#15 09/10/2007 13:30:28.281 [Thread-74] INFO com.sap.lcr.pers.delta.importing.ObjectLoader: The following errors occurred during the import: More...
#14 09/10/2007 13:15:05.378 [Thread-74] INFO com.sap.lcr.pers.jdbc.JdbcPersistence: Deleted namespace: sld/import/temp0 (Duration: 113 ms)
#13 09/10/2007 12:55:39.244 [SAPEngine_Application_Thread[impl:3]_27] INFO com.sap.lcr.pers.jdbc.JdbcPersistence: Deleted namespace: sld/import/temp0 (Duration: 40 ms)
#12 09/10/2007 12:54:35.280 [SAPEngine_Application_Thread[impl:3]_17] WARNING com.sap.lcr.jsp.importWarning: The following warning has been reported by import precondition checks, user decision required: More...
#11 09/10/2007 12:54:35.270 [SAPEngine_Application_Thread[impl:3]_17] INFO com.sap.lcr.pers.jdbc.JdbcPersistence: Deleted namespace: sld/import/temp0 (Duration: 39 ms)
#10 09/10/2007 12:48:12.210 [Thread-72] INFO com.sap.lcr.pers.delta.importing.ImportHandler: Finished full import into namespace sld/active: More...
#9 09/10/2007 12:48:12.189 [Thread-72] INFO com.sap.lcr.pers.jdbc.JdbcPersistence: Deleted namespace: sld/import/temp0 (Duration: 46 ms)
#8 09/10/2007 12:19:40.871 [Thread-72] INFO com.sap.lcr.pers.jdbc.JdbcPersistence: Deleted namespace: sld/import/temp0 (Duration: 89 ms)
#7 09/10/2007 12:19:29.549 [SAPEngine_Application_Thread[impl:3]_37] WARNING com.sap.lcr.jsp.importWarning: The following warning has been reported by import precondition checks, user decision required: More...
#6 09/10/2007 12:19:29.400 [SAPEngine_Application_Thread[impl:3]_37] INFO com.sap.lcr.pers.jdbc.JdbcPersistence: Deleted namespace: sld/import/temp0 (Duration: 377 ms)
#5 09/10/2007 12:17:44.796 [SAPEngine_Application_Thread[impl:3]_17] WARNING com.sap.lcr.jsp.importWarning: The following warning has been reported by import precondition checks, user decision required: More...
#4 09/10/2007 12:17:44.698 [SAPEngine_Application_Thread[impl:3]_17] INFO com.sap.lcr.pers.jdbc.JdbcPersistence: Deleted namespace: sld/import/temp0 (Duration: 1,929 ms)
#3 09/10/2007 12:14:48.156 [SAPEngine_Application_Thread[impl:3]_0] INFO com.sap.sld.api.builder.app.DefineHostedSystem: JDI system SLD jct11 on T11 on dbt11-se written to SLD at jct11:53300.
#2 09/10/2007 12:14:47.392 [SAPEngine_Application_Thread[impl:3]_0] INFO com.sap.lcr.start.StartDirector: SLD application started successfully.
#1 09/10/2007 12:14:35.244 [SAPEngine_Application_Thread[impl:3]_25] INFO com.sap.lcr.start.StartDirector: SLD application stopped successfully.
#0 09/10/2007 08:41:05.852 [SAPEngine_Application_Thread[impl:3]_6] INFO com.sap.lcr.start.StartDirector: SLD application started successfully.
Kind regards,
Kamran
Message was edited by:
Kamran Vakili

Adding more mystery to the distribution kit error discussed above. I have found that the kit installs successfully on Win 7 x64 machines as well as WinXp x32 machines. However, the installation error message still exists on Win 7 x32 machines. On one of these Win 7 x32 machines the error message infers that there is a .dll file that cannot be found, with no mention or hint as to the file's name. Again, any tips would be appreciated.

[svn:fx-trunk] 12025: Switching out the old video component for the new video component that uses OSMF .

Revision: 12025
Revision: 12025
Author:   [email protected]
Date:     2009-11-19 17:48:04 -0800 (Thu, 19 Nov 2009)
Log Message:
Switching out the old video component for the new video component that uses OSMF. Also fixing RSL issue with OSMF because a change in flex-config.xml accidentally got overwritten. Also fixing a bug caught during the last code review where you would set the volume on the VideoPlayer, but the volumeBar wouldn't be made aware of that change.
Switching out the video component results in many API changes. The changes are highlighted below:
Class name changes:
- spark.primitives.VideoElement is being renamed to spark.components.VideoDisplay
- spark.components.mediaClasses.StreamingVideoSource is renamed to park.components.mediaClasses.DynamicStreamingVideoSource
- spark.components.mediaClasses.StreamItem is renamed to park.components.mediaClasses.DynamicStreamingVideoItem
VideoDisplay/VideoPlayer event changes:
The new video component's events are:
- bytesLoadedChange : org.osmf.events.LoadEvent
- currentTimeChange : org.osmf.events.TimeEvent
- durationChange : org.osmf.events.TimeEvent
- mediaPlayerStateChange : org.osmf.events.MediaPlayerStateChangeEvent
The old video component's events were:
- close : spark.events.VideoEvent (removed)
- complete : spark.events.VideoEvent (replaced with mediaPlayerStateChange)
- metaDataReceived : spark.events.VideoEvent (replaced with mediaPlayerStateChange)
- playheadUpdate : spark.events.VideoEvent (replaced with currentTimeChange)
- progress : flash.events.ProgressEvent (replaced with bytesLoadedChange)
- ready : spark.events.VideoEvent (replaced with mediaPlayerStateChange)
VideoDisplay/VideoPlayer property changes:
Renames:
- maintainAspectRatio:Boolean has been renamed to scaleMode:String and rather than true/false, it now access 4 values: none, zoom, letterbox, and stretch. See the enum class org.osmf.display.ScaleMode.
- playheadTime:Number has been renamed to currentTime:Number
- playWhenHidden has been renamed to pauseWhenHidden, and it's "tense" has been reversed. So playWhenHidden = true correlates to pauseWhenHidden = false. Also, before we would only pause when the video component was explcitly set to visible=false, but now we detect if the video components or any of it's ancestors have been hidden.
- totalTime:Number has been renamed to duration:Number
New properties:
- bytesLoaded:Number This is a new property not available on the old video component
- bytesTotal:Number This is a new property not available on the old video component
- loop: Boolean this was a property added a while ago on the old video component but not in the original video player spec
- mediaPlayerState: this is a new property that details the state of the video component. See org.osmf.media.MediaPlayerState for all the possible values.
- seekToFirstFrame:Boolean (pending PARB approval) - This is a new property available on VideoDisplay/VideoPlayer. When autoPlay = false, if seekToFirstFrame is set to true, then we will connect to the server to start downloading the video, figure out the size of the video and resize appropriately, and show the first frame of the video. If seekToFirstFrame is false, then no connection to the server is made, there's no implicit size for this video, and the first frame will not be show automatically. By default the value of this property is true. In the old video component, when autoPlay = false, we always has the same behavior as seekToFirstFrame = true. Now it is controllable through this property. Eventually, (not for Flex 4.0), we will most-likely have support for a thumbnail source or a splash screen so the video's preview will show up without making an unneeded connection to the server. The property name may change depending on PARB.
Other changes:
- autoRewind: The default of autoRewind is now true instead of false
- enabled: before we paused the video when the video component was explicitly set to enabled = false. Now we pause the video when the video component or any of it's ancestors have been disabled.
VideoPlayer-only changes:
- videoObject:flash.media.Video property is now a new property on VideoPlayer. It was previously only on VideoDisplay.
- The skin states for the old VideoPlayer were: connectionError, disabled, disconnected, loading, playing, stopped, connectionErrorAndFullScreen, disabledAndFullScreen, disconnectedAndFullScreen, loadingAndFullScreen, playingAndFullScreen, stoppedAndFullScreen. The new skin states are: uninitialized, loading, ready, playing, paused, buffering, playbackError, disabled, uninitializedAndFullScreen, loadingAndFullScreen, readyAndFullScreen, playingAndFullScreen, pausedAndFullScreen, bufferingAndFullScreen, playbackErrorAndFullScreen, disabledAndFullScreen
DynamicStreamingVideoItem property changes:
- bitRate:Number renamed to bitrate:Number
DynamicStreamingVideoSource property changes:
- initialIndex has been added to DynamicSteramingVideoSource
- live:Boolean has changed to streamType:String which accepts values: live, recorded, any. See the enum class org.osmf.net.StreamType for more info.
- serverURI:String renamed to host:Object
- streamItems:Array has changed types to streamItems:Vector.
ScrubBar property changes (THESE CHANGES ARE NOT DONE YET, BUT SHOULD BE DONE SOON)
- bufferedStart will be removed
- bufferedEnd will be renamed to loadedRangeEnd. This property name still may change depending on PARB.
- bufferedArea skin part needs to be renamed. Probably will be renamed to loadedArea. PARB still deciding.
QE notes: -
Doc notes: -
Bugs: -
Reviewer: Kevin
Tests run: checkintests
Is noteworthy for integration: Yes
Modified Paths:
    flex/sdk/trunk/frameworks/flex-config.xml
    flex/sdk/trunk/frameworks/projects/spark/defaults.css
    flex/sdk/trunk/frameworks/projects/spark/src/SparkClasses.as
    flex/sdk/trunk/frameworks/projects/wireframe/build.xml
    flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/VideoPlayerSkin.mx ml
    flex/sdk/trunk/frameworks/spark-manifest.xml
Added Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/VideoPlayerSkin.mxml
Removed Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer2.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/mediaClasses/StreamItem.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/mediaClasses/StreamingVideo Source.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.png
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/VideoPlayerSkin.mxml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/VideoPlayerSkin2.mxml

I've got that same problem: iPod Touch 2nd Gen, Apple Component Cables, and an HD TV.
The funny thing is, the cable works fine with an iPod Classic (160 GB) but not for the iPod Touch. Can anyone explain why that is?

Updating the SAP Component Repository in the SLD

Hi All,
Can I get someone to clarify note 669669 - Updating the SAP Component Repository in the SLD for me?
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D36363936363926
Currently, I am on version:
My Solution Manager is telling me:
I don't see a newer version. Am I reading this incorrectly?
Thanks,
Diana

The problem is with the CR Content version which is on 9.0 patch level and I see patch levels 12 and 13 available on SMP
Check this article and update the CR Content
http://scn.sap.com/docs/DOC-41516
Regards
RB

Transfer old Apple ID purchase info to New Apple ID for iCloud purposes

Transfer old Apple ID purchase info to New Apple ID for iCloud purposes
I currently have an apple ID that i have used for many years of ABC. This will hold all the apps and songs etc that i have purchased over the years. So i can currently download apps from app store using the new "purchased option" from the "Cloud".
I have just set up and wish to make a new account my main account for iCloud and all purchases. This is XYZ . How do i get all the purchase history and account actions from ABC apple id, to map across to the new XYZ apple id.
My objective is to log into my iphone on itunes, app store and icloud using the new XYZ apple id, but still be able to view and download any and all previous purchases held against the ABC apple id.
Can I/Apple port this account over so all history of purchases on ABC apple id, is now held against the new XYZ apple id.
Thanks

RE all those that say it cannot be done or why do i want to or need to...
When my phone (on iOS 5) had the old/main apple ID logged in and used, the iCloud page where you can enable iCloud for apps, mail, notes etc - it would not allow me to turn on mail or notes for iCloud. Said i needed to create an iCloud/Mobileme address to use these features.
When i created new mobile/iCloud account today it worked fine for all iCloud options on my iPhone. Also, the emailed address for mobileme/icloud was more to my needs/liking.
The new mobileme/icloud ID created today cannot have my main email address added to it as it says my current/main apple id is that email address.
Any suggestions?

Opening a new component/view in new window

Hi there,
I'm sure this question has been asked before, but I can't find it for some reason. I am trying to open a component in a new window using a link. Even opening a different view in a new window would be suffice.
I however read somewhere that some of the past features of "createWindow" only open the new view/component as a Modal.
Please Help.

Michael,
What are you able to do is 2 options only:
1. Open a separate browser window with new WD application / arbitrary url.
2. Open so-called pop-over in same browser window. Well, it is not "pure" window, but it walks & quacks alike
For second option you can use smth. like this:
final IWDWindow window = wdComponentAPI.getWindowManager().createWindow
wdComponentAPI.getComponentInfo().findInWindows("MyWindow"),
true
The latest parameter is "isModal" flag. As of sneak preview it is always should be modal (true).
I'm working with SP6 and it seems to be possible to define this parameter as false, and resulting window really modal-less (I can click on elements outside pop-over).
Regards,
VS

Why can't I post a question from my new system?

Hello All:
I was just trying to post a question from my new mbp but it wouldn't allow me to do anything. It continually gave me a message highlighted in 'red' that i was;t allowed to modify or post anything. I've been asking questions for quite a while and have never seen this. I also happen to have my older bmp, also logged onto the 'Apple Discussions' site, open beside me. Can anyone explain this to me please? BTW, my new system obviously has Yosemite on it while my older bmp has Lion. Thanks in advance, to all those who respond.
Regards,
Ciaochiao

ChitlinsCC, I'm adding your reloaders to my article on how to make using ASC easier.
Here is my ASC work flow...
1) I login.
2) Block the automatic 30 minute logout.
     Unless you do something every thirty minutes you get logged out. The forum software waits to tell you this as long as it can to keep you in suspense ;-) . Filling out a reply is the exception to the thirty minute window.
        Start an auto reloader.
Safari = SafariTabReloader
Firefox = ReloadEvery: "Reload web pages automatically"
Others = Reloaders | Cerberus - Support Center
You need to pick a page that will reload over time without stalling out. It's ASC. I've found my profile display the best to use. I get my Profile page after some logins. It's ASC. Change rccharles to your apple id.
https://discussions.apple.com/people/rccharles?view=discussions
Reply technique
Open a new browser window. Pick some discussion. Open a reply window. As long as this reply window is open, you will stay logged in. The 30 minute times is reset as needed by the ASC software.
3) I open another window to do my normal ASC browsing.
4) I have a FireFox bookmark to goto the discussions that I have participated in. I've modified it to add on the content stuff.
         turingtest2 recommends. Change rccharles to your apple id:
https://discussions.apple.com/people/rccharles/content?filterID=participated~obj ecttype~objecttype%5Bthread%5D
5) Use turingtest2's generated links with the /content suffix as browser bookmark to the ASC discussions:
Site map of Communities and Categories
https://discussions.apple.com/docs/DOC-2463
6) Adjust the ASC web page layout.
For FireFox
I run with Hiroto's modification to user content. This is the only way these forums are readable for me. How to adjust the format and layout of ASC Web Pages:
https://discussions.apple.com/docs/DOC-7501
For Safari
"ASCPowerTools is a Safari Extension designed to give more control"
http://www.etresoft.com/ascpowertools
7) Read and answer my old posts. I kind of memorize the time I last posted. ( It's way bad that apple eliminated the last poster to a thread. )
8) I use tabbed browsering. From a list of discussions, hold down the command key then click on the link. You get two tabs this way. The original window will keep where you have been.

Error in posting when transfer to a new personnel area / company code

Dear Experts,
We have a scenario where we have a transfer action for some of employees to a new personnel area (also new company code). When we post the result to accounting, we have an error like this : "Company code clearing account not found in co. code A for co. code B". I can see that the program is trying to post to both old and new company codes. I know that it might be a missing configuration in FI sides, but is it normal to post to both company codes. Logically it should post only to the new company code right ? Unless of course there is a retro run from the old company, but there isn't.
Please advise.
Thanks and regards,
Arief

Ask ur controlling person reagarding this how he want to get
because generally there shd be two GL here for this scenario which is assigned to two company code
ask them how they have configured

System Copy XI 3.0 - do I need a new SLD?

I am planning to refresh my Sandpit XI system from my Development environment on XI 3.0, WAS 6.40, NW04. I have the system copy guide version 1.1 which states that I need to migrate to a new SLD. At present, I have one SLD for my Sandpit / Dev /QA environments and a second for Prd.
The documentation explicitly states that I have to migrate to a new SLD, but I don't really want to have to maintain another one. Has anyone experience of this? And do I really need to create a new SLD for this.?
Thanks in advance.
Graham

Graham,
If your present Sandpit and Dev SLD's are same and you are trying to refresh sandpit with Dev, in this case it is not required to create new SLD.
Regards,
Ranjeeth.

API for component info

Hi,
we're looking for a way to get the version string or the service pack level of the NetWeaver and/or the enterprise portal.
There is this "component info web page" when you retrieve http://<nw-host>/sap/monitoring/ComponentInfo.
We're searching for a Java API to this kind of information.
Btw, what we do know is that one can get a "version string" through http://java.sun.com/products/servlet/2.3/javadoc/javax/servlet/ServletContext.html#getServerInfo(), but we want to get detailed and drilled down information like in the component info page.
Cheers,
Oliver

Hi Oliver,
http://<host>:<port>/monitoring/ComponentInfoServlet
or
http://<host>:<port>/sap/monitoring/ComponentInfoServlet
retrieves the component info in XLM format. (I do not know as of which release you can use this servlet.)
Kind regards
Frank

Unable to post FR50 (Original Budget) for New Fund Center

Dear All,
We are in ECC6.0 and using Former Budgeting, Our business team created a new fund center and assigned it to cost center in the derivation rule.
Before they granted original budget using FR50, the business users started posting various invoices, expenses, POs, PRs against the cost center accordingly the Available Budget became Negative.
Now they are trying to post Original Budget for the new fundcenter using FR50, however system gives an error saying Payment Budget exceeded.
Please advice how to grant budget in such situations, we had an alternative to reverse all commitments and actuals posted against the fundcenter and grant budget, this worked in our test environment. However in Production we will not be able to do this due to too much volume already posted.
Is there a way to fix this, note that Availability control is active and not sure why system allowed to post without budget.
Any pointers, is this how standard SAP behaves or are we missing something.
We have also checked on master data elements of commitment item/fundcenter.. everythign looks fine.
request your inputs.
regards
Diwakar

Hi,
I believe you are using Former Budgeting. Please check below if this is not the cause for your issue:
Please check the following customizing that you have done in your system:
SPRO -> Public Sector Management -> Funds Management Government -> Former Budgeting -> Availability Control -> Define Parameters for Availability Control
See if you have set the flag: Check on lowest budget object with budget in your customizing.
Please check the documentation about this flag, specially this part:
"If you do not set the indicator, availability control runs against the first budget object, even if it has received NO BUDGET. This is the setting in the system as delivered."
You can check also report BPINDAN2_NEW.
This means that the budget is going to be checked in the first object with budget in your budget hierarchy.
If this is your case, you have only two options:
1.- Remove the negative budget you have in the combination of funds center/commitment item.
2.- Add the Combination funds center/commitment item to the exemption list of AVC.
I will prefer that you do the first option, as for me sounds strange to have negative budget, but this is one decision that you need to discuss it internally in your company.
If you choose any of the 2 options above, please do not forget to reconstruct your budget and assigned values AFTER you have done one of the options above, with the following transactions (in this order):
1.- Run transaction FMBV in order to reconstruct Budget values.
2.- Run report RFFMRC04 in Test mode in order to check if there is still some inconsistency.
3.- If RFFMRC04 shows inconsistencies, then run this report in Update Mode.
4.- Reconstruct distributed values with transaction FM9P
5.- Reconstruct Total values with transaction FM9Q
6.- Reconstruct assigned values with FMBV again.
I hope this helps.
Best Regards,
Vanessa.

BEX F4 help values from posted values in Info Provider not from Master data

We have an info object called Archival purpose and it is display attribute of Master data info object Archive Number. Both Info objects are used in a cube. Posted values in cube have only two value for info object Archival purose which is "EXCOM" and "EA".
But when we do the F4 in the bex query, we see some other F4 values. Although Master data is having other entries but we have defined in the bex property of both the info object to read the f4 value from the posted values in the info provioder.
Please suggest how to get values in bex F4 help only from posted values in info provider and not from the master data.
Thanks

Hi,
You don't need to change the Infoobject definition as it will become global and it will be applicable for whereever this infoobject is used. Instead you can manage this setting for this particular Infoprovider.
Go to RSA1 and double click on your infoprovider used for this query, go to change mode. From the right hand side dimension tree search for the Infoobject for which you want to maintain this property. If it is navigation attribute then you can search it in navigation attribute tree.
Once you find the infoobject right click and from context menu choose the first option "InfoObject specific properties". In the next popup in the last option about F4 values for filter you can select the option, "Only values from Infoprovider".
Regards,
Durgesh.

How do I select features (e.g. news, investment info, sports news etc.) to the Firefox home page. It currently only contains a google search box ?

My Firefox homepage currently only contains a Google search box. How do I select features (e.g. news, investment info, sports news etc) to the Firefox home page.

The current build-in Firefox home page about:home doesn't have such extra features. If you need those then change the home page to http://wwww.google.com
* [[How to set the home page]]

Having no luck backing up my iphone 4 on itunes so that I can restore all my info on new iphone 6 . help!!!

trying to backup my iphone 4 ios 7.0 4 Gb to iTunes with no luck. then want to restore info to new iphone 6 64 Gb. what do I do?

What happens when you try to backup via iTunes?

HT1414 how do i restore old iphone 4s info to new iphone 4s

how do i restore old info on new iphone 4s

create a backup of your old phone either in itunes or icloud
then, get your new phone and restore from that backup. If it's restoring from an itunes backup, you'll need to plug it into that computer
if you're restoring the new 4s from an icloud backup, you can only do it from the setup process of the new phone

Post XI component info to New SLD

Similar Messages

Maybe you are looking for