"Postal code does not exist" - bypass error message in CREMAS

Hi.
I am on a client implementing ALE between HR+Travel and FI/CO.
Vendors are created in HR and send to FI/CO with the IDoc CREMAS.
They don't want to validate the Postal Codes and Cities in the Vendors' Master Data.
But the IDoc ends with the status 51 and the message:
R5(510): "Postal code &1 in country &2 does not exist".
Do you know a way to bypass the validation in this Inbound Idoc in FI/CO?
Is it possible to customize this message to be a warning instead of an error in the IDoc, like it is on the manual entry screen?
Thank you for your help.
Edited by: MDuarte on Jan 9, 2012 11:32 AM

Hi there
I did some checks on this error and in fact found some support issues fixed in BC-SRV-ADR component (but for transaction XK01 directly) however for tcode PRAA there are some additional BADi's and user exits you can check in note 570023 - User exits for the generation of vendors with RPRAPA00, If the address editing in the vendor master record does not suit
your requirements, it can also be changed. For this purpose you have the user exit routine 'set_address_by_user'.
However specifically in XK01, this was alleviated by removing the flag CITY FILE ACTIVE for the relevant country.
If CITY FILE ACTIVE is disabled, it will disable regional structure checks, similarly POSTAL CODE CHECK will disable postal code checks. (See the F1 help)

Similar Messages

IDoc error - Condition type & tax code & does not exist

Hi,
I have the problem with CANADA tax codes. I have a few documents sent from external SAP to different SAP. In the source system documents were posted. In the target system i have error "Condition type & tax code & does not exist". I have compared the tables A003 and A053 in both systems and the settings are the same for specific Condition type and tax code... So where to find the reason Idocs are in error ? The only thing which is different is validity from (in the source system is earlier than in the target but the docs are created after both validation start)...
I would appreciate advice.
Tomek

Hi Tomasz,
Please go to T.code WE02 and check the reason for the error.
The failed IDocs will be in status "51" and will also give you the reason for errors.
Regards,
Shiv

Company code does not exist error while sending idoc

Hi Expert
I am trying to send idoc from one client(800) to another client(810).I have faced error Company code does not exist, searched scn ,Got solution if company code does not exist in reciever system(810 client) ,it will show this error .Then i have tried to give specific company code which is exist in 810 client also .But same issue is coming . So what exactly the issue can any one say .
More Info:FI(Finance) header items and line items are sending .
Thanks & Regards

Hi,
Your company code not activated for material management. Few pre-requisites to create material and one is to activate company code for material management
Please activate in T.code: OMSY,
[For example: For Fiscal year variant K4]
In OMSY steps, u have to enteru2026u2026u2026..
Company Code (enter your company code name 2001)u2026u2026u2026u2026u2026.
Company Name..
Fiscal Year of Current Period 2009
Current period (posting period) 03( )
Fiscal year of previous period 2008( will come automatic)
Month of previous period 02( will come automatic)
Fiscal year of last period of previous year 2008
Last month of previous year 12
Allow Posting to Previous Period (Back posting)
Disallow back posting after a change of period
Now create material with T.code; MM01
Regards,
Biju K

UD - Selected set code does not exist

Dear All,
We have create material in 0001 plant. It is consumable material and QA is not required. But by mistake Inspection flag was activited in material master.
Now material received is in QA Stock. We have created inspection plan and not inspection lot is in REL status.
During UD system shows following message :
"Selected set code does not exist, or data entered is incomplete"
Is there any way to take stock in unrestricted without doing any QA activity ?
Thanks and Regards,
Nirav

Hi,
Why don't you simply complete the Stock posting using 'Inspection lot stock' tab in QA32?
If you only need to take the stock out of QI and doesn't need Usage decision then why do bother about it.
Besides, this error comes when the UD selected set defined in Configuration is not maintained for the Plant.
To check this, Follow this path,
QCC0> Quality inspection> Maintain inspection type. Select the Relative inspection type and see what is maintained.
Once you maintain this Selected set for the plant 0001 using QS51, you won't get this error. Other way, define that selected set in the configuration which is already maintained for the plant.
ntn

Cross system company code does not exist.

Hello,
I am trying to upload Cost center through IDOC menthod.
Message type of IDOC is : COSMAS
Basic Type : COSMAS01
But i am getting a error as Cross system company code does not exist in ( Create IDOC Overview).
Kinly help me in resolving this issue.
Regards,
Hemanth.
Edited by: hemanth kumar on Feb 20, 2009 3:08 PM

Hi Shweta
Have you checked with the data i.e. company code .
May the company code which you are passing is not there in ur receiver system.
Just check it out.
Regards
-Mitesh

Condition type & tax code & does not exist

Hi,
I have a problem to find out the reason why i can not process documents which came via IDocs from Sales SAP system. The error is "Condition type & tax code & does not exist". Following places i have already checked :
1. FTXP - tax code for which error exists the same in both systems
2. Table A053 - Condition types for specific tax codes and country are created in both systems.
The tax determination is under billing and in Sales system it is ok, document is posted and when comes to our FInance system via Idoc it is in error even we have the same entries in the table A053.
Maybe someone knows what can be also checked ?
Thanks
Tomek

Hi Tomasz,
Please go to T.code WE02 and check the reason for the error.
The failed IDocs will be in status "51" and will also give you the reason for errors.
Regards,
Shiv

The material code does not exist or is not activated

Dear All,
I am using SAP ECC6. When I go through MM03 for certain material code, it gives the error: The material code does not exist or is not activated.
But this code exists in MARA. There seems to be no problem in the fields of MARA.
Where the problem can be?
Regds
Amit

do you know when and how the material was created?
Maybe the material is stored with a key that does not anymore fit to the customizing.
In SE16 in menu Settings > user parameter check if you have a flag in field conversion exit., if yes, then remove it and display this material along with other materials that you can access with MM03 in one list.
Check if the material number is different from the others (e.g. with or without leading zeros)

Tax Code does not exist in the system (T007A)

Hi All
When we try to create a receipt for a particular expense type in ESS Travel & Expenses, we get the follwing error "Tax code Z0 does not exist in the system (T007A)". Upon creating a tax code Z0 it gives the following error "Tax code does not exist in the system (T007A)". When we change the Receipt currency to USD instead of Bristish Pound it gets accepted without the error. It works perfectly fine when expense report created using GUI. The error occurs only when we create the expense report using Portal ESS T&E. I was not able to find anything related to this in the SDN. If any of you could help me out, that would be great.
Thanks, Raj

Hello Mr. Raj!
I checked the related issues that other customers reported.
I came up with a list of things you can try that may help you solve your issue.
a) Check if the field V_706D_B-LAND1 is filled with the home country in the IMG step 'Define Global Settings'. So may I ask you to check. Moreover, if this is not the reason, may I also ask you, if you get the same error when using our backend test transaction PR_WEB_1200? Thank you,
b) Could you please check that you don't have any expense type with value " "(blank) in the tax code field in V_T706B1?
c) Apply Note 1129853 - Web: Input tax code for credit card receipts
d) Please follow in IMG:
Financial Accounting
Travel Management
Travel Expenses
   Master Data
    Control Parameters for Travel Expenses
     Define Global Settings
Input Tax
Country                                       { Your country here }
Enter an input tax code for 0% input tax [    ] <<<
If here it's blank, this must be filled with a tax code. I found this out when I set the field "Input Tax per Travel Expense" then I get a warning "Enter an input tax code for 0% input tax".
The reason for this is that in your system, you don't have a "blank" tax code and it looks for this entry. Please kindly define a tax code in this setting.
I hope I was able to help you with this information.
Wilian Segatto
SAP Support - HCM/XSS

Msg FF 718 Tax code & does not exist for jurisdiction code

Hi,
I am trying post a goods issue for a Return Delivery PO.
After entry the data, I made the consistency check and then the system show me the related message: Msg FF 718 Tax code & does not exist for jurisdiction code.
I checked the configuration about Tax on Sales/Purchases, but I did not see nothing wrong.
Anybody knows how about this message?
Thanks in advance.

Hi Demetrio,
Please refer the below mentioned OSS notes:
Note 675382 - ME31K No check on tax jurisdiction code in contract
Note 765309 - Check combination MWSKZ/TXJCD incorrect
Hope this helps,
Please assign points as way to say thanks

Tax code does not exist for jurisdiction code sap

Dear All,
I have gone through all these links and many more
Tax code does not exist for jurisdiction code
Tax code not maintained for Juridiction code
Tax code O1 does not exist for jurisdiction code CNT5K2L60
Tax code EA does not exist for jurisdiction code QC000000
This has ben discussed many times. I have searched the forums as well. But still I am not able to solve this.
If i use the tax code V0 the system is accepting. But if i create any other tax code in tax jurisdiction IN00 and TAXINJ
it gives the error.I tried OBCL also as told by experts.But still I am not able to solve. Kindly help.
Requesting the moderators not to lock the thread just because it has been discussed. I will close the thread once i solve the issue. My last thread was locked even though it was not asnwered.

scm.sd wrote:
Dear All,
>
> I have gone through all these links and many more
> Tax code does not exist for jurisdiction code
> Tax code not maintained for Juridiction code
> Tax code O1 does not exist for jurisdiction code CNT5K2L60
> Tax code EA does not exist for jurisdiction code QC000000
>
> This has ben discussed many times. I have searched the forums as well. But still I am not able to solve this.
> If i use the tax code V0 the system is accepting. But if i create any other tax code in tax jurisdiction IN00 and TAXINJ
> it gives the error.I tried OBCL also as told by experts.But still I am not able to solve. Kindly help.
>
> Requesting the moderators not to lock the thread just because it has been discussed. I will close the thread once i solve the issue. My last thread was locked even though it was not asnwered.
HI,
can you tell me which tax code and condtion type you are using.
why you are using tax jurisdiction in your tax procedure
thanking you.
Edited by: R.Rasumalla on Oct 13, 2011 3:56 PM

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1

Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Tax code does not exists in TAXINN

While doing FB60 and FB70 message shows Tax code does not exists in TAXINN. Since Tax code A0 and V0 are already assigned to company code and also maintained condition type, tax procedure, and condition record.
Regards,

First check the tax procedure assigned to country IN using T code OY01 - most likely it is TAXINN in your case. Then make sure that you have defined those tax codes in FTXP in country IN. The assignment of A0 and V0 you have done to the company code is just for default tax code in case system doesn't find any tax code for posting.

ORA-27101: shared memory realm does not exist Linux Error: 2: No such file

hello i have a 10 Database R1 installed on Redhat linux AS 4.
i'm having a problem connecting to my database, whenever i try to connect i get the error
ORA-01034: Oracle not available.
ORA-27101 shared memory realm does not exist
Linux Error: 2: No such file or directory.
i checked my startup.log and i found the following after issuing a dbstart.
ORACLE instance started.
Total System Global Area 130023424 bytes
Fixed Size          1218100 bytes
Variable Size          109054412 bytes
Database Buffers     16777216 bytes
Redo Buffers          2973696 bytes
Database mounted.
ORA-01092: ORACLE instance terminated
on dbshut i get the same error message in the shutdown.log
ORA-01034: Oracle not available.
ORA-27101 shared memory realm does not exist
Linux Error: 2: No such file or directory.
my alert_ASYDB.log file has the following
ORA-01534: rollback segment 'R01' doesn't exist
Tue Feb 27 23:14:19 2007
Error 1534 happened during db open, shutting down database
USER: terminating instance due to error 1534
Instance terminated by USER, pid = 3272
ORA-1092 signalled during: ALTER DATABASE OPEN...
in the database creation log, i noticed that this segment could not be created.
i can mount the databse but cannot open it
is there anyway to recreate these segments or any other solution for that?
i have tried to comment the line in initASYDB.ora but dd not work.
regards

Hi,
>>do you recommend using auto undo_management instead of RBS?
Yes. To simplify management of rollback segments, the Oracle9i database introduced Automatic Undo Management (AUM) where the database automatically manages allocation and management of undo (rollback) space among various active sessions. In a database using AUM, all transactions share a single undo tablespace. Any executing transaction can consume free space in this tablespace. Undo space is dynamically transferred from committed transactions to executing transactions in the event of space scarcity in the undo tablespace..The AUM feature also provides a way for administrators to exert control on undo retention. You can specify the amount of undo to be retained in terms of wall clock time (number of seconds). With retention control, you can configure your systems to allow long running queries to execute successfully without encountering ORA-1555 (Snapshot too old) errors ...
For more information, you can take a look on these links below:
http://www.oracle.com/technology/obe/obe10gdb/manage/undoadv/undoadv.htm
http://www.oracle-base.com/articles/9i/AutomaticUndoManagement.php
Cheers

PS Elements 11 says Redemption Code does not exist

Just bought and have activated receipt. Install says Redemption Code does not exist.

See if this FAQ helps you:
http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html

Just purchased adope premiere elements 11 and redemption code does not exist

just purchased premiere elements 11 and when trying to get serial number, i am told the redemption code does not exist, its brand new right out of the package. WHY.

Did you try entering the redemption code at http://www.adobe.com/go/getserial/? You can find additional details at Serial number retrieval process FAQ | Point-of-sale activation products - http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html.

"Postal code does not exist" - bypass error message in CREMAS

Similar Messages

Maybe you are looking for