Postal codes and Length for country

Dear Friends,
can anyone please tell me where i can check the length of postal codes defined for Each country in SAP CRM and in SAP R/3?
thanks in advance!
Best regards,
Dinesh.

Hi Dinesh,
You can check the postal code settings in the following path in SPRO in CRM.
SAP Web Application Server>General Settings>Set Countries-->Set Country-Specific Checks.
Here u can select the country u want and go to details to see the length of Postal code.
Hope it helps,
Regards,
PePe.

Similar Messages

Clearing the the street,Postal code and city in partner tab at sales order

Hi Experts,
I have a requirement like in sales order header or Item, In partners tab, when they are selecting the particular partner function like CR and the customer number is 500, and if they press enter then automaticaly it fetches the name,street,postal code and city at the right side for that entry. My requirement is like for particular customer 700, they want to hide the customer address in that Partner tab while sales order creation VA01. If they select the partner function CR and customer 700, after pressing enter, it shouldn't fetch the automatic address of that customer. They just want the customer name and remaining fields like street,postal code,city should be blank.
Can you please let me know how to reach this requirement ate sales order creation or change level in partner function tab.
I test these exits EXIT_SAPLV09A_001 to EXIT_SAPLV09A_004 but no use. Let me know possible ways to achieve this?
Any idea on these?
Thanks in advance ,
Edited by: dolly B on Jan 18, 2010 11:36 AM

Hi,
This is happening because you have not maintained your data in sales order.
Billing document takes the reference of order and delivery document for taking the data.
Now if you donu2019t maintain your partner function in order nor in delivery then it wont be determine in billing document.
If you want ZZ to shown in billing document then you have to make that function visible in sales order.
While creating sales order it will take it from customer master data but when you are creating billing it wont search in customer master data it will search in sales order only.
You can do one thing make that function non modifiable in partner determination procedure.
So it cant be change in sales order.
But I want to know why you want that should not be visible in sales order.
Hope so I will be correct with my explanation.
Regards
Raj.

How to use same Data Type and Length for two fields

How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
FROM bsik
INTO TABLE it_bsik
WHERE bukrs = p_bukrs
AND lifnr IN s_lifnr.
IF it_bsik IS NOT INITIAL.
SELECT belnr gjahr awkey awtyp
FROM bkpf
INTO TABLE it_bkpf
FOR ALL ENTRIES IN it_bsik
WHERE belnr = it_bsik-belnr
AND gjahr = it_bsik-gjahr.
IF it_bkpf IS NOT INITIAL.
SELECT belnr gjahr lifnr xblnr
FROM rbkp
INTO TABLE it_rbkp
FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-awkey+0(10)
AND gjahr = it_bkpf-awkey+10(4).
ENDIF.
ENDIF.
Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
Kindly clarify.

Hi Saurabh,
Please see the example code that I have developed for you. It will help you solve the problem.
REPORT ZTEST_3 .
tables : BKPF.
data : begin of it_bkpf occurs 1,
         belnr type RE_BELNR,
         awkey type awkey,
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf.
data : begin of it_bkpf1 occurs 1,
         belnr type RE_BELNR,
         awkey type gjahr,              " change the data type
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf1.
data : begin of it_rbkp occurs 1,
         belnr type BELNR_D,
         gjahr type gjahr,
         lifnr type LIFRE,
         xblnr type XBLNR,
       end of it_rbkp.
select belnr
       awkey
       awtyp
       gjahr
       from bkpf
       into table it_bkpf
       where BUKRS = 'TELH'.
loop at it_bkpf.
it_bkpf1-belnr = it_bkpf-belnr.
it_bkpf1-awkey = it_bkpf-awkey+10(4).           "Here only append the required length.
it_bkpf1-awtyp = it_bkpf-awtyp.
it_bkpf1-gjahr = it_bkpf-gjahr.
append it_bkpf1.
clear it_bkpf1.
endloop.
select belnr
        gjahr
        lifnr
        xblnr
        from RBKP
        into table it_rbkp
        for all entries in it_bkpf1
        where belnr = it_bkpf1-belnr
This is just an example. Change the fields according to your requirement.
Regards
Abhii
Edited by: Abhii on Mar 9, 2011 9:08 AM

Postal Code and Region relationship in AR customer

Hi,
Is there a table that maintain the relationship between Postal Code and Region?
If User keyed in the postal code, it would be able to identify the region.
Is there a place to configure it in SPRO?
Thanks
Bye

Hi,
As it was suggested in different threads, you may think to continue updating the address with the BAPI_ADDRESS** and right after the commit, simply trigger XD02 transaction in batchinput + ensuring that ZAV_FLAG is checked in the initial screen then save. This would re-synchronise the master data with the address.
An alternative in one step would be to trigger class CMD_EI_API directly with one of the MAITAIN methods.
Additionallly, SD_CUSTOMER_MAINTAIN_ALL is used in standard during the maintenance of a consumer using the standard customer master data transaction XD01 & XD02.
It is not intended to be used out of the transaction and in no case it should be used out of its original context. Due to the specificity of the function module, out of the original context we may face limitations and data inconsistencies.
This is precisely what you face in your case.
For the maintenance of customers, there is NO BAPI and NO direct function module.
There are some functions modules like the one above where the name is looking nice. But these should not be used.
Below ECC 2005 (6.00), the only solution was batch input and DEBMAS idocs. See note 384462
Starting with ECC 2005 (6.00) and above: a synchronisation tool has been introduce. See class CMD_EI_API and VMD_EI_API
Hope this helps
BR
Alain

If I have my product code and cd for Adobe Creative Suite 5 can I obtain the serial number?

If I have my product code and cd for Adobe Creative Suite 5 can I obtain the serial number? I had the serial number on my college email which I can't access now that I've graduated.

adobe support might be able to help you,
contact adobe support, https://helpx.adobe.com/contact.html

Custom process code and FM for custom IDoc...

Hello Experts,
I created a custom IDoc based from ARTMAS05 IDoc. This is because we only need 3 segments and
the standard idoc(Artmas05) contains so many segments that we need.
Now, will I create a custom process code and FM for this? how do I go about this?
Thank you guys and take care!

Hello,
Here are the Steps that we need to be following while creating a Custom Process Code with Custom Function Module. ( Since the Segments to be handled are very Less, I am recommending that you go for a Custom Function Module).
1. Go to SE37 Create a Function Module. Please ensure to Create it with the IMPORT / EXPORT /TABLES parameters exactly in the way that they exist in any Standard SAP Inbound FM (Refer to IDOC_INPUT_ORDERS for example).
2. Once our FM is Ready (Need not be Complete with the Code to go ahead with the Process Code Creation) and Active, the next Step is to Create an Entry in the Transaction Code BD51 where we will register the Function Module.
3. Next, we'll have to go to T-Code WE57 where we'll have to make an entry for the Function Module with the IDoc Type & Message Type.
4. Finally, go to WE42 and Create a New Process Code and assign the Function Module and the Message Type.
NOTE 1 : The Process Code is, as we know, Client Dependent. So, once you create a Process Code, we need to have it migrated to the Testing Environment to Start & Carry Out Testing.
NOTE 2: If Step 2 & 3 are missing, then we'll not be able to assign the Function Module in WE42 while Creating Process Code.
Hope it was helpful.
Thanks and Regards,
Venkata Phani Prasad K

How do I do use the custom code and format for a percentage with 2 decimals in Report Builder 3.0?

In Report Builder 3.0, I have the following custom code entered:
Public Function SafeDivide(Numerator as String, Denominator as String) as String
Try
If Numerator = “” or Denominator = “” then
Return “-“
End if
If Numerator = “-“ or Denominator = “-“ then
Return “-“
End If
If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
Return “-“
End if
If IsNothing(Numerator) or IsNothing(Denominator) then
Return "-"
End if
Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
Catch
Return "-"
End Try
End Function
I call the custom code in the cell with the following equation:
=Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
I have the format for the cell set to 0.00%, but it’s not being followed.
I want the result to be formatted as a Percentage, but instead I get values like:
-78.9473684210
80
300
-100
I have the format for the cell set to 0.00%, but it’s not being followed.
How do I do use the custom code and format for a percentage with 2 decimals?

Hi AngP,
After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
compared.
To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
BackgroundColor:
=iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

For abap-hr i need datatype and length for the fields which i selected

hi seniors,
      I got one task for which i have to get the data type and length for the fields of a table in abap-hr. I am using dd03l table, but my team leader told me to not to use this. So, please anybody can help, i will be thankfull.
      I have to select PA30 fields in which pernr and choic, subty and whatever i have selected the infotypes fields. If there is any function module to find data type and length or else any other table.
thanks,
sekhar.

Hi,
Try using the Function Module "DDIF_FIELDINFO_GET". You can use this for fetching the complete details of a structure or, a specific field.
Input:->
TABNAME        PA0001
FIELDNAME     PERNR
Output:->
Check the DFIES_TAB it will contain all the details you need for the specific field.
Sample--->
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
    TABNAME              = 'PA0001'
*   FIELDNAME            = ' '
*   LANGU                = SY-LANGU
*   LFIELDNAME           = ' '
*   ALL_TYPES            = ' '
*   GROUP_NAMES          = ' '
*   UCLEN                =
*   DO_NOT_WRITE         = ' '
* IMPORTING
*   X030L_WA             =
*   DDOBJTYPE            =
*   DFIES_WA             =
*   LINES_DESCR          =
TABLES
   DFIES_TAB            = MY_DFIES_TAB
*   FIXED_VALUES         =
* EXCEPTIONS
*   NOT_FOUND            = 1
*   INTERNAL_ERROR       = 2
*   OTHERS               = 3.
Hope this was of some help.
Best regards,
Sagar.

Oracle Error Code and Message for Query Timeout

Hi,
I need to catch the oracle error code and message for query timeout.
I am using Oracle 9i and could not find any relevant error code/message
for query timeout in Oracle Error Messages.
If anyone has encountered such error messages, please let me know the
Oracle Code or Error message.
Thanks & Regards,
Kanjana

Fly is correct in that Oracle will normally let a query run forever in the absense of a user profile or dbms_resource setting that limits a users (query) resouce usage.
The errors returned for these condition would probably vary but errors ORA-02092 "exceeded session limit on CPU usage, you are being logged off" and ORA-02093 "exceeded call limit on CPU usage" might be of interest.
But for distributed queries Oracle does impose a time limit. See Oracle error ORA-02049 "timeout: distributed transaction waiting for lock"
HTH -- Mark D Powell --

Can someone please tell me the exact screen measurements (width and length) for the 13 and 15 inch macbooks?

Can someone please tell me the exact screen measurements (width and length) for the 13 and 15 inch macbooks?
I've got a 13 inch Air but I need to know the visible dimensions of the 15.4 macbook pro.
Thank you

You should be able to identify the MagSafe adapter and cord from Support page:
•Intel-Based Apple notebooks: Identifying the right power adapter and power cord
•Apple Portables: Troubleshooting MagSafe adapters
Hopefully this helps. If you have a defective adapter, take it along if you happen to
have access to an Apple Store or Authorized Apple Service Provider, to match it.
PS: there is a MagSafe plug adapter to use one kind of MagSafe with later model
http://eshop.macsales.com/item/Apple/MD504ZMA/
PPS: MagSafe 85W Adapter compatible with your computer, see specs:
http://eshop.macsales.com/item/Apple/MC556LLA/
PPPS: Six foot AC power cable, replaces duck-head:
http://eshop.macsales.com/item/Apple/PWRCBLMSA/
Good luck & happy computing!
edited 2x

R/3 Field name for "Pipe Length" and "Length" for SD Billing

Dear Gurus,
I require the R3 tables and fields for "Number of pipes" and "length".
These Fields are used in Billing Document Data: Items (As of 2.0B) (ZS2LIS_13_VDITM) for BI report.
Your Help is greatly appritiated.
Thanks and Regards,
Sharath

Hi Sharath:
Some questions for you:
- What is the exact Technical name of the DataSource? Is "ZS2LIS_13_VDITM" or "2LIS_13_VDITM"?
- Can you see the "Number of pipes" and "length" fields in Transaction Code LBWE? What are their Technical Names?
Those field descriptions don't ring any bell for me, so my guess is that you're dealing either with a Generic Extractor or an Enhacement to the Standard Extractor.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jan 21, 2011 10:23 AM

How to set the BARCODE width and length for label printing..

Hi All,
How to set the Code 39 barcode label format in the sizxe of 0.20" * 1.4". By default while printing barcode size exceeds my current requirement. Please let me know to customize the size of barcode labels.
Thanks.

I don't know what you mean by "Code 39" because my Output Designer software doesn't offer that barcode (or do you mean "code 3 of 9?). In any case, are you trying to control the size of the text (which is what I think of when you refer to "label")? If you are, then just change the font & size. If you are wanting to modify the physical characteristics of the barcode itself (height & length for a certain number of characters) then you are probably out of luck. Or at least in for some trial & error.
There are a series of "barcode.xxx" files in the 'config' folder where Output Designer was installed to. These are text files that contain the physical characteristics of the various barcodes for various printers. The parameters that you would be interested in is the height and width of the bars (black & white). For example, a barcode might be defined as .400 high with narrow bars 3 "dots" wide, wide bars 9 "dots" wide and white space the same or different. Presumably changing these values would affect the generated barcode. For example, in this example the wide bars are 3 times the width of the narrow bars so I would assume that relationship would have to remain. To make the resulting barcode shorter you would then use 2 for the narrow and 6 for the wide.
You would have to make the change in the file(s) that would be used for your printer(s).
There are four width values for each of the parameters. Most of the barcodes only use 2 but some have 4. I'm assuming that when there are 4, like in "4 8 12 16", that the barcode definition has 4 different widths of bars and/or spaces.
There is no guarantee that the scanning hardware & software will "see" and interpret the resulting barcode correctly.

Transaction Codes and BAPIs for Mobile Time And Travel

Hi All,
Please can anyone give me the "Transaction Codes" and "BAPIs" that are needed and used for developing an application for Mobile Time and Travel.?
Please help me out.
Cheers,
Anu.
Message was edited by:
 Anuradha Yandamuri

Hi Anu
Below are the Functional Modules used in the standard MTT application.
RFC's for Time Sheet (MTS)
CATS_MY_GET_MASTER_DATA
CATS_MY_GET_PICKLIST_FIELDS
CATS_MY_GET_REJECTION_REASONS
CATS_MY_GET_TEXT_ELEMENTS
CATS_MY_GET_TIME_DATA
CATS_MY_GET_BOOTSTRAP
CATS_MY_GET_CUSTOMIZING_DATA
TT_GET_PICKLIST
RFC's for Travel Expenses (MTR)
WAF_TRIP_ADD_RECEIPT
WAF_TRIP_CHANGE_RECEIPT
WAF_TRIP_CREATE
WAF_TRIP_DELETE_RECEIPT
WAF_TRIP_GET
WAF_TRIP_GET_CREDIT_CARD_ITEMS
WAF_TRIP_GET_CUSTOMIZING
WAF_TRIP_GET_DELETED_LIST
WAF_TRIP_GET_LIST
WAF_TRIP_MODIFY
WAF_TRIP_PROCESS_RECEIPT
WAF_TRIP_RESULTS
Hope this helps
Thanks
Raj

Sample code and transaction for this requirement

Developed a SAP Script for the shipping details. Shipping details is a legal document for the forwarding agent who is going to carry the shipment goods from the company to the customer

Logic is good but try to avoid MKPF Table..
I guess you can use EKBE table instead of MKPF and MSEG table.
your code will take while if you move to PRD.
Other table fields logic is good.
Thanks
Seshu

Personal Data and Address for Country Grouping 99 - error on ESS

Hello All,
I have configured personal data and address infotypes in ESS for the country grouping 99.
I have done the following config
1. Assign Screen Structure to Infotype Versions
2. Define Active Subtypes and Use Case
3. Define Country-Specific Applications
4. Created a Z service and then assigned this service to subarea.
I made use of US service and copied to z.
after the config when i log on to the portal and check the personal data or address links am getting the error:
An exception occurred that was not caught., error key: RFC_ERROR_SYSTEM_FAILURE
the st22 dump is
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
I searched in the forum but still am unable to figure it out where i am wrong or missing any config or any other technical error.
Can any one pls help me

http://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoReuseCountryspecificapplicationsforMolga99
check the steps in above link
and also please check with some standard country like india 40 or usa 10 what use cases and time constraints have been set
INFTY - Now specifies the infotype.
USECASE - Corresponds to the value in the table V_T7XSSPERSUBTYP.
ZEITB - Corresponds to the value in the table V_T591A (V_T582A).
Page 2
SUBTYPE_TAB - Here, you will find a list of the subtypes that have
already been checked and that are correct.
You then find the subtype in METADATA-SUBTY. However, you must move up
one subroutine in the call hierarchy in advance to do this.
This data makes it easy for you to identify the infotype and the subtype
and correct the inconsistency by making entries in the tables mentioned.
ie
T_cd:SE24 >>CL_HRPA_PERNR_INFTY_XSS >> CHECK_USECASE_WITH_CONSTRAINT >>
for
usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
you need to have
zeitb = '1' OR zeitb = '2' (table V_T591A)
for
usecase = A2, A3, A5, B2, B3, B5
you need to have
zeitb = '2'
for
usecase = A6, B3
you need to have
Zeitb = '3'

Postal codes and Length for country

Similar Messages

Maybe you are looking for