Postal giro office entry is missing

Hi Guys,
We are doing a payment method M for Switzerland. And we've carried out config of FBZP.
But when we execute F110, we get the following error:  Postal giro office entry is missing. In Payment method for country code>
Required master record specifications, we did not flag Street, PO box or PO postal code which may caused this problem. Yet we continue to get the error message.
Please help.
KO

Hi Jay,
In the configuration for "Set Up Payment Methods per Country for Payment Transactions", for your country and payment method,if you go into details, then under the "Required Master Record Specifications" group you will find a Checkbox called "Street, P.O. Box or P.O. Box pst Code".  If you flag this checkbox, then the vendor master record should contain these details.  then only the payment can be carried out in F110.
Hope this helps you.  Please reward points if found useful.
Regards,
Sreekanth....

Similar Messages

  • Does anyone know what this is? Postal giro office entry is missing

    SAP Masters!!
    "Postal giro office entry is missing" is the error I get in the proposal log for F110 as an error. Any help would be greatly appreciated.
    Jay

    Hi Jay,
    In the configuration for "Set Up Payment Methods per Country for Payment Transactions", for your country and payment method,if you go into details, then under the "Required Master Record Specifications" group you will find a Checkbox called "Street, P.O. Box or P.O. Box pst Code".  If you flag this checkbox, then the vendor master record should contain these details.  then only the payment can be carried out in F110.
    Hope this helps you.  Please reward points if found useful.
    Regards,
    Sreekanth....

  • Error "The entry is missing in T009" during PO creation

    Hello expert,
    I have created one new plant. Also assign with Company code and Purchasing Organization. Now when i am going to create Purchase Order, error message is showing "The entry is missing in T009"
    Pls give resoluation asap.
    Regards,
    Nilesh

    Hi Nilesh
    See this error is coming because of youir fiscal year variant. There are many errors you can get apart from T009...like T009B,C.
    You please consult your FI resource for this. You have to maintain Fiscal variant. As you have indicated that you maintained it..please cross check with FI resource. T.codes are OB27& OB37

  • Entry VEHICLE missing in table COM_SE_BUSOBJ

    Hi Experts,
    I’m facing an issue in SAP VMS (Vehicle Management System). If I click on the “Find” option in VELO transaction then list of vehicles will be displayed but system throwing following error” Entry VEHICLE missing in table COM_SE_BUSOBJ”
    Plz help me to solve.
    Thanks in advance!
    Regards,
    Naga

    Hi Naga,
    You have to maintain business object VEHICLE in customizing table COM_SE_BUSOBJ:
    SPRO -> SAP Netweaver -> Application Server -> System administration -> Search engine service -> Define business objects for search engine service
    Maintain record:
    Business object: VEHICLE
    Object type: 1
    You have to enter the Index-ID for SES, see F1-help.
    Regards
    Joachim

  • DEBMAS failed in target R/3 system - one entry is missing in VBUK.

    Hi,
    I have got an issue while sending a customer from one R/3 to another R/3 system using BD12.
    The inbound IDoc in the receiving system got failed by stating " Entry 0050001076 does not exist in VBUK - check your entry ", means one entry is missing in the table. VBUK table is holding data of sales documents, i sent the customer alone from the source system but i am not sure why this sales documents involved in that IDoc. I couldn't find the segment for the error data in the IDoc too. looks weird for me.
    Please let me know your idea on how to resolve this issue.
    Thank you.
    Regards
    Lakshman.V

    Hi Laksman,
    Looking to your error it seems that the receiving system is failing the inbound IDOC as it might be configured to accept the sales documents informations though it is not maintained in your IDOC.Check your SPRO settings.
    Also check for the record values of the customers that you are trying to post.There can be a possiblity that you are posting the record for which the sales related information is already maintained. In that case you might get this error.Check for that particular record in the receving system.
    Hope it helps.
    Thanks,
    Minaz

  • "The entry    is missing in table T030"

    Hi,
    I'm trying to close a period but, after all the selections made, when I execute I get this message: "The entry is missing in table T030". I mention that I'm trying to do this in localization for Romania. Maybe somebody could tell me what this message means and what should I do?!
    Thanks, Andreea

    Hi Andrea
    It looks like there is some account determination that is missing. Please recheck using TCode OBYC(relating to MM). Also please provide detailed information as to what transaction was exceuted when you got the error message.
    However do check your automatic posting procedures in OBYC.
    Regards,
    Karthik
    Message was edited by:
            Karthik Coneru

  • Eclipse build path entry is missing

    Hello, I have just installed Eclipse 3.3 on Ubuntu. When I click on File...New...Java Project, and name my project, the project appears on the left with a small red box indicating an error. The two errors indicated are:
    "The project cannot be built until build path errors are resolved"
    "Unbound classpath container: "Default System Library in project "Test""
    When I right click on the project and on properties, there is another error:
    "Build path entry is missing: org.eclipse.jdt.launching.JRE_CONTAINER"
    I tried to click on "Properties..."add library", and add the JRE system library, but when I click next the window does not move to the next screen. Anyone know how I can create a new project without these errors. Thanks.

    Do you have any JRE libraries configured? I think Eclipse detects one by default.
    You could try posting this on a Eclipse forum where you are likely to get a better response sooner.

  • Copying is not poss.because an entry is missing in Table TVCPL: L2, VTLA

    HEllo all,
    we just created a new condition type.
    (Re: sales order - new condition type - account assignment)
    Now when I create a new sales order and use this condition type, it is working fine. When I want to deliver the order, it gives me this error message:
    Copying is not poss.because an entry is missing in Table TVCPL: L2
    So now according to other threads in this forum, I went to copy control settings in VTLA. Now I wanted to create entry for Target delivery type L2, but the problem is, there is no target delivery type L2??? It is not in the list.
    What can I do??
    Thanks
    Anne

    Hi Raja,
    that's what I tried to do:
    I created a new entry, entered L2 for target delivery type and OR for source sls doc type.
    When saving I am getting:
    Entry L2   does not exist in TVLK - check your entry
    Thanks
    Anne

  • Copying is not poss.because an entry is missing in Table TVCPL: AF

    Good night,
    When Create outbound delivery with order reference, got an error :
    Copying is not poss.because an entry is missing in Table TVCPL: AF
    Message no. VL473
    go to t-code :VTLA
    want to create target delivery for AF but no selection for AF.
    Order transaction using TAV.
    Guru, guide me please.
    Thank you,

    Hi
    You have to create teh copy control from order to delivery process in VTLA
    You can copy the s tandard one OR to LF and then create copy control for   your new document  types.
    You have to configure at the header and item levels in this tcode. For detailed information, you can put F1 in each field and find out the purpose of each field.
    Reward if this helps.

  • Copying is not poss.because an entry is missing in Table TVCPL: ZO26

    Hi..
    In VL01N - outbound delivery , the following error occurs
    "Copying is not poss.because an entry is missing in Table TVCPL: ZO26 "
    here ZO26 - Sale doc. type
    Plz give me the solution , as soon as possible.
    Regards
    Deepa.

    Dear Friend,
    Please check you document flow settings ..
    What is understood from the error is that your item categories which are determined in the sales order are not relavent for delivery.
    While coping your item categories did you check for coping all the relavent item catwgories detminations.
    Next chech which item categories is determined and copy control settings.
    The problem here is the order documents items are not able to copy into delivery  because of your document flow setting.
    Check the same .You will be able to get the error.
    reward points if helpful,
    regards,
    Amlan Sarkar

  • Copying is not poss.because an entry is missing in Table TVCPL: Z03 Z15 Z25

    At the VL01N transaction itgives out a message of :"Copying is not poss.because an entry is missing in Table TVCPL: Z03 Z15 Z250" . I can't make the delivery even nor pass the initial screen of VL01N. Can anybody help me with brief explanations?
    Thanks in advance.

    Hi Hikmet Akcali,
    Copy Control for Delivery is not maintained in the system for Delivery type Z03 Sales Doc type Z15 and Item category Z250. Thats why you are getting this error.
    Please maintain the copy control settings in VTLA ( copy control sales doc to delivery doc)
    For this go to VTLA ( tcode) and create entry for Target delivery type Z03 and source doc type Z15 , by copying from an existing combination which is most similar to this Dely doc / sales doc combination.
    If this entry already exist then , create the entry for the Item category Z250 in the item level at VTLA. Maintain the settings like copying requirement and other field suitably.
    Save the settings and then create fresh delivery against the order.The error will not pop up.
    Thanks!

  • Copying is not poss.because an entry is missing in Table TVCPL: ZOV2 ZDV2

    Hi,
    I created  sales order and delivery for consignment purpose and for return it I create return sales order again, but at the time delivery creation the system shows me the error:
    "Copying is not poss.because an entry is missing in Table TVCPL: ZOV2 ZDV2"  Message no. VL473
    I checked VTLA and copy sales order type to delivery type with following data:
    Order requirements: 001
    Combination requirement : 051
    Header data: 001
    and copy item category REN as follow:
    order requirements: 101
    Item data: 101
    business data : 2
    but problem still remained. So I want to know how I can fix this error message?

    Dear,
    Table TVCPL is the table which is used for copy control so the error says maintain it properly and as per message
    there is error of Copy control Between Document ZOV2 to ZDV2 so I would suggest following step,
    1)Check the Item Cat.(REN) is define for delivery (ZDV2) check it out if Item Cat. (REN) determination is done in Delivery
       That is the only thing which will be missing, if stil problem exist then
    2) Do set Copy Control altogether again just copy it between RE TO LR and rename as ZOV2 and ZDV2 and retry ur process.
    AND IF U ARE DOING CONSIGNMENT PROCESS THEN LET ME KNOW AS IT REQUIRE DIFFERENT SETTING.
    Regards
    AJIT K SINGH
    HAPPY TO HELP U

  • Copying is not poss.because an entry is missing in Table TVCPL: ZOR3

    Copying is not poss.because an entry is missing in Table TVCPL: ZOR3
    Message no. VL473
    Murli

    hi
    maintain copy control for sales documents to delivery documents in VTLA
    zor3 to lf as target
    regards]

  • Database entries are missing

    I have multisim V9. several of the database entries are missing. Some were there before and are not there now. Could the database be corrupted? How can I restore the database? I tried to re install, several entries returned , but not all. Whole "families" are missing.

    Hi,
    If you have a database where some families are missing while others are available, this indicates a corrupt database.  You should reinstall but make sure you delete the Multisim install folder, the Add and Remove program utility does not remove your old corrupt database.
    Tien P.
    National Instruments

  • Debit entries are missing in table J_1ITRNACC

    Dear CIN experts,
    I have very strange problem in case of Capital purchase.
    My excise posting for capital goods is BED       100 Rs.
                                                                  Ecess       2 Rs.
                                                              H.Ecess        1 Rs.
    But at the time of excise posting in J1iex Accounting simulation is            BED   101.5   Cr
                                                                                    On Hold BED     50.0   Db
                                                                                    BED     51.5   Db 
    System is not considering 103 Rs amt for BED.
    After clicking on post system gives above error Debit entries are missing in table J_1ITRNACC.
    Please suggest for this problem.
    Regards,
    Gitesh

    Hi,
    SPRO-Tax on goods movement-India-Specify excise accounts per transactions.
    Check for GRPO & CAPE, whether Dr & Cr accounts are maintained properly or not.
    I think, entry is missing here.
    Regards,
    Piyush

Maybe you are looking for

  • OLAP error 1030008

    Hi Guys, good morning. has anyone faced the error 1030008. i searched in error documents, but can't find anything related to this one. i am getting this error when I am opening smart view "Cannot open cube view. OLAP error 1030008. NULL argument (%s)

  • Can we use bdc in WDA?

    hi,       can we use bdc in WDA? if yes please tell me how to do?

  • ICR 002 - Object Groups and Sets

    Hi, Tcode here is FBCR009. I need one help on the PROCESS 002 for ICR. In the current system, we have implemented the Object groups and Sub groups as mentioned below: Object Group - 100 Object Subgroup 100 Object group  Sequence      Company Field  C

  • In iOS8, my third party keyboards are working with every app except for the standard "Messages" app.  How do I fix this issue?

    I recently updated to iOS8 and downloaded a few third party keyboards.  These keyboards are usable and available with all apps except for the "Messages" app.  The third party keyboards don't even show up as an option while typing a text message or an

  • How to lower the CPU usage level?

    My CPU usage level has always been over 90% even after i restart my mac book pro, what should i do?