Posted valuesu201D in read mode

Hi Fellow Experts,
We are loading data into Infocube and by doing deleting the overlapping request option..Reports are built upon this cube..we have fiscal period as selection screen varaible. when i press F4 then it brings values from DIMID table rather than fact table so it shows historical fiscal period entries..for which no data exits , i need the fiscal periods which are having transactions in fact table..i after doing some search i found out this link where i can set the POSTED VALUES option in Generic Naviagation block
http://help.sap.com/saphelp_nw04/helpdata/en/1d/499d398b45160ae10000000a11402f/content.htm
But i am not how to set this to only particular queries and i am not using WAD at all.
Please throw some insight on this issue.
Thanks in advance.
shanthi Bhaskar

Hi,
You can select "only posted values" option in the input help settings.
http://help.sap.com/saphelp_nw70/helpdata/en/ae/1e9b3c334d8c15e10000000a114084/frameset.htm

Similar Messages

How to Publish on the Web a PDF document in Reading mode only

Hello,
I'm planning to post on my web site my manuscript in PDF format. I would like to make it available in a reading mode only.. I wonder if ADOBE LIVECYCLE Rights Management would allow me to do so in a safe manner. What would be the cost?
Thanks.
PATEGA

Thank you for your reply.
De : Test Screen Name
Envoyé : 15 septembre 2014 05:51
À : Gaétan Patenaude
Objet : How to Publish on the Web a PDF document in Reading mode only
How to Publish on the Web a PDF document in Reading mode only
created by Test Screen Name <https://forums.adobe.com/people/TestScreenName> in Adobe PDF Pack - View the full discussion <https://forums.adobe.com/message/6730511#6730511>

Why is the 'Next' button in 508 Screen Reader mode not working for RichTree

Hi ADF Experts,
My JDeveloper version is 11.1.1.8. The 'Next' button in 508 Screen Reader mode for tables works fine.
However, it does not work for trees, I can see only the first 23 or so items.
Any ideas?
What am I missing here?
Regards,
-ab

There is no official JDeveloper version is 11.1.1.8.0!
If you use an internal build ou should post to an internal forum.
If you use an official version please tell us which on.
Timo

Internet Read Mode Install Parameter

Is there an install parameter for Reader X for "Internet - Disp
lay in Read Mode by default" turned off?

As it's already been 9 days since I posted this and more things have happened, I'd like to close this post. As I've brought back the Macbook to another Apple Store, they would tell me that the Logic Board is broken. After all, the Apple people aren't always right and my first assumption seemed to be true and it was not the harddrive.
Anyhow, problem is not solved, but at least I know now what's going on.

Read mode - Web template Vs Characteristics

Hello,
I am using a web template in version 3.1. I have some navigation attributes. To try to enhance the display of filters value for some characteristics I changed in the web template the read mode from Q (posted values) to M (master data).
Unfortunately I see that the filter is still using read mode method Q. I have seen that this customizing exists also in RSA1 at the charcateristics level. If they are different, do you know which settings is used in the end ? Characteristics or web template ?
Thanks for your help,
Manuel

Hello,
I've found the solution, in fact web template is taking the lead but there is a correction to apply in version 3.1 :
Note 946661 - BOOKED_VALUES does not work correctly in Navigation Block
Thanks for your help,
Manuel

Acrobat 8 Reading Mode Question

I have Acrobat 8, updated to ver. 8.1.2., running on XP. When I select View>Reading Mode the display doesn't go directly to what I would understand to be Reading Mode. Rather, the first instance removes the Navigation Panel only, the second instance removes the toolbars but restores the Navigation Panel, finally on the third instance, both the Navigation Panel and the Toolbars are removed. When I choose View>Reading Mode while in Reading Mode, the display is returned to the normal mode directly.
Any thoughts?
Thanks.

Your process was probably fine, but the precision you want requires care in setting the boundaries. You can crop the right side on ALL pages and repeat the process for the left side. You then only have 2 files to work with. If you turn on the ruler or check the boundaries in the crop you should be able to get identical page sizes. It is interesting that the printer marks for the vertical markings do not line up from top to bottom.
Be aware that your cropping is just that. I just uncropped and got back all of the duplicates with the page numbers and all. Looks like you had done some rearranging and all. You will likely want to get rid of the uncropped information. The only way I know to do that is to reprint the PDF, which should be no problem for your scan. I am attaching an example of what I just mentioned. In practice, you should really redo the original and not try to play with a scan. The file is 2MB, that is large for just a 12 page document. This is all because you are playing with a scanned document. It appears that your original is even larger at 3MB, but part of the difference may be in my Adobe PDF printer preferences.
I strongly suggest you find the original document and work with it to get the style you want and then make a new PDF directly from the original. For posting on the web, that should be a lot cleaner (the graphics would still look nice - not too great with your scan) and the size should be substantially smaller. Thus I am suggesting an entirely different workflow. Bill

Q5 Reader Mode not working as hoped

Hello.
I got my spankin' new Q5 yesterday, and whilst I'm still figuring a lot of it out, I have to say that the reader mode in some web pages is not working as I would have hoped.
It is enlarging the text well, and it looks great, but it is not showing me all of the page. I realize that some webpages are made up of frames and various parts, but I would have expected it to show me the main text.
I read the wetcanvas forum a lot, and it is only showing me the first post of a thread, it isn't showing me other peoples' replies.
Also, whilst learning the Q5, I visited docs.blackberry.com and, again, it is only showing me a couple of paragraphs.
Is there anything I can do?
Thanks.

EUREKA!!!
Thanks for sticking it out till the bitter end.
Not only does it now work but after all that practise I don't think I'll ever forget how to deploy a farm solution, set the scope, retract, pull hair out, create features etc!
For anyone arriving at this thread.. the code below will check to see if the current user is a site admin and cancel the delete event if they are not, otherwise it will allow the delete event to happen
public override void ItemDeleting(SPItemEventProperties properties)
base.ItemDeleting(properties);
using (SPSite site = new SPSite(properties.WebUrl))
using (SPWeb web = site.OpenWeb())
int _currentUser = properties.CurrentUserId;
SPUser spCurrentUser = web.SiteUsers.GetByID(_currentUser);
if(spCurrentUser.IsSiteAdmin == true)
properties.Cancel = false;
properties.Status = SPEventReceiverStatus.Continue;
else
properties.Cancel = true;
properties.ErrorMessage = "Announcements cannot be deleted";

PDF printer has a problem with Safari in "Reader" mode in Windows7

As shown in the image above. When I try to use the PDF printer to print out a web page in Safari "Reader" mode, the lines near the bottom of each page get squeezed like this. There is no problem with XPS printer. I guess this problem is because of some incorrect settings in Safari or the PDF printer?
My system is Windows 7 Pro. I am using Acrobat X Pro. The page I am trying to print is http://en.wikipedia.org/wiki/Electronic_band_structure. This problem only happens when the webpage is adjusted into "Reader" mode in Safari.

Many thanks for your reply!
I am sorry, I did not make my question clear. I would like to save some web pages only in "Reader" mode, because in this mode all the advertisements are filtered out and the pages look much nicer than the origional layout.
I first let Safari to active "Reader" by clicking "Reader" button.
Then I click "Print" button and select Adobe PDF as the printer.
The problem is the PDF file has something wrong (shown above), and I would like to know how to avoid this problem.

Fold/Unfold (Outline) in BO 4.0 Webi Report - in Reading Mode do not work

I have BO 4.0 Webi report with fold/unfold functionality(Outline). It works fine when I open it in Design mode but do not work in Reading mode. Could anyone please advise if they have faced such issue?
Thanks in Advance.
Regards,
Anita

Hi All,
I checked with the BO authorization team who grant access to different user groups to access BO reports. It means that I was not having the access rights to view my report in "Rich Internet Application" mode. Once the access permissions were granted to my user group. I see the option as highlighted in red below. To view the report in reading mode in BO 4.0 BI Launchpad, you should set the preferences as below:
Thanks for your support.
Regards,
Anita

How to set "Read mode" as default view for a pdf?

Hi All,
I have a requirement to open a pdf in "Read mode" (to get the floating toolbar) whenever an user open it in Acrobat Reader. Is there anyway to set this option in the pdf like "Open in full screen mode"?
Or
Can we add any little javascript to acheive this?
Or
Is there any other way to get the floating toolbar and add it into the pdf whenever we require?
Please help.
Regards,
Muthuraj. D

No. Read Mode is a choice made by the user, nothing in the document can force it to happen.
There is no scripting or API access to the heads-up-display "floating toolbar".

How can a user enter a value in the field which is in read mode.

Hi all,
I am creating a badi for the valuation class.when ever i execute the mm02 transaction.if an invalid valuation class is entered,my error message is poping up.but it is coming in the display mode.i should get the valuation class field in the read mode.
Regards,
charita.

Hi Charita,
Use information message instead of Error message.Then it will not give u that field in non-editable mode.
<b>Reward points if it solves ur query or answer is helpful</b>
Thanks
Chinmay

Precautions to be taken while changing the Query read mode in PED system

Dear Experts,
I got a task to change the Query Read mode for more No. of queries in Production system directly itself.
Request you to let me what are the steps to be followed/precautions to be taken while changing the Query Read mode in PED.
one more doubt regarding this.....If i plan to change the Read mode of Query say Q1, how can i come to know weather the Q1 is executing or not executing by that time.
Thanks in advance for valuable response.
Thanks & Regards,
Ramesh - Kumar

Hello,
You can change the query read mode in transaction 'RSRT', here are the steps:
1) Access transaction RSRT and enter the query name
2) Select the 'Properties' option
3) Un-check the 'Info provider' setting next to the 'Read mode' --> This enables you to change the read mode of the query --> Execute
4) Choose the option 'Generate Report' to re-generate the query program
Hope this info helps.
Thanks
Bala

Save as text and reader mode

Firefox needs a save as text setting. There is a save as text add on. However, twice the add on ceased working. Twice, I had to uninstall firefox, reinstall firefox and reconfigure the settings.
In the alternative, Firefox needs a 'select text' in its settings. The stock android browser has 'select text' in its settings. Click on 'select text', touch webpage, two arrows appears, spread arrows apart, touch screen, a pop up menu offers: share selected text or copy. I select copy. Open 920 text editor, create a new plain text file and then touch screen.. However, text is not copied. I have to repeat this whole procedure several times because text is copied into a new plain text file.
Whereas, Firefox cannot even bring up the pop up menu. I long press a paragraph in firefox. The two arrows appears. I spread them apart. I touch the screen. No pop up menu offering open to copy.
Nor is reader mode an alternate to saving as text. I have not be able to save a webpage in reader mode because the book icon is rarely displayed in the title bar. Why? Firefox's article on reader mode does not disclose what file format the files are saved as. Can the reader mode files be converted to plain text files or PDF to be later read on a computer?

Hi badbiosvictim,
I see in the device information that you are running version 21. There were some improvements made in Firefox since then and I encourage you to see if the update helps resolve your copy and paste issue.
However there is also save page as pdf that you can save on the device and read in a file reader.
I hope this helps!

I can't find the READER Mode in the Search window? I'm using OS X 10.10.1 and Sarfari 8.02

Once in a Web-Site, if I wish to read an article I could click on the READER box in the Search Window and just the article would come forward blocking out everything else.

If an article is "Reader" capable, a 3½ bars gray icon will appear at the left most part in address bar
Click it and it will turn black indicating that the article is in Reader mode.
Best.

How to hide read mode navigation in acrobat xi permanantly

How to hide "Read mode navigation" . In my application i am opening pdf file in light box window where i disable right click to protect download and print pdf file( only View ). but This Read mode navigation is appearing automatically when we put curson on file even if we protect the document. I have purchased Acrobat professional xi to created protected acrobat file by disabling menu tool bar but there is no option to hide readmode navigation. Please let us know how to hide this.
Thanks,
Nagendra

If you want the form "flattened", that is all form fields converted to PDF context, you need to use some JavaScript to flatten the form fields. This will remove all form functionality. It will not prevent editing by Acrobat's text touchup or object tools.
The "submit" button is used by other users to sent the PDF form data to a central collection site or email address where the sender or provider of the form can collect the submitted data.
You could also use a digital certificate to sign the form and lock the fields. The signature will also verify that no changes have been made to the PDF since it was signed and one could also see what was changed.

Posted valuesu201D in read mode

Similar Messages

Maybe you are looking for