Poster frame for chapter marker

In many of my productions the best place for a chapter marker isn't the best place for the vidoe to show up within a drop zone. Is there a way of keeping a chapter marker at a given timeline location but assign a different frame from the chapter to represent it on a DVD chapter chooser.
Andy

And now I am having trouble importing my chapter markers. The export fine to QT from FCP, they show on the lower R of QT. But when importing the movie into iDVD (haven't tried DVDSP yet) they do not show. My preferences indicates to ask about importing the markers - which it doesn't. And I tried import markers- which it didn't. So1) Any thoughts on what this issue is and 2) how do I change the chapter poster frame for a chapter marker within DVDSP?

Similar Messages

Can't set Poster Frame for Movies on site

Hi - Any insight into this problem is much appreciated - I've built a simple site, a few pages have 2 or 3 compressed MPEG-4 movie files on the page (they are roughly 30MB each clip). I built the clips in FCP then exported them using Compressor and saved them as MPEG-4 files. I then dragged the files onto blank pages and built the site that way. I have set the Poster Frames for these clips in iWeb08, but after I publish the site the Poster Frames only save on a few files, most do not. Also, some of the clips stop playing mid-way through. Any simple fixes for this/these problem(s)? Thanks.

"This whole thing stems from me being 41 and still bowing down to my Mother's every wish and guilt trip.
Sorry to tell you so late in your life that you only have one job when it comes to moms and grand-moms. Give them what they want!
Part of your "monicker" best describes the issue.
You can edit your published pages using hundreds of tools but the are best edited with a plain text editing app like BBEdit (any plain text editor works).
You can use Safari to view your page and even "save" the source code (Command-Option-U) and then "save as". Edit this new page to make your changes and drag it back into the appropriate Web older of your iDisk (replacing the older version).
I did it to one of my pages to add a sound file to one of my slideshow pages:
http://web.mac.com/kkirkster/iWeb/Maya/Maya_files/slideshow.html
just because others said it couldn't be done.
Darn. Now you have another mother, or worse, an in-law. Sorry.

Can't set POSTER FRAME for .mp4 movies... can for most others

I've got QTPro.
When I try to create a poster frame for a .mp4 movie I compressed it tells me I have to save and does one of the following two things:
1) Tells me I can't save after I hit SAVE
2) Tells me it wants to save as a .mov file... I don't WANT a .mov file.
Any thoughts?
CaptM

"This whole thing stems from me being 41 and still bowing down to my Mother's every wish and guilt trip.
Sorry to tell you so late in your life that you only have one job when it comes to moms and grand-moms. Give them what they want!
Part of your "monicker" best describes the issue.
You can edit your published pages using hundreds of tools but the are best edited with a plain text editing app like BBEdit (any plain text editor works).
You can use Safari to view your page and even "save" the source code (Command-Option-U) and then "save as". Edit this new page to make your changes and drag it back into the appropriate Web older of your iDisk (replacing the older version).
I did it to one of my pages to add a sound file to one of my slideshow pages:
http://web.mac.com/kkirkster/iWeb/Maya/Maya_files/slideshow.html
just because others said it couldn't be done.
Darn. Now you have another mother, or worse, an in-law. Sorry.

Premiere Elements 9 - unable to select a "poster frame" for DVD Menu - Scene Selection

I've tried a number of different DVD menu themes and the problem is the same for all. The Scene Selections don't seem to provide any way to include a graphic for the poster frame. Have been able to provide a menu background with no problem. Interestingly, the poster frame section of the menu edit fields appears to be somewhat truncated (the spot where you would expect the "drag media here" shows only the bottom portion of a box with no wording and the input is truncated at 00;00;0 with the fifth zero partially cut off.
Any one else seen this? I know I've provided graphics for the scene buttons in the past but cannot seem to get past this situation this time.
Thanks

In Adobe Encore (the authoring program, included with PrPro), one can set the Poster Frame for non-Motion Thumbnails.
For showing a different Clip, in Motion Thumbnails, one must create Menus, that have a Video background, that just looks like it has Motion Thumbnails - they are actually PiP in the Video background.
I do not know about the often touted Sony DVD Architect, regarding setting Poster Frames.
PrE's authoring control is a bit limited, and is designed to get the "average" Project authored, with few navigational bells and whistles.
Good luck,
Hunt

Setting poster frame for video automatically?

Does anyone know if there is a way to automatically set a poster frame for imported video files in Aperture 3? I was very pleased to be able to import all of my camera video files, but once imported they all were black. I am able to click and "Set Poster Frame" but that is a very tedious process to go through for even a small amount of video files.

Thank you!!!! I've been working on this for hours. I've completely erased and re-imported the videos no less than three times. The poster frames would show...and then disappear on final import...it was driving me crazy!
Just in case I can help someone else track this post down with google...
Aperture 3 was giving me black thumbnails when I imported Flip HD videos. I tried setting poster frames, but no love. Generate thumbnails corrects the problem of black poster frame, black key frames, black thumbnails, whatever you want to call it. thank you.

Poster frame for entire movie

I have searched the manual and this forum, and I can not find an answer. I know how to set a poster frame for a specific clip, but how do I set one for the entire film? I want to upload a movie to youtube, and I want a specific image to show up when representing the movie.
thanks

Great. thank you. Yes after I posted my first video I found that it selected a poster frame of its own anyway. I just wanted to make sure there was not a black screen representing the video.
thanks!

Poster frame for cover flow view with safari bookmarks?

i have a friend on a pc who wanted to have his bookmarks display in a visual way so that he doesnt forget about them. so i told him to download safari for windows and use the cover flow view. he likes it, but some sites are not very recognisable by just the thumbnail of the front page. so i was wondering whether there is a way (or a workaround) to choose another image/icon for these bookmarks in the same way that it is possible to select any scene from a movie and have that be the icon/poster frame.
i hope i havent expressed this unclearly. thanks.

Since just moving all my music to a NAS I was here researching the same issue. I can see the other three (only when music is specifically selected) but not Cover Flow. I believe it has been disabled. I played around with grid view with 428 albums and iTunes for Windows loads the art fresh evertime you start it and, on the smallest art size in grid view, it took a bit of time to load all the art.
If Cover Flow needs to cache up all the art work in advance then I could see how it would easily take my setup between 45 seconds to a minute to cache them all up.
Perhaps that would feel too clunky for Apple especially if one were to aggressively swipe through a set that wasn't completely cached.

'poster frame' for movies is not saved

Hi iTunes people,
Note - this all used to work in Leopard - this feature has become non-functional since the arrival of Snow Leopard.
When I set the POSTER FRAME, via the contextual menu that appears for an entry in the movies section of iTunes, it is not saved.
Although the 'artwork' image in the lower left of the itunes window temporarily shows the frame I selected, if I go away from that item or perform the same action on another movie, the poster frame that had been selected is gone and is replaced with whatever was there from before.
The only way it appears that one can save a poster frame is to physically drag-n-drop an image into the ARTWORK tab of the 'Get Info dialog for that item.
Does anyone have any other suggestions about how to make this feature work - without having to create and deposit artowrk into the GetInfo dialog? I lost 1900+ poster frames I had created for various movies and clips because of this problem. I really am not looking forward to again having to do all that work.
Thanks!

Hi,
Change the title of the query in tcode
SQ01-->change
here change the title and save
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 3:49 PM

Setting poster frame for video

Is this feature gone in version 8.0 or am I just not finding it.
I've paused and then control-clicked, but I'm not seeing "set poster frame".

It works for me. But I've noticed this error: While iTunes usually shows the frame I choose, the finder, when in icon view, doesn't. It often picks something close (usually earlier). I usually have to search around to get it to set to the one I choose. For example (not real values just to illustrate): I choose the frame at 19:13, but the finder shows 19:02. Then I continue to choose: 19:15, 19:17, 19:21. Each time iTunes is correct (though I have to sometimes change views), but the finder doesn't, until I hit on the one that is close. Even then, it's often a little wrong, usually a few seconds before. I don't know anything about keyframes, but would that be what it's doing?

Resetting poster frame for video

I accidentally hit the Set Poster Frame option on a video I bought from iTMS and want to reset it to the original. How do I do that?

There is no reset option for poster frames.
Just move to the frame (probably somewhere at the beginning) that was your previous poster frame and set it again.
Hope this helps.
M

Setting poster frame for front row

i am in the process of putting a bunch of videos on my hard drive to use in front row. the problem i am having is that front row basically shows the 1st frame as the poster frame. so i have no clue what the episode is about.
if i set the poster frame in quicktime pro and then save it it saves it as a .mov file. my videos are .mp4. how can i change it so it saves them as .mp4 or does this really not make a difference ?

Thanks for the answer. Didn't think about that. Guess my brain is still formatted as Windows.
Though I don't get the preview:
http://localhostr.com/files/534186/img.jpg
I have checked the "Show icon preview" in the View Menu, and relaunching Finder didn't help.
Neither does removing the .DS_Store (Terminal).
Tried with a few JPG's.

Setting Poster Frame for H.264 Youtube HD video exported from Pr CC

Hey All,
I've searched many of the forums for an answer to this, but most of them refer to setting poster frames in encore/media encoder.
I'm wanting to select a specific frame from the video i've created to be used as the poster frame (i.e. the frame that is displayed as the preview of the video before it is played to show the viewer the content of the video) on the video when it's uploaded, either to Youtube or Facebook etc. As i'm not using En or the Media Encoder, I'm wanting to do this directly from Premiere Pro CC.
I'm sure I've seen/used a feature to select a poster frame within Pr before, but can't for the life of me remember or find where it is (if it is actually there at all).
Can anyone provide any suggestions?

Unfortunately Compressor, Quicktime X and Quicktime 7 can't play a Blu-ray .264 video files. This makes it hard to test your raw Blu-ray videos.
I found an app that will plaback the Blu-ray .264 video file on a Mac, VideoSpec. It's a free app!
http://videospec.free.fr/index.html
Drop your Blu-ray .264 video onto the open window and hit the play button in the upper left. VideoSpec has the Mplayer incorporated into the app. I guess you could download the stand-alone Mplayer app. But, Videospec gives you more options, video info for example.
What you could do to save on Blu-ray discs is to burn the Video onto a DVD for a test. You can only burn about 35 minute onto a DVD disc.
http://forums.creativecow.net/thread/8/1107035

Wrong picture ICON for chapter MARKER!

I'm trying to make a wedding DVD for a friend, I've never had a problem before but it won't play the correct chapter thumbnail in the template that matches the correct marker made. I'm using "silver wedding".
I edited it in FCP using chapter markers, at first they wouldn't even load correctly when I put it in iDVD (only the words, no picture at all) now I got it to work by turning off the "loop" but now 2 of the 15 chapters show the WRONG thumbnail icon that goes with that chapter. It's completely arbitrary, I see no logical pattern. And here's the funny part, when I select that chapter, it's the correct chapter, just showing the wrong picture icon for that chapter. Any thoughts?

Hi
My thoughts
a. Trash iDVD pref file
b. In FCP - NO Chapter mark at the very beginning ! iDVD Has to do this by it self.
c. From FCP I do
• Export out as a QuickTime .mov file (Chapter marks set to be exported !)
• Not self contained (not important but saves time and space)
• NO QuickTime Conversion - IMPORTANT
d. There is an iDVD BUG ! If You make an iDVD project - then go back to movie
to alter/correct - iDVD will notice and ask to Update or Cancel - NEITHER WORKS
Medicine - Start a new iDVD project and re-do.
e. Try another theme - to figure out if this can be the culprit
f. free space on internal start-up hard disk > 25Gb ?
Yours brain storming Bengt W

Setting poster frame for imovie theater section

Is it possible to set the poster frame in the Theater section, instead of the one generated automatically?

Gilles,
I don't think so.
Some recent discussions on the topic:
https://discussions.apple.com/thread/5654627
https://discussions.apple.com/message/24083812#24083812
Matt

Is there a way to browse all "poster frames"/"album artwork" for TV Shows?

Here's the scenario...
I have a LOT of old cartoon shows in my iTunes collection, and I have them tagged and sorted as "TV Shows". Unfortunately, when browsing the collection using "Album View", iTunes only shows me ONE poster frame for the entire season.
This might be fine for some people, but not for me with regards to my collection of old cartoons, because I want each individual show to have its own poster frame that shows the title of that particular episode.
Yes, I know I can do that by playing the clip, stopping at it the title frame, right-clicking and selecting "Set Poster Frame".
That's not the issue though. The issue is that I (currently) have more than 2,000 shows in my collection and it understandably takes a long time to manually set the poster-frames for all of them. So I do a whole bunch every so often when I have the time to do so, and then wait a long time before I get round to doing some more.
Getting on to what the actual issue is though, it's that when using the "Album View" I cannot see the individual per-episode poster-frames of all my separate shows, and so I cannot see what I have artworked so far and what I have not.
So what I'm asking really is, does anyone know of any alternative ways (3rd-party apps) to at least VIEW (in some kind of "browse" mode), if not edit, individual TV Shows poster frames?
By the way, I know that converting the TV Shows to Movies will show me individual poster-frames, but that will kill all the hard work I've put into tagging the shows names, episodes, seasons, etc.
If I'm not making sense here, ask me for clarification on anything.
I'm using the latest versions of iTunes, and the Mac OS, on Intel, etc.

You won't be able to have a page showing 24 charts per host.
I really think that it is a bad idea to create a group per host, just to have the ability to add many charts.
The maintenance effort will be a big penalty.
Regards
Rob

Poster frame for chapter marker

Similar Messages

Maybe you are looking for