Postfic qmgr running and relaying, but shouldn't be!

Hi,
We are running a separate web server and mail server (both 10.4.8). Mail services are turned OFF on the web server, but the web server keeps trying to relay a message to the mail server.
Here is an excerpt from the mail.log on the web server:
Dec 21 13:38:26 xserve3 postfix/qmgr[567]: D1C008F1564: from=<www@www.<company>.com>, size=1831, nrcpt=1 (queue active)
Dec 21 13:38:27 xserve3 postfix/smtp[27187]: 036F48F1567: to=<www@www.<company>.com>, relay=xserve.<company>.com[192.168.1.201], delay=0, status=sent (250 Ok: queued as DC2C7100524)
(192.168.1.201 is the internal IP of the mail server)
Other strangeness is that our web server is NOT named www.<company>.com, it is using the "www" as a default of some kind. It also appears to be sending to the default www user for some reason.
Here is a line from the firewall log that shows the communucation from web to mail server.
Dec 21 15:13:16 xserve3 ipfw: 1040 Accept TCP 192.168.1.204:57789 192.168.1.201:25 out via en0
I see the qmgr process running in the background, but don't know why. As far as I know, there is nothing running on the web server that should be trying to use postfix to send anything.
I'd appreciate any help troubleshooting the issue, or help in pinpointing what is triggering postfix.
Thank you!

If you connect to iTunes there is a bar under the device that breaks down how the storage is used.

Similar Messages

Firstly Agent running and ready but 1 minutes later is not running

firat:/oracle/product/10.2.0.4/agent10g/bin > ./emctl status agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is Not Running
firat:/oracle/product/10.2.0.4/agent10g/bin > ./emctl stop agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is Not Running
firat:/oracle/product/10.2.0.4/agent10g/bin > ./emctl start agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Starting agent ................................. started but not ready.
firat:/oracle/product/10.2.0.4/agent10g/bin > ./emctl status agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.4.0
OMS Version : 10.2.0.4.0
Protocol Version : 10.2.0.4.0
Agent Home : /oracle/product/10.2.0.4/agent10g/firat
Agent binaries : /oracle/product/10.2.0.4/agent10g
Agent Process ID : 23977
Parent Process ID : 23646
Agent URL : https://firat:3872/emd/main
Repository URL : https://muhtar.turktelekom.com.tr:1159/em/upload
Started at : 2008-09-11 11:29:58
Started by user : oracle
Last Reload : 2008-09-11 11:32:48
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 11
Size of XML files pending upload(MB) : 8.37
Available disk space on upload filesystem : 21.78%
Last successful heartbeat to OMS : 2008-09-11 11:32:09
Agent is Running and Ready
ooooooooooooooooooooooooooooooooooooo
1 minute later
ooooooooooooooooooooooooooooooooooooo
firat:/oracle/product/10.2.0.4/agent10g/bin > ./emctl status agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is Not Running
t:/oracle/product/10.2.0.4/agent10g/firat/sysman/log > vi emagent.log
2008-09-11 10:43:08,118 Thread-1 [Siebel Server] InstanceProperty (filesystem:logdir) is marked
OPTIONAL but is being used (00506)
2008-09-11 10:43:08,222 Thread-1 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2008-09-11 10:43:08,295 Thread-1 [E-Mail SMTP Inbound Server] InstanceProperty smtp_host) is marked OPTIONAL but is being used (00506)
2008-09-11 10:43:08,561 Thread-1 Undefined column name interval in expression active.requests
0) ? active.requests/(interval*60) : 0 (00104)2008-09-11 10:43:08,638 Thread-1 [BEA WebLogic Managed Server] InstanceProperty (version) is marked OPTIONAL but is being used (00506)
Thread-1 EMAgent abnormal terminating
please can u help me
thank you.

"emagent.trc" 1075 lines, 136000 characters
2008-09-12 14:51:52,104 Thread-1 WARN main: clear collection state due to OMS_version difference
2008-09-12 14:51:52,152 Thread-1 WARN command: Job Subsystem Timeout set at 600 seconds
2008-09-12 14:51:52,180 Thread-1 WARN upload: Upload manager has no Failure script: disabled
2008-09-12 14:51:53,111 Thread-1 WARN metadata: Metric VirtualHosts does not have any data columns
2008-09-12 14:51:53,259 Thread-1 WARN metadata: TABLE metric umsg_imap_user_count can't define table_name: mail_imap_usercount
2008-09-12 14:51:53,259 Thread-1 WARN metadata: Metric umsg_imap_user_count does not have any data columns
2008-09-12 14:51:53,260 Thread-1 WARN metadata: TABLE metric umsg_imap_db_session_count can't define table_name: umsg_imap_dbconnec
tions
2008-09-12 14:51:53,260 Thread-1 WARN metadata: Metric umsg_imap_db_session_count does not have any data columns
2008-09-12 14:51:53,260 Thread-1 WARN metadata: TABLE metric umsg_imap_socket_count can't define table_name: umsg_imap_socketcount
2008-09-12 14:51:53,261 Thread-1 WARN metadata: Metric umsg_imap_socket_count does not have any data columns
2008-09-12 14:51:53,261 Thread-1 WARN metadata: TABLE metric umsg_imap_connections can't define table_name: mail_imap_connections
2008-09-12 14:51:53,262 Thread-1 WARN metadata: TABLE metric umsg_imap_connections_lost can't define table_name: umsg_imap_connecti
ons_lost
2008-09-12 14:51:53,262 Thread-1 WARN metadata: Metric umsg_imap_connections_lost does not have any data columns
2008-09-12 14:51:53,262 Thread-1 WARN metadata: TABLE metric umsg_imap_connections_timeout can't define table_name: umsg_imap_conne
ctions_timeout
2008-09-12 14:51:53,263 Thread-1 WARN metadata: Metric umsg_imap_connections_timeout does not have any data columns
2008-09-12 14:51:53,263 Thread-1 WARN metadata: TABLE metric umsg_imap_connections_total can't define table_name: umsg_imap_connect
ions_count
2008-09-12 14:51:53,263 Thread-1 WARN metadata: Metric umsg_imap_connections_total does not have any data columns
2008-09-12 14:51:53,263 Thread-1 WARN metadata: TABLE metric umsg_imap_debug_user_list can't define table_name: mail_pop_users_list
2008-09-12 14:51:53,264 Thread-1 WARN metadata: TABLE metric umsg_imap_ds_metrics can't define table_name: mail_imap_functions
2008-09-12 14:51:53,266 Thread-1 WARN metadata: TABLE metric umsg_imap_network can't define table_name: mail_imap_network
2008-09-12 14:51:53,267 Thread-1 WARN metadata: TABLE metric umsg_imap_network_receive_bytes can't define table_name: umsg_imap_net
work_receive
2008-09-12 14:51:53,267 Thread-1 WARN metadata: Metric umsg_imap_network_receive_bytes does not have any data columns
2008-09-12 14:51:53,267 Thread-1 WARN metadata: TABLE metric umsg_imap_network_transmit_bytes can't define table_name: umsg_imap_ne
twork_transmit
2008-09-12 14:51:53,268 Thread-1 WARN metadata: Metric umsg_imap_network_transmit_bytes does not have any data columns
2008-09-12 14:51:53,269 Thread-1 WARN metadata: TABLE metric umsg_imap_command_counts can't define table_name: mail_imap_commandcou
nt
2008-09-12 14:51:53,269 Thread-1 WARN metadata: TABLE metric umsg_imap_protocol_metrics can't define table_name: umsg_imap_frequenc
ytimes
2008-09-12 14:51:53,270 Thread-1 WARN metadata: TABLE metric umsg_sps_metrics can't define table_name: mail_imap_sps
2008-09-12 14:51:53,270 Thread-1 WARN metadata: TABLE metric umsg_uptime can't define table_name: mail_imap_uptime
2008-09-12 14:51:53,539 Thread-1 WARN metadata: Name FileSystems has already been used
2008-09-12 14:51:53,539 Thread-1 WARN metadata: Name FileSystems has already been used
2008-09-12 14:51:53,896 Thread-1 WARN metadata: Metric RoutingIds does not have any data columns
2008-09-12 14:51:54,553 Thread-1 WARN metadata: Metric waiting_sessions does not have any data columns
2008-09-12 14:51:54,555 Thread-1 WARN metadata: Metric session_wait_chains does not have any data columns
2008-09-12 14:51:55,330 Thread-1 WARN engine: File=file:/oracle/product/10.2.0.4/agent10g/sysman/admin/metadata/oracle_integrationb
pm.xml,line=8: <AssocTargetInstance> is not valid element, will be ignored
2008-09-12 14:51:55,648 Thread-1 WARN engine: File=file:/oracle/product/10.2.0.4/agent10g/sysman/admin/metadata/oracle_ovf_ivr.xml,
line=398: <InstanceProperty> is not valid element, will be ignored
2008-09-12 14:51:56,539 Thread-1 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2008-09-12 14:51:56,643 Thread-1 WARN metadata: TABLE metric uptime can't define table_name: mail_pop_uptime
2008-09-12 14:51:56,644 Thread-1 WARN metadata: TABLE metric debug_usercount can't define table_name: mail_pop_users_list
2008-09-12 14:51:56,644 Thread-1 WARN metadata: TABLE metric connections can't define table_name: mail_pop_connections
2008-09-12 14:51:56,645 Thread-1 WARN metadata: TABLE metric commandcount can't define table_name: mail_pop_commandcount
2008-09-12 14:51:56,646 Thread-1 WARN metadata: TABLE metric spsstats can't define table_name: mail_pop_sps
2008-09-12 14:51:56,647 Thread-1 WARN metadata: TABLE metric usercount can't define table_name: mail_pop_usercount
2008-09-12 14:51:56,647 Thread-1 WARN metadata: Metric usercount does not have any data columns
2008-09-12 14:51:56,647 Thread-1 WARN metadata: TABLE metric socketcount can't define table_name: umsg_pop_socketcount

Installer app runs in Classic, but shouldn't

Hi
I'm trying to install Macromedia (as was) Studio 8 (including Flash, Dreamweaver, etc) on a PMG5 in 10.3.9. The installer CD contains an "Install Studio" application which, on other OS X computers, is a normal, working OS X application. However, on this one machine, it tries to run in Classic. Once Classic launches, I get the error "This application requires OS X" (of course).
I believe the installer is running within Macromedia Flash Player 8, but I can't work out how to force it to open in the OS X environment. The Flash Player is, as far as I can tell, only a browser plugin, and not a standalone application (right?)
I have done the following:
- Repaired permissions
- Uninstalled all previous versions of Flash
- Reinstalled latest (v.9) version of Adobe Flash
- Removed Macromedia Shockwave support files from /Library/Application Support
When I Get Info on the application, "Open in Classic Environment" is unticked.
Any ideas? Thanks!
matt

Thanks guys -
Marlinespike's solution worked. I had to copy all installation files off the CD into a folder on the HD, and run it from there. Strange issue but now I know the solution.
all the best
Matt

Getting agent status running and ready..

Hi
All,
I have OMS 10.2.0.2 on win 2003 and agent 10.1.0.4 on AIX 5.2
Getting status running and ready when I do
emctl status agent..
$ emctl status agent
Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.1
OMS Version : Unknown
Protocol Version : 10.1.0.2.0
Agent Home : /u07/app/oracle/product/10.2.0/moe.wsi.com_OWSIDEV
Agent binaries : /u07/app/oracle/product/10.2.0
Agent Process ID : 405756
Parent Process ID : 356580
Agent URL : http://moe.wsi.com:3938/emd/main
Started at : 2007-10-15 13:55:19
Started by user : oracle
Last Reload : 2007-10-15 13:55:19
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 4318
Size of XML files pending upload(MB) : 40.87
Available disk space on upload filesystem : 35.98%
Agent is Running and Ready
But it doesn't show me anything in upload and OMS version..
Here is emagent.trc file ouput
2007-10-16 08:11:37 Thread-1869 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://wsi8328-1.com:1159/em/upload: re
tStatus=-32
2007-10-16 08:11:37 Thread-1869 ERROR http: snmehl_connect: Failed to get address for wsi8328-1.com: Authoritive Answer Host not
found (error = 1)
and target.xml looks fine it contains all entry for databases.
I don't know why it's not making communication with OMS.
any help will be appreciated.
Regards,
Vishal

What happens, when you issue 'emctl upload' explicitly?
You defined a secure connection (because of HTTPS in the URL) to the OMS host,did you secure the agent? (emctl secure agent). There's another posting about upload problems:
Problem with agent10g upload
Werner

Hi, Can you help me I am running an iMac 10.7.5 and iPad 6.0.1 and a macair10.8.2. iCloud is syncing emails and notes but not photos. Photo streaming is switched on on the iMac. what do I need to do to stream photos?

Hi, Can you help me I am running an iMac 10.7.5 and iPad 6.0.1 and a macair10.8.2. iCloud is syncing emails and notes but not photos. Photo streaming is switched on on the iMac. what do I need to do to stream photos?

Hi you have basicly 2 Options.
1 -if you Switch One fotostream on all 3 devices of yours which are working on the same apple id -all Fotos you Take with your iPad will be synchronized via icloud to the other 2 decvices ( w-lan and battery depending).
2- If you select foots or a whole album in iPhoto on your air or iMac and choose than puplish --> fotostream --> new or existing event you can key in a friends mail. If this friend has iCloud and iPhoto ( for iMac or MacBook ) and click on the link in the email it will download this fotos in the fotostream section in iPhoto. If he has a iPad, iPhone,... It will do it in the foto app and if he doesn't have a iCloud account at all and you choose "public web site" while publishing he can see your fotostream on a website.

When I boot up my system and Firefox is not running, Firefox tells me I must update, but when it begins to do so, it tells me that the program is currently running and that I must turn it off before the update can proceed.

Basically, I don't know any better way to turn it off than to try closing the program or rebooting the computer. Rebooting usually works, as in the following instance which happens occasionally: I close Firefox, move on to another task, and then try to open Firefox again and am told that Firefox is still running and that I must try to close it again or reboot. Trying to close it again is impossible because for all I can see, it is closed. So, I reboot and can then successfully start Firefox. That is a nuisance that I would like to remedy. I was hoping that the update of the program might resolve the problem, but I can't get the update to work, as explained above.

Hello,
I would like to strongly recommend that you update your version of Flash Player to our currently released version (17.0.0.169) and enable auto updates. The version you are using is insecure and opening your computer (and all of your data) to being easily exploited by bad guys.
As for the error you are receiving, this is most likely a restriction from the website. Each developer is able to specify what the required minimum version of Flash and require their users to have at least that version installed. The detection that is occuring and the message that you are seeing on the website isn't part of Flash Player, but instead part of the website's code.
If you go to this page and click the "Check Now" button, what is displayed (OS, browser and version number)? Do you see the "tree" animation playing below?
Flash Player Help
Thanks,
Chris

I am trying to update a number of items which the software check brings up: It runs and says it is installing but at the end I get this error message: The update could not be expanded, and may have been corrupted during downloading. The update wil

Hi,
I am trying to update a number of items which the software check brings up:
It runs and says it is installing but at the end I get this error message:
BUT then I ge tthis:
Can anyone help me to enable the software to update?
Thanks

Thanks. Something isn't right as I just tried to download the iphoto update - it said it had competed the download but then when I clicked on the download item I get this:
Think will have to take it into the store.....
thanks for replying.

I attempt to open a second window from the icon but it does not open then when firefox is closed it will not reopen because it is still running in processes but no window displayed until you kill the process and then restart firefox.

I attempted to open a new window from the Firefox icon but nothing happens. I then went on browsing and closed Firefox but was later unable to open it. I checked processes and it was already running but there was no window displayed. I am running Windows 7 Professional.
This is repeated any time I already have the browser open and wish to open a second instance.

'''<u>Open a second window (not a second tab, that is different) when Firefox is already running and displayed on the monitor</u>'''
*Firefox button > New Tab > New Window
*CTRL+N
*'''''If using the Menu Bar''''': File > New Window
**To '''''temporarily''''' display and make choices from the Menu Bar press the ALT key or the F10 key
**Also see: https://support.mozilla.com/en-US/kb/Menu%20bar%20is%20missing
'''<u>Firefox "hang on exit"</u>'''
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#Why Firefox may hang:
#*[http://support.mozilla.com/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

I try to launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox is not running and restart doesn't work

when I launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox not running and a restart doesn't solve the problem

Download a fresh Firefox copy and save the file to the desktop.
*Firefox 12.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
See also:
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use
*http://kb.mozillazine.org/Recovering_a_missing_profile

I just purchased an IMac with lion and I tryed to install an old math program that is for winmac running systems. When I try to boot the cd it comes up with a notepad window with a bunch of weird symbols and codes but the program will not start up.

I just purchase my first IMac with lion and I was trying to install a math program I bought 6 years ago. When I went to boot it off the disk while following the program instructions a window popped up with a note pad format with symbols and codes but the program would not download or open. How do I get this program to work? It is a mac compatible program by the way.

Your Mac probably does not know with which application to open the file and is opening a file with a text editor that really needs to be opened by the application itself. Try starting the application first, then use the File > open command to open the file.
As varjak paw comments, there isn't a "winmac" so that's not telling us anything.
Note that it is possible that software purchased 6 years ago may no longer run on your computer. Once we know what it is we can help more.

I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? Thanks

I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!

FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing.

Flash not running in FF but runs in IE and Chrome

Hello:
I am having an issue with Flash not running in Firefox but it is running in IE and Chrome. The main url is http://www.mcafee.com/us/campaign/network-security/virtualized-data-center.html on which there is a section called "ROI Calculator". The download button links to a flash program which opens up
in IE and Chrome but does not open in Firefox. I am using windows 7 professional and Firefox 8. Here is the code for the page http://www.mcafee.com/us/resources/roi/brocade-mcafee-tco/roi-brocade-mcafee-tco.html :

<html lang="en">

<head>
<meta name="robots" content="noindex,nofollow">
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<meta http-equiv="X-UA-Compatible" content="IE=EmulateIE8" />
<script type="text/javascript" src="http://s7.addthis.com/js/200/addthis_widget.js"></script>
<script type="text/javascript" src="swfobject.js"></script>
<script type="text/javascript">
function openAddThisWindow(v1,v2,url)
                return addthis_open(this, 'email' );
</script>

<link rel="stylesheet" type="text/css" href="history/history.css" />

<title></title>
<script src="AC_OETags.js" language="javascript"></script>

<script src="history/history.js" language="javascript"></script>

<style>
body { margin: 0px; overflow:hidden }
</style>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body scroll="no">
<script language="JavaScript" type="text/javascript">

</script>
<noscript>
      <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
            id="Brocade_ROI" width="100%" height="100%"
            codebase="http://fpdownload.macromedia.com/get/flashplayer/current/swflash.cab">
            <param name="movie" value="Brocade_ROI.swf" />
            <param name="quality" value="high" />
            <param name="bgcolor" value="#869ca7" />
            <param name="allowScriptAccess" value="sameDomain" />
            <embed src="Brocade_ROI.swf" quality="high" bgcolor="#869ca7" width="100%" height="100%" name="Brocade_ROI" align="middle" play="true" loop="false"            quality="high" allowScriptAccess="sameDomain" type"application/x-shockwave-flash" pluginspage="http://www.adobe.com/go/getflashplayer"></embed>
    </object>
</noscript>

<script language="javascript" type="text/javascript" src="http://www.mcafee.com/common/js/s_code-20110804.js"></script>
<script language="javascript" type="text/javascript">
    s.pageName="corp:en-us:direct:resources:roi:brocade_mcafee_tco";
    s.pageName=s.pageName.toLowerCase();
    s.channel="corp:en-us:direct:resources:roi";
    s.eVar21=s.channel=s.channel.toLowerCase();
    s.eVar22="corp:en-us:direct:resources:roi:brocade_mcafee_tco";
    s.prop1=s.eVar22=s.eVar22.toLowerCase();
    s.events="event1";
    s.prop4=s.eVar4="us";
    s.prop5=s.eVar5="en-us";
    s.prop7=s.eVar7="NA";
    s.prop6=s.eVar6="direct";
/************* DO NOT ALTER ANYTHING BELOW THIS LINE ! **************/
var s_code=s.t();if(s_code)document.write(s_code)</script>

</body>
</html>
Thanks in advance for your help.

Too much text :/ I hate generated source - something always goes wrong and you never know what the hell
What about embedding it yourself?
Create empty HTML file, download swfobject.js: http://code.google.com/p/swfobject/downloads/list
And use this block of code. Of course, change name of swf file, width and height. Unpack swfobject.js right next to the html file.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
    <title>SWFObject dynamic embed - step 3</title>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <script type="text/javascript" src="swfobject.js"></script>
    <script type="text/javascript">
    swfobject.embedSWF("myContent.swf", "myContent", "800", "600", "9.0.0");
    </script>
</head>
<body>
    <div id="myContent">
      <p>Alternative content</p>
    </div>
</body>
</html>

My iTunes is no longer working. I uninstalled and reinstalled but the program won't open and run. I was trying to download an mp3 file last evening and I think something has been deleted that I need to open the iTunes. How do i figure out what is gone

I uninstalled and reinstalled but the program still won't open. I was trying to download an mp3 file last evening. Instead the site tried to install a new audio player. I did not want it so uninstalled it immediately. I think in that process something was deleted that I need for iTunes but I do not know what. How do i figure out what is gone and recover it?
I did try a system restore - but that was not a fix either.

I was trying to download an mp3 file last evening. Instead the site tried to install a new audio player.
Ackk ... that behavior is consistent with the play_mp3.exe trojan:
http://en.wikipedia.org/wiki/Play_mp3.exe
Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
http://www.malwarebytes.org/mbam.php
Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look.

HT1449 I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch). All music is there and playable but will not recognize any devices

I've transferred my itunes library from PC to Macbook pro running latest itunes and now it will not recognize my iPods (nano 4 and 5th Gen an Ipod touch). All music is there and playable but will not recognize any devices. Help please

The ipod is not a backup/storage device.
You need to copy everything from your old computer to your new one.
The Apple store will do this for you, you can call apple support and they will help you, you can use google.

Replacement iphone - trying to restore from backup, but iOS v 6 running and won't update from recent backup

Replacement iphone - trying to restore from backup, but iOS v 6 running and won't update from recent backup. How do I ensure I get all my photos etc onto new phone?
Thanks

If you're old phone that was repalced was a higher version of iOS, it wont be able to restore. Update your iPhone to the lastest iOS 7.0.4 and try to restore it then.

Postfic qmgr running and relaying, but shouldn't be!

Similar Messages

Maybe you are looking for