Postfix does not bind to en0 anymore

Hi all,
I have a Leopard server that runs mail services. All of the sudden postfix does not bind to en0 anymore. Normally postfix will bind to any IP address showing something similar to this in netstat:
tcp4 0 0 *.25 . LISTEN
On my server I only hace postfi listening on localhost like this:
tcp4 0 0 127.0.0.1.10025 . LISTEN
This is although postfix has determined on which IP addresses it should be listening:
postfix: dict_lookup: mynetworks = 127.0.0.0/8,172.16.0.0/24
postfix: mac_parse: 127.0.0.0/8,172.16.0.0/24
postfix: dict_eval: const 127.0.0.0/8,172.16.0.0/24
postfix: inetaddr_listappend: 127.0.0.1
postfix: inetaddr_listappend: 127.0.0.1
postfix: inetaddr_listappend: 255.0.0.0
postfix: inetaddr_listappend: 172.16.0.12
postfix: inetaddr_listappend: 255.255.255.0
postfix: inetaddrlocal: configured 2 IPv4 addresses
postfix: inetaddr_listappend: 255.0.0.0
So why does postfix only binds to localhost? Any hints on that?
Thanks,
Stephan

Oh my… problem solved.
There has been a trailling "inetinterface"/"mynetworks" combo just at the end of the main.cfg that caused this problem.
I wonder if Server Admin has put them there…
Cheers,
Stephan

Similar Messages

  • HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

  • I do not know what happened, all of a sudden Firefox does not want to work anymore. Had been conected to audible. Retried about 4 times.... no luck had to force

    I do not know what happened, all of a sudden Firefox does not want to work anymore. Had been conected to audible. Retried about 4 times.... no luck had to force quit every time. The three Firefox app. into garbage, emptied garbage and redownloaded new version from Firefox. Reinstalled but same thing happened again... no connection.
    What can I do, I like Firefox better than Safari, had it for years on my Mac.
    Please let me know.
    (Note: I have also mentioned this on the automatic response to the malfunctioning).
    '''''Email removed by moderator to protect you from spam'''''

    Hey.
    I think it might be the problem with one of your plugins.
    Try to uninstall the webbrowser AND remove the storage from Firefox in your user-account (Linux: /home/username/.mozilla). You can check the list of installed Add-Ons in Firefox under "Extras => Add-ons" or by pressing Shift + Strg + A (Linux).

  • I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

    I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

    Logic 8 will probably run on your new machine but the installation program contains some older PPC code for pre Intel Macs. This was not a problem as all OSX versions contained the "Rosetta" PPC emulation, that is, up until Lion when all PPC emulation was dropped.
    There are ways to do this however, try searching Google for:  Installing Logic 8 under Lion or Mountain Lion.

  • ITunes store does not accept my Password anymore.

    ITunes store does not accept my Password anymore.

    I'm still having the same problem ... 6 months after your original post!  I've just had to reset my pw 2 days in a row, and I've been through so many resets over the past 6 months that I'm running out of ideas for passwords that I'll have a reasonable chance of remembering.  But I also always make a careful note of my important passwords, and after the 1st "password error" message, I check my list and enter the password very slowly and carefully.  So, I think I'm pretty safe in claiming that neither entering the wrong password nor making a typo is the problem!
    Oddly, though, I could usually cancel the password-reset process, then go right to the the iTunes Store, where my password would work fine, allowing me to open and view all my account details.
    Several months ago, I spent about 45 minutes on the phone with Tech Support trying to get this fixed. He was great and we thought he'd found the problem with my account.  (When I originally set up my iTunes account 6 years ago, I used a different email address than I used when I set up my new Mac last year, and that seemed to be causing some sort of conflict within my account.  Hard to imagine someone might change email addresses sometime over a 6-year period, right?  But apparently, the software designers didn't cover that possibility with one of their recent updates of the master system for customers' accounts -- that's the Tech Rep's surmise, not mine.)
    Everything seemed to work fine for a few weeks, but then the problem started occurring again ... over and over and over ...

  • My blackberry tour does not sync my contacts anymore with outlook 2007. I do not get an error message. Help!!

    My blackberry tour does not sync my contacts anymore with outlook 2007. I do not get an error message. Help!!

    Norton is probably the issue. It can really screw things up, that is one reason I never use it. See if you can temporarily disable it and then try the sync and see if that works.
    On a Mac, there is a way to run a program that repairs permissions for the user, not a Windows thing.

  • My logitech mic does not work with Audition anymore

    My Logitech mic does not work with Audition anymore. I had to reformat my hard drive and re install Audition, it is not working any more, I have test the mic with another software and it work fine. help please.

    Fixed. Switched card into different slot, not sure exactly what made it work, but it does now.
    Go ahead and delete thread if you like.

  • My iPhone 3gs does not sync with itunes anymore after installing Mac Os X Snow Leopard, what can i do?

    My iPhone 3gs does not sync with itunes anymore after installing Mac Os X Snow Leopard (iTunes does not recognize the iPhone anymore) , what can i do?

    Try removing and reinstalling AMDS:
    http://support.apple.com/kb/HT1747
    (I requested deletion of your duplicate post.)

  • IOS4 - Quicktime does not accept Authenticated Proxies anymore

    Hi Guys!
    My wife and I both use a Authenticated UK Proxy over Wifi on our 3GSs from Japan where we live.
    She updated her phone to 4.0 this week.
    Since then, when she tries to read a video stream Quicktime ignores the Proxy settings.
    I did a bit of tinkering and found that anonymous proxies are still working.
    The gripe is with proxies that require authentication.
    So to summarize it, in Firmware 4.0 quicktime does not accept proxies with authentication anymore. It decides to simply bypass them!?!
    That is the weirdest thing I have ever seen.
    We are in a bind because anonymous proxies only last a few hours.
    We have subscribed to a paying proxy, but it only works on my 3.1.3 phone now.
    If anyone has the merest clue of what could be done, I would greatly appreciate their advice...
    Cheers, Moh

    Thank you very much Apple Team for neither acknowledging this post, nor the email I sent to your support team.
    That has blown the myth of Apple's superior customer care for me!

  • Windows 8 does not recognize ipod nano anymore

    Windows 8 does not recognize my iPod nano anymore
    Did so in the past
    Followed all troubleshooting tips on Apple's page
    Any other suggestions

    Hi there catfish1967,
    You may find the troubleshooting steps in the article below helpful.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W. 

  • Safari on iPad does not display GIF image anymore after upgrade to iOS 4.3

    1) Could anybody (especially those in Apple iOS or Safari teams) advise me why the Safari on my iPad cannot display some images (probably in GIF formats) on some webpages anymore, after I upgrade my iPad to iOS 4.3? These images on the webpages can be properly displayed on when my IPad runs with iOS 4.2.1. There should be no problem with these embedded image files because they can still be properly display in Safari running on my Macbook air.
    2) Is there any solution to this problem?
    3) Is it possible to downgrade my iPad back to iOS 4.2.1?

    I am having the same issue with two different ipads (one Wifi and one Wifi-3g) running on our home network (Verizon FIOS). The website in question is www.tvwc.com and the main logo in the upper left corner, a .gif, does not display, only a "?". Other images on the site, in .jpg format, display correctly.
    I was running 4.2.1 and am now just upgrading to 4.3.

  • Alt scroll to zoom does not work in Acrobat anymore, why?

    I used this feature all the time before but it does not work anymore. Why?
    I have Mac OSX 10.10 Yosemite and use a Logitech mouse. Lates versions of all CC-apps.

    Still having this issue after an update...
    I review a lot of architectural drawings, which requires a lot zooming in/out to see details... Up until this last Acrobat Pro (11) update I was able to press option (Mac) and use the scroll wheel to zoom in and out... That convenient feature is now missing... I jacked around with several preferences and Page Display settings with no luck... I am hoping there is a checkbox hidden somewhere that I need to click on... Any clues????
    Thanks...

  • Since updating to Firefox 22 Twitch.tv does not load the player anymore

    I just updated to Firefox 22 and no Twitch.tv's player simply does not load anymore. Just a black rectangle where the player is supposed to be and if I rightclick in that area, I get the same context menu as everywhere else, meaning that the player definitly did not load. Youtube works fine though.

    This gotta be the worst ff upgrade ever, every single thing breaks

  • FMS 4.5 on Linux does not bind to 1935, 80

    1. I've installed FMS on OpenSuse 11.4 64 bit, I know that according to the requirements it is not recommended distribution, but common opensuse is very modern and complete.
    2. During the installation I had to make a link @libcap.so.1 into the directory where installFMS script was present (because installer says that there is no libcap library which is not true)
    3. Completed the installation without installing apache (I have apache on this machine but disabled -> free 80 port)
    4. I have left default configuration (regarding user, group, ports: 80 & 1935 + 1111, added the admin user)
    5. I started the server with the command ./server start
    6. My htop shows:
    - several processes ./fmsadmin -console -conf ./conf/Server.xml
    7. I can connect to the server using the administration console on my localhost. The server is installed on host 192.168.0.160 (local network), I can connect to the server using credentials given earlier
    8. I can not connect to the rtmp service or rtmpt service
    I am using:
    rtmp://192.168.0.160/vod/
    or
    rtmp://192.168.0.160/vod/sample1_500kbps.f4v
    or
    rtmp://192.168.0.160:1935/vod/
    or
    rtmp://192.168.0.160:1935/vod/sample1_500kbps.f4v
    I always receive: NetConnection.Connect.Failed.
    I have run the command:
    netstat -tulpn
    it only shows ports:
    127.0.0.1:11110  ...   XXX/fmsadmin
    0.0.0.0:1111     ... XXX/fmsadmin
    it does not show anything related to ports 80 or 1935, 19350
    additionaly I have found the following entry in the logs: (master.00.log):
    2011-12-16
    15:01:20
    15013
    (i)2581224
    Edge (15768) started, arguments : -edgeports ":1935" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1".
    2011-12-16
    15:01:25
    15013
    (i)2581226
    Edge (15768) is no longer active.
    2011-12-16
    15:01:25
    15013
    (w)2581255
    Edge (15768) _defaultRoot__edge1 experienced 1 failure[s]!
    2011-12-16
    15:01:25
    15013
    (i)2581224
    Edge (15769) started, arguments : -edgeports ":1935" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1".
    Thanks in advance.

    I have found the solution:
    I had symlink: @libcap.so.1 in the setup directory only. Now i have created symlink in the directory where the server (fmsmaster) is running and the port now binds.
    I have run the proces (from the command line):
    ./fmsmaster
    and it shows:
    /opt/adobe/fms/fmsedge: error while loading shared libraries: libcap.so.1: cannot open shared object file: No such file or directory
    So please Adobe:
    you SHOULD ALWAYS put failure messages into the log files. It is a shame that such mature product does not have proper error reporting. This could save hours of your clients time.

  • My iphone does not make back ups anymore. It says that my i-cloud password is wrong. When it clearly is not. What can i do about it?

    My phone doesn't make back -ups anymore. It says my password is wrong, when clearly that's not the case. Can any one tell me how i can solve this?

    You will need the correct email address and password. Try signing on to iCloud on web browser. https://www.icloud.com If that does not work then you do not have the correct credentials regardless of what you think.

Maybe you are looking for