Postfix doesn't work for all email address

Hi,
I just installeled postfix and it worked well when I send emails to servers like gmail.
However, when I send to outlook exchange servers, the command executes successfully but the email doesn't reach its destination.
Any idea why?

What's in the logs?

Similar Messages

  • "Move Current Track Automation Data to Region" doesn't work for all

    I have been using the 'Move Current Track Automation Data to Region' and while it works fine for some types of automation data like channel volume, pan and some plugin parameters, it doesn't work for all of them.
    I haven't done exhaustive research into which parameters work and which don't, but most of the parameters for individual voices within Ultrabeat don't - which is annoying as that is what I was trying to use it for.
    Any ideas about this, or workarounds?

    OK, well an update on this in case anyone's interested.
    With some further experimentation I have discovered that this problem did not exist in Logic 7 - ie you can move current track automation data for individual Ultrabeat voices to the region.
    It's also possible to move automation data for individual Ultrabeat voices using 'Move All Track Automation Data to Region,' so I suppose this is a kind of workaround, though it can be annoying if you don't want to move all track automation data.
    I'm now assuming this is a bug in Logic 8; is there any way to convert a Logic 8 project to work in Logic 7, as this along with the touch tracks bug is making working in Logic 8 very frustrating?

  • Creativ Cloud for Teams doesn´t work for all members

    Why do the products work for all members except oe? The test version is started here.

    Hi YES-2013,
    Welcome to the Community!
    The Team subscription is fine and everyone should be able to use a full version of the software's, ask him to uninstall & re-install the Adobe Creative cloud desktop application and if that doesn't work then contact our Adobe support via http://www.adobe.com/support/download-install/supportinfo/ and they will help him further.
    -Ankit

  • Email notification works for one email address fails for another

    Hi,
    I have OEM 10.2.0.3 - one email address works fine, but another fails with message
    [email protected]: Test failed with message: "E-mail Address is invalid: Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay"
    Now the weired thing is, that using the same SMTP gateway, I can send emails ok to this address via outlook etc.
    Anyone any ideas ? The xxxxxxxxxx in the address is actually a mobile number, but, as I say, it IS valid.
    Cheers

    Thanks for the reply, however, this is what I dont understand.
    The SMTP server is the same one I use for our email, ie, it is our exchange server, and from outlook, I am able to send email
    to the same address that is failing with EM. I'm not aware I need any authentication, or how it would need authentication only
    for external accounts ?
    you are correct howver, that it is an external account, and the same test fails for any external account. I'm just not sure how to fix this ?
    A manual session connecting to the SMTP server is as follows
    telnet smtp_server_name.com.au 25
    Trying 192.168.6.2...
    Connected to smtp_server_name.com.au (192.168.6.2).
    Escape character is '^]'.
    220 smtp_server_name.com.au Microsoft ESMTP MAIL Service ready at Fri, 5 Sep 2008 15:38:00 +1000
    helo
    250 smtp_server_name.com.au Hello [192.168.6.15]
    mail from: [email protected]
    250 2.1.0 Sender OK
    rcpt to: [email protected]
    550 5.7.1 Unable to relay
    quit
    221 2.0.0 Service closing transmission channel
    Connection closed by foreign host.
    $

  • Exported UTI doesn't work for all account

    Hello,
    We have a QuickTime component that permits to play files with our video codec. These files also have a specific extension.
    It works fine with QuickTime 7 that allows "anything" content type. But on Snow Leopard, with QuickTime 10, we can not open file with our private extension. When we open QuickTime, our files are in grey and we can not click on it.
    What I've done is to export an UTI from my application info.plist file. This export says that my UTI with the right filename extension is conform to "public.movie". I have done it from the original admin account of the machine.
    What is strange, is that this modification has an impact on the others accounts I have created (standard or admin) but not on this original admin account.
    I mean, on the others accounts, the files with our extension are well seen as movie file and can be played with QuickTime Player. So the Uniform Type I export is well interpreted when I log with a different account.
    I do not understand what is wrong with this original account. The behavior is also the same if I am loged as root.
    I have made a repair disk permissions but it didn't change anything.
    Right now I don't know what to do in order to have this export to work for this particular account...
    Thanks in advance for your help,
    Loïc

    Use Quicktime 7 on the Snow Leopard Computers to playback this video. On the Snow Leopard computer quicktime 7 should be in the Utility folder. If not download Quicktime 7 for Snow Leopard:
    http://support.apple.com/kb/DL92
    If some reason you can't download Quicktime 7 here how you can install it from the Snow Leopard installation disc:
    http://support.apple.com/kb/ht3678#1
    Scroll to the top of the page for instruction on how to install Qt 7.
    Quicktime X can't playback all video formats/codecs. It's limited to a few so use Qt 7.

  • Hide function in Login Items doesn't work for iChat and Address Book app.

    There is a problem with the hide function for iChat and Address Book application in Login Items. If you go to System Preferences, click on Login Items, add the iChat and Address Book application to the Login Items, activate the hide function for iChat and Address Book application and restart your Mac iChat and Address Book application will start with opening a window. Normally this shouldn't happen if the hide function in Login Items is activated for iChat and Address Book application.
    Message was edited by: Roman Patrice Gego

    Hi,
    Your link refers to changes to 10.6.3 prior release as tested by Developers.
    The numbering system tells us that. (Build 10Dxxx).
    Therefore it is an Update and not an Upgrade, therefore no-one is going to get charged.
    If the article is the so called Release Notes then they mention nothing about correcting any issue with Login Items Hiding.
    If you think an issue is being missed there is a place to report that, from this icon view list http://www.apple.com/feedback/ which includes Hardware and Software.
    I personally have not tested Login Items Hiding as I tend to think there is no point in having an App open if it not on the Desktop.
    As Kappy pointed out there was little progress on a similar issue with Leopard.
    This could be interpreted that Apple feel that the issue does not effect enough people or that other issues are more important.
    As anyone and everyone can report Issues and contribute their ideas to the OS and it's improvement via the Feedback links it would seem to be a question of enough people bringing it to Apple's Attention.
    I would tend to work on Issues that stopped an App functioning first, linked with integration with the OS and any changes to the major parts of it such as a Quicktime.
    Lesser issues that maybe more cosmetic in appearance would tend to fall down my list of things to do.
    Presumably Apple have a grading system on such things that may not fit with either of our views.
    As Apple don't reveal any details about the OS Updates or even Upgrades then anything any of us think we interpret as a pattern is just that - an interpretation.
    Consequently anything we say on the subject is then likely to be seen as speculation under the Terms of Use of these Boards.
    8:28 PM Sunday; May 9, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Flash Player doesn't work for all accounts

    I am having a problem like others as described in this topic:
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1262196&enterthread=y
    Namely, Flash Player works fine for my main administrative
    account, but does not work for my other accounts (I am running
    Windows XP Home Edition). As suggested in the above topic, I have
    tried uninstalling Flash (for all users) then re-installing it.
    This did not help. The above topic also suggests that my registry
    may be corrupted and referenced the following technical article for
    a solution.
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fb1634cb
    That article instructs you to use a Microsoft download called
    SubInACL to repair the registry. However, the article specifically
    states "Note: Do not run the Microsoft SubInACL tool on Windows XP
    Home. This tool should only be used with Windows XP Pro". So it
    will not help me since I'm running XP Home Edition.
    Is there any solution to the corrupted registry problem if
    you're running XP HomeEdition?

    I had the same problem none of that works...
    This is what I did:
    Using the adm profile, go to the windows folder, find the
    regedit icon, open it, then scroll all the way down until you find
    the shockwave files. Right click on each and the click on
    permissions, give each user persmission and do it for all the
    shockwave flash floders you see, it should be about 9.
    good luck.
    need help call me 305 228 7574, EST until 10pm.

  • Preview search doesn't work for all ASCII characters

    The title pretty much says it all. The behavior is completely broken. Any searches for words that contain a non-letter, non-number ASCII, non-standard punctuation character, e.g., @#$%^&*()+, kind of ignores the special characters. For example:
    Find: C++
    Finds all pages with the text "C++", but doesn't highlight that text. Instead, it highlights all "C" and "c" characters, and the find counts for those pages are the number of C characters. Note that it neither highlights nor counts C characters on pages that don't contain "C++"
    Find: "C++"
    Finds about half the pages and the find count is correct, but it highlights only C characters that are followed by ++ OR other special characters, e.g. it highlights the C in "C#".

    mentalwasteland wrote:
    I simply want it to work as the documentation says it works.
    By all means tell Apple it does not perform according to their documentation when you ask them to fix it.
    Does Adobe Reader do any better?  I don't know if it might have its own search system....

  • HT1391 "File Get Info" doesn't work for all items in iTunes.

    I have some iTunesU videos where the Get Info is grayed out (not available).How do I find out where these files are located on my system? (Mac OS X).
    Thanks,
    Chris.

    Try to update iTunes.
    Or - Remove iTunes from your system, download from https://www.apple.com/itunes/download/
    And install.
    In simple words (reinstall iTunes)
    i guess you have updated Yosemite not clean install.
    Anyway, for me updates not worked 100% stable. i always do clean install and this is the best way to go, only problem is that there are no official way from apple to make a bootable drive - all the time this is big problem...

  • I've blocked anonymous but it doesn't work for all: unavailable, no name, etc

    It appears this question has been asked numerous times, but there is no response from Verizon. What's the deal here? I don't want to call Verizon because when I do, I'm inundated with calls from them, which I'm trying to decrease not increase. Honestly, Verizon reminds me of an ex who takes a break up badly, and I don't want to encourage continued calls, but I need to know how to stop this.

    mgsee wrote:
    It appears this question has been asked numerous times, but there is no response from Verizon. What's the deal here? I don't want to call Verizon because when I do, I'm inundated with calls from them, which I'm trying to decrease not increase. Honestly, Verizon reminds me of an ex who takes a break up badly, and I don't want to encourage continued calls, but I need to know how to stop this.
    It does work.  The problem is that anonymous call rejection doesn't do what you want it to do!    ACR blocks calls from people who withhold their telephone number by entering the ACR code on their phone.  "Unavailable" and "no name" callers have not used the ACR code to block their telephone number, so the call comes through.   It's a loophole in the regulation and there is no way for the consumer to get around it.
    If you feel motivated enough, a letter to the FCC or your congressman asking them to fix the loophole is your best recourse.

  • Setting Look & Feel - doesn't work for all components...

    Hi there.
    I'm setting the L&F in my application
    (UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());)
    For some strange reason two comboboxes still have the default L&F - all other components switch as expected.
    Anyone ever encountered such a problem?

    There is currently only one delegate distributed for the JSpinner class -- the BasicSpinnerUI class. Ideally, there would also be MetalSpinnerUI, WindowsSpinnerUI, and MotifSpinnerUI classes also available, but, until they are, JSpinner's are going to look the same regardless of the look and feel specified.
    I submitted this as a bug report to Sun several months ago and should be visible on the Bug Parade as bug 4449972.
    On the other hand, I have thought about writing my own delegates for this class. If you're interested in collaborating on such a project, let me know at [email protected]
    Shaun

  • Spelling again | Multilingual doesn't work for all languages

    Hello,
    I am writing e-mails on a daily basis in different languages (English, German, Spanisch, Russian, and French).
    And, of course, I have set my Mail spelling checker to <Multilingual>. It works just fine with the first three languages. But it “doesn't know” the french words. Neither checks it the russian words at all...
    If I turn <Francais> on, then it works, but the other languages don't (of course).
    Have you guys an idea???
    Thanks!
    PowerBook G4 12   Mac OS X (10.4.2)  

    And, of course, I have set my Mail spelling checker
    to <Multilingual>. It works just fine with the first
    three languages. But it “doesn't know” the french
    words.
    Seems like it should know French. Is French on your list in system prefs/international/languages? If not, use the Edit button to add it.
    Neither checks it the russian words at all...
    OS X has never come with a Russian spell checker.
    Some other info of possible use:
    http://m10lmac.blogspot.com/2007/01/spell-checking-in-other-languages.html

  • Headphone Jack doesn't work for all headphones

    I don't have apple haeadphones anymore and I realized that not all headphones work on my ipod4. I have to turn my headphones to a certain angle to get them to work all the time. help?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem. However, from your description you have a bad headohone jack.
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • Contact form doesn't work with some email addresses

    My contact form was working fine until a few weeks ago, now it won't work with the e-mail address I was using. I have tried different address some work some don't , what gives here.
    For what I'm paying I should not be having this problem.

    Please find a similar discussion here and try the suggestion mentioned :
    http://forums.adobe.com/message/6304524#6304524
    Thanks,
    Sanjit

  • Since downloading the iOS5.1 software to a 4th Gen ipod Touch Facetime doesn't work for all contacts. Any ideas?

    When trying to facetime a contact (which worked prior to update) it says that person is 'unavailable for facetime'. Some contacts work and some don't. Facetime is enabled in settings.
    Also can message some people but not others - not necessarily the same people that can't be facetimed.
    Anyone experienced similar or got any ideas?
    Thanks.

    No, just some of them. Tried getting them to facetime my daughter which worked, but still couldn't facetime back.

Maybe you are looking for