Postflight add user privilege to current user
hallo..
i'm new be in mac develop..
in this case i wanna add current user privilege in a folder using postflight after i'm install my application from packagemaker
i really don't know about postflight..
please give an example.
thanks..
sorry my english bad..
Hi,
1) very first i wana to know how to give 1 particular schema privilege for example scott schema .. to multiple users (not only access the tables privilege) the complete connect role to multiple users.Refer to : http://download.oracle.com/docs/cd/B28359_01/network.111/b28531/authorization.htm
2)second which users having which schema's connect privilege ..SELECT * FROM dba_role_privs WHERE granted_role='CONNECT'
- Pavan Kumar N
Similar Messages
-
Calendar Server - Unable to add users
When I try to add users to a node I get an error message like:
Working please wait...
unidsattach failed, see /users/unison/log/unidsattach.log, Error Code =
0x13205
Add user [uid=ttesting,o=Airius.com] to node: failed
Add user(s) to node completed.
<P>
This means that the Calendar Server is unable to communicate
properly with the Directory Server. There are some Calendar-specific
entries and an ACI that are added to the Directory Server when a node is
created. These are critical to the proper functioning of the Calendar
Server. This error may mean that they are missing.
<P>
You can also check the access log file of the Directory server to see what
the problem may be. If you see entries like:
[27/Jan/1999:07:39:47 -0500] conn=1 op=2 SRCH base="o=Airius.com" scope=2 filter="(nsc
alxitemid=15000:00001)"
[27/Jan/1999:07:39:47 -0500] conn=1 op=2 RESULT err=0 tag=101 nentries=0
This indicates that 0 entries were returned for the search on the SYSOP
Calendar user.
<P>
If you have recently imported data into your Directory Server, it is likely
that these entries no longer exist. An import to a Directory Server does
not append data; it replaces the current directory with the data in the
LDIF file being loaded. You will need to recreate this Calendar information.
Export your directory to an LDIF file and review the output to see if these
entries exist.
<P>
Here is a boilerplate that may be useful if you don't have a backup copy
of the original LDIF. Try replacing the baseDN (o=Airius.com) and the node
id (15000) to match your Calendar configuration. The password is "password".
The following is for illustration purposes and may not fix all problems:
aci: (target ="ldap:///o=Airius.com")(targetattr = "*")(version 3.0
; acl "Untitled"; allow (write, add , delete ) groupdn = "ldap:///cn=Cal-A
dministrators-15000, o=Airius.com" ;)
dn: cn=Cal-Administrators-15000, o=Airius.com
cn: Cal-Administrators-15000
objectclass: top
objectclass: groupofuniquenames
uniquemember: nsCalXItemId=15000:00001, o=Airius.com
uniquemember: nsCalXItemId=15000:00002, o=Airius.com
uniquemember: nsCalXItemId=15000:00003, o=Airius.com
uniquemember: nsCalXItemId=15000:00004, o=Airius.com
uniquemember: nsCalXItemId=15000:00005, o=Airius.com
uniquemember: nsCalXItemId=15000:00006, o=Airius.com
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140113Z
modifytimestamp: 19980501140113Z
dn: nsCalXItemId=15000:00001, o=Airius.com
objectclass: top
objectclass: nsCalAdmin
nscalxitemid: 15000:00001
sn: SYSOP
userpassword: {SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g=
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140114Z
modifytimestamp: 19980501140114Z
dn: nsCalXItemId=15000:00002, o=Airius.com
objectclass: top
objectclass: nsCalAdmin
nscalxitemid: 15000:00002
sn: CWSOP
userpassword: {SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g=
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140114Z
modifytimestamp: 19980501140114Z
dn: nsCalXItemId=15000:00003, o=Airius.com
objectclass: top
objectclass: nsCalAdmin
nscalxitemid: 15000:00003
sn: STREAMOP
userpassword: {SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g=
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140114Z
modifytimestamp: 19980501140114Z
dn: nsCalXItemId=15000:00004, o=Airius.com
objectclass: top
objectclass: nsCalAdmin
nscalxitemid: 15000:00004
sn: FOREIGN
userpassword: {SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g=
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140114Z
modifytimestamp: 19980501140114Z
dn: nsCalXItemId=15000:00005, o=Airius.com
objectclass: top
objectclass: nsCalAdmin
nscalxitemid: 15000:00005
sn: SYNCH
userpassword: {SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g=
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140114Z
modifytimestamp: 19980501140114Z
dn: nsCalXItemId=15000:00006, o=Airius.com
objectclass: top
objectclass: nsCalAdmin
nscalxitemid: 15000:00006
sn: HOLIDAYOP
userpassword: {SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g=
creatorsname: uid=admin,o=Airius.com
modifiersname: uid=admin,o=Airius.com
createtimestamp: 19980501140114Z
modifytimestamp: 19980501140114ZProbably in the next couple of weeks, we are releasing beta-2.
Kumar
Jim Clark wrote:
>
thanks, how often is there a beta refresh?
Jim
"Kumar Allamraju" <[email protected]> wrote in message
news:[email protected]..
Jim,
I do not see this problem in the latest source line.
Probably I'm running a WLS server that is slightly newer than the beta,
so maybe
some things might have been fixed.
Kumar
Jim Clark wrote:
I was able to add users and groups through the "console" app, but I was
unable to add users to the groups. After I added a user "jim" and a
group
"clark", I tried adding "jim" to the "clark". It just said "Addeduser...",
and this, "Members: (none)".
Jim -
AppServer: problems trying to add users to roles in security dialog
I'm trying to learn J2EE using AppServer. My current example has a client accessing
an entity bean. I want two classes of user - Reader, and Updater. Most methods
of Home and Remote are accessible to both classes, a few are restricted to users
in Updater role. I'm currently having problems adding users to roles in deploytool.
I have defined users using the Admin client.
I have implemented and test run client and entity bean without security restrictions, it works.
I have defined roles associated with the application.
I have allocated roles to every method in Home and Remote interface of bean.
I have extracted the generated XML file and checked the <assembly-descriptor> section and
it appears that all roles and role descriptions are defined as required.
deploytool lets me use the "Security Role Mapping" dialog, I can select either of my roles and
try "Add user to role" - subsequent dialog shows my users and allows me to "Map user to role" -
but selected user does NOT appear in the user names panel.
What am I doing wrong or what am I omitting? Hints please!Thanks for suggestions. (I'm using Windows so file-protections pretty
non-existent).
I looked in the Sun file you mentioned and found the users were defined.
When I restarted AppServer and deploytool, the users were shown in the appropriate
panel.
There is probably some minor bug in deploytool that causes the User Panel not
to be updated as it should be after a user has been added to a role. -
How to add User Permissions to form created in InfoPath 2010 created for SharePoint document Library
Hi,
I created a form in InfoPath 2010 with three views (one for user input, the other two views to be used by supervisors) and published this to a SharePoint 2010 document library. Now the way this form is supposed to work is that when a User goes to the document
library and adds a document, it is supposed to open the Form with the User's input view. When the User submits the document, only him/her should be able to open and possibly edit the the form. When the Immediate Supervisor opens the form, it should open in
the Supervisors view and allow them to fill in only their section and not be able to edit or alter the user's data. When the Immediate Supervisor saves the document, the Over-all Supervisor should be able to open it in their view and not be able to edit or
alter the sections filled out by the User and Immediate Supervisor.
How would i go about completing this? I have the views created but now have the problem of associating these views with their respective users or groups.Hello,
You need to first create user group in sharepoint site then add user in group according to their role. Later you need to call usergroup.asmx web service to get current logged-In user group name so you can switch view and also apply rule for editing or disabling
controls in form.
Follow this link to get group name:
http://social.technet.microsoft.com/wiki/contents/articles/13271.sharepoint-2010-extracting-user-group-of-current-login-user-in-infopath-2010.aspx
http://social.msdn.microsoft.com/Forums/en-US/018f5184-5c83-4a53-b66b-8c376fc800fc/how-to-get-current-users-sharepoint-group-name-sharepoint-2010-infopath-2010
To apply rule on control:
http://office.microsoft.com/en-in/infopath-help/add-rules-for-performing-other-actions-HA101783373.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
How to Implement Add User Functionality in ADF
Hi,
I already setup my web app to use ADF security and the sample user's and groups that I have created in jazn-data.xml is already
functioning as expected.
I just need to add the functionality on how to programmmaically add user in my weblogic internal LDAP realm
and assign them to the currently configured user groups.
This would be available to Admin Level user.
Anybody has good site or link on how to accomplish this in my ADF Web Application?
Thanks
JDEV 11G PS3Hi Arun,
Jdev Version 11.1.1.6.0
I have one table already created in a hosted db.It has some columns namely Component,Manager,%CodeCoverage,TotalLines,Covered Lines.One manager has 5-6 components under him.
What I want is to have a table having manager name and if I click on manager,it should show components under him with all the details mentioned above.
I wanted to achieve it through tree table but don't know how to proceed -
How to add users from person or group field in a sharepoint list to sharepoint group
Hi,
How to add users(single or multiple) from person or group field in a sharepoint list to sharepoint group programmatically?
Any suggestions would be appreciated.
Thank you,
AA.Hello,
Use SPGroup.AddUser() method to add user in group. I have just written sample code in notepad so it is not tested:
SPSecurity.RunWithElevatedPrivileges(delegate()
using(SPSite Site = new SPSite(SPContext.Current.Site.Url))
Using(SPWeb Web = Site.OpenWeb())
SPList list = web.Lists["ListName"];
SPQuery query=new SPQuery ();
query.Query = "<Where><Eq><FieldRef Name='Title' /><Value Type='Text'>Test</Value></Eq></Where>";
SPListItemCollection items = list.GetItems(query);
if(items.Count > 0)
foreach(SPListItem item in items)
//Get USers from person or group column
SPFieldUser userField = (SPFieldUser)item.Fields.GetField("Users");
SPFieldUserValueCollection userFieldValueCollection = (SPFieldUserValueCollection)userField.GetFieldValue(item["Users"].ToString());
SPGroup spGroup = spSite.RootWeb.Groups[groupName];//group name
if (users.Count != 0)
bool isUserInGroup = false;
foreach (SPFieldUserValue user in users)
foreach (SPUser item in spGroup.Users)
string itemUserName = item.LoginName;
string UserName = user.User.LoginName;
if (itemUserName == UserName)
isUserInGroup = true;
break;
if (!isUserInGroup)
spGroup.AddUser(user.User);
The above code will query list item and then get users from "Users" column. Now it will check whetehr user is already in group not, if not then add user in group.
http://rajanijilla.blogspot.sg/2012/09/add-users-to-group-programmatically.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Dear All,
We are currently using SAP88 PL21. Is there a way we can add user query to cockpit? For SAP screen that we can see from main menu, I use drag and drop to add them to common function. But for user query, I didn't find any way to add to cockpit. Thanks.
Regards,
YukaHi Yuka,
1.Goto Tools --> Cockpit -->Enable my cockpit
2.Administration -->System Initialization>General Setting -->Cockpit(Select Cockpit option)
3.Make a new Dashboard download Dashboard Design (Xcelsius) from SAP portal
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6091ffdd-e1ad-2d10-359f-d644ff7eaa4e
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6091ffdd-e1ad-2d10-359f-d644ff7eaa4e?QuickLink=index&overridelayout=true
4. you should download Dashboard packaging wizard from SAP portal for make new package(zip file) in SAP .
[File Deleted Oct 2013]
after download tool goto -->Tools -->Dashboard packing wizard(Select) and use or select your xcelsius file to make new package
5.there are also same sample package in the portal so you can use directly import zip file from
Administration -->Setup -->General -->Dashboard manager
6.After import dashboard by 5 step ,select widget gallery in Cockpit tab(Modules,Cockpit and Drag & relate option) then select last form dashboard ,hold and drag on the main windows center.
7.select setting option then it will list you all dashboard package which was import in 5 step.
8.Now selected dashboard which you want to show and select OK.
9.you also need IIS installation in your system.
Thanks
Srujal Patel -
How to programmatically add users to WLS 7
Is there a way to programmatically add users to Weblogic 7? I'm building up a website
and want to give my visitors an opportunity to register with the site.
The code samples I found until now are not working
cheers,
michaelHi Guys,
I too am looking for an answer to this very question. I too want
users to be able to register and also be able to control access
to the site based on the roles being assigned. So what I would
like to do is create users and assign them roles so that the
roles defined within web.xml could be used to control access to
various parts of the site.
Regards
Vijesh
"Brian Pontarelli" <[email protected]> wrote:
>
I had the same exact question. I would like to add users programmatically
to the
weblogic server and also programmatically control the authorization and
authentication policies for these new users. Is this possible in WLS
7.0?
Previous interfaces for this type of thing are deprecated (mostly in
the Realm
stuff). There do seem to be some MBeans in the weblogic.management.security
packages, however these are not accessible MBeans because they do not
extend
from WeblogicMBean and therefore can not be looked up via the
weblogic.management.Helper class. Is there another way to get at the
current
implementation of these interfaces?
Ponch
"Michael" <[email protected]> wrote in message
news:[email protected]..
Is there a way to programmatically add users to Weblogic 7? I'm buildingup a
website
and want to give my visitors an opportunity to register with the site.
The code samples I found until now are not working
cheers,
michael -
Add user comments AXF TaskList
Is there a way to add user comments to the AXF TaskList webtool? Currently the comments are sitting on the TaskViewer within the webtool. However this requires users to actually view a task on the Task List in order to access the Task Viewer which contain the comments at the bottom of the page. Is there a way to integrate the comments into a column that would be paired with the comments corresponding Task Number. I know in 11G this can be done easily. My company however is using 10G. I am trying to do this without modifying the BPEL Processes, I want to try and do it by modifying the JSP and Java files that make up the Task List.
If you want to comment on Yosemite, go to the App Store and select the Yosemite link which is likely still in the Top Free list.
You can then leave feedback there that everyone can read. -
Org Tech Admin can add user from other org?
We are currently on a trial run with CIAC, and I am testing User Management with a Organization Tech Admin account (OTA).
To my suprise, when adding user and select "existing user", I can see every account currently on Cloud Portal, and even successfully add user from other organization to my orgnization.
Is there anyway so that OTA can see only the users in their own organization?I've been able to remove the admin role from a site administrator with an OTA.
I know there are issues when you log with an user then logout and relog with another user, CIAC considers that you are still the previous user (I've encountered the issue several times in portlets in the nsapi requests). I don't know if/how those issues are related, but I'd say that logout/login issue were an user has the same rights than the previous users should be fixed.
Changing OTA rights will not change that particular issue.
For the moment, what we've done is create our own servlet for requests to the sql DB, and our own roles for most services.
Let's see what v4 has in store for us. -
Active Directory and 10.8 Server: Can't add users
I would be most appreciative of any help you folks can give a Mac user at a predominantly Windows/MS/Exchange Tier I university.
I bought a MacMini to act as the departmental File server to allow a granular level of permissions on folders for faculty, administration, residents and students. The students and residents rotate in yearly or for 2 years at a time.
The problem has become when I try and add users from the IT ActiveDirectory domain. The IT folks set-up the DNS, gave it a static IP address etc. all correctly.
The MacMini was also bound to AD in Sys Prefs > Users & Groups > Login Options > Network Account Server to the domain.
There are over 200,000 users in the university system. When I try and search for a user in the Users sidebar it pulls up a completely random list of users and lists "500+ users" next to the buttons. When I try and search for a user, invariably it fails. Furthermore, there is the term "Not Allowed" next to the names of all the random AD users.
What am I doing wrong?
The Sys Admin guy I spoke with said the only way he could figure it out was to go to Groups sidebar, create a new group and add the user that way.
The whole premise for this is to allow the users the same login ID and PWD they do for every other service on campus. That's it. I then want to be able to control folder permissions directly on the MacMini. Is this possible or do I need to use Open Directory in conjunction with AD?
Any help for this formerly Apple Power User would be greatly appreciated.
Thanks folks.Hi
This is a Jabber-ism I think.
You get this if you are using UDS and the users you are trying to add aren't CUPS-enabled.
You probably also get it if the users are from LDAP and aren't CUPS enabled.
CUPC by comparison allows manual contact creation as well as adding of non CUPS people.
Regards
Aaron -
System Image Utility / Automator Add User Account no default shell
I've noticed when creating a customized netrestore flow in System Image Utility for Yosemite, the result of the "Add User Account" action is a user missing a default shell. Noticed this when terminal kept closing as soon as it was opened. dscl -create localhost /Local/Default/Users/USERNAME UserShell /bin/bash fixed the issue but is obviously undesired for provisioning new computers. Any ideas how to configure a default shell for new users created in this way?
Solved by ensuring the add user account action immediately follows the define image source action.
-
HELP: I can no longer add users to my external hard drives
Sorry for the duplicate, someone hacked my other account.
So here's the skinny, I was following some instructions on here to remove the "unknown user" from the list of users that was attached to my Hard Drives.
Path: System Preferences/Users and Groups/Login Options/Join/Open Directory Utility/Directory Editor.
Under Users from the pulldown I deleted "Unkown User" Now I am unable to add users to any of my external hard drives via Sharing under System preferences. When I click the + it will let me select a user, but when I click the select button it will not add that user to the list. It remains blank.
I've tried reformatting one of the hard drives, and a re-boot. Still am unalbe to add users.
Please help!here is a copy of the disc utility log....laila is the name of the extrenal hd i was able to use successfully last.
2012-07-04 08:10:34 -0400: Disk Utility started.
2012-07-04 08:17:58 -0400: Preparing to erase : “LAILA”
2012-07-04 08:17:58 -0400: Partition Scheme: Master Boot Record
2012-07-04 08:17:58 -0400: 1 volume will be created
2012-07-04 08:17:58 -0400: Name : “LAILA”
2012-07-04 08:17:58 -0400: Size : 160.04 GB
2012-07-04 08:17:58 -0400: File system : MS-DOS (FAT)
2012-07-04 08:17:59 -0400: Unmounting disk
2012-07-04 08:18:02 -0400: Creating the partition map
2012-07-04 08:18:03 -0400: Waiting for the disks to reappear
2012-07-04 08:18:03 -0400: Formatting disk3s1 as MS-DOS (FAT) with name LAILA
2012-07-04 08:18:04 -0400: 512 bytes per physical sector
/dev/rdisk3s1: 312505472 sectors in 4882898 FAT32 clusters (32768 bytes/cluster)
bps=512 spc=64 res=32 nft=2 mid=0xf8 spt=32 hds=255 hid=2 drv=0x80 bsec=312581806 bspf=38148 rdcl=2 infs=1 bkbs=6
2012-07-04 08:18:04 -0400: Mounting disk
2012-07-04 08:18:06 -0400: Erase complete.
2012-07-04 08:18:06 -0400:
2012-07-11 15:48:08 -0400: Disk Utility started.
2012-07-11 15:48:42 -0400: Eject of “Unattached Disk Image” succeeded
2012-07-11 15:48:42 -0400: Eject of “Flash Player” failed
2012-07-11 15:59:10 -0400: Disk Utility started.
2012-07-11 16:00:51 -0400: Disk Utility started.
2012-07-11 16:02:19 -0400: Disk Utility started.
2012-07-12 23:22:04 -0400: Disk Utility started.
2012-07-13 09:13:52 -0400: Disk Utility started.
2012-07-13 09:20:22 -0400: Disk Utility started.
2012-07-13 09:45:11 -0400: Disk Utility started.
===== Friday, July 13, 2012 9:47:15 AM Eastern Daylight Time ===== -
Hi all
I found
this post that explains the same issue I'm having, but the marked answer isn't relevant to my environment. I've built a user creation runbook, using 2012 R2 and this
Active Directory Integration Pack. Everything works properly, except I'm getting strange security log events when using the Add User to Group activity.
In one of the tests, I added a single user that was being created to about 100 different groups. Let's say one group has 50 members. When the user gets added to that group, the security audit shows that 50 users were removed from the group, and then those
50 users were added back plus my new user. It shows this activity for every group that the user was added to. I get the following two actions for every member of the group:
Member '-' was removed from 'Domain\Group' by 'Domain\User' on...
Member 'DN of Member' was added to 'Domain\Group'...
This is a problem because it makes our audit reports and notifications worthless since we'd have to read through all the noise to see an actual anomaly. I'm also concerned that if users are actually being removed and re-added to those groups, that there
could be some consequences of that that we aren't seeing yet (i.e. application access interruptions, or what if the connection to AD is lost after removing the users but before adding them back in). Although I should say I'm not convinced that the users are
actually being removed because as you can see above, no member information is recorded on the removal, and all the removals and additions have the same exact time stamp meaning they occurred within 1 second, which seems pretty fast given that some of our groups
are large.
Is this the intended behavior of the Add User to Group activity? If so, is there a workaround I can use to avoid this behavior? The next thing I'll try is using PowerShell to add the user to the group, but this option isn't ideal since the runbook will be
managed by users who are not that familiar with scripting, so I'd like the solution to contain as little as possible.
ThanksHi,
the issue of the AD IP 7.0 is reported here
http://social.technet.microsoft.com/Forums/de-DE/eef9cdda-774f-4b95-bd89-aa3f86feee9b/ad-integration-pack-add-user-to-group-activity-problem?forum=scoscip
Try the up-to-date Version 7.2
http://www.sc-orchestrator.eu/index.php/scoblog/115-updated-system-center-2012-r2-orchestrator-integration-packs-available
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu -
Hi Microsoft Excel Power Map program team!
I looked @ your Excel Power Map program add on, and it’s great.
However everyone is looking for the ability for the user to create polygon (boundary) maps.
It should not be that hard to add this functionality onto such a great map program you already have.
For example: let’s say one has 10 latitude & longitude coordinates and he wants to see the polygon (boundary) of them on your great map. One should be able to just put those 10 latitude & longitude coordinates in an Excel sheet, fire up your Power
Map, select that it should be plotted as a polygon (boundary) and it will display on the map.
Does Microsoft have any plans to add user polygon (boundary) map creation ability to your great Excel Power Map program?
I would also like to see Excel Power map have USA census tracts built into it just like is has USA zip codes built into it. Census data is also very important as thousands and thousands of people need to display polygon (boundary) for census tracts.
Please let me know if Microsoft has any plans to add user polygon (boundary) creation ability to its great Excel Power Map program?
Thank you very much!Hi,
Thanks for your feedback, based on your feature required, I'll move your thread to Power Map forum, there might be give us some light.
https://social.technet.microsoft.com/Forums/en-US/home?forum=powermap&filter=alltypes&sort=lastpostdesc
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Maybe you are looking for
-
Hello, I am working on knowledge base entries for developing Web Applications with Sun ONE Studio. I would be interested in whether any of the following are helpful. Also, are there other entries you think should be added? Other comments? Corrections
-
ITunes account for a minor - migrating purchases from my iTunes account
For years, we have managed our kids iPod Touch / iPhone with an adult's iTunes account. Originally, our (now) 13 yr old had the Touch, then gave that to his brother when he got a hand-me-down iPhone. We decided to manage their devices and purchases
-
Artboards disappearing in Illustrator CS4
I'm using Illustrator CS4 on Mac OSX 10.6 and have created a 12 page document for folks at work. Every time I re-open the document to make amends all but the first artboard have disappeared. All the artwork content is still there, layers are fine etc
-
Material specific status in material master
Hi, We have a material A. in the material master for A, in the basic data ,the "X plant mat status is Z4 which means material discontinued. In the sales org tab for the same material, the "dis chain specific status" is Z1 which also means material un
-
Hi Experts, tell me the technical field for invoice Thanks & regards narendra