Postgresql error: Log show can't access postgresql.conf

Hello,
In the Console, I have this looping error:
18/07/12 3:57:23.534 AM org.postgresql.postgres: postgres_real cannot access the server configuration file "/var/pgsql/postgresql.conf": No such file or directory
18/07/12 3:57:23.536 AM com.apple.launchd: (org.postgresql.postgres[9841]) Exited with code: 2
18/07/12 3:57:23.536 AM com.apple.launchd: (org.postgresql.postgres) Throttling respawn: Will start in 10 seconds
Spec: MBP 7,1, 2.4gHz Intel Core 2 Duo, 4GB DDR3 Ram, 500GB hard drive with Lion Server 10.7.4
Advice?
Thanks,
Tony

I'm having the same problem here.
Last night my laptop shut down due to lack of power It dualboots Win7 and Arch, neither of which run:
Here's the error I'm getting:
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
ERROR: Root device mounted successfully, but /sbin/init does not exist.
Bailing out, you are on your own. Good luck.
/bin/sh: can't access tty; job control turned off
[ramfs /]#
Booting into Win7 yields:
BOOTMGR is missing
I've booted up a KNOPPIX Livecd and the filesystem appears ok. Can I just try and reinstall GRUB, as I'm assuming that's what the problem is?
Thanks in advance,
Jacques

Similar Messages

After upgrade to iOS 6, one of my apps won't load. It seems to, then just ends. Is there an error log I can check?

After upgrade to iOS 6, one of my apps won't load. It seems to, then just ends. Is there an error log I can check?

so your starting it up and its just crashing right away, yes? can you tell me what app it acutally is? as iOS6 is so new my thought would be that its probably incompatable with it at this time, im having trouble with my networks app that just will not let me log in at all!
id suggest going to the page of the app on the app store and look to see if it says if its compatable or not? as for a error log its in usage data, which is in settings > general > about, and i think its near the bottom.

Hi there, got 3 issues at once.... 1) can't download the latest itune version (it simply stops, not even an error message) 2) can't access the itune store and in order to fix this i need the latest version 3) one of my ipods isn't recognised by itune

Hi there, got 3 issues at once....
1) can't download the latest itune version onto my PC (it simply stops, not even an error message)
2) can't access the itune store and in order to fix this i need the latest version - catch 22!
3) one of my ipods isn't recognised by itune, nit sure if because of the earlier problems?
.... thanks
S.

Hello SAB7700,
This first article can help get iTunes successfully downloaded and updated, which should restore access to the iTunes Store.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Once iTunes is successfully updated, the following articles provides steps that can help get your iPod working in iTunes again and the iTunes Store functioning, should the update not resolve these issues
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

Urgent: Oracle Text error: DRG-10001: can not access result table

Hi,
I am getting the "DRG-10001:can not access result table" error when trying to run the oracle text procedure ctx_cls.train within HTMLDB. The schema i used for parsing is granted with the necessary privileges, and i can run the procedure manually using the same schema in sqlplus. Following is the script I am trying to run:
1. begin
2. ctx_cls.train(
3. index_name => 'MyDocindex',
4. docid => 'MyDoc_id',
5. cattab => 'MyDocTab_categories',
6. catdocid => 'cat_MyDoc_id',
7. catid => 'cat_id',
8. restab => 'rules',
9. rescatid => 'rule_cat_id',
10. resquery => 'rule_text',
11. resconfid => 'rule_confidence'
12. );
13. end;
Please help urgently!
Thanks
RG

I seem to have hit a similar problem.
Did you eventually resolve this problem?
Rgds
Z

CAN NOT OPEN UP FIREFOX...ERROR ENTRY POINT CAN BE ACCESSED FROM XUL.DLL

'''3rd time have been locked out.....can not access mozilla or important sites....error '''reads..... The procedure entry point NS_Set Dl Directory could not be located in the dynamic link library xul.dll.......urgent repair needed.....even when internet explorer ooens....certain sites I stll get that error.....like my bank.....like my contact em list.....help immediate please.

hi, do you have service pack 3 installed on your xp computer?

Laptop will not boot, stops at Toshiba screen then an error message. Can't access BIOS

I receive the following error message:
For Atheros PCIE Ethernet Controller v2.2.7(11/02/10)
Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key
Before it first shut down, there was some blue screen with a message I was unable to read in time. I turned it back on and got the above message. I have done some research and it sounds like some kind of hard drive problem. I've checked the hard drive connection and it's fine, the same message appears. I also saw that you can access BIOS(not sure what this is exactly, I've never used it) and then somehow recover, reset or change a boot setting that may have changed by itself. I can't access it though. I have tried F8, I have tried pressing escape as soon as the red Toshiba screen comes on, and also tried holding it and releasing when the tone sounds, then pressing F1 but all I get is a tone and no screen.
It's about to be finals week and I really need some help getting this fixed...preferrebly without having to by a new hard drive because all kinds of homework, papers and study info is on this computer. I haven't even had it for two years yet. I can attach a picture of the screen if needed but it's just a black screen with the above message.
Thanks for any help!
EDIT: Satellite L655-S5150 and Windows 7
Solved!
Go to Solution.

It does sound like a hard drive related issue, be it a virus, or physical failure. If you have fast boot enabled, you will need to hold down F8 while you power up, as just tapping F8 at the BIOS splash screen will not work. If you are unable to recover that way, hopefully you created recovery media when you first got the laptop(it would have prompted you in the action center).
If that was not done, you could always swap in a new hdd to get the system up and running, and get a eSATA to USB cable to get all of your info off your old drive.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

Error Log showing Line Items missing in APP Cheque Printing

Hi
Am working on APP Cheque Printing... i hav run here the F110 Steps ..Spool is also generated ...everything is cuming correct...but in spool one error log is also generated as below :
Error log
F0251                    In form YCHEQUE_NEW1 / window MAIN , the element 525 (Line items) is missing
F0253                    Output of the relevant forms is defective
YCHEQUE_NEW1 -> The Cheque Print Script . In my Cheque Output i dont want to display the Line Items ..That's why in Script i hav deleted all the coding under the element 525 which displays Line Items data....
then am getting this error log ..
Please let me know how to solve this problem..
Thanks in Advance
SATYA

Hi,
Just comment the code which is present in that text element or remove the code.
Do not comment text element(i.e Empty text element).
/E 525     "Do not remove or comment this line
*Comment all code
Edited by: Anil Mane on Sep 12, 2008 8:41 AM

Apache error log shows localhost requests going to /var/empty

( 1 )'/etc/apache2/httpd.conf' shows the DocumenRoot as '/Library/WebServer/Documents', as has been standard for previous OSX versions.
( 2 ) Create a simple php file 'local_info.php' and drop it into the DocumenRoot.
( 3 ) try to access : https://localhost/local_info.php
( 4 ) the page is not served, and I get a 'Not Found' error.
( 5 ) Go to '/var/log/apache2/error_log'
[Sat Feb 04 15:21:48 2012] [error] [client ::1]
    script '/var/empty/local_info.php' not found or unable to stat
( 6 ) If I go to 'System Preferences -> Sharing -> Web Sharing' and restart Apache, then try to access the page nothing changes, the 'Not Found' error persists.
( 7 ) If I copy 'local_info.php' from '/Library/WebServer/Documents/local_info.php' to '/var/empty/local_info.php' and then point the browser to
( 8 ) try to access : https://localhost/local_info.php
      the page is displayed correctly.
This is basically pretty much pristine copy of 'OS X Lion -> OS X Lion Server' with 'Server.app -> Services -> Web' turned off for the moment. During this testing phase I am only trying '/Library/WebServer/Documents', and not the virtual hosts.
I have the virtual hosts working very well through 'Server.app -> Services -> Web' which like I said above is turned off for the moment. The only problem I ran into there was that '/etc/hosts' was not being modified when a new virtual host was added via 'Server.app -> Services -> Web', but that was under OS X Server Lion 10.7.2, since I created the virtual hosts, I installed the Combo Updater for Lion Server 10.7.3, and I have not tried to create any new virtual hosts since then.
It is interesting that towards the bottom of httpd.conf there are some flags that load different pieces of code depending upon what flags are set. What is even more interesting is that both 'Server.app -> Services -> Web', and 'System Preferences -> Sharing -> Web Sharing' use one common '/etc/apache2/httpd.conf' file, which depending upon which flags are set during Apache startup load different config code. At least I think it is interesting...
These are the flags I noticed in /etc/apache2/httpd.conf
<IfDefine !MACOSXSERVER>
<IfDefine MACOSXSERVER>
<IfDefine WEBSERVICE_ON>
<IfDefine !WEBSERVICE_ON>
<IfDefine WEBSHARING_ON>
# Here only 'System Preferences -> Sharing -> Web Sharing' is running
$ ps aux | grep httpd
root            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSHARING_ON
_www            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSHARING_ON
# Here only 'Server.app -> Services -> Web' is running
$ ps aux | grep httpd
root            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSERVICE_ON
_www            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSERVICE_ON
$
# Here both 'Server.app -> Services -> Web', and 'System Preferences -> Sharing -> Web Sharing' are running
$ ps aux | grep httpd
_www            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSERVICE_ON -D WEBSHARING_ON
root            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSERVICE_ON -D WEBSHARING_ON
$
Here's some handy stuff that is echoed to my terminal for easy access
# Some handy commands to access the files I use regularly...
sudo open -a /Applications/BBEdit.app /etc/hosts
sudo open -a /Applications/BBEdit.app /etc/php.ini
sudo open -a /Applications/BBEdit.app /etc/bashrc
open -a /Applications/BBEdit.app ~/.bash_profile
open -a /Applications/BBEdit.app ~/.bashrc
open -a /Applications/BBEdit.app ~/.bash_history
# Or I can open all three at the same time
open -a /Applications/BBEdit.app /etc/bashrc ~/.bash_profile ~/.bashrc
To (show|hide) files set AppleShowAllFiles (true|false) and kill the finder
defaults write com.apple.Finder AppleShowAllFiles true
KillAll Finder
Hopefully Apple will get this problem fixed quickly so that 'System Preferences -> Sharing -> Web Sharing' works correctly...
Bill Hernandez
Plano, Texas

I've learned some interesting things since I posted the original message on this thread a couple of days ago.
I had looked at the 'Include directives towards the bottom of httpd.conf, and I did a quick search on 'DocumentRoot' and hit the 'previous' button in BBEdit's find dialog. Sure enough it came up with:
DocumentRoot "/Library/WebServer/Documents"
However if I would have started the search from the top of the document I would have noticed that '/var/empty' that I found in the logs was not a bug, not an error, but by design.
If I would have gone a few lines further up I would have seen :
<IfDefine MACOSXSERVER>
DocumentRoot /var/empty
which explains it all. How incredibly cool, this is really clever!
This morning I went back to httpd.conf
sudo open -a /Applications/BBEdit.app /etc/apache2/httpd.conf
and right at the top of the document staring me right in the face was:
# Mac OS X / Mac OS X Server
# The <IfDefine> blocks segregate server-specific directives
# and also directives that only apply when Web Sharing or
# server Web Service (as opposed to other services that need Apache) is on.
# The launchd plist sets appropriate Define parameters.
# Generally, desktop has no vhosts and server does; server has added modules,
# custom virtual hosts are only activated when Web Service is on, and
# default document root and personal web sites at ~username are only
# activated when Web Sharing is on.
Basically on the Lion Server you are not relying on DocumentRoot, everything is done via the VIrtual Hosts in 'Server.app -> Services -> Web'.
The default Virtual Host when you first launch 'Server.app -> Services -> Web' is <whatever_hostname_you_gave_your_computer>.local, and it points to /Library/Server/Web/Data/Sites/Default, at this point there is no localhost defined as you are used to seeing, there is only /var/empty.
As soon as you create a localhost Virtual host in 'Server.app -> Services -> Web', and the instance of Apache stops and restarts everything works as expected, http://localhost shows a webpage with 'It works!'.
The moral to this whole story is that after having read/modified countless httpd.conf documents, and manually creating the Virtual Hosts, and Includes, and not bothering to read '/etc/apache2/httpd.conf' for Lion Server, it is currently printing and I have my yellow highlighter ready so I can go through it and expand the wisdom level from none to minimal...
I am off to read !
Oh, one thing I did do is drop a copy of a 'local_info.php' that I created that provides some info during testing while I am figuring all this out, but basically the gist is that I put this : <?php echo(__FILE__); ?> along with some other little bits of info anytime the page was hit. I dropped it into several of the virtual hosts I created to make sure I understand how this is all working.

Flashing grey screen and background pic when log in, can't access anything!

Please bare with me, this is a long one since I'm including every little detail in hope that it helps my desperate situation. I have been receiving "startup disk is full" messages for about a month now on the MacBook Air OS X Version 10.8.5 I bought new last summer. I am currently traveling throughout Asia with limited internet access, but am working from the road, which makes having a working computer critical. I checked online and followed all the advice I understood on how to clear up space: moved all my documents and pictures to Box/Dropbox, deleted unused applications, and emptied my general trash and iPhoto trash. This only stopped the startup disk full messages for a week before they started coming up again and again. I checked my storage and it said the "Other" was taking up most of the space. I realize that this could mean any number of things.I downloaded omnidisksweeper, but didn't want to risk deleting anything when I didn't what they were for. If I remember correctly, of the things I recognized, it said that my Mail was taking up a lot of space, but that made sense since I have 3 large accounts I work from. I deleted the couple files that were in the "recovered" file. Last week one of my email accounts kept resenting me the same 30 messages for a couple days. I couldn't figure out why. A couple days ago, I went to turn on my laptop after shutting it down the night before. I was able to log into my user, but once I logged in, my background picture and this blank, grey screen started alternately flashing. My dock on the bottom does not show up. In the top right corner it shows my Dropbox box icon (which I can click on and it says it's up to date, but nothing happens when I try to open it) but none of the rest (battery, Internet icons, etc). When I click on the apple in the leftmost corner nothing happens. In the top left corner the Finder toolbar shows up, but the drop down menus only open sometimes. When I click on anything from the drop down menus nothing happens. Sometimes a window pops up that says that "the last time you opened Finder, it unexpectedly quit while reopen ing windows. Do you want to try to reopen again?" The the meantime that grey screen is still flashing in the background. I have chosen "don't reopen" and "reopen" before, but nothing happens. I tried pressing down control, command, delete as suggested but nothing happens. I end up having to hold down the power button, and choose the shut down when the usual shut down, restart, sleep message shows up. I am able to access the Guest User account without problems and created a new User. However, the disk is, of course, still full, so I'm right back where I started, except that I'm unable to access my main user account that actually has all my stuff on it. I searched online and haven't been able to find anything similar to my situation. Please give me any suggestions you might have, I'm in Indonesia at the moment and have nowhere I can take it for help, but still need to work! I'm not very tech savvy (obviously), so please try to be specific! I've run the disk utility "Verify Disk" thing but it says everything's ok. I downloaded omnidisksweeper again onto the new user I created with the limited space I have available, but don't really understand what anything on it means! It says that most of the space is taken up as follows: 9.5GB private, 4.5 GB applications, 3.7 GB system, 3.6 GB library.
Is there anything specific I should be looking for? Is there anything I can do to get my original user account to work?

Welcome to the Apple Support Communities
If you don't remember the password, you have to reset it. As you have a new MacBook, you are using OS X Mountain Lion, so follow these steps > http://discussions.apple.com/docs/DOC-4101

Data Warehouse SQL error log shows failed login

In addition to the above title, on our management servers (x2 Win 2012 R2 - SCOM 2012 R2), I am seeing the event ID 31551 stating:
Failed to store data in the Data Warehouse. The operation will be retired. Exception 'SqlException':Login failed for user 'xx'.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.CollectEntityHealthStateChange
Instance name: management server
Instance ID: {xxxxxxxxxxxxxxxxx}
Management Group: XXXX
I've logged onto Data Warehouse server using the account referenced in the error message, loaded SQL Management Studio (2012 Std), and logged in and am able to see, view tables within the OperationsManagerDW database. So I'm trying to establish what's going
on! If I can access the DW DB using the account, why am I getting these errors?

Hi
Unfortunately, this hasn't resolved the issue. I've ran the query DBCC CHECKIDENT ("EventChannel"); and have got the following response back:
Checking identity information: current identity value '1', current column value '1'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
I've revisited the run as account for 'Data Warehouse SQL Account' - this is a domain account. I've checked the Data Warehouse DB and can confirm that it's got write access over the database. I'm using the same account as the 'Data Warehouse Action Account'.
However, the SQL log on the data warehouse server is saying failed login, see below:
Login failed for user 'sv-scom-dw'. Reason: Could not find a login matching the name provided. [CLIENT: Management server 1 IP]
I've checked the 'Management Group' table and can confirm the WriterLoginName is DOMAIN\sv-scom-dw
However, the SQL error looks like it's looking for a local SQL login. The database is set to Mixed mode authentication.
Any ideas?

Error log. Can anyone help me with time capsule??

Ok my problems started when I upgraded to Snow Leopard.
So today I tried again using an ethernet connection. Took ages to verify back up and then prepared for back up and then failed. Here is my log
Starting standard backup
Attempting to mount network destination using URL: afp://Martin%[email protected]/TC01%20MJM
Mounted network destination using URL: afp://Martin%[email protected]/TC01%20MJM
Running backup verification
QUICKCHECK ONLY; FILESYSTEM CLEAN
Backup verification passed!
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/TC01 MJM/Martin Murray’s MacBook Pro_0023df87b79e.sparsebundle mounted at: /Volumes/Backup of Martin Murray’s MacBook Pro
Backing up to: /Volumes/Backup of Martin Murray’s MacBook Pro/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Node requires deep traversal:/ reason:must scan subdirs|new event db|
No pre-backup thinning needed: 59.50 GB requested (including padding), 349.98 GB available
Indexing a file failed. Returned 200 for: /Applications/Adobe Bridge CS4/Plug-Ins/multiprocessor support.plugin, /Volumes/Backup of Martin Murray’s MacBook Pro/Backups.backupdb/Martin Murray’s MacBook Pro/2010-07-25-152744.inProgress/7DAFB63C-32BA-4824-9546-AEFA2F7CC9E9/Macintosh HD/Applications/Adobe Bridge CS4/Plug-Ins/multiprocessor support.plugin
Aborting backup because indexing a file failed.
Stopping backup.
Copied 15 files (3.1 MB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image.
Ejected Time Machine network volume.
Attempting to mount network destination using URL: afp://Martin%[email protected]/TC01%20MJM
Mounted network destination using URL: afp://Martin%[email protected]/TC01%20MJM
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/TC01 MJM/Martin Murray’s MacBook Pro_0023df87b79e.sparsebundle mounted at: /Volumes/Backup of Martin Murray’s MacBook Pro
Can anyone help me please???
Thanks,
Martin

mjm81 wrote:
Indexing a file failed. Returned 200 for: /Applications/Adobe Bridge CS4/Plug-Ins/multiprocessor support.plugin
Time Machine is having a problem with that file. See #C3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).

I suddenly am unable to retrieve my emails. I discussed this with my Internet provider, but still get an error message and can't access my emails. Any suggestions???

I am unable to retrieve my emails since yesterday. I called Time Warner Cable, my Internet provider, but they could not help me; they stated that the settings had changed, since they were upgrading. I adjusted the settings, but still get an error message:
          Alert
          There may be a problem with the mail server or network. Verify the settings for account "Mail 1" or try again.
          The server returned the error: The connection to the server "smtp.roadrunner.com" on port 110 timed out.
I changed the server, and the port, as Time Warner Cable tech rep recommended, but to no avail. They recommended I delete my current email account and recreate it, but that I check with Apple first, because I might lose my contact list (and any email messages I'd previously saved!?). They suggested Apple might be able to tell me how to not lose the contacts, emails, profile.
Any help would be appreciated.

Hi, what Interface are you using, & which one are you checking?
Each Interface will have it's own settings.
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

SSL Error 61. Can't access work from home

I keep getting this error and is says I haven't chosen to trust the certificate. But when I go to Keychain the certificate isn't there. So how do I trust it? Go buy a PC?

How are you trying to access work?

Spybot causes firefox to give errors that it can't access some sites, even though other browsers still can; I reported the error to you before I knew.

Just letting you know I found the problem. I did not see that that fix was already reported anywhere.

Using the Firefox immunize with Spybot can cause problems. It dumps hundreds of block items into the permissions and really slows things down.

Log shows attempt to access my computer

I have my Leopard firewalls enabled and the do not acknowledge checked also. When I check my security logs, I notice 50 to 60 attempts to connect while in stealth mode. These are usually from three or four Ip address and randomly try make contact with random ports on my computer. Am I safe? What is going On? My Comcast provider does not respond to my bringing it to there attention. I fear it might slow my connection as my cable modem is in constant activity. I fear its looking for a hole but I have no ideas what is going on. When I try a trace IP lookup I usually do not get any info back. Once I got an amsterdam address. Any explanations would be appreciated.

there are [random port scans|http://en.wikipedia.org/wiki/Portscanning] all the time on the internet. they affect absolutely everybody. you are not unique at all. some are malicious attempts but they are not targeted at you specifically. there is nothing you need to do beyond standard security measures which you seem to have done already.

Postgresql error: Log show can't access postgresql.conf

Similar Messages

Maybe you are looking for