PostGresql won't start - datasync services status "unused"

Hello,
Today we started having intermittent issues with our Datasynchronizer Server vs. 1.2.3 Build 882. I checked the datasync services and they shown unused as a status. I then started the services then it comes back for a while then shuts down (20 min). I then figured I would shut the postgresql down and restart it however it fails. When I turn the silent mode off in the postgresql config file, I get this error below.
FATAL: Could not write lock file "postmaster.pid": No space left on device could not start sever.
I checked the files system with a df -kh and it shows my /dev/sda2 as 100% /var I went in to the /var/log/datasync/connectors where there were a ton of logs and deleted them by sending them to trash. I didn't see anything in the trash so I rebooted, but I'm still at 100% ? There must have been about 10Gb of Logs I deleted. The other folders within /var/log/datasync don't seem to have near the size of logs that this connectors log used to have.
Any help is appreciated, thanks,
housej55

Well somehow you are going to have to find a short term fix and get some space available...otherwise nothing else matters.
--El
Originally Posted by housej55
Hello,
Today we started having intermittent issues with our Datasynchronizer Server vs. 1.2.3 Build 882. I checked the datasync services and they shown unused as a status. I then started the services then it comes back for a while then shuts down (20 min). I then figured I would shut the postgresql down and restart it however it fails. When I turn the silent mode off in the postgresql config file, I get this error below.
FATAL: Could not write lock file "postmaster.pid": No space left on device could not start sever.
I checked the files system with a df -kh and it shows my /dev/sda2 as 100% /var I went in to the /var/log/datasync/connectors where there were a ton of logs and deleted them by sending them to trash. I didn't see anything in the trash so I rebooted, but I'm still at 100% ? There must have been about 10Gb of Logs I deleted. The other folders within /var/log/datasync don't seem to have near the size of logs that this connectors log used to have.
Any help is appreciated, thanks,
housej55

Similar Messages

Password service won't start

Following an unplanned hard restart of our server (Mac OS X 10.9.5, Server 3.2.2), the password service won't start, so our staff can't log into mail, calendars or file sharing.
When I launch Open Directory, the main window has the message "Unable to load replica list", then it switches itself off after a minute or so.
I've looked at the certificates in Server and they have the green tick so presumably are OK.
DNS is working OK and running the command "sudo changeip -checkhostname" reports success.
Here's the section of log that repeats every few seconds as PasswordService repeatedly starts up and exits:
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService[5890]) Exited with code: 1
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:02.540 xscertd[249]: Failed sending LookupCRLByCARecordName command to com.apple.xscertd.helper: The operation couldn’t be completed. (com.apple.certificateserver error 42005.)
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd[5894]) Exited with code: 1
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd) Throttling respawn: Will start in 7 seconds
13/03/2015 20:55:10.206 xscertd-helper[5897]: ldap_search_ext_s returned -1 - Can't contact LDAP server when searching for bdb suffix, exiting
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper[5897]) Exited with code: 1
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject loadXMLData]: Unable to locate passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject saveXMLData]: ldap_modify_ext_s of the passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.684 PasswordService[5901]: int pwsf_GetPublicKey(char *): ldap_search_ext_s cn=authdata for Public Key returned -1
13/03/2015 20:55:10.687 com.apple.launchd[1]: (com.apple.PasswordService[5901]) Exited with code: 1
I have backups (both Time Machine and clones of the hard drive) that I could use to restore the corrupted bit of the configuration, if necessary, but I don't know what to restore.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; e.g., Ethernet and Wi-Fi.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be itself, unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. If you have accounts with network home directories, make sure the URL's are correct in the user settings. A return status of 45 from the authorizationhost daemon in the log may mean that the URL for mounting the home directory was not updated after a change in the hostname.
5. Only if you're still running Mavericks server, follow these instructions to rebuild the Kerberos configuration on the server.
6. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
7. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
8. Reboot the master and the clients.
9. Don't log in to the server with a network user's account.
10. Disable any internal firewalls in use, including third-party "security" software.
11. If you've created any replica servers, delete them.
12. If OD has only recently stopped working when it was working before, you may be able to restore it from the automatic backup in /var/db/backups, or from a Time Machine snapshot of that backup.
13. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.
If you get this far without solving the problem, then you'll need to examine the logs in the Open Directory section of the log list in the Server app, and also the system log on the clients.

Microsoft Forefront Server Protection Eventing Service won't start?

Hi Guys,
When Forefront Protection for Exchange was integrated/enabled on our SBS 2008 server, Microsoft Forefront Server Protection Eventing Service won’t start. Even when we try to start it manually we are getting this message (see attached). During this attempt,
we got these events in the event viewer. In this case, in order to have our email working, we have to temporarily disable Forefront. Any suggestion how to fix this? Please advise.
Event 465
Source: ESENT
FSCEventing (9324) Corruption was detected during soft recovery in logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log. The failing checksum record is located at position END. Data not matching the log-file
fill pattern first appeared in sector 450 (0x000001C2). This logfile has been damaged and is unusable.
Event 301
Source: ESENT
FSCEventing (9324) The database engine has begun replaying logfile C:\Program Files (x86)\Microsoft Forefront Protection for Exchange Server\Data\Incidents\inc.log.
Event 454
Source: ESENT
FSCEventing (9324) Database recovery/restore failed with unexpected error - 501.
Event 1076
Source: FSCEventing
The Forefront Protection Eventing Service has stopped.
Thank you very much!
Arnel

Hi Arnel,
Based on error messages, it indicates a log file (inc.log) has become corrupted. Please restore the log file
from a backup copy, and then check if this issue can be solved. For more details, please refer to the following article.
Event Id 465
Hope this helps.
Best regards,
Justin Gu

DS 6.1 won't start as cluster service

Hi!
RG: hylas-ldap
Resources:
Logical Hostname hylas
HAStorage ldap-data-1 (Diskgroup contains instance data)
I installed DS 6.0 and patched up to 6.1. As the topic says... I'm able to start the instance on every node of the Cluster (SC 3.2) with "dsadm start /path/to/instance". Prior to that I switched the RG over to the node where the DS is started manually.
Once I register the SUNW.ds6ldap instance in my RG, it won't start.
Log:
Jul 31 11:57:55 xxxx SC[SUNW.ds6ldap,hylas-ldap,ds--argolis-disks-ldapdata1-hylas,dsldap_svc_start]: [ID 833212 daemon.info] Attempting to start the data service under process monitor facility.
Jul 31 11:57:55 xxxx Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ds--argolis-disks-ldapdata1-hylas status on node xxxx change to R_FM_ONLINE
Jul 31 11:57:55 xxxx Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ds--argolis-disks-ldapdata1-hylas status msg on node xxxx change to <Completed successfully.>
Jul 31 11:57:55 xxxx Cluster.PMF.pmfd: [ID 887656 daemon.notice] Process: tag="hylas-ldap,ds--argolis-disks-ldapdata1-hylas,0.svc", cmd="/bin/sh -c /opt/SUNWdsee/ds6/bin/dsadm start /argolis/disks/ldapdata1/hylas", Failed to stay up.
I tried to execute the bold commandline... it quits with "Error: Missing subcommand".
Adding the missing quotes "/bin/sh -c \"/opt/SUNWdsee/ds6/bin/dsadm start /argolis/disks/ldapdata1/hylas\" would certainly help, but where do I apply the fix?
Maybe thats not the problem... any hint is appreciated.
TIA && rgds,
orknase

Hi, ludovicp!
dsadm start exec /path/to/instance works fine. The only time it doesn't start up is when I enable dsargolis-disks-ldapdata1-hylas in RG hylas-ldap and switch the RG online.
snip taken after dsadm start ...
dsadm info /argolis/disks/ldapdata1/hylas
Instance Path:               /argolis/disks/ldapdata1/hylas
Owner:                       root(root)
Non-secure port:             389
Secure port:                 636
Bit format:                  64-bit
State:                       Could be retrieved using Sun Cluster commands.
Server PID:                  12191
DSCC url:                    -
Sun Cluster resource group: hylas-ldap
SMF application name:        -
Instance version:            D-A00So yes, it looks like a problem with the interaction SC/DS. The agent submits the same command. Thats why I thought the defect #6563445 is related to it. Oh well, I think on monday the service plan information will be available to this account and I will have a few more possibilities to check.
Rgds,
orknase
Message was edited by:
orknase

I updated iTunes 10.3.1 today, and now it won't let me open itunes it keeps saying error 7 (windows error 14001) and also says (apple mobile failed to start verify significant privileges to start system services)

I updated iTunes 10.3.1 today, and now it won't let me openitunes it keeps saying error 7 (windows error 14001) and also says (apple mobile failed to startverify significant privileges to start system services) I have unstalled it severaltimes, tried repairing it also switched off all security software and checkedall files are deleted in local disk (program file) but still no look. Please cansomeone help

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2

Itunes won't install. I get a message stating "apple mobile device failed to start. Verify that you have sufficient priveleges to start system services. I had itunes on this laptop and an urgrade came. Now nothing. Windows7, 64 bit

itunes won't install. I get a message stating "apple mobile device failed to start. Verify that you have sufficient priveleges to start system services. I had itunes on this laptop and an urgrade came. Now nothing. Windows7, 64 bit

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

SQL Server Service won't start on SQL Server 2008

Hi everyone,
I'm having trouble starting SQL Server service after stopping and starting the service. Before this happened, I created a Stored Procedure for marking all tables at once along with a maintenance plan for differential backup on all my databases based on the
recommendation from this link, http://msdn.microsoft.com/en-us/library/ms253070.aspx.
When I realized that the differential backup failed with some databases displaying (Restoring...) post-fix to the database name, I decided to stop SQL Server service and start it up. That is when I won't be able to start the service again.
Is there a fix for starting the SQL Server service? Any help is very much appreciated.
Additional information:
- With administrator permission granted.
- Service Pack 1 for SQL Server 2008 installed.
- Using default database instance.
- Tried C:\Program Files\Microsoft SQL Server\MSSQL.....\Binn>net start MSSQLSERVER /T3608 ( return msg: System error 5 has occurred. Access is denied.
- When I start SQL Server service, I keep getting this dialog msg:
"Windowns could not start the SQL Server (MSSQLSERVER) on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 1814."
The event log does not explain or provide any hint on how to fix the problem.
- Log msg:
2010-07-22 10:30:25.09 Server      (c) 2005 Microsoft Corporation.
2010-07-22 10:30:25.09 Server      All rights reserved.
2010-07-22 10:30:25.09 Server      Server process ID is 6076.
2010-07-22 10:30:25.10 Server      Authentication mode is MIXED.
2010-07-22 10:30:25.10 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2010-07-22 10:30:25.11 Server      This instance of SQL Server last reported using a process ID of 5708 at 7/21/2010 3:27:01 PM (local) 7/21/2010 10:27:01 PM (UTC). This is an informational message only; no user action is required.
2010-07-22 10:30:25.11 Server      Registry startup parameters:
    -d C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
    -e C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG
    -l C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2010-07-22 10:30:25.14 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2010-07-22 10:30:25.14 Server      Detected 4 CPUs. This is an informational message; no user action is required.
2010-07-22 10:30:25.23 Server      Using locked pages for buffer pool.
2010-07-22 10:30:25.43 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2010-07-22 10:30:25.73 Server      Node configuration: node 0: CPU mask: 0x000000000000000f Active CPU mask: 0x000000000000000f. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2010-07-22 10:30:25.81 spid7s      Starting up database 'master'.
2010-07-22 10:30:26.14 spid7s      CHECKDB for database 'master' finished without errors on 2010-07-19 21:15:02.823 (local time). This is an informational message only; no user action is required.
2010-07-22 10:30:26.18 spid7s      Resource governor reconfiguration succeeded.
2010-07-22 10:30:26.18 spid7s      SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2010-07-22 10:30:26.18 spid7s      SQL Server Audit has started the audits. This is an informational message. No user action is required.
2010-07-22 10:30:26.19 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2010-07-22 10:30:26.28 spid7s      SQL Trace ID 1 was started by login "sa".
2010-07-22 10:30:26.29 spid7s      Starting up database 'mssqlsystemresource'.
2010-07-22 10:30:26.31 spid7s      The resource database build version is 10.00.2531. This is an informational message only. No user action is required.
2010-07-22 10:30:26.43 spid10s     Starting up database 'model'.
2010-07-22 10:30:26.43 spid7s      Server name is 'XXXXXXXXXXXXXX'. This is an informational message only. No user action is required.
2010-07-22 10:30:26.47 spid10s     The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2010-07-22 10:30:26.47 spid10s     Error: 927, Severity: 14, State: 2.
2010-07-22 10:30:26.47 spid10s     Database 'model' cannot be opened. It is in the middle of a restore.
2010-07-22 10:30:26.59 spid10s     Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2010-07-22 10:30:26.59 spid10s     SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Hello,
Could you please copy the model.mdf and modellog.ldf from
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn\Templates
To
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA
Rebuilding the system databases you will lose lose logins, jobs, SSIS packages. You may have to restore or attach user databases.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

The Document Conversions Launcher Service status on a SharePoint Server 2013 Web front-end server displays "Starting" but does not start or stop

I have this strange error showing up from my second Web Front End Server, "The Document Conversions Load Balancer service is stuck in starting, The status showing up "Error Starting". When I lunch the start, it runs then went back to
the same status "Error Starting" for the "Document Conversions Load Balancer Service". How can I get of rid this issue?

Hi Mannyabdon,
Based on your description, I recommend to check the things below:
1. Run the PowerShell command below to check the status of the Secure Store Service:
Get-SPServiceInstance |Where {$_.typename -like "Document Conversions Load Balancer Service"}
If it is not showing online, please stop the service first and then start it to see if the issue still occurs (the
<ServiceGUID> can be obtained obtained from the command above).
Stop the service:
Stop-SPServiceInstance -Identity <ServiceGUID>
Start the service:
Start-SPServiceInstance -Identity <ServiceGUID>
2. Check the ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

NSM3 service won't start anymore

Hi,
NSM AD 3.0.4 on W2008R2
has been running fine for months, now engine service won't start anymore.
engine.log from todays start:
01 2012-12-13 11:19:19 7200 1 0001 1452 1480 ML: Failed to initialize 1
or more components and/or subsystems. Engine is switching to
stop-pending state.
ideas?
sk

Sami,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

11.1.4 gives me an error message that says Service "Apple Mobile Device" failed to start. Verify you have sufficient privileges to start system services. Now, iTunes won't work at all.

11.1.4 gives me an error message that says Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. Now, iTunes won't work at all.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Service of newly created database won't start if XE service already started

Hi all,
I install OracleXE 10g on WinXP SP1 and the default database (XE) is running well. Then I created a new database through TOAD but its window service won't start if XE service already started. If I shutdown the XE service than I can start the service of newly created database. This happens vice versa. When I forced to start the service of the new database with XE service already running windows told me to refer to service-specific error code 183.
But even if I'm able to start the service of the new database when I try to login using SYSTEM sometime it throws 'Oracle not available' and sometime 'shared memory realm does not exist'.
Here's my listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(SID_NAME = CASHIN)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = SOLTIUS-SETYA)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
And here's my tnsnames.ora:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SOLTIUS-SETYA)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
CASHIN =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SOLTIUS-SETYA)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = CASHIN)
I also check the folder %ORACLE_BASE%\oradata\CASHIN folder but I found no single file there. While under oradata\XE I found 6 dbf's files.
The reason why I created a new database is because I want to put Oracle files at another location instead of where XE files reside now.
Any help would be greatly appreciated.
Thanks in advanced.
Regards,
Setya

Then I created a new database through TOADDid you read the part in the license agreement that says XE doesn't support multiple instances?
~Jer

Sql Service and Databases won't start on two of my databases SQl 2005

getting the errors below
In Event viewer I have Event ID 17120 SQL Server Could not Spawn FRuncm thread check the sql server error log and the windows event logs for information about possible related problems.
Event id 17826 Could not start the Network Library because of an internal error in the netwpork library. To determine the cause review the errors immediately preceding this one in the error log.
Also Event id 17182 TDSSN1 Client initialization failed with error 0x2,
status code 0x1
I think this post could help me but I do not know
what is the domain login account for the SQL service is in sql 2005.
Please see the post below
1. added our domain login account for the SQL service to the local group SQLServer2005MSSQLUser$HSPCSVR03$MSSQLSERVER
2. added the domain login account for the Agent service to SQLServer2005SQLAgentUser$HSPCSVR03$MSSQLSERVER
3. added both accounts to the local computer Administrators group.
4. deleted C:\Documents and Settings\<user>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\Shell\mru.dat.I hope someone can help me with this. this broken Backup exec Database
has become a nightmare. Two of the sql databases, both the bkup exec one and one called MS SQlserver will not start under services and the local system account or the Administrator account.
Droid Hacker

Hello,
Did you refer to the folloing blog to troubleshooting this issue?
Error Messages of SQL Server 2005 Start Up Failure
According to the blog above, "TDSSNIClient initialization failed with error 0x2" , 0x2 is the OS error. Typing "net helpmsg 2" in command prompt return:The system cannot find the file sepcify. Status code 0x1 is general status code. You can review error
log which start from error:17182 in SQL Server error log and mapping status code to specific problem.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Mavericks Server Calendar and Contacts services won't start.

Recently the calendar and contacts services stopped working. Client computers started getting errors like this:
"The server responded with an error https://[some UID and a lot of other info]... is not a location that supports this request."
It was suggested by Apple tech support to do a free install/rebuild, but that's not really an option simply because of the wiki. I've previously spent months trying to migrate wikis from Mountain Lion Server to Mavericks server; never coming across a working solution and ending up having to copy/paste every page from the old server to the new server. Apple had no working solution for migration wikis and instead suggested a reference to a Krypted site URL (which also didn't work).
Other services are working just fine, but here are the symptoms we're experiencing:
Calendar service has reported a code 0 at one point, but did not continue the error
Calendar service has reported a code -1 at one point, but did not continue the error
Calendar service in can be toggled on, but the service never starts and stays offline even though the toggle switch is "on".
Calendar service full status in Terminal.app is stuck in starting
Calendar and Contacts services seem to take a while to load the status pane in Server.app
Client computers get repeated, non-stop, connection error dialogue boxes in Calendar.app
Occasionally when I try to see the Contacts service status by select it, I get "A networking error occurred while trying to communicate with the server" - this is using Server.app on the server itself, not from a client computer.
It seems the two primary problems are starting the services and therefore connecting to them. Other services such as wiki and filesharing are working fine.
Any ideas folks?
BTW - my Time Machine backup did nothing to help the situation.

Logs?

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Web services won't start - error 100002

Hi there
I have done a freash install of Leopard Server 10.5.4 and updated to 10.5.8 on an Xserve G5. Added a 2nd web site (in addition to default) and now web services won't start returning the error:
A service has encounted an error.
Try to refresh the view (mysever.com/Web)
(Could not start web service - details in error log.)
100002
Below is in the error log for both web sites:
Syntax error on line 1310 of /private/etc/httpd/httpd.conf:
Invalid command '<Proxy', perhaps mis-spelled or defined by a module not included in the server configuration
The following is a Console Message:
10/4/09 10:50:18 PM com.apple.launchd[1] (org.apache.httpd-1.3[4682]) Exited with exit code: 1
10/4/09 10:50:18 PM com.apple.launchd[1] (org.apache.httpd-1.3) Throttling respawn: Will start in 10 seconds
Any pointer of how to solve this would be appreciated.
Cheers, Paul

Thanks for the reply. line 1310 is <Proxy disabled_proxy>
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
<Directory "disabled_proxy">
Allow from example.com
Order Deny,Allow
Deny from all
</Directory>
<Proxy disabled_proxy>
Allow from example.com
Order Deny,Allow
Deny from all
</Proxy>
</IfModule>

PostGresql won't start - datasync services status "unused"

Similar Messages

Maybe you are looking for