Posting a parked document with a BI session

Hi, I am trying to post a parked dokument in FI through a batch input session.
The problem is that the parked dokument is yet not complete and I want to complete it with the missing line items and post it in one step, meaning with one batch input. is that possible? especially in using the RFBIBL for triggering the batch input session.
Is it possibel to post a parked document with FB01 when parked dokument and 'new posted document' have the same document ID? what happens with the parked document if this is possible?
thanks! for your help
denise

Hi
I suspect it may not be possible. The only option i could see in FBS1, is Post with reference, but again it would not accept parked document as reference
Thank You,

Similar Messages

How to post a PARK document with Withholding Tax

Hi All,
I have parked a document using FB60.Vendor is subject to withholding tax.Now,when i am posting the document through FBV0,the error message displayed is :
"Field BSEG-SECCO does not exist in the screen SAPMF05A 0303".
The error message says that Section Code (Withholding Tax) is missing for Special G/L Indicator Line Item.I dont have provision to enter section code in the screen.
My entries are :
29J Vendor a/c Dr.
50 XYZ a/c
If i using F-02 and not parking ;then it is getting posted.
Note: Line Item is a special G/L Indicator
Please advise how to post a park document using FBV0 with special g/L Indicator and vendor is subject to withholding tax.

Hi Parag,
Section code field doesnot exist in the special G/L indicator line item of the document.So,i cannot enter it.
But,when posting the parked document ,it is asking for Section Code.
The error message displayed is:
"Field BSEG-SECCO. does not exist in the screen SAPMF05A 0303"

Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

Hi,
I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
I am not sure what is the reason for this. Can anybody help me sort out this Issue.
Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data Tab in the Invoice.
Regards,
Deepak.

Dear Praveen,
please check into IMG if You defined the WT type You are using for Your Comapny code:
IMG --> Assign Withholding Tax Types to Company Codes
I hope this helps.
Mauri

Error F5 702 while trying to post a parked document in MIRO

Hi,
Our Client is in SAP Version 4.6c, and a document is parked and we are trying to post it, it has two cost centers and one G/L account. We have applied SAP Notes related to this error and our client has applied Support packs also.
How to overcome such an error and post this document?
Is it relating to rounding errors, we get a amount difference of 0.02 and SAP does not allow the invoice to be posted.
Can anyone help?
Regards,
Anitha

Hello Raju,
Its a invoice which the user posts via a MIRO.
I can do it with a FM also, U r right.
There have been lots of issues with rounding values when trying to post a parked document in MIRO , till now such invoices were getting posted. Now, we r getting errors, just trying to find if someone else had encountered with a similiar problem and what was the approach they used?
we get a value of 0.02 difference when trying to post via MIRO for some invoices, till now such invoices were getting posted. Its purely a functional issue though.
We checked the invoice also, its prefectly fine. There does not seems to any issue, just wondering if there has been any exchange rate problems etc...
Thanks,
Anitha

How to park document with reference?

Hi All,
We have function to post document with reference in SAP but how about park document with reference?
Can anybody help me?
Thanks n really appreciate

Thanks for your reply. Fyi, I've applied employee limitation to post manual journal at tcode OBA4 and OB57.
User A : >100K - 500K
User B : >500K - 1 MILL (Asst. Manager)
User C : >1 MILL (Manager)
Normally user A will park all the journals but after apllied the limitation, user A only can park for the journal (normal tcode F-02 or other tcode) which not more than 500K. The limitation affect the park as well.
Alternative for tcode F-02:
User A : Park doc at FB50 (any amount) and post at tcode FBV0 by other user. There's no park or post with reference.
User request to park with reference.. Any idea?
Thanks friends

Mass Processing (Posting) of Parked Documents

Is there any some standard functionality to post (in mass) a set of parked documents?
Regards
Sreenivas

Yes indeed! Execute T Code FBV0, give your selection criteria and execute - in the following screen, you can select all documents and click on save (Ctrl+S) to post all parked documents in the list. Alternatively, you can use the 'Create Batch Input' option to generate a batch input session and then post it using T Code SM35.

Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

Error 'Specify account number' while posting a parked document through FBV0

Hi,
I am getting an error 'Specify account number' while posting a parked document through transaction FBV0.
I am not able to figure it out as to what account number it is referring to. Since the document is parked I assume the GL account used has no problem. Please help.

Hi,
Try to change the Account number and then save or post the data. I think Once We Parking the Document it wont allow to post the data without changing.
Try same scenario in the development its be useful
Regards,

Posting A Park document of year 2005 in 2007( Error message no. FP 041)

Hi All
I have a parked document in year 2005 and know the user want the same to post in 2007. while changing the header(posting date and making as 01.01 2007) through T.code MR44.
I am getting the following error.
Changing of document number or fiscal year not possible here
Message no. FP 041
Please let me know whether i can post a parked document of 2005 in 2007.
or any way to rectify the same.
regards
Ramesh

How can we change a parked document's fiscal year?
I parked a document in fiscal year 2011, period 01. now I want to post it in fiscal year 2010, period 12.
When I use FBV2 to change header information, it shown up an error message:
Changing of document number or fiscal year not possible here
Message no. FP041.
How can I do now?
Thanks.

Error messege BP603 while posting the parked document budget exceeded

Hi ,
We are having the budget function and its for overall release.
Budget has been relased and assigned value is less then the released budget in all conditions.
Its throwing the error messege No BP603 while posting the parked documents. Unable to understand the reason why its behaving.
Please let me know if anybody has faced such problem.
We are into ECC6, EHP 4 and the SAP note 557431 is not going to help anyways.
Regards
N.Raju

Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu

BAPI_ACC_GL_POSTING_POST is not posting a parked document

Hi,
I am trying to post a parked document using BAPI 'BAPI_ACC_GL_POSTING_POST' but its giving an error 'Balance in transaction currency'. I am providing the document number of the parked document in the header data of the BAPI and providing G/L details(Debit) where the document will be posted. The parked document already contains the credit entry i.e. vendor number and the amount of the invoice. So in the BAPI, I am just entering the Debit amount and the G/L. But its giving the error. Has any one posted a parked document using this BAPI or any BAPI. I want do the same thing as we are doing through transaction 'FBV0'.
Your help will be appreciated.
Thanks,
Padman

- Call transaction SM13 after calling your BAPI, to check if some update tasks are waiting or running.
- Did you check BAPI BAPI_CASHJOURNALDOC_CREATE ([Note 616804 - FBCJ: BAPI for saving cash journal documents|https://service.sap.com/sap/support/notes/616804])
- For extension in BAPI accounting, check [Note 487722 - Using EXTENSION1 for accounting BAPIs|https://service.sap.com/sap/support/notes/487722]
- For general information on ACC BAPI check [Note 306504 - Collective note: BAPIs for the AC interface|https://service.sap.com/sap/support/notes/306504]
- If data is already in FBCJ, look at FM FCJ_POST_ALL and FCJ_POST.
Regards,
Raymond

Posting the MIRO Document with reference of PO

Hello friends
while user posting the MIRO Document with reference of PO , he is getting difference in balance
Total amount is 31,237.00
Posting amount is 28,320.05
Balance amount is 2,916.95 this balance amount not getting post in MIRO
Before that i have seen GR amount is 28,320.05 but In IR amount same 28,320.05 but withholding tax tab not appering withholding tax amount
Can any body please help me on the same
Regards
sudharshana vamsi
Edited by: asuvamsi on Feb 24, 2010 1:43 PM

Hello friends
Thanks For all my problem was resloved
Solution is
An message has been occuring like withhold tax has been refreshed. it is just an information message not an error message. this message will trigger when the trans. type is non project type activity. No back end process has been disturbed due to this message. it just passing the information to the user.
we changed the trans. type to manufacturing activity and it is working fine.
I hope it ll help in future
Thanks and Regards
vamsi

Not able to post a parked document in G/L

I created a G/L document using FB50. After Simulating it I parked the document. When I try to post the document using FV50, the "Post" tab is not active in the parked document. Can anyone suggest how to post this parked document?
Regards

No matter what transaction you use, the Post command will show as greyed out.
That's simply because to post the parked document, choose the icon "Save as completed" either from the screen icon, or from the top menu (Document --> Save as completed).
The document will be saved and effectively will be posted. You can then go to FB03 (or any other view txn), and use the same document number to view the posted document.
Rgds
Gulshan

BAPI for Posting the WIP document with respect to profit center

Hi All,
as per the SAP standards SAP posts the WIP revaluation to the profit center of the subcomponents instead of profit center of the manufactured material..
But now i have write a logic to make correcting entries for WIP revaluation to the Profit Center of the Manufactured Product.
I have to Post an accounting document with the adjustment posting (Revaluation Document) as of the last day of the Period.
If the Revaluation Amount is POSITIVE, the DEBIT is to Profit Center of the Manufactured Material and CREDIT is to the Profit Center of Subcomponent Material/ Activity.
If the Revaluation Amount is NEGATIVE, the CREDIT is to Profit Center of the Manufactured Material and DEBIT is to the Profit Center of Subcomponent Material/ Activity.
Can any one suggest me the Function module which available to post the this type of document ?
Regards,
Praveen

Hi Ajit,
My requirement is to get the total of GL balances for the respective profit center.
But in Report i didn't found profit center parameter.
Thanks

Reg:how to post the parked documents using BDC

Duplicate message in General deleted. Please do not post the same question in more than one forum.
Hi
I am creating parked Documents using FV50. I am able to check them using FBV0, I am able to select and post the documents using the same transaction. Its working fine. However I want to post the selected parked documents using BDC. I am having problems as the output in FBV0 is in ALV report format. HAving problems selcting the parked documents to be posted. As there any way to post the selected parked documents using BDC.
Please suggest me a solution for this.
Thanks,
Satish
Edited by: Matt on Dec 3, 2008 7:40 PM

Hi Rob,
Thank you for ur reply, can u send that code how u post the parked documents using BDC for FBV0 transaction. Please send the code.
Thanks,
Satish

Posting a parked document with a BI session

Similar Messages

Maybe you are looking for