Posting Block in applications

Hi guys,
how to create posting blocks other than lockin users out and selection restrictions in inventory, sd, and other applications.
Blocking Orders say in oli7bw doesnt really post new
documents right, whats the relevancy of it.
Your help is greatly appreciated.
Thanks.

if your delta is initialized and a doc is changed then yes you will capture the change
the point is that you could end with double extraction: once with your init and once because y doc has been changed...
so the procedure should be:
1. init your delta
2. right after start your SETUP with blocking documents
<at this stage, user will only be able to create NEW documents which you will capture with your delta>
3. at the end of the SETUP the docs will be released and any change will be captured as well
This ensure procedure enable you to fill the init table and avoid duplicate information extracted to BW.
hope this clears your doubts
Olivier.
Message was edited by:
        Olivier Cora

Similar Messages

  • Posting block in Inventory Mgmt

    Hi guys,
    what is this posting block which comes
    up in material movement recompilation
    run, elaboration is of need.
    Thanks,
    Due points will be assigned

    Hello ViJaY,
    I read Roberto's reply and made some sense,
    I.e. While filling the setup tables there are chances of getting duplicate records into it as the other LO applications update the data while running the setup.
    To avoid this, we use the Posting block concept, here u will give the From and To dates so only the records related will be filled in the setup tables. Till this job completes no other postings will be allowed.
    Also, Inventory links with many applications like MM / SD / PP, etc. Inorder to avoid the updation from other applications we follow the concept 'Posting block'.
    Roberto, Am I correct ? could u give us more info ?!
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • How to block ultrsurf application.

    Dear All,
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin-top:0in;
    mso-para-margin-right:0in;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0in;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:Arial;
    mso-bidi-theme-font:minor-bidi;}
    Dear All,
    How can I block Ultrasurf Application?
    I have configured Cisco ASA 5520 with Cisco CSC-SSM module.
    I have blocked everything Except Business and banking activities.
    But user can access A 2 Z traffic  through Ultrasurf.exe application. which bypasses all possible firewalls.
    How can I blocked this application?
    Any solution??????????????
    Thanks
    I.A

    Hello Eric,
    Sorry, for not updating the post recently. I resolved the issue.
    I created a custom url category, created a decryption policy and put the action "Decrypt" for this custom url category as mentioned in the kb article.
    I put the action Decrypt also for the uncategorized urls and tested it for a user standing only in one AD group. It worked. The skype traffic was blocked.
    It worked also when I excluded this custom url category from this decryption policy and put only the "Decrypt" action for uncategorized urls.
    Thank you for all your support Eric,
    Have a great day
    Ilir

  • Want to block P2P application using ASA5540

    I want to block P2P application & IM using ASA with IPS built-in. I dont wanna use the ACL for all the ports because most of the P2P application using dynamic ports.

    Aamir,
    You can do this using the application layer inspection on the firewall.
    Please take a look at the configuration guide given below.
    http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_2/conf_gd/firewall/inspect.htm#wp1479354
    Rate this post, if it helps.
    Cheers
    Gilbert

  • Modal dialog limiting the mouse pointer and blocking all application

    I wanted to create a modal dialog that blocks all application in my desktop. Only password field be present and exits only if correct password is typed. I also wanted to limit the mouse pointer within the window of the modal dialog. Will that be possible? i have read modality feature of Mustang(beta) and notes there that system modality is not included. Can anybody there give me an idea how to do tricks on blocking all applications of the desktop? I will be much grateful to anybody who could solve this problem. Thnx in advance...

    tnx Sarcommand ..i give up on that, i understand the risk if that feature is included..
    all i wanted is to make an internet cafe client/server that blocks the client's pc interaction if log time is reached.blocking only the keyboard and mouse.
    i have seen so many softwares sets the cursor position within the dialog bounding box only with user and password there. though my other application runs the mouse is still captured on the dialog even the dialog lost focus.
    if that would not be possible I'll just send notification to the client, a dialog that does not block any application.
    now, im going to try if the client can do som action whenever the server sends alert if the client java app is not the focus. i will post next time what hapens.but if you tried already, if u dont mind posting it so others could know it also..
    tnx so much Sarcommand..

  • Block number applications

    Good day B-Berry users. Im new to the boards, so excuse me if this has already been asked.
    I have heard from a few semi reliable sources that , depending on the handset, some block number applications are available. Is there any truth to this, as I am in desperate need of some security from unwanted calls. Thanks for any help1!!!
    Solved!
    Go to Solution.

    look at iCallManager and BlackandWhiteList
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Why can not freeze book inventory Storage location and Posting block?

    Hello,
    I tried to freeze book inventory storage location and posting block at storage location level in SAP.
    1) OMBP -> "Freeze book inventory storage' is checked at that storage location.
    2) MI01 -> the 'Posting Block' and 'Freeze book inventory' in the Physical Inventory Document  is checked.
    3) Post the Physical Inventory Document by using MI02.
    But, I am still able to post inventory movement at that storage location after executing the above.
    (I run MB1C with movement type 501 at that location.
    I input the material number which are in the created Physical Inventory document.
    The posted manterial document is created after I run MB1C.
       The document date and the posting date in MB1C are the same date of Physical Inventoery Document.
    I can see this material inventory movement from MB51!! )
    My question is:  Why SAP is allowed to execute the inventory movement after the 'freeze book inventory storage location' and 'Posting block' are checked at OMBP and MI01 ?
    Any idea?
    Help me, thank you.
    Regards,
    Sylvia Chen

    Problem solved.  Thank you for all help!!

  • Webutil_host.blocking procedure blocking the application intermittently

    we are using webutil_host.blocking procedure to open a word document and have the application blocked until word document is closed. It opens the word document fine but blocking the application intermittently. Since it was not blocking intially, I started debugging and tried recompiling the form. It is now blocking the application fine, with no change in the code. It is definitely not the recompilation that made the trick because I compiled the form many times earlier while I was working on other parts of the form. Please share your expertise if anyone had the same issue.

    we are using Forms 10.1.2.0.2 with Webutil 1.0.6

  • F110 - Error Msg "No payment due to delete flag or posting block"

    When I use F110 To auto payment a AP open item, the system show the message "Vendor <Vendor Code> <Company Code>: No payment due to delete flag or posting block" in job log.
    The AP open item information :
    amount 480.
    bline date : 2008/09/29
    payment term : immediate payment
    due date : 2008/09/29
    vendor payment method : E
    D : expense 480
       C : AP - <Vendor Code>  480
    The parameter in F110 :
    run date : 2008/11/10
    indentification : TEST
    Parameter :
    posting date 2008/11/10
    docs entered up to 2008/11/10
    company codes : <Company Code>
    pmt meths : E
    next p/date : 2008/11/11
    vendor codes : <Vendor Code>
    I don't understand the mean of "Vendor <Vendor Code> <Company Code>: No payment due to delete flag or posting block", how should I payment this AP open Item by F110.
    Best regards,

    Hi Eric,
    Seems like your vendor has been blocked at company code level for any further posting. Try and check with transaction code FK05 or XK05.
    If it's blocked then just unblocked it and then try run your payment run.
    Cheers
    Samir

  • FRM-40737  How can I execute a query in a post block ?

    Hi,
    I have two blocks based on the same table. Then it is not a 'real' master detail case. The first block contains two fields who are the values in the where clause of the second block. In which trigger or where do I place the EXECUTE-QUERY ? I can't place it in the post-block because post-block don't accept EXECUTE-QUERY and I dont want to use a timer because it bring me some troubles.
    Than'k you !

    I have two blocks based on the same table. Then it is not a 'real' master detail case. You can easily create a master-detail here, if your data model allows it. A table can have a foreign key relation to itself. E.g. emp.manager_id if the fk to emp.empno.

  • Http post from an application with file attachment

    Hi ! I didn't know where else to post this message...
    I'm trying to make a HTTP POST from an application and upload a file with it. I have no problems with the posting, just that I haven't got any ideas how to get the file uploaded as well. I've been reading loads of examples regarding the topic, and searching older posts the forum here, without any help.
    Here's the method i'm using:
                   // open connections
                  URL url = new URL ("TheURL");
                   URLConnection urlConn = url.openConnection();
                              // We do input & output, without caching
                   urlConn.setDoInput (true);
                   urlConn.setDoOutput (true);
                   urlConn.setUseCaches (false);
                              // multipart/form-data because we want to upload a file
                     urlConn.setRequestProperty ("Content-Type", "multipart/form-data");
                  // Open output stream
                     DataOutputStream printout = new DataOutputStream (urlConn.getOutputStream ());
                  // Set the actual content
                     String content = "upfile=" + System.getProperty("user.dir") + "\\file.ext&";
                       content += "other_key-value_pairs";
                  // write the data to stream, and flush it.
                     printout.writeBytes (URLEncoder.encode(content));
                   printout.flush ();
                   printout.close ();
                   // Get the response.
                     DataInputStream input = new DataInputStream (urlConn.getInputStream());
                   FileOutputStream fos=new FileOutputStream("postto.txt");
                   String str;
                     BufferedReader bufr = new BufferedReader(new InputStreamReader(input));
                  // Write response to outputfile
                     while (null != ((str = bufr.readLine()))) {
                         if (str.length() >0) {
                         fos.write(str.getBytes());
                         fos.write(new String("\n").getBytes());
                   input.close ();Now, the response here I get from the url i'm posting to is "Failure, no data-file". I've tried many diff methods of writing the file to the stream, but always get the same result.
    I need to file attached like it would be when using a HTML form's <input type="file">.
    Please help ! This is getting really urgent !

    String content = "upfile=" + System.getProperty("user.dir") + "\\file.ext&";
    content += "other_key-value_pairs";
    printout.writeBytes (URLEncoder.encode(content));
    printout.flush ();
    printout.close ();Actually, what this does is create a request like:
    GET /path/to/file/script.language?upfile=/home/user/file.ext&other=params HTTP/1.1
    Content-Type: multipart/form-data
    -- And other HTTP params --
    The file is not actually appended to the request.
    I really don't know how Java handles the file upload, but you could do it by hand, like so:
    public static void doFileUpload(String url, String filename, Hashtable params) throws IOException {
        // Construct the request
        String boundary = "----------------------mUlTiPaRtBoUnDaRy";
        String request_head = "POST " + url + " HTTP/1.0\r\n" +
                                         "Content-type: multipart/form-data; boundary=" + boundary + "\r\n";
        String request_body = boundary + "\r\n\r\nContent-disposition: form-data; name=\"upload\"" +
                                         "\r\n\r\n";
        BufferedReader in = new BufferedReader(new InputStreamReader(new FileInputStream(filename)));
        int b = -1;
        while((b = in.read()) != -1) {
             request_body += (char)b;
        in.close();
        Enumeration keys = params.keys();
        while(keys.hasMoreElements()) {
            String key = keys.nextElement();
            requst_body += "\r\n" + boundary + "\r\n\r\nContent-type: form-data; name=\"key\"\r\n" +
                                    (String)params.get(key);
        request_body += "\r\n" + boundary + "--\r\n";
        int length = request_head.length() + request_body.length() + "Content-length: \r\n";
        String req_length = "Content-length: " + (length + new String("" + length).length()) + "\r\n";
        Socket socket = new Socket(url,80);
        PrintStream stream = socket.getOutputStream();
        stream.print(request_head + req_length + req_body);
        // And now an option to read the response, I will omit that...   
    }Note: I have not tested this code, just wrote it up out of memory. If it does not work, it will propably need some small fixes.
    Tuomas Rinta

  • I want to block gambling applications on my iphone as i have a gambling addiction

    I want to block gambling applications on my iphone as i have a gambling addiction

    If you look in Settings-->General--> Accessibility, you will see there is an option called "restrictions" or something like that.
    Ask someone who knows you to set up a code unknown to you and select in apps to authorize only 4+, 9+, 12+ and 17+ apps, since gambling apps should be available to only 18+

  • Posting block Question in How to handle inventory management scenarios

    Hi all - I have a question in document
    <b>"How to...Handle Inventory Management Scenarios in BW"</b>
    can anyone please tell me what a posting block is in this document...
    also I did not understood what a Validity table is?
    thanks,
    Sabrina.

    Hi Sabrina!
    A 'posting block' period is something that now you are facing in inventory management, but you have to consider it in ALL logistic cockpit flows (what you can see in LBWE).
    This requirement can be easily explained in this way: as you know, to fill a setup table you have to activate the extract structure of the datasource for which you want to run the setup job (otherwise the system says that no active extract structure exists, do you remember ?); but, by doing so with the posting operations open (in other words, users can create new document or change the existing ones), you run the risk that these records are automatically included in the extraction queue (or in SM13 if you are using unserialized method) AND also collected in setup table ! And you will have the same records with the initial load (from setup table) and then the same from delta load (from the queue): a nice data duplication.
    To avoid this situation, a "posting block" (or a "free-posting period" or a "downtime") is requested. No one can post new document during your setup job...
    Hope now is clearer...
    Bye,
    Roberto

  • Minimize posting block time

    Hi Gurus,
    we are using inventory management in BW 3.5 , the data is loaded from SAP R/3 . for every maintenance operation in data sources (2LIS_03_Bf, ...) or upgrade, we have to do initialization in the R/3 side that means blocking all stock movements during the initialization (~ 8 Hours!) this situation is very inconvenient for the users.
    have you any solution to minimize the posting block time?
    thank you.

    hi,
    Thank you Dhanya, so if i get it right it's possible to have zero down time during setup and initialization with this method :
    1. delete data in infoprividers in BW
    2. Delete setup tables and delta queues in R/3.
    2. Run init from BW with no data transfer (supposition: this will setup delta queues).
    3. Run setup tables filling in R/3 (supposition: all documents posted while this operation is going on will be stored in delta queues)
    4. Run full repair load in BW
    5. Run delta load in BW.
    is this right?
    how about compression with and without marker update mentioned here? [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
    we are using first scenario : Inventory management with non-cumulative key figures.
    Thank you.

  • Posting block check in MI31 transaction

    Hi,
    I have done following steps -
    1. Create inv document using MI31 with posting block check box selected. Step OK.
    2. Doing 311 using MB1B - System prevents me from doing this movement. Step OK
    3. Doing MI04 Step OK
    4. Again doing 311 using MB1B - System prevents me from doing this movement, but with only one material.
    If I am trying with other material, after MI04, I am able to do movement type 311 move using MB1B.
    What is that it prevent me from doing 311 activity will that material after MI04?
    Any input is appreciated,
    Regards,
    Dipak

    not fully correct. the posting block is erased whenever you enter a count, it does not matter if your count matches with the book quantity or not.
    The purpose of the posting block is to prevent entering movements in SAP while a phyiscal inventory is active. This is only one side of the medal. The other side is your organisation of a physical inventory. Here you have to take the same measures, you need to prevent people from moving materials until you have finished your count.
    Once you enter the count, then SAP is just certain that the count has finished and the block is no longer needed.
    If you counted correctly, then you will not move more than you counted, hence you will not have any issue if you post the difference some days later.

Maybe you are looking for

  • SAP BPC 7.5 SP3 and Citrix Entering Data through BPC Client and Citrix

    Hello BPC experts, my client is using SAP BPC 7.5 SP3 in combination with Citrix. We are having problems now, while entering data through the BPC Client (installed on BPC Server) and the BPC Client (running on Citrix). When we enter data through the

  • Purchase Order is Finally Closed

    Hi to All, Question: If a PO is finally closed. And the receiving department incorreclty received the items. Is there a way to fix the receiving qty after the PO has been finally closed. thanks in advance for help on this matter.

  • Strange object formed when saving camera-RAW file as TIFF

    Perhaps someone has a clue as to what the strange circular object  seen on the picture below might be (on the upper-left area of the  photo), because I have no idea. My best, yet  uninformed, guess is that this is an electronic random generation of 

  • Hard Drives and Macbook Pro

    Say I want to install a program that is over 50 Gigs and I don't have enough room on my internal hard drive to do that. Is it possible to install that program onto the external hard drive and open the program from there? I'm thinking of installing Lo

  • Dynamic invoking web service via uddi regitry server

    Hi, I need to call the web service dynamically after searching from the UDDI Registry Server. pls give me some reply that how to call the web service dynamic. Thnx in Advance. [email protected]