Posting Block in Quality Inspection Material

I have one requirement in QM Module as my client wants to Block the payment for the Materials which are under Quality Inspection as there are several materials got paid without Quality Clearance.
I have changed Control key 0007 - Invoice Block, Message Code- Warning.
Can there be any setting which will throw the message that material is under Inspection.
Please advice on SOS basis.
Rgds,
Pradeep

Thanks for reply but my client wants to <b>Block the payment for the Materials</b> which are <b>under Quality Inspection</b> as there are several materials got paid without Quality Clearance.
I have changed Control key 0007 - Invoice Block, Message Code- Warning.
Can there be any setting which will throw the message that material is under Inspection.

Similar Messages

  • Purchase ledger invoices that are blocked for quality inspection.

    Purchase ledger invoices that are blocked for quality inspection.When invoices are keyed against a stock item that is required to be checked for quality the invoice automatically blocks. Once the check has been carried out and the batch has been released the invoice should automatically release for payment according to terms, however this is not happening.I checked MSC3N,where batch is in unrestricted and status released.Still in material document shows batch in QI.
    Can any one what is the problem.

    Hi
    check in MMBE where the material is lying under the batch .Is it under QI or Unrestricted.
    from QI07 you can put it into Unrestricted or take the UD of lot if generated.
    please revert back
    Regards
    Sujit

  • Error - Invoice is blocked for quality inspection.

    While making payment to vendor the error shown - Error - Invoice is blocked for quality inspection.
    Can anybody help ?

    This is caused by customizing of QM in procurement.
    You can only pay if the material is released from quality status.

  • Storage location extension for Blocked and Quality inspection stocks

    Hi All,
    Could any one explain how to extend a Storage location (which is actually maintained for the Returns) to make use for the Blocked and Quality inspection stocks. Does this require any config settings.
    Thanks in advance.
    Kalyan

    Hi,
    Thanks for the Reply.
    Let me be more clear,in describing my requirement. Actually the present Storage location is maintained for only Returns. But in addition to this I require to make use of this storage location for the purpose of the maintianing Blocked Stock or QI stock.
    Therfore to achieve above what are necessary steps or do i need to maintain any config settings for this.
    Thank You,
    Kalyan.

  • How to control quality inspection material to do Invoice verification

    I want to control on which matrial is in quality inspection, I want to bolck for IV. whenever the material not cleared from QM till invoice verification will not done. if clear from QM then IV will process.
    thanks

    Hi,
    If QM is active , you can do that by using suitable QM control key in QM view of the Material master.
    This will allow you to post the invoice , but will stop the Payment for Quality reasons. Once Quality clears the inspection lot, you can clear the invoice block (MRBR) & do the payment.
    But this can be done only if QM is active.
    Refer the link below
    invoice block
    Regards
    K.M.Arun

  • Transfer posting stocks from quality inspection to unrestricted, problem

    Hello Guys,
    kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
    please advise me the correct way to settled this.
    thanks and regards,

    Hello Guys,
    I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
    Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
    Regards,

  • GR blocked to Quality inspection

    Dear Experts
    i have made goods reciept by 103 into GR blocked stock. now i want to make goods reciept to quality inspection . which movement type should i use.

    Did you maintain Quality Management view in Material Master??
    If QM View is maintained in Material master then Release GR Blocked Stock using 105 Mov type then Stock will go to Quality Inspection Automatically.
    Further You can do Usage Decission thru QA32....

  • How many TO need to create for Quality inspection material

    Dear all,
    When we do GR's ,TR is created & material is goes for quality inspection .
    So after UD, PCN is created so for this PCN we need to Create & Confirm TO.
    So my question is what we do for open TR which was created after GR posting.
    DO we have to create TO for this TR.
    I mean how TO get's created in this process?
    Please help me out.
    Regards,
    Rock

    what do you do physically?
    a) do you keep the stock in goods receipt area until it is released from the Q status
    b) or do you putaway that stock into its destination bins before it is released from Q-status
    in both cases you use the TR that was automatically created during goods receipt to create the TO.
    in case a) you just execute LU04 to process the posting change notice to change the stock status from Q to unrestricted  prior to creation of the TO.
    in case b) you create the TO directly and process the PCN in LU04 later when the usage decision was made.
    part B can create some difficulties (especially if you setup automatic processing) as you may get several quants because the material need more than one destination bin, while you just have 1 quant in the GR area 902.  So SAP may not be able to determine the quant that needs to be released from Q status by itself, and user has to select those quants manually.

  • How to post stock in quality inspection

    Hi all
    we want to post stock in quality by using MB1A t_code

    Hi,
    Activate the QM in Material master for your finished product, as soon as the goods movment is done from PP for the finished prduct the material will move in the quality stock.
    Hope its useful.
    Reward points if useful.
    Thanks..

  • Purchase order GR need to post to Quality inspection stock

    Hi all,
    How to post stock to Quality inspection directly for a PO. Even though in GR i make sure that its posting in Quality inspection, by default it is going to Urestricted stock. How to fix this by posting stock to Quality inspection directly?
    Thanks,
    Avani.

    Hi Avani,
    Pre-requesite:-
    QM should be live at plant level.
    Data toeb maintained in QM view.
    You need to activate inspection type 01 (For GR against Purchase Order) and 04 (For GR from Production, against Process Order) in QM view of Material Master. Doing this all the GR quantity will be posted in Quality stock automatically.
    If QM is not live, you need to activate the "Post to insp. Stock" inidicator in Materail master QM view.
    Update us to help you more, reward points to help you better!!!
    Regards,
    Shyamal

  • Quality inspection stock for a vendor

    Hi,
    When receiving material against PO for a vendor, stock should get posted always in quality inspection for this vendor. This requirement is only for particular vendor, not for all. If in material master, QM procurement key is active, then it will be for all vendor, which is not required.
    Please suggest.
    Regards
    parag

    please check the vendor purchase view, there would have been a check mark.or may be the check mark in the info record.

  • How we may by pass quality inspection during PO creation

    Hi Guru,
    How we may by pass quality inspection via selecting document type in the PO. User create dummy PO in multi level marketing indsutry in order to achieve points & awards during month end. Since all the materials subject to quality inspection, material in dummy PO also falls under quality inspection. For your kind information there is no physical movement or GR for this dummy PO. It's just created in the system as I mentioned the purpose the above. I already created seperate document type to diffrentiate this scenario but looking forward how we may by pass quality inspection for this document type. Or is that any t/code which can by pass quality inspection during PO creation. Please advice. Thank you.
    rgds,
    nantha

    Dear Netto,
    As I said before user need to create dummy PO & must do GR in order to get the rewards & bonuses. User do GR in the system but it doesn't involve material movement. My question is how we may by pass the quality inspection for said GR since physically no goods involved.
    Dear JS,
    For your kind information this material subject to quality inspection & it has been set in material master. I tried one more as per your advice. System post this GR to quality inspection eventhough I change to unrestricted use in PO & GR as well before posting maid. Quality Inspection is auto defaulted for said material. Quality inspection is requirement to most of the goods so I can't change that. I'm wondering how we may by pass this just for dummy PO & GR.
    I believe this clarifies your queries. Thank you.
    rgds,
    nantha

  • How to use quality inspection stock

    Hi,
    Plz tell me How to use quality inspection stock.can i use quality inspection stock for any transaction directly.
    Now i have 100 quality inspection stock is there.but i am not taking these stock to unrestricted use stock.i want use these stock to all transaction like 301,303,309.......
    it is possible or not

    hi
    Use t-code MB1B to transfer stock from quality inspection - unrestricted-use stock
    Movement Type 321 Transfer posting stock in quality inspection - unrestricted-use stock
    The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here you can post the quantity to another storage location.
    You cannot use this movement type for QM-managed materials since transfer posting for these materials takes place via the usage decision.
    Possible special stock indicators: E, K, O, Q
    u2022 K Goods receipt for purchase order to consignment stock
    u2022 O Goods receipt for purchase order to stock of material provided to vendor
    u2022 E GR for purchase order or order to sales order stock
    u2022 Q GR for purchase order or order to project stock.
    regards
    Vishal

  • Stock Type "Quality Inspection" on the Purchase Order

    We would like to use the quality inspection stock type in the purchase order; so when are users go to receive the materials it would automatically post them to quality inspection stock.  We are trying to do this without using alot of the functionality in QM.  My question is, in transaction MIGO it normally uses movement type 101.  When we try to receive the materials we get this message:
    "Account determination for entry 0010 BSX ____ ___ 7920 not possible"
    My questions is, are we using the correct process/movement type.  We have been researching this but have not found much detail on the movement type 101 for this process.
    We realize we can use movement types 321 and 322 in MB1B to move the product.
    Any suggestions would be helpful.
    Thanks,
    Mark

    Hi,
    The message you are getting is in no way related to the Quality inspection stock. You can check this by changing the Quality Inspection stock type. The message is related to valuation class entered in the mateiral master. Pl. check your system configuration for valuation class indicated (7920) in transaction OBYC (for GBB - BSX). This setting automatically determines the G/L account to which the FI entry should be posted at the time of posting GRN.
    If you maintain correct G/L account entry for valuation class 7920 in transaction OBYC for GBB - BSX, your message will disappear & you will be able to post GRN.
    Regards,
    Prashant Kolhatkar

  • Material rejected through quality inspection lot goes to blocked stock

    Dear All,
    All materials that are rejected through quality inspection lot should go to blocked stock. My client want to generate a report for viewing what all materials are rejected. How can do that?
    scenario2: If the materials are rejected then can they be automatically  be sent back to the vendor (return to vendor). if possible
    pl send me some suggestions...!!!
    pl discuss

    Hi,
    See  mvt of material directly to blocked stock u can do by setting the Selected Set of ur specific UD code. in QS51/QS52. there is one column near to code, set R=rejected and set that field "BloCked Stock" . Define there and execute ur transcation, whenever u provide an UD system automatically post the stock in blocked location.
    MCVX is the report where u can get the stock lying in blocked location, or for temp. purpose use QVI and developed the new report.
    regards

Maybe you are looking for