Posting date error

While I am trying to make entry in back date by selecting the back positng period for e.g. if i am in january and i want to pass any entry in december then i will select posting period of december. I can easily pass this entry in demo version of SAP b1 2004.2b but in licensing server its giving error that positing date is variates from the system date. Where is the error plase solve.

Hi Richa,
This is not a error, it is the validation of SAP B1, you do not able to post any entry for earlier date from system date.
if it is necessary for you to do this, you have to change your system date and do that task and againg change your system date to current date.
hope it will help

Similar Messages

  • Posting Date Error when using TPM10

    Hi, All
    I am using TPM10 to reserve the cash flows that were previously posted using TBB1.
    The problem occurs when I enter a different posting date (which I want to use as the reversal date) from the original posting date in TBB1.
    There is little information in the error message except for E:E:745 ...
    Has anybody had the same problem? Please share the solution.
    Thanks

    When you reverse the documents in TPM10, you have to specify the TRM Reversal Reason.  This reversal reason is tied to an FI reversal reason via configuration.  Within the configuration for FI reversal reasons, you can specify what posting dates are valid for the reversals.  Look up the TRM reversal reason config to determine the FI reversal reason.  Then look at the config for the FI reversal reason.  I suspect that the FI reversal reason does not allow alternative postings dates (i.e. the reversal has to be posted to the same day as the original posting.)
    The resolution to this issue is to use a TRM reversal reason that is tied to an FI reversal reason that allows alternative posting dates.
    Regards,
    Shannon

  • Service order posting date error.

    In DBM Service order posting date is taken from the controlling document because of that error comes as
    Document date 03.12.2011(Curent date)is greater than billing date 02.12.2011(Date given in Billing date in service order header)
    But this error is not coming in sales document..
    I need to post service order in the date i mentioned in the service order..
    How dould i resolve this issue..?

    Hi Arvind,
    there a many notes describing this problem:
    1474254, 1473093, 1422246, 1482159, 1588751, 1359333, 1658317
    Best regards
    Robert

  • Error in posting data to buffer: CL_RSPLS_DELTA_BUFFER_B unf Form READ-06-

    Hello,
    I have a problem in executing functions in my planning folders which contain hierarchy variables in the filter of the function. 
    Whenever I run a SAP standard function which has a hierarchy variable in the function filter, I get an error meesage.  The function copies the values, and when it tries to post them to the buffer I get an error message and the planning workbook gets logged off from SAP.
    The message:
    u2022Programm Fehler in Klasse     SAPMSSY1 Methode: UNCAUHGT_EXCEPTION
    u2022Systemfehler in Programm      CL_RSPLS_DELTA_BUFFER_B unf Form READ-06-.
    It seems to me that there is an error in SAP which involves reading the hierarchy in my filter, this leads to the above mentioned error when the system tries to post the data to the buffer.
    System info:
    SAP NetWeaver BI 7.0
    We have patch level 20.
    Help regarding this problem would be appreciated.
    Regards,
    Julian

    Hello Gregor,
    thanks for your response.  The error is in the planning workbook, the transfer button doesnt work, but Save does work.
    The problem seems to be that I have a help query which runs before the plan query.  The help query has a Hierarchy user exit variable which the user cannot input values, this reads certain master data.  This is in the Static filter.  In the dynamic filter is an input hierarchy variable (same characteristic as the exit variable).  This receives the values from the user exit variable.  The input hierarchy variable is also in the Plan Query where I have the buffer error message.
    If I take the Hierarchy variables out of the help query and put them in the plan query, then it works, no error message.
    Conclusion:  it seems that the system has trouble posting data in the buffer if you have a hierarchy variable in the help query. (it works fine for non Hierarchy variables)  We debugged it, and the SAP program does not recoginize -06- assigend element in the program.
    Is there a SAP note to correct this?  I found one that was very similar to my problem but it is old, for level 10.  We are on patch level 20.
    Thanks for your help,
    Julian

  • Error in document date & posting date-- Posting period 001 2008 is not open

    hi guru's
    while doing vendor creation in XK01, i m not getting the data screens like address, ..etc.i m getting error..posting period not open". what does it mean..
    What date i need to give in both fields...?
    can anybody send a set of data for me to create a vendor to test for my bdc/lsmw?
    can any help me step by step vendor creation in xk01,
    I am getting this below....
    Posting period 001 2008 is not open
    Message no. F5201
    Diagnosis
    Period 001 of fiscal year 2008 is not open for posting for the variant of posting period 1000.
    System Response
    Processing cannot be continued.
    Procedure
    The error can have several causes. In order to eliminate the error, proceed as follows:
    1. Check whether the posting date was entered correctly. The system determines the posting period by means of the date.
    2. Check whether the required posting period is open for posting for the variant of posting period 1000 and account type +. Make sure that the period is open for posting.
    To do this, specify a period interval in which the required period for the variant of posting period 1000 and account type + is contained.
    Proceed
    thanks

    Hi
    Kris is right, that message means you can't post a FI document in the period 1 (probably Gennuary) of the 2008, but this can't mean you can't create a new vendor.
    So are you sure on trx?
    If the trx is right perhaps somebody has inserted a control in a user-exit.
    Max

  • Error while posting data from SCM to XI

    Dear Expertise,
    I got a requirement where I need to post data from SCM to XI server. From SCM
    side it is an ABAP proxy. When I tested the scenario and checked in the MONI of
    SCM I got an error. But SCM is correctly configured pointing to XI under Tcode
    SM59 (SM59 --> Connection Type H (HTTP Connection to ABAP System) -->with
    correct user credentials and PIPE line URL of XI server).
    Please let me know is this the correct settings for ABAP proxy for connecting
    from SCM system to XI system.
    Error Dump in SXMB_MONI:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Integration Server
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
      <SAP:P1>401</SAP:P1>
      <SAP:P2>Unauthorized</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
    <SAP:AdditionalText><!DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN">
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>HTTP response contains status code 401 with the description Unauthorized Authorization error while sending by HTTP (error code: 401, error text: Unauthorized)</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Thanks in Advance,
    Gujjeti

    HI
    Check these
    For Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
    Description: The request requires user authentication
    Possible Tips:
    • Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
    • If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
    • If the error is in Adapter Engine
    –then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
    • May be wrong password for user XIISUSER
    • May be wrong password for user XIAFUSER
    – for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message

  • While creating miro error message posting date 009 2011is not open

    sir
    while creating miro the error message is not open open for the posting date 009 2011

    Hi,
    The date format you have mentioned 009 2011 won't be supported by SAP system. Please enter it in correct format. If the format is OK an not working means MM posting periods are not open for this month this error will come.In MMPV give company code and specify the period to close  and save.Again go to same transaction open the period for this month. I hope this will resolve your issue. Thanking you.
    Edited by: Padmasri Garapati on Sep 16, 2011 6:58 AM

  • Maintaine error message if posting date is greater than Sch del date in PO

    I have maintained a delivery schedule in a PO for a material
    Say PO qty 100
    Del Schedule
    10.04.09  - 60
    20.04.09 - 40
    While GRN, for 60 qty, if posting date is greater than 10.04.09, system needs to throw error.
    I want to do it for selected materials only.
    Is there a way to do this.
    Regards,
    Rakesh

    Thanx for reply
    If I use OMCQ message , it will be applicable for all GRNs and I want for a particular set of materials.
    Can one please suggest User exits / BADi for the same. I have checkd BADIs but those are based upon MSEG and EKBE table.. and i dont have any material doc no before posting the document.
    requiement is to check the delivery sch date and posting date befor posting the document is posted.
    Any suggestions welcomed.
    Reagrds,
    rakesh

  • Error in document date and posting date

    hi guru's
    while doing vendor creation in XK01, i m not getting the data screens like address, ..etc.i m getting error..posting period not open". what does it mean..
    What date i need to give in both fields...?
    can anybody send a set of data for me to create a vendor to test for my bdc/lsmw?
    can any help me step by step vendor creation in xk01,
    I am getting this below....
    Posting period 001 2008 is not open
    Message no. F5201
    Diagnosis
    Period 001 of fiscal year 2008 is not open for posting for the variant of posting period 1000.
    System Response
    Processing cannot be continued.
    Procedure
    The error can have several causes. In order to eliminate the error, proceed as follows:
    1. Check whether the posting date was entered correctly. The system determines the posting period by means of the date.
    2. Check whether the required posting period is open for posting for the variant of posting period 1000 and account type +. Make sure that the period is open for posting.
    To do this, specify a period interval in which the required period for the variant of posting period 1000 and account type + is contained.
    Proceed
    thanks
    Edited by: Raji on Jan 23, 2008 8:21 AM
    Edited by: Raji on Jan 23, 2008 8:37 AM

    Goto
    T.code: OB52...open the posting period for your  posting period variant...
    Regards
    s.Baskaran

  • SYSTEM ERROR:NO Posted data for 5_CPR_EXTID 5(INCLUDE LCATS_ITSF 10)

    Hello Experts,
    CAN you please help me Regarding this error ,its very urjent for me.
    The problem is we are not able to create timesheet through ESS CATW transaction. In the below the link to the ESS Create Time sheet CATW is giving. Use the link to enter the ESS timesheet. Ignore all columns and use only A/A column and give any leave type.  When we enter the timesheet with A/A any vacation type and give number of hours and when we try to save or save and release button it gives a error message and it locks the user.
    The error message it gives is :
    <b>SYSTEM ERROR:NO Posted data for 5_CPR_EXTID 5(INCLUDE LCATS_ITSF 10)</b>
    Please Help me ....
    Thank you and regards,
    Durga.K

    Hi Durga,
    We have exactly the same error. Were you able to fix this? Any help is appreciated.
    Thanks,
    Doug

  • Error While Posting Data Through Tcode MM41

    Hi Experts,
    Getting error when entering article data through tcode MM41 :
    Following errors occurred while posting data :
    E M3 072 : Enter the RP type
    I m already entering RP type in both DC and store tab available on article screen.
    Thanks.

    Hi Friend,
    Youhave to enter for third time for your reference site say for example RFST and again third time i have to enter the RP.
    Idealy you should first maintain for reference site initially.
    eample I am maintaining MM41 for my store (site) so first at DC level and then at store level and then again when I accept to save the article at refercne Store level I have feed in the RP type.
    Hope this solves you query.
    Regards,
    Ashutosh

  • Error message "posting date is initial"

    I m getting error while adding material to pre-existing contract - "posting date is initial" (Message no. F5669).
    looks like Fiscal year and period cannot be derived.
    Please help. what could be the reason for this message
    SK

    Hi friends,
    I didnt do any manual changes. butthe posting period shows "0" value.
    I believe the system is not able to determine the posting period because it could not find any posting date.
    but not sure why so. because there are 17 materials entered in the same contract some time back.
    And now its erroring out.
    Note: i m working on 4.7 system

  • Webservice giving error "couldn't post data to " in adobe interactive form

    Hi Gurus
                     My requirment in to place a submit button in adobe interactive form , when the user clicks on it the data in the form has to update the table. For this purpose i have configured webservice in my crm 2007 server. Now webservice is working and i m getting the response. but when i create a data connection in the adobe form and when i execute the webservice i getting " Couldn't post data to ". "
    error . Plz help me out to resolve this issue
    Thanks in advance
    Regards
    Johny

    Hi Jhonny,
    Make the Submit button a regular one instead of execute and place the following code in the click event(JavaScript).
    var cURL = "Provide the Soap Address url which is present in WSDL";
    var service = SOAP.connect(cURL);    
    xfa.connectionSet.DataConnection.execute(0);
    Regards,
    Mathan

  • Error when posting date in future in MFBF of REM

    Good day,
    System should give an error when the posting date is in future while doing Backflush thru MFBF in REM(repetitive mfg)
    Suggest...............

    HI
    Also check this BAdi. WORKORDER_GOODSMVT
    i have implemented the  same with one of these two BAdi but sorry not remember which one i have used. but sure with one of these two can solve your issue both in MFBF and MF42N.
    code goes some thing  like sys-date>posting date BUDAT system gives error posting in future is not possible
    Regards
    Anuapam Sharma

  • Error while running Tcode F.2E 'do not enter a posting date'

    When running the transaction F.2E I am getting an error abort message saying "'do not enter a posting date'".
    Please let me know what would be the reason why I am getting this error.
    Thanks
    Bala

    Hi,
    that transaction is used for reconciliation of associated companies, its no longer available, use TC - FB2E
    see below notes from SAP
    Program RFICRC00 for reconciling associated companies is no longer available as from Release ERP2004. The functions have been replaced by new programs. You can access these from the SAP application menu as follows:
    SAP menu -> Accounting -> Financial Accounting -> Accounts Receivable or Accounts Payable -> Periodic Processing -> Closing -> Check/Count -> Cross-System Intercompany Reconciliation
    These programs provide more functions and flexibility, and they enable you to reconcile data across different systems.
    You carry out the Customizing for these programs in the SAP Customizing Guide under:
    Financial Accounting or Financial Accounting (New) -> Accounts Receivable and Accounts Payable Accounting -> Business Transactions -> Closing -> Count -> Cross-System Intercompany Reconciliation
    assign points if helpful.
    Reg
    Arun

Maybe you are looking for