Posting date for CM rebates via Extended rebate processing

Hi,
we have the following scenarios for an extended rebate processing:
1> rebate agreemetn validity period  = upto Sept 30 only
2> Settlement Date = Oct 5
3> CM posting date of the rebate is Sept 30
How is it possible to make the CM posting date to the current date and not the valid to date?

Hi Mark,
I'm not sure, but I understand that you want to change the value of condition while you are running it. Check BADI SD_ENH_REBATES, method V13A_VERIFICATION, I see that you can change I_E_KONP. I am never use it, only I know it, so I don't tell you what kind of troubles you can find.
I hope this helps you
Regards
Eduardo

Similar Messages

  • Display stock on posting date for a consignment stock

    Dear guru.
    I want to display the stock on posting date for a consignment stock (special stock indicator = "W" ) to display this stock and the linked movements  for a specific customer.
    MB5B donu2019t have the field customer in the selection view.
    What transaction can I use ?
    Thanks in advance.

    Hi,
    In MB5B in special stocks indicator you select W
    and select special stock
    You will get it
    BR
    Diwakar
    Edited by: diwakarnd deshpande on May 20, 2008 7:02 PM

  • Need BAPI to update posting date for parked documents in transaction FBV2?

    Hi All,
    I am retrieving records from table VBKPF and I have to update the posting date for parked documents in transaction FBV2.
    I am doing it with BDC , working fine in foreground, but it is not workung fine in back ground.I want to do this with bapi.
    Can any one suggest me corrct BAPI?
    TYPES : BEGIN OF It_vbkpf,
             bukrs LIKE vbkpf-bukrs,            "Company Code
             belnr LIKE vbkpf-belnr,            "document number
             gjahr LIKE vbkpf-gjahr ,           "Fiscal year
             budat LIKE vbkpf-budat,            "Posting date
             bldat LIKE vbkpf-bldat,            "Document date
             blart LIKE vbkpf-blart,            "Document type
             xblnr LIKE vbkpf-xblnr,            "Reference
             tcode LIKE vbkpf-tcode,            "Transaction Code
             bktxt LIKE vbkpf-bktxt,            "Document header text
             usnam LIKE vbkpf-usnam,            "User Name
             xwffr LIKE vbkpf-xwffr,            "Release necessary
             xprfg LIKE vbkpf-xprfg,            "Document complete
             xfrge LIKE vbkpf-xfrge,            "Release takes place
            END  OF it_vbkpf.
    Thanks,
    Suresh.

    Hi ,
    Thanks for your response.
    PRELIMINARY_POSTING_UPDATE seems working good,But my requirement here , to update the posting date with last working day . how can i do this?
    thanks,
    Suresh.

  • SYSTEM ERROR:NO Posted data for 5_CPR_EXTID 5(INCLUDE LCATS_ITSF 10)

    Hello Experts,
    CAN you please help me Regarding this error ,its very urjent for me.
    The problem is we are not able to create timesheet through ESS CATW transaction. In the below the link to the ESS Create Time sheet CATW is giving. Use the link to enter the ESS timesheet. Ignore all columns and use only A/A column and give any leave type.  When we enter the timesheet with A/A any vacation type and give number of hours and when we try to save or save and release button it gives a error message and it locks the user.
    The error message it gives is :
    <b>SYSTEM ERROR:NO Posted data for 5_CPR_EXTID 5(INCLUDE LCATS_ITSF 10)</b>
    Please Help me ....
    Thank you and regards,
    Durga.K

    Hi Durga,
    We have exactly the same error. Were you able to fix this? Any help is appreciated.
    Thanks,
    Doug

  • Validate the posting date for profit centre documents actual/plan

    Hi,
    I have an requiremnt where we want system to validate the posting date for profit centre documents actual/plan, Functionality should be same as system check  posting period for FI documents maintained in OB52 and controlling cost centre documents posting period maintained in OKP1.
    For creating Profit centre document activity types are available in Tcode 0KEO.
    I have come across Exits EXIT_SAPLPC08_001 and  EXIT_SAPLPC08_002. But i am notsure whether we can use these and implement these.
    PLease suggest what can be done to achieve this.
    Regards,

    Hi,
    U can use subsititution and specify that the profit center could be your head office or the store as per your req...
    I think thats the only option we have..
    Cheers
    Raghu

  • System error: NO posted data for 4_CPR_OBJGEXTID 4 (Include LCATS_ITSF10)

    Dear experts!
    I use internet service transaction catw in release 6.0 and the following error occurs:
    System error: NO posted data for 4_CPR_OBJGEXTID 4 (Include LCATS_ITSF10) .
    Thank you in advance!
    Vana Sounta

    CATw is not supported in ECC 600 , You need to use new service of CATS, called record working time
    Please read the note 870126 and also refer help.sap.com about record working time

  • NO posted data for 8_CPR_EXTID 8 (Include LCATS_ITSF10)

    Hi;
    I haven't any idea how to find the reasonn of error message "NO posted data for 8_CPR_EXTID 8 (Include LCATS_ITSF10)"
    Could you give me any hint, please?
    Regards
    Krzysztof

    Hello Krzysztof,
    This error message is either an IAC template error or an application error.  Either way it is not an ITS issue.  You should see if the same error appears when using this transaction on the SAPgui for Windows.  If so you should debug from an application point of view.
    Edgar

  • System error: NO posted data for 8_CPR_EXTID 8 (Include LCATS_ITSF10)

    Hi Exters
    I am getting error like this System error: NO posted data for 8_CPR_EXTID 8 (Include LCATS_ITSF10) .Can anyone help me.
    Thanks & Regards
    Sandya

    Hi !
    I have the same error "System error: NO posted data for 4_CPR_OBJGEXTID 4 (Include LCATS_ITSF10)".
    How did you solve it?
    Thank you in advance!
    Vana Sounta

  • Generate Posting Date for Payroll Periods"

    Hi all,
    What is the relevance of "Generate Posting Date for Payroll Periods" ?
    table T549S
    Rx

    Posting Date is required after payroll run and exited then we have to post payroll results to accounts.After payroll run which date we have to post to accounts. Source is 01 payday...target 04 posting date....for ex If payday is 30th every month.....then posting date is after X days .....like you have to generate postinfg dates.
    Mohan

  • Posting Date for Rebate Agreement (extended)

    Hi ,
    When doing settlement for the extended rebate, is it possible to input manually the posting date of the CM?
    Currently, it gets the valid to date of the agreement.  What if the settlement is done 2-3months after the validity period of the agreement, we would like to have the posting date as the current date and not a past date.
    Thanks,

    Hi Praveen,
    You are correct.  The final settlement credit memo request uses the last day of the agreement validity period as the billing date.
    Please refer to the 29th Page  first and second lines of the Matthias white paper of Rebate management. Below is the link.
    http://www.erpgenie.com/publications/saptips/052005.pdf
    Hope this helps

  • Posting date for rebate credit note document

    Hi friends,
    This is with reference to settlement of rebate agreement. There is a background job executed say today, but the posting date was backdated to 31/08/2011. The financial posting period for current month starts from 27th of Aug and the posting was done in current period only. The validity of the Rebate agreement ends on 31/08/2011.
    My query is what is the reason behind the system posted the document on 31/08/2011.
    Is it because the validity ends on 31/08/2011.
    Quick responses are appreciated.
    Thanks & regards,
    Praveen.

    Hi Praveen,
    You are correct.  The final settlement credit memo request uses the last day of the agreement validity period as the billing date.
    Please refer to the 29th Page  first and second lines of the Matthias white paper of Rebate management. Below is the link.
    http://www.erpgenie.com/publications/saptips/052005.pdf
    Hope this helps

  • Stck on posting date for vendor.

    can i have the Transaction code to check stock on posting date of vendor stock
    (i..e vendor stock on specific date )
    MBLB is the transaction code to check vendor stock.
    mb5b special stock

    Hi,
    I would suggest that you request a simple ABAP for this.
    It is not as difficult to write as it would appear.
    You know the current stock and you can get a list of the material documents that have updated that stock and so the program just needs to subtract the movements between now and the date that you want, to give you your report.
    MB5B is the nearest standard report and this doesn't have vendor on the selection screen and so you will have to write something.
    Steve B

  • 2lis_02_scl extract records with wrong posting date for Good Receipts.

    Hi Experts,
    We are currently having issue of mismatch between BW Schedule Line data with R/3 values for the Goods Receipts posting date updating incorrectly in to BW.
    Example.
    In table EKBE purchase order history we have following records.
    MANDT EBELN        EBELP   ZEKKN VGABE GJAHR BELNR      BUZEI BEWTP BWART BUDAT      MENGE
    501   5600453404   00010   00    1     2010  5012473031 0001  E     101   23.01.2010        1.250,000
    501   5600453404   00010   00    1     2010  5012473031 0002  E     101   23.01.2010        1.250,000
    501   5600453404   00010   00    1     2010  5012473031 0003  E     101   23.01.2010        1.250,000
    501   5600453404   00010   00    1     2010  5012693310 0001  E     101   26.02.2010        1.250,000
    Which means we have on posting date of 23.01.2010 1250*3 i.e. 3750 quantity of Goods Receipts.
    However when we check the extractor we get multiple records in internal table C_T_DATA and in psa.
    Line BWV ETENR   SLFDT              MENGE    ROCA BEDAT                            BUDAT          EBELN
           ORG                                                        NCEL
    1     001     0001     20100125     3750.000          20100113     ZNB     F     00000000     5600453404
    2     001     0002     20100226     1250.000          20100113     ZNB     F     00000000     5600453404
    3     002     0001     20100125     3750.000     X     20100113     ZNB     F     20100123     5600453404
    4     002     0001     20100125     3750.000          20100113     ZNB     F     20100123     5600453404
    5     003     0001     20100125     3750.000     X     20100113     ZNB     F     20100127     5600453404
    6     003     0001     20100125     3750.000          20100113     ZNB     F     20100127     5600453404
    7     002     0001     20100125     3750.000     X     20100113     ZNB     F     20100226     5600453404
    8     002     0001     20100125     3750.000          20100113     ZNB     F     20100226     5600453404
    9     002     0002     20100226     1250.000     X     20100113     ZNB     F     20100226     5600453404
    As can be seen we have record no 8 for ETENR (Schedule line 1) with posting date 26.02.2010 and another record with posting date 23.01.2010.
    Since we are getting 2 records the record with incorrect posting date overwrites the record with correct one.
    Any idea if this could be a standard extractor problem or any other way to resolve this issue.
    Any help would be appreciated.

    First of all, are you using a staging DSO? (You should ideally)
    If yes, is it a Write Optimized DSO? (Again, this is ideal)
    If its a standard DSO, the values maybe over-writing upon activation.
    You have 3 records (quantity = 1250 * 3) that have been receipted on 23.01.2010, where Posting Date = 23.01.2010.
    You also have a record (quantity = 1250 * 1) that has been receipted on 26.01.2010. Posting date = 26.01.2010.
    Now, in RSA3 & in PSA you can see more records than intended.
    This is because you have before & after images. (ROCANCEL = X or blank).
    ROCANCEL = X --> Before Image (record before change)
    ROCANCEL = blank --> After Image (record after change)
    This is a standard property of the extractor.
    Now, we also have something known as BWVORG (Process Keys). Each process, i.e. creating a PO, Goods Receipt, Invoice etc.. have different Process Keys.
    Creation - 001
    Goods Rcpt. - 002
    Invoice - 003
    We can see that record 8, i.e. BWVORG = 002 (GR) has been modified on 26.01.2010.
    That is why there is before image and after image.
    Which one should be the correct posting date? 23.01.2010?
    Normally in a Write optimized DSO, you will have all the records (before and after images & others as well).
    I hope this helps.
    Please let me know if otherwise.

  • Posting date for MB52 and MB58 transactions

    Hi,
    I want to add posting date on the selection screen of standard transaction MB52 and MB58 for selecting the stocks within the posting period. I want the table name and the field name for the posting date.
    Helpful answers will be rewarded.
    Thanks and regards,
    Kiran kumar K

    rgsdf

  • Posting date for MB52 and MB58

    Hi,
      I want to add posting date on the selection screen of standard transaction MB52 and MB58 for selecting the stocks within the posting period. I want the table name and the field name for the posting date.
                     <b>Helpful answers will be rewarded.</b>                      
      Thanks and regards,
        Kiran kumar K

    Hi Kiran,
    Both  MB52 and MB58 are transactions which give the stock at that moment i.e. stock at the time transaction is run.
    If you add posting date to these transactions then complete logic of picking and displaying the stocks will have to be changed.
    Instead you may use some other standard MM reports available in LIS for this purpose. For example you can use MCBA / MC.9 for stock as on particular date or a range of date.
    Let us know the exact requirement so that some other standard reports can be suggested.
    Regards,
    Vishal

Maybe you are looking for

  • Can't get File.copy(target) to work.

    Hi, I'm writing a script where I want to copy a file to another location after the render has finished, but I can't get the File.copy() method to work. Here's a snippet of the code: app.project.renderQueue.render(); var renderedFile = app.project.ren

  • ANY UPDATE ON PDF READER FOR CURVE 2 AND MORE ON BB PROTECT

    Please, I need an update if free pdf reader is now available for curve 2, OS V5. Please, how strong is Blackberry protect application on device installed  when intruders try to wide/format device and can I still have access to the device if number is

  • Save Task with Different name in workspace

    Hi, While using SAVE button in workspace, is there a way to save tasks with different names? steps:       1) Click on start Process in workspace  - Complete task order        2) Click on save button with some data.                   - Is it possible

  • Secure SIP lines are not supported on the CME

    Hi,  I was looking for the configuration of Secure SIP lines on the CME and found in the link bellow that "Secure SIP lines are not supported on the Cisco Unified CME mode", only Secure SCCP lines is supported: http://www.cisco.com/c/en/us/td/docs/vo

  • Crosstab Profit Margin Calculation

    I have a crosstab with SalesRep as rows and Product as Columns. I have SumSales and SumCost in the intersecting cells. How do I subtract SumCost from SumSales and display this result (SumProfit) in each cell? Is there a way to calculate the profit ma