Posting date in AFRU and 2lis_04_p_arbpl data source is not matching

Hi Experts,
We are facing an issue with 2LIS_04_P_ARBPL data source, posting date in AFRU table and in data source is not matching.
For example: we booked an activity confirmation of value 100 on 01.01.2015 posting date, Counter 1, Operation 10
For the same operation another counter is confirmed on 01.02.2015 posting date.
So, in AFRU table:
Prod Order     Operation     Confirmation Number     Counter     PostingDate     Activity
1001               10               8001                             1              01.01.2015       100
1001               10               8001                             2              01.02.2015       0
In 2lis_04_p_arbpl data source, counter field is missing due to which only 1 record is coming which is:
Prod Order     Operation     Confirmation Number     Counter     PostingDate     Activity
1001               10               8001                             1              01.02.2015       100
In data source, activity of value 100 is coming on 01.02.2015 date instead in AFRU table it is booked on 01.01.2015 posting date by which we are unable to match the value in query which is based on posting date.
Please help on this.
Thanks,
Sameer

Hi Sameer,
Please check on which date the production order has status as "completed".
It could be on 01.02.2015.
Thanks,
Vimal

Similar Messages

Hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been not help.

hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been no help.

- Try restoring on another computer.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Lightroom v. 3.6 and Sony A99 RAW does not match

I recently bought the newest Sony A99 camera, but it seems L.v. 3.6 does not manage this (aparently new) type of RAW-pictures.
Do I have to buy the L.v.4 or can I use v. 3.6 with changing some settings?
Thank you

Hello mJim,
It works. Thank you for your help.
Eugene
2013/3/30 jim01403 <[email protected]>
Re: Lightroom v. 3.6 and Sony A99 RAW does not match created by
jim01403 <http://forums.adobe.com/people/jim01403> in *Photoshop Lightroom
- View the full discussion<http://forums.adobe.com/message/5192043#5192043

The java and sql object type was not matched

My table(Oracle10.2) has a varying arrays column. For mapping to java classes, I use JDeveloper(10.1.3.1.0) to generate java classes. Then I try to insert a record into this varrying arrays column with java. While it always complaints java.sql.SQLException.the java and sql object type was not matched. I can not find the reason.
My java code:
               StructDescriptor structdesc = StructDescriptor.createDescriptor(
                         "VARRAY_SEQ", con);
               int nid=20;
               int pid=546;
               BigDecimal mynid=new BigDecimal(nid);
               mynid=mynid.setScale(0, BigDecimal.ROUND_HALF_UP);
               BigDecimal mypid=new BigDecimal(pid);
               mypid=mypid.setScale(0, BigDecimal.ROUND_HALF_UP);
               Object[] attributes = { "ASDF", mynid, "Developer", mypid,
                         "rwretw" };
               STRUCT Rel = new STRUCT(structdesc, con, attributes);
               stmt.setObject(8, Rel);
               stmt.execute();
               stmt.close();
And the STRUCT is
public RelSeq(String nucl, java.math.BigDecimal neId, String nuor, java.math.BigDecimal pId, String phor) throws SQLException
{ _init_struct(true);
setNucl(nucl);
setNeId(neId);
setNuor(nuor);
setPId(pId);
setPhor(phor);
}

My table(Oracle10.2) has a varying arrays column. For mapping to java classes, I use JDeveloper(10.1.3.1.0) to generate java classes. Then I try to insert a record into this varrying arrays column with java. While it always complaints java.sql.SQLException.the java and sql object type was not matched. I can not find the reason.
My java code:
               StructDescriptor structdesc = StructDescriptor.createDescriptor(
                         "VARRAY_SEQ", con);
               int nid=20;
               int pid=546;
               BigDecimal mynid=new BigDecimal(nid);
               mynid=mynid.setScale(0, BigDecimal.ROUND_HALF_UP);
               BigDecimal mypid=new BigDecimal(pid);
               mypid=mypid.setScale(0, BigDecimal.ROUND_HALF_UP);
               Object[] attributes = { "ASDF", mynid, "Developer", mypid,
                         "rwretw" };
               STRUCT Rel = new STRUCT(structdesc, con, attributes);
               stmt.setObject(8, Rel);
               stmt.execute();
               stmt.close();
And the STRUCT is
public RelSeq(String nucl, java.math.BigDecimal neId, String nuor, java.math.BigDecimal pId, String phor) throws SQLException
{ _init_struct(true);
setNucl(nucl);
setNeId(neId);
setNuor(nuor);
setPId(pId);
setPhor(phor);
}

Entourage: "Event and computer time zones do not match."

Since installing the latest update to the Mac OS (10.4.6) I have a glitch with Entourage (Office 2004 for Mac v. 11.2.3) and I believe it has something to do with the Mac OS. See below for explanation:
When adding a new calendar event to the calendar, I get an error which reads:
"Event and computer time zones do not match. In Calendar views, the event time is adjusted to display correctly." This is not true. I've checked the time zones in both my OS and Entourage and that is not the problem.
It must have to do with how it interacts with the latest update of the Mac OS. I had not updated software on my laptop for a while, and it did not exhibit this error, so as a test, I downloaded and installed the latest version of Office and tested Entourage: no error message. To be sure, I restarted the computer and tried again: no error. Then I downloaded and installed all of the latest updates to the Mac OS using Software Update: I got the error. So, I think the problem is the interaction between the latest update of Office 2004 for Mac and the latest Mac OS or maybe even just something in the Mac OS.
There are plenty of people complaining about this on the newsgroups at Mactopia. I'm not sure who needs to repair this problem - Apple or Microsoft, but does anyone know if there will be a patch issued by Microsoft to fix the problem? Or maybe my assessment is wrong and you have another solution?
Thanks very much for your help with this problem.
Dual G5 2.0 and Powerbook titanium Mac OS X (10.4.6)

I am in Ohio (eastern time) and I am also having this problem. It is not annoying but my problem is I am not able to schedule any meeting on Entourage. (It will not show if the person I am inviting is busy or not). They use the Exchange server in my company, and I read on the microsoft site that public folders and hence the calendar items are not synced. But seems like this page is for Office X and not 2004. Any clues? Is the time error related to me not able to schedule meetings? I am using latest 10.4 and Entourage 2004.
http://www.microsoft.com/mac/resources/resources.aspx?pid=resourcekits&rk=office x&article=/mac/officex/ork/KnownIssuesEntourage.xml
MacBook Pro, iMac G4 Mac OS X (10.4.7) 2 GHz, 2G RAM

Please help! -5002,Base document card and target document card do not match

Hi
When I try to save an invoice with a payment thro' the DI API I get the following error :
<b>-5002,Base document card and target document card do not match</b>
Why am I getting this error and how can I solce it?
Thanks

Hi,
For the sake of anyone else who has this problem:
After much searching for the answer to why I was getting this message I found that the internal validation must be case sensitive and so 'C00417' on the receipt was not matching 'c00417' on the invoice.

Base document card and target document card do not match

I ran into this error "Base document card and target document card do not match" while uploading Outgoing Payments too AP Invoices.
The CardCode of the Invoice matches the CardCode of the Payment so it's not that issue. I can't seem to fix this error.
Any input would be helpful.
Here's screenshots too
OVPM - Payments
VPM1 - Payments_Checks
VPM2 - Payments_Invoices

Hi,
For the sake of anyone else who has this problem:
After much searching for the answer to why I was getting this message I found that the internal validation must be case sensitive and so 'C00417' on the receipt was not matching 'c00417' on the invoice.

Ie 11 fails with 'IE Security detected that the URL and the configuration link to not match

HI,
I Have a user that is using IE 11 and is getting the following error:
IE Security detected that the URL and the configuration link to not match. Please use the URL as configured. Is and IP based URL. On IE 10 we get a similar message, but as soon as we add it to our trusted site and switch to compatibility
mode the issue goes away.
For example http://10.10.10.180/xxx/iafwebsite_810/
What would be causing this issue?
Any help would be appreciated.
Thanks,
Trish
Trish Leppa

Hi,
It seems that this URL doesn't meet security level. Thus, as long as you add this URL to Trusted sites zone, this issue is fixed.
Thanks!
Andy Altmann
TechNet Community Support

Entourage- Event And Computer time zones do not match. Please Help

Event and computer time zones do not match. In calendar views,the event time is adjusted to display correctly.
Whenever I set up a appointment I put it in at one time and it show up as another.
PleaseHelp

I am in Ohio (eastern time) and I am also having this problem. It is not annoying but my problem is I am not able to schedule any meeting on Entourage. (It will not show if the person I am inviting is busy or not). They use the Exchange server in my company, and I read on the microsoft site that public folders and hence the calendar items are not synced. But seems like this page is for Office X and not 2004. Any clues? Is the time error related to me not able to schedule meetings? I am using latest 10.4 and Entourage 2004.
http://www.microsoft.com/mac/resources/resources.aspx?pid=resourcekits&rk=office x&article=/mac/officex/ork/KnownIssuesEntourage.xml
MacBook Pro, iMac G4 Mac OS X (10.4.7) 2 GHz, 2G RAM

IDOC error 639 IDoc & and determined transport type & do not match

Hello,
can you help me with this issue?
An idoc is stuck beacuase of this error:
IDoc & and determined transport type & do not match
Message no. IHC_IDOC639
What does it mean? how can I fix thiss issue in order to re-process the idoc?
Thank You

Hi,
is SAPNET note 784881 implemented? If no, implement it and try again.
BR Christian

Do not get any data from 0CA_IS_TS_1 and 0CA_IS_TS_2 data source

Hi all,
We are trying to populate cubes(0CATS_C01) and (0CATS_C02) for which data sources are 0CA_IS_TS_1 and 0CA_IS_TS_2 respectively. We activated business content for these data sources. When we run these data sources in RSA3 we do not get any data even though we have data in the repective tables. We applied SAP Note :1586467, which says (Note 1586467 - Extractor 0CA_TS_IS_1 returns no data), Can you please help me out in knowing if we are missing some thing?
Thank you,
Bob.

Hi,
To use this DataSource you must have implemented Support Package SAPKH46C32, or have made the relevant corrections in SAP Note 509592.
Pl check you have required data as mentioned below
When transferring time sheet data to the Business Information Warehouse (BW), you must note the connection between the following data sources:
· CA_TS_IS_1 (Time Sheet Data (Approved))
Documents are written in the SAP R/3 system for Time Sheets with status 30 (approved). The documents log the changes that have been made to data records.
Therefore, the SAP R/3 system can perform a delta update for this data source. The system only transfers newly approved data records and changes that have been made to existing data records. At the same time, the SAP R/3 system notes the date of the last delta transfer.
· CA_TS_IS_2 (Time Sheet Data (Released for approval))
The SAP R/3 system does not write documents for Time Sheet data with status 20 (released for approval). This means that changes made to these data records are not logged.
Therefore, the SAP R/3 system always performs a complete transfer of data records that have been released for approval. The number of data records that need to be transferred usually remains constant because in the period between two transfers not only new data records are added but other data records are also approved. Therefore, system performance is not restricted.
Thanks and regards

Copy data customer PO and PO date field from quotation to sales order

Hi Friends,
Can you please let me know what copy control settings I need to maintain in order to copy customer PO# and PO date field data in quotation to sales order.
All the data is getting copied from quotation to sales order when I create sales order with reference to quotation but the customer PO no. and PO date is not getting copied.
Can anyone please help.
Regards,
Wasim.

HI
Not sure if this is possible via Customization or not but you can try the user-exits or Routines for the Sales Order program for this
You need to change the include FV45C102 (assuming you have copied standard order and the copy controls). ABAP team should be able to make changes to this routine and achieve your requirement.
In VTAA, after choosing the Source and Target order type and choosing the right Quatation item, check the routine for 'Bus.data/item compl.' and it will be what has been mentioned above.
Please check &Revert
Thanks&Regards
Raghu.k

The data type of "output column "Cookies" (7371)" does not match the data type "System.Int32" of the source column "Cookies"

I have the following data flow:
ADO Source
Input Column: Cookies ID: 7371      Datatype: DT_NUMERIC
Output Column: Cookies     ID: 7391      Datatype: DT_NUMERIC
DATA CONVERSION TASK
Input Column: Cookies       ID: 1311     Datatype: DT_NUMERIC
Output Column: Copy of Cookies   ID: 1444    Datatype: DT_I4
SQL Server Destination
Input Column: Copy of Cookies    ID: 8733    Datatype: DT_I4
Output Column: Cookies       ID: 8323     Datatype: DT_I4
This looks fine to me. Why am I getting the error?
This is SQL Server 2008 and I am working at this point only in BIDS, so it is not a question of dev vs prod server or anything. One environment, running in BIDS. Other similar data flows seems to be working ok. It seems the error is referring to a datatype
mismatch in the source--but how can that be?
Thanks!

Actually, I am wrong in that Visakh. I think you are correct.
There are two versions of all tables, one with 15 minute rollups and one with daily rollups. Otherwise the tables are the same--same exact fields. I use a loop with a data flow inside to get data from one version of the rollup and then the other.
The problem is, for some of the fields with larger values the datatype is NUMERIC instead of INTEGER. (This is Cache database). SO:
dailyCookies:   Field: CountOne   Datatype: NUMERIC
15minCookies:   Field: CountOne   Datatype: INTEGER
A variable dynamically creates the query so it appends "daily" or "15min" to the beginning of the tables. So on the first loop it does the 15min tables and on the second the daily tables. When I created this particular table I have to plug a default query
in so I used the daily. It picked up the datatype as NUMERIC so when I run the package it loops through 15min first and sees the datatype is INTEGER.
How to deal with this? I suppose I could convert the datatype in the source query, but that would be a hassle to do that for some fields and not others. This tables has hundreds of fields, BTW. Can one source object deal with a change of datatypes? SSIS
is so picky on datatypes compared to other tools....
Thanks,

URL Data Control: Connection to the URL source could not be created

Using JDev Studio 10.1.3.2
Trying to use a new URL data control pointing to a csv file.
I have successfully create a new URL data control using the New Gallery->Web Services->URL Services Data Control. I have successfully tested the connection and I am able to see the Data control in the DC Palette. The attributes shown are correct.
However, when I create a test client displaying the new CSV Data Control attributes in a table and try to run it, I get the following error:
"Apr 21, 2008 3:40:46 PM oracle.adfinternal.model.adapter.url.csv.CSVDataControl invokeOperation
WARNING: Exception invoking method from CSV data control. Cause: javax.naming.NameNotFoundException; remaining name 'URLConnection1'
Apr 21, 2008 3:40:46 PM oracle.adfinternal.model.adapter.url.csv.CSVDataControl invokeOperation
WARNING: Exception invoking method from CSV data control. Cause: javax.naming.NameNotFoundException; remaining name 'URLConnection1'
Exception in thread "main" oracle.adf.model.adapter.AdapterException: DCA-50006: The URL data control call failed. A connection to the URL source could not be created.
The data controls configuration file is shown below:
<?xml version="1.0" encoding="UTF-8" ?>
<DataControlConfigs xmlns="http://xmlns.oracle.com/adfm/configuration"
version="10.1.3.40.66" Package="com.xp.model"
id="DataControls">
<AdapterDataControl id="URLDataControl1"
FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl"
ImplDef="oracle.adfinternal.model.adapter.url.csv.CSVDCDef"
SupportsTransactions="false" SupportsSortCollection="true"
SupportsResetState="false" SupportsRangesize="false"
SupportsFindMode="false" SupportsUpdates="false"
Definition="URLDataControl1" BeanClass="URLDataControl1"
xmlns="http://xmlns.oracle.com/adfm/datacontrol">
<Source>
<Definition xmlns="http://xmlns.oracle.com/adfm/adapter/url/csv"
ConnectionName="URLConnection1"
Source="http://phusca-w20909:8080/client_war/WRK_COMPUTERS.csv" Delimiter=","
QuoteChar="{none}" IsFirstRowNames="true" Encoding="UTF-8"/>
</Source>
</AdapterDataControl>
</DataControlConfigs>

Using JDev Studio 10.1.3.2
Trying to use a new URL data control pointing to a csv file.
I have successfully create a new URL data control using the New Gallery->Web Services->URL Services Data Control. I have successfully tested the connection and I am able to see the Data control in the DC Palette. The attributes shown are correct.
However, when I create a test client displaying the new CSV Data Control attributes in a table and try to run it, I get the following error:
"Apr 21, 2008 3:40:46 PM oracle.adfinternal.model.adapter.url.csv.CSVDataControl invokeOperation
WARNING: Exception invoking method from CSV data control. Cause: javax.naming.NameNotFoundException; remaining name 'URLConnection1'
Apr 21, 2008 3:40:46 PM oracle.adfinternal.model.adapter.url.csv.CSVDataControl invokeOperation
WARNING: Exception invoking method from CSV data control. Cause: javax.naming.NameNotFoundException; remaining name 'URLConnection1'
Exception in thread "main" oracle.adf.model.adapter.AdapterException: DCA-50006: The URL data control call failed. A connection to the URL source could not be created.
The data controls configuration file is shown below:
<?xml version="1.0" encoding="UTF-8" ?>
<DataControlConfigs xmlns="http://xmlns.oracle.com/adfm/configuration"
version="10.1.3.40.66" Package="com.xp.model"
id="DataControls">
<AdapterDataControl id="URLDataControl1"
FactoryClass="oracle.adf.model.adapter.DataControlFactoryImpl"
ImplDef="oracle.adfinternal.model.adapter.url.csv.CSVDCDef"
SupportsTransactions="false" SupportsSortCollection="true"
SupportsResetState="false" SupportsRangesize="false"
SupportsFindMode="false" SupportsUpdates="false"
Definition="URLDataControl1" BeanClass="URLDataControl1"
xmlns="http://xmlns.oracle.com/adfm/datacontrol">
<Source>
<Definition xmlns="http://xmlns.oracle.com/adfm/adapter/url/csv"
ConnectionName="URLConnection1"
Source="http://phusca-w20909:8080/client_war/WRK_COMPUTERS.csv" Delimiter=","
QuoteChar="{none}" IsFirstRowNames="true" Encoding="UTF-8"/>
</Source>
</AdapterDataControl>
</DataControlConfigs>

Refresh buffer when rfc gets data from crm and the data was updated from R3

hi all
I have a program in r3 for maintenance of partners, so the user can create or update a CRM partner from the R3 system. if you are updating a partner, the program gets the data from CRM via RFC and saves the changes via zBDoc. if the user modify a partner and then try to check if the info were updated, he needs to leave the transaccion and run it again in order to the RFC gets the data updated. how I can avoid to leave the transaccion? i tried with a buffer refresh and commit but it doesn't works.... any idea?
tnks

Hi Alan,
THANK YOU for that hint. That brought me a giant step further, seriously! Many thanks! Now my report is running and hourly creating an instance, reeally nice!
But of course, the next problem is arising rapidly: Now that I got my report creating instances, the funny thing happening is the following: I created the WebI report with the WebI-Rich Client and then saved it to the server. In InfoView I scheduled the instance creation and the strange thing is now: The values differ. In the original report the values for some percentage ratios (e.g. 50%) show up as they should with four decimals: 0,5000 (German way of displaying numbers with decimals). BUT: In the instances of the same report, exactly these numbers would appear as 0,0000. So the numbers would just not be displayed! But all other numbers (all numbers not having decimals) would show up as they are supposed to even in the instances of the report.
This is kind of strange to me. Does anybody have a clue what the problem might be?
Many thanks again! And I hope I am not bothering you guys with these "newbie" questions.
Thanks and best regards,
Kai

Posting date in AFRU and 2lis_04_p_arbpl data source is not matching

Similar Messages

Maybe you are looking for