Posting date later than system date

There are certain times that I would like to enter an AP invoice into a future date. SAP does not allow. Is there an override to this that would allow to enter invoice to a future date??
I would like the ability to be able to post an Expense Item (AP Invoice) to a future period, and then subsequently cut a check, ex. On 9/28/08 with a date of 10/1/08.

Hi Expert,
I am currently using B1B PL34 and confirmed that I set "Allow Future Posting Date" in Document settings as well as in Authorizations.  However, I still cannot create an Aug'08 invoice even I setup my current period as Jul'08 as at today (20/10/2008). 
Can anyone advise which patches has already solve this issues?
Thank you and regards,
Joan.

Similar Messages

  • Bill Date not later than PGI date

    D/ Friends,
    Suppose PGI date is 3.6.2010 & user is creating bill doc on 5.6.2010 but entering a date later than PGI date say e.g 2.6.2010. Now we want that sys shd not accept a manually entered bill doc date later than PGI date. I think, Iu2019ve made my issue very clear. So how to achieve this thru std. config? We know that thru ABAP a u201CZu201D chck is possible to apply for this scenario but we want to do it thru std. config. Pls help.
    Thanks.

    Go to VTFL, select the item category for the combination of your delivery type and billing type and maintain routine 011 for the field "Data: VBRK/VBRP".  If you have already assigned a different routine, then add this code
    VBRK-FKDAT = SY-DATUM"
    Also the above routine will only propose the system date but it can be changed manually.  In order to prevent this, you can make the date field as grey through billing exit USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC).  By doing so, system will always system date (if you applied routine 11) or the actual GI date which cannot be changed.
    thanks
    G. Lakshmipathi

  • Posting not possible (Value date earlier than capitalization date)

    Hello , we are getting the error shown below. I'am not sure where to go to fix this can any offer any advice.
    Thank you
    Posting not possible (Value date earlier than capitalization date)
    Message no. AA 322
    Diagnosis
    Asset 000000040048 0000 was first capitalized on 20080831.
    You cannot post to an asset that was not yet capitalized.
    Procedure
    You have the following options:
    Change the asset value date of your posting.
    Capitalize the asset by posting an acquisition.

    Generally this message will come , if you have created a asset  with a capitalization date say   31/08/2008 and you are settling a Internal order for last period say 07 on with a posting date earlier than capitalization date , say 15/08/2008.
    The System will not allow you to post because the value date cannot be earlier than capitalization date.
    Change the value date to later than capitalization date and post.

  • Date in External Content Type 1 hour later than MSSQL date

    I have an MSSQL table with a date column. I have created an external content type which pulls data from from this MSSQL table. But when the content type is shown in a list in Sharepoint 2010 site, the date is 1 hour later than the date from the MSSQL table?
    This is my MSSQL dates:
    This is my SP 2010 dates:

    I'm going to guess that this has to do with server time and sharepoint time. SharePoint time can be found under regional settings. Check to see that it's consistent with the time zone of your other server.
    Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

  • ESS Bank Information errors if end date is less than system date

    Hi to all,
    We have create an WD Java aplication to create new entries in infotype 0023. We have used a standar component DC (PersInfo).
    The first problem - we couldn't create new entries if start date is less than system date and we used:
    In transaction SPRO got to Personnel Management>Employee Self Service>Service Specific Setting-->Change Default Start Date
    Business Add-In HRXSS_PER_BEGDA. You can set the date in the DEFAULT_DATE method.
    Parameters of the method DEFAULT_DATE:
    MOLGA (Importing)
    PERNR (Importing)
    INFTY (Importing)
    SUBTY (Importing, optional)
    BEGDA (Changing)
    We have solved the first problem with begda.
    The second problem - we couldn't create new entries if end date is less than system date.
    Can anybody helps me about this second problem?
    Thank a lot.

    Can anybody helps me?
    Thank a lot.

  • ESS Information errors if end date is less than system date

    Hi to all,
    I have create an WD Java aplication to create new entries in infotype 0023.
    First problem: At the beginning I couldn't create new entries if start date is less than system date. To solve this problem I used:
    The transaction SPRO to go to Personnel Management>Employee Self Service>Service Specific Setting-->Change Default Start Date
    In HRXSS_PER_BEGDA I changed BEGDA to 01.01.1900 in the DEFAULT_DATE method and i solved the first problem.
    Now I need solved the second problem - we couldn't create new entries if end date is less than system date.
    In this method DEFAULT_DATE I can't change ENDDA because ENDDA isn't a parameter in this method.
    MOLGA (Importing)
    PERNR (Importing)
    INFTY (Importing)
    SUBTY (Importing, optional)
    BEGDA (Changing)
    Can anybody helps me about this second problem?
    Thank a lot for your help.

    I am creating an aplication WD Java:
    - This application uses a R3 Function Module HRXSS_PER_MODIFY_PNNNN
    - This FM uses the method CALL METHOD xss_adapter->modify
    - This Method uses IF_HRPA_PERNR_INFTY_XSS~MODIFY
    - This method uses:
      IF buffer_entry-container->a_pskey-endda < user_today.
        msg-msgid = 'PG'.
        msg-msgty = 'E'.
        msg-msgno = '016'.
        msg-msgv1 = 'Data valid only for past is not'(009).
        msg-msgv2 = 'allowed;'(010).
        msg-msgv3 = 'correct'(011).
        msg-msgv4 = 'end date to a date today or future date.'(012).
        CALL METHOD message_list->if_hrpa_message_handler~add_message
          EXPORTING
            message = msg
            cause   = xss_adapter_generic.
      ENDIF.
    How can I change the value user_today?
    This value is a parameter for the method GET_INSTANCE in CL_HRPA_PERNR_INFTY_XSS, but I don't know when this method is called.
    Can you help me?

  • Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed

    SharePoint 2010 -
    I have created a console utility that further calls the stsadm.exe to Export sites from one site collection in a DB to another site collection in another DB of the same web application.
    Export works fine. But during Import, I get the following errors
    [ListItem] [Admin] Progress: Importing
    [ListItem] [Admin]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [Hol plans.xls] Progress: Importing
    [ListItem] [Hol plans.xls]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [Time.doc] Progress: Importing
    [ListItem] [Time.doc]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [AP Docs] Progress: Importing
    [ListItem] [AP Docs]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [Update - June 27th.pdf] Progress: Importing
    [ListItem] [Update - June 27th.pdf]   Verbose: List URL: /pwa1/GTR/7 GTR  Programme
    [ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
    [ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
    [ListItem] [Update - June 27th.pdf]   Error: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
    FatalError: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
    Progress: Import did not complete.
    1. Does the console application treated as a Sandbox Solution?
    2. Do I need to configure CAS policy in wss_usercode.config? and what?
    3. What else could be configured to make this work?
    I have tried adding the following in wss_custom_minimaltrust.config but no avail.
    <SecurityClass Name="SqlClientPermission" Description="System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>           
    and
    <PermissionSet
                        class="NamedPermissionSet"
                        version="1"
                        Name="SPRestricted">
    <IPermission
                          class="SqlClientPermission"
                          version="1"
                          Unrestricted="true"
                                />   
    <!-- Other IPermission -->
    </PermissionSet>
    UPDATE: It has been observed that the issue is intermittent. That is, sometimes the import works fine (event without any configuration of SqlClientPermission in any config file) but sometimes it gives the above error. I'm stuck!
    Regards, Amit Gupta

    Hi,
    According to your post, my understanding is that you get Error “Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed
    Simple solution is to change the trust the trust level to FULL: <trust   level="[Full]"    originUrl="URL" />
    In addition, you can modify the wss_mediumtrust.config and wss_minimaltrust.config file under the path “C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG”.
    For more information, you can refer to:
    http://blogs.msdn.com/b/navdeepm/archive/2010/02/19/system-security-securityexception-request-for-the-permission-of-type-system-data-sqlclient-sqlclientpermission-system-data-version-2-0-0-0-culture-neutral-publickeytoken-b77a5c561934e089-failed.aspx
    http://www.fewlines4biju.com/2011/01/request-for-permission-of-type_18.html
    http://techsolutions-at-desk.blogspot.com/2011/08/request-for-permission-of-type.html
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • Error In Backdated Reservation Creation  Base date earlier than current dat

    Dear Experts,
    Error while creating Reservation for back date.
    Base date earlier than Current date.
    Can we create backdated reservation ? and post goods issue to the same ?
    if it need configuration please explain the steps for allowing creation of backdated reservations.
    Thanks in Advance

    What is the error message nos.?

  • Can i upload  first  Transaction data rather than master data what will hap

    hai,
    can i upload  first  Transaction data rather than master data what happends going in bw regarding performance issues like indexes
    let me know
    regards,
    murali

    Hi Murali,
    you can load the transaction data before master data. The main impact will be, that the system has to generate sid's and has to populate the sid-table of the master data objects while loading the data to a data target (cube or ods that is activated for bex reporting). This basically means that your data loads will take some more time. Additionally, if you need the master data attributes somewhere in your update or transfer rules, you will not get the correct information.
    So basically it is always a good approach to load and activate the master data before loading the transactional data. But anyway, specially in the development environment I usually don't load all the necessary master data.
    regards
    Siggi
    PS: navigational attributes of the data targets will not be available until you loaded the master data and scheduled the attribute and hierarchy change run.
    Message was edited by: Siegfried Szameitat

  • How can I set document date automatically as system date?

    I use FBV1, FBV2, F-02, FB02. Posting date is automatically set as system date. I want to set document date automatically as system date.
    How can I set document date automaticall as system date?
    Wbr.
    İlker Çokkeçeci
    Computer Engineer
    Ankara, Turkey

    Hi Expert,
    Please refer the below link..
    Document date to be defaulted as system date for all FI transactions
    as there mentioned, please go to T-Code: SHD0.
    Regards,
    GK
    SAP

  • Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.

    Hi Friends,
          Request for the permission of type System.Data.SqlClient.SqlClientPermission  System.Data  Version 1.0.5000.0  Culture neutral  .This error is recieving when ever i tried to use the sql connection (with Visual
    studio C#)  in sharepoint portal installed application.
    Please help me if any answers for the issue.

    Hi,
    Open wss_mediumtrust.config & wss_minimaltrust.config. SharePoint 2013(C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\).
    Find in wss_mediumtrust.config:
    <SecurityClass
     Name="SqlClientPermission"
     Description="System.Data.SqlClient.SqlClientPermis sion, System.Data,
     Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
    Copy and paste it in to the <SecurityClasses> node of wss_minimaltrust.config.
    In the PermissionSet section of this configuration file, add the following:
    Find in wss_mediumtrust.config:
    <IPermission class="SqlClientPermission" version="1" Unrestricted="true"/>
    Copy and paste it in to the a <PermissionSet> node of wss_minimaltrust.config.
    Here is a similar thread for your reference:
    https://social.msdn.microsoft.com/Forums/en-US/a1c8f2bf-2575-40b4-87f1-4f98462b3234/request-for-the-permission-of-type-systemdatasqlclientsqlclientpermission-systemdata-version?forum=tfssetup
    Best Regards
    Dennis Guo
    TechNet Community Support

  • When choosing date on a banking site a box appears telling me to use a to date greater than from date.

    I am trying to get a report from a bank site and a box pops up asking me to choose a to date greater than from date. I have the correct dates chosen. Is there a fix or away around this.

    Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
    *https://support.mozilla.com/kb/Secure+Connection+Failed

  • Can't get access in Time Machine to certain folders for any date earlier than current date/time.

    Can't get access in Time Machine to certain folders for any date earlier than current date/time, even when entering as Admin. Why do certain folders have small red "-" badge in lower right corner of folder icon?  Here's a picture of the dilemma:
    I've tried monkeying with priveleges using Command I, and changing users, but to no avail.  Can anyone help?

    Right.  Here's what the permissions look like from the Finder Command I:
    I'm not sure what "Custom" means, but when I then try to change it to "Read & Write", it doesn't take.... just comes back as Custom. Interesting to note that not only am I logged into Joan's account where the data folder and file lives) to do this, but when I do it from my own account  as Admin (dunc...mpster) I get the same result.

  • Can LSMW upload data other than Master Data

    Dear Friends,
    Can LSMW upload data other than Master Data, e.g. Want to upload the Vendor Invoice line items with single Debit and multiple Credit line items are there and also more than one GL a/c are involved.
    Thanks in advance.
    Regards,
    Mahendra Dev

    The answer is YES.
    There is no issue issue if you have different GL account.
    The issue is if you have multiple line item (which are differeing in each entry).
    For this, if you want to use LSMW, check for program, but not the recording method option.
    Regards,
    Ravi

  • ESS Bank Information errors if start date is less than system date

    Hello Developers,
    We are unable to create a new Bank Information record of type "Other"  from ESS Web Dynpro ECC 6.0 when we set the begda field to a date earlier than the system date.  When we attempt this we get the message: "Start date should be after <todays date> or later".
    Is there a configuration setting that will allow new records to be created with the begda set to a past date when creating new "Other" bank type records?
    Our payroll runs bi-weekly and we need to set the beginning date of a new record to the start date of the payroll cycle, which can be earlier than the creation date.
    Thank you

    Terry,
    In transaction SPRO got to Personnel Management>Employee Self Service>Service Specific Setting-->Change Default Start Date
    Business Add-In  HRXSS_PER_BEGDA. You can set the date in the DEFAULT_DATE method.
    Parameters of the method DEFAULT_DATE:
    MOLGA (Importing)
    PERNR (Importing)
    INFTY (Importing)
    SUBTY (Importing, optional)
    BEGDA (Changing)
    Regards
    Sarath

Maybe you are looking for