Posting date line items
Hello All,
Is there any way to findout in MM to check out on particular date which stock entries are posted into a which gl account.
Helpful answers will be rewarded.
Thanks,
Vibha
Thnks for the help Kiran,
Let me tel u what problem im facing.
When i m running mb5l tcode , valuation of stock on posting date amount is differing from amount which is made in balance sheet.
Now from fbl3n code im getting all the entries made in a particular gl account.
now i want to compare this amount with the amount of stock valuated when posting was made by mm guy.
So is there any way i can compare these two entries.
Thanks,
Vibha
Similar Messages
-
Transfer Posting for Line Items between Reconciliation Account
HI,
My customer want to transfer costing the line items between a old Reconciliation Account and a New Reconciliaton Account.
For example, i have a Account Group Vendor with a old Reconciliation Account " Vendor CEE".
This reconciliation account has the line items concern differents Vendors.
Edit a new Account Group calling ( CEE) to replace a Old Account Group.
After changing in Vendor Master data the Reconciliation account, we need to transfer posting the line items in the new account reconciliation
In Sap system is there a report can do it? Can you help me?
RegardsHi,
Thank you for the answer.
I did that, and exactly:
- In Trx Obbw insert the reconciliation account and Adjustement account.
- and execute the trx FAGLF101 in test but the sap system give me the following error:
" Account determination for transaction A00 is missing for account 0205016001 ZM P001 "
Message no. FR005
Can you help me?
Regards
Edited by: Marika De Cesare on Oct 18, 2011 1:06 PM -
How to reset already posted GL line item attributes
Hi Experts,
I have an issue with GL line items for Bank clearing account. At the time of conversion posted the line items in bank clearing account which are not open items and also not cleared items. Now I want to make it as open items in order to clear from this account.
Please share your experiences and thoughts.
Thanks in advance.
Regards
AdityaDear:
What i understood from your query is. You had a Bank Clearing account which formerly was not maintained on Open item basis. However you converted it to OIM management latter on. Now you have old entries standing in this account that belongs to period before OIM was turned on .. Am i right? If this is so then answer is you can only clear those entries on Open item basis in F-03 or in any other t code for open item processing which were posted on or after OIM was turned on. This is for your information.
Regards -
Unable to delete master data line items - Master data object CCHIUSRAM
Hello
We have an issue with the Master data Object CCHIUSRAM - CC Hier User Auth Maintenance. It has only master data and no texts no hierarchy. It is not time-dependent. It has /BIC/PCCHIUSRAM, /BIC/SCCHIUSRAM as database table only. This master data is not being used in any infoproviders.
In development client we are able to delete the line items of the Master data along with entering line items. RSRV check gives green for all checks.
In Test / Production client we are not able to delete the line items of the Master data. We are only able to enter master data lines and if we change any item then it creates another entry in the table.
Tried SE14 & RSDMD_DEL_MASTER_DATA - both does not help.
Did ST05 trace, could not find something concrete.
If any one has faced such an issue with any master data item then a response is much appreciated. It has become a bottleneck for us.
Many Thanks in advance
Pradip ParmarThanks for the response.
I can do this in EBD, but it is working fine in EBD. I cannot do this activity in EBP / EBT as the systems are closed and I cannot activate directly in EBT / EBP.
Besides, I have recently transported active versions of the object in EBT / EBP all again twice to see if it changes anything.
My guess is that, there is something stupid may be I am missing somewhere.
Any help is much appreciated.
Thanks -
Bapi for posting IR line item at a time
Hi....
Do we have a bapi for posting invoive receipt line item wise instead of posting the PO at a time......this wud be more precise for my requirement.....presently i'm using bapi_acc_document_post but this wud clear the document with single document number.....but i want it to be posted line item wise to see the amount individually item wise instead of combined one....similar to what we have in the IR which shows amount of individual items........This is an old bug that keeps popping up:
https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Vertical-scrolling-got-reset-everytime-I-use-Ultra-Nav-to-scroll/td-p/343477 -
Amount posted and Line item is Different in AW01n
Hi Asset accounting Experts
I have an issue Please need your Suggestion.
When one of our User is Using AW01N in that he found there is difference in Amount
When we see line item at bottom (Transactions) in AW01N
here it is showing one amount, when we double click on the amount, we can see accounting entry with different amount.
Pls see the below screenshot.
in the screen shot i have highlightned amount in Red ex here in our case it is 178952158.
when i double click this an accounting entry will display, in that amount posted would 175000000.
Please suggestHi Miktar,
Thanks for ur quick reply.
i should not share that screen shot.
but the accounting entry is as below
Document currency : usd
40 5007000 (BS GL account) xxxxxxxx
75 1210000( Recon account ac) xxxxxxxxx
Here Local Currency is LKR
But in asset master 72000005 under allocation, Evolution Grp INR(Currenecy) maintained.
transaction Type 120
Regards,
Babu -
Aggregates for master data & Line item Dimension
Hi i have question
1 Can we create Aggregate for Master Data?
2 Can we create Aggregate with Navigational Attributes?
3 Can we create Aggregate with Line Item Dimension?
4 How many dimension we can add with how many characteristics in it if we create a new Aggregate1 Can we create Aggregate for Master Data? - <b>No</b>
2 Can we create Aggregate with Navigational Attributes? - <b>No</b>
3 Can we create Aggregate with Line Item Dimension? - <b>No</b>
4 How many dimension we can add with how many characteristics in it if we create a new Aggregate - <b>You can create a maximum of 13 dimensions in the cube.You can add as many characteristics for an aggregate,adding many characteristics in the aggregate is as good as having the query fetch data from the Cube instead of the aggregates.</b>
Aggregates are subsets infocubes derived from the main InfoCube to increase the query performance.You can create as many aggregates you want in an InfoCube.
For each aggregate,internally dimensions are created based on the selected characteristics.
Take a look at this link for detail information...
http://help.sap.com/saphelp_nw04/helpdata/en/7d/eb683cc5e8ca68e10000000a114084/content.htm -
How to Post Intercompany line items- DP93 ?
hi,
I am trying to do intercompany billing using DP93. In DIP profile source is given as Intercompany line items. i have posted activity confirmation.But while doing DP93, i am getting error as non expenditure items found.
Can any one tell , how to set up DIP profile and posting for DP93Hi,
Is DIP profile assigned to your sales orer ( item detail->Sales B tab) and Please check the consistency of your DIP profile by ODP2, check if there is any error?
Furthet check if you have followed the below steps.
There is useful link available in sdn sap wiki with the title intercompany resource related billing.
Check and above steps and revert back.
Regards
Ashu -
Need to stop posting a line item in PR using BADI ME_PROCESS_REQ_CUST
Hi All,
I have a requirement to check the combination of the GLaccount and project and if the combination is not allowed i need to show an error message and to stop the user from saving the Purchase Requisition.
For this i have coded in BADI ME_PROCESS_REQ_CUST in PROCESS_ACCOUNT method.
the badi is triggered and the error message is also shown but it is not stopping the user from saving the Purchase Requisition.
i want to know how to invalidate a line item as we do in PO by calling item->invalidate( ) method.
i couldnt find any method like that in the ME_PROCESS_REQ_CUST BADI.
Please anyone of us let me know how to invalidate a line item of a purchase requesition.
Thanks,
Srinath SHello Srinath
Looking at the signature of interface method PROCESS_ACCOUNT it becomes obvious that you cannot stop processing of the PO requisition here.
You need to implement your validations in method CHECK because here you have a CHANGING parameter CH_FAILED (Nomen est Omen!!!).
Regards
Uwe -
Individual Posting of line items for GR of Subcon Mat'ls
We currently have subcon transactions with outside suppliers wherein we provide rawmaterial1 and rawmaterial2 to produce finished goods. The supply of rawmaterial1 is not stable, thus, in the absence of rawmaterial1, we provide rawmaterial2 to vendor. BOM of the finished goods either contains i) rawmaterial1 only or ii) rawmaterial1 plus rawmaterial2.
Note that, rawmaterial2 is used as subsitute for rawmaterial1 if the latter is not available. For better ilustrations:
If BOM of finished good under subcon has rawmaterial1 only as component:
Warehouseman GR-ed the finisheg good received without consumption for rawmaterial1 since there is no rawmaterial1 provided to vendor. They can not consume the rawmaterial2 used since there is no option during GR to do single item entry for rawmaterial2.
If BOM of plastic material under subcon has rawmaterial1 and rawmaterial2 as component:
Warehouseman GR-ed the finished good received with consumption of rawmaterial2 ONLY since there is no rawmaterial1 provided to vendor. But rawmaterial2 consumed in the system is based only on the quantity computed by system based on BOM. This is understated since rawmaterial2 is also used to compensate for the lack ok rawmaterial1.
Is posting, e.g. single item entry for the use of alternative materials during GR of subcon materials allowed?
We would like to know your thoughts on how we can resolve these issues.
Thank you very much!Dear Barrie,
we had a similar problem and SAP has implemented the OSS-Note 1273522 in order to solve it. It may solve yours, as well. Please check it out.
Regards,
Zeliha -
Is Multiple line items can be posted?
Hi Experts,
From third party system, Fi data is coming into sap through interface, the Basic Idoc for this is ACC_INVOICE_RECEIPT03.
Now , only one item per IDoc they are posting, is it possible, to post multiple line items with this basic IDoc type?
Suggest me.
Regards,
SujathaThe Maximum Limit is 999 only.
Kindly go thru the Link :
Too Many Line Items While Creating a PO -
Tax line items when travel expenses are posted to intercompany
Hello Experts,
We are posting a expense report to a different cost center other than the Master cost center(IT0001). In this case system understanding as intercompany transaction and posting the travel expenses to different cost center and different company code. But the problem is when there is a tax calcualted, this tax is initially getting posted to original master cost center and again transfering the taxes to the intercompany cost center. this is creating an additional FI documents and also additional tax line items which is becoming very difficult for reconcilation.
can any one suggest me where could be the correction required in order to post the taxes to intercompany cost center in the first instance itself.
Thanks&Regards
SrinivasHi Srinivas,
Profit center was not picking for tax line item when we were doing multiple cost center in a TRIP. So we have activated "not deductible" in VST and it got worked.
Later when we got a Cross company employee vendor posting, tax line items are posting in both company codes.
So we have deactivated "not deductible" in VST and activated "set expense company code" in table T706K (to allow cross company code postings in TM)
And defined a new solution in New GL config for the first prblem.
We have not changed anything in "posting indicator" in OBCN, it was 2 (Separate line item) only. You should not change this.
All postings went fine.
Regards
SM -
can anybody please explain me the procedure for posting simulated line items in to FB70 transaction through BAPI : "BAPI_ACC_DOCUMENT_POST". Here I have calculated the tax amounts through FM "CALCULATE_TAX_FROM_GROSSAMOUNT" . Here I am getting simulated items but how to post these through report?
I am able to post the header but I need the procedure to post simulated line items .
Any inputs on this is highly appreciated.
Thanks and Regards,
Hamsitha.using this BAPI BAPI_INCOMINGINVOICE_POST you can post the documents...
-
Enhancement for tax line items to post Business area level
Hi Gurus,
My Client has Business area at state wise. he wants to state wise Tax reports.
Can any one help me how to post tax line items at Business area level.
Please help me if any one know how to do Enhancement on this.
Appreaciate your great help.
Regards,
AshokHi Gurus,
Please help on above post.
Regards,
Ashok -
How to get Header data into multiple times along with the Line Items
Dear All,
I have problem while mapping the Header data and line item data to the flat file structure, Header data have to repeat along with the Line item data in the flatfile.
Details is below.
Example
Header record is one
E1EDK01
E1EDKA1
Line items are two
E1EDP01
E1EDP01
I want in the flat file two records having duplicate data in the fields which is belongs to header data
Like :
Record # partner data Line item data
Record 1 : WE name1 city 00010 materialname1 156
Record 2 : WE name1 city 00020 materialname2 198
( WE name1 city - data is same in the record 1)
For this what I did is I mapped the node E1EDP01 to the flat file message type node then I got all the line item data and first record is with header data but not in the second record.
I tried all node functions but no result because Idoc itself header data exists one record, I am not able to copy.
If any one knows , please give solution.
It is great help to me.
Thanks in Advance.
RamaraoDear Ramarao,
This will help you,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f59730fa-0901-0010-df97-c12f071f7d3b
No Documentation for Mapping Function useOneAsMany (Mapping Problem)
/people/claus.wallacher/blog/2006/04/17/replication-of-nodes-using-the-graphical-mapping-tool
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Thanks & Regards
Agasthuri Doss
Maybe you are looking for
-
Problem with flash player in firefox 12
Problem with flash 11.3 (beta 1,2) in firefox 12. Works in all other browser. Screenshots http://i.imgur.com/OZXvQ.png http://i.imgur.com/VwUzk.png http://i.imgur.com/XbXgV.png http://i.imgur.com/dOT3w.png http://i.imgur.com/aGgg8.png Win 7 Ultimate
-
Select-option in interactive report
Hello , this is urgent requirement. I have one report in which in the basic report i need to display the table name like mara, mard, marc etc etc 100 table is there. when i click on the particular table , in the secondary list the key field of the se
-
Send state message to SCCM after uninstall of SCCM client
Hi Everyone, I have a batch file to uninstall the client from PC's, how would I could I send a state message back to SCCM to say the uninstall was successful? Asking because the console doesn't come back with success info, just waiting, and accepted
-
What do you use to write Java programs?
Hi. Do you mind if I ask you what do you use to write your programs in Java? I am a student and we are using NetBeans IDE 3.6. I know it is a bit old but the tutor says we must stick to that one. What is best for writing Java programs? Thanks.
-
New iPod OS won't update!!!
Alright- Just five minutes ago I fixed my "priveleges" problem by downloading iTunes 7.4.3, BUT.... Have you seen the new iPod OS, like in the new nanos? Whenever i try to update the iPod it just says: Your iPod software (version 1.2) is the newest v