Posting Dump

Dear Team
We have upgraded from Ecc4.6c to 6
During simu we didnt come across any errors but when doing the live run for an employee theres a screen dump.
Please let me know if we got to run any report to overcome this dump error.

Search for OSS notes!Surly There would be any .

Similar Messages

  • Idoc posting dump error GETWA_NOT_ASSIGNED

    Hello,
    While trying to post an inbound shipping notification
    Process code DELS msgtyp DESADV idoc type delvry01
    iam getting a dump error GETWA_NOT_ASSIGNED Iam using standard fun module..Can anyone help why that dump happens...?
    while the fun module hits the first perform DESADV_IDOC_PARSE the dump happens in the statement shown..
    The error is Field symbol has not yet been assigned but its a std module iam using...
    Can you pls help..
    Thanks,
    Larry
    000470   * check basis idoc type                                        
         >     READ TABLE IDOC_CONTRL INDEX 1.                              
    000490     IF IDOC_CONTRL-IDOCTP NE 'DELVRY01'.                         
    000500       MESSAGE E029(E0) WITH IDOC_CONTRL-IDOCTP TEXT-001          
    000510               'IDOC_INPUT_DELVRY1' RAISING WRONG_FUNCTION_CALLED.
    000520     ENDIF.                                                       
    000530                                                                  
    000540     CLEAR:   F_STAT, F_TIDX, T_DLGN, T_VSEK, T_VSEP,             
    000550              S_DL20, S_DT13, S_DRM1, S_DRE1, S_DL24,             
    000560              S_DL41, S_DL37, S_DL44.                             
    000570     REFRESH: T_DLGN, T_VSEK, T_VSEP.

    Iam using 4.0 version of SAP
    Larry

  • Live posting Dump

    Dear Team
    When I am doing the posting for an employee for whom the months Pay is Nill in Simulation with tcode pc00_m99_cipe its working fine.
    But when I am doing the LIVE posting theres screen dump.
    Error in breif-----
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was
         caught in
        procedure "DATA_TOP_FILL_TEXTS_ERR" "(METHOD)", nor was it propagated
         RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component (variable: "ME->CL_ALV_GRID_TOP_ERR").
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.
    Let me know if theres any note to be applied as we have upgraded from Ecc4.6c to 6
    regards
    Iyer

    From 46C to ECC 60, SAP made some changes to posting program RPCIPE00. Existing RPCIPE00 was copied over to RPCIPE00_OLD, and modification was made to RPCIPE00 after that. With the new RPCIPE00, there're some additional configuration needed for tax wt for posting.
    First, try to run posting with the old program RPCIPE00_OLD in production mode (should be compatible) and see if the dump is resolved. If it is, you can just run posting with the old program for now until you're ready with the additional configuration for the new payroll posting.
    Rgds.

  • 1z0-897 java web services certification dumps needed

    Hi,
    Can you please tell me if any one has take the 1zo-897 exam recently and share their experience. Also please post dumps if you get a chance...
    Thanks
    Nithin

    Have you checked Oracle Press http://bit.ly/URFuwt?
    Regards,
    Brandye Barrington
    Certification Forum Moderator

  • How do I obtain a set of Windows 7 recovery/installation discs (in my case T400)

    Half an hours fruitless searching on Lenovo sites has not go me the answer. Well maybe a part number - 04T1506.
    Also most helpful links in old posts dump you out to the general support page at Lenovo.
    So here's the issue: At work I have a nice Lenovo laptop and have decided to get a used/refurb T400 for home. There are plenty to choose from. A large proportion state that Windows 7 is pre-installed.
    The first thing I would do with the machine is a total disc wipe and clean install of Windows 7. Becuase I would have no idea what viruses/stealthware might be on the machine. No system recovery procedure would satisfy me. This is exactly what I've done on previous Windows XP based Lenovos I've had - but I had a 6-disc set called "Product Recovery CD for Type RnR'.
    So what does one do with a used (or even departmentally transferred) Windows 7 T400?
    How do I order something like part 04T1506? There's no obvious shopping option on the page it's listed on - e.g.
    http://support.lenovo.com/en_GB/product-and-parts/detail.page?LegacyDocID=MIGR-72806
    I want to feel sure about the obtainability and cost of such a disc set BEFORE I make my T400 purchase.
    Also, will a license key be needed and will the one on the sticker thats supposed to be attached to the T400 work?
    (plenty of reports that these stickers get worn to unreadability)
    (in my previous XP case, the OS was recognized as being an OEM one so no key was asked for).
    I am sure the answer to this - surprisingly not covered in any Lenovo FAQ - will be of interest to other Lenovo enthusiasts too.

    Hi,
    You have a few options depending on the "new" machines configuration.
    If it came with Windows 7 installed and the recovery partition is intact, you can do a reset to factory state using Rescue and Recovery.  For that matter, maybe it will come with a user-burned set of recovery media.
    If it was a Win 7 machine you can do a clean install of Win 7 and activate with the CoA sticker's key - if it's readable.  Follow that by a ThinkVantage System Update install and use it to pull down the appropriate drivers.  Install ISOs are available for download - or borrow install media.
    You can contact support.,  They should be able to sell you recovery media - or refer you to someone who can.  Here in the US support can provide the media.  This is if your machine was originally licensed for Win 7.  If it was a Vista machine, support won't provide '7 media.
    Otherwise you're looking at buying MS Win 7 media and doing a clean install.
    Z.
    UK support:
    United Kingdom
    THINK-branded products
    English
    08705-500-900
    (Standard warranty support)
    9 AM - 6 PM
    Monday - Friday
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • SAP B1 9.0 upgrade fail on Windows 8.

    Hi,
    I am unable to upgrade SAP B1 9.0 PL 06 on my laptop, error message is attached with this thread. 
    Please suggest any solution.

    Hi,
    1. There is no problem with base version. You can upgrade 8.81 PL06 to 9.0 PL06
    2. Follow system and hardware requirement guide as well as Admin guide for installing 9.0 version which can be downloaded from SAP business one customer portal
    3. If possible post dump file information here to check.
    Thanks & Regards,
    Nagarajan

  • The error 600 occurred in the current database connection "LCA".

    Hi All,
    User is executing job /SAPAPO/TS_REALIGN_COPY in background,  as soon as the job is released its failing with runtime error:
    I check the Note 1126394 but not relevant.
    Runtime Errors         DBIF_DSQL2_SQL_ERROR
    Exception              CX_SY_NATIVE_SQL_ERROR
    Date and Time          18.08.2011 00:03:39
    Short text
         An SQL error occurred when executing Native SQL.
    What happened?
         The error 600 occurred in the current database connection "LCA".
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    How to correct the error
        Database error text........: "POS(1) Work rolled back: BAD_ALLOCATION in
         SAPTS_COPY_DA"
        Database error code........: 600
        Triggering SQL statement...: "EXECUTE PROCEDURE SAPTS_COPY_DATA"
        Internal call code.........: "[DBDS/NEW DSQL]"
        Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "DBIF_DSQL2_SQL_ERROR" "CX_SY_NATIVE_SQL_ERROR"
        "/SAPAPO/SAPLOM_TIMESERIES" or "/SAPAPO/LOM_TIMESERIESU20"
        "/SAPAPO/OM_TS_DATA_COPY"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
    Information on where terminated
        Termination occurred in the ABAP program "/SAPAPO/SAPLOM_TIMESERIES" - in
         "/SAPAPO/OM_TS_DATA_COPY".
        The main program was "/SAPAPO/TS_RLG_COPY_SINGLE ".
        In the source code you have the termination point in line 57
        of the (Include) program "/SAPAPO/LOM_TIMESERIESU20".
        The program "/SAPAPO/SAPLOM_TIMESERIES" was started as a background job.
        Job Name....... "/SAPAPO/TS_REALIGN_COPY"
        Job Initiator.. "CIBERNLAPO2"
        Job Number..... 00015100
        The termination is caused because exception "CX_SY_NATIVE_SQL_ERROR" occurred
         in
        procedure "/SAPAPO/OM_TS_DATA_COPY" "(FUNCTION)", but it was neither handled
         locally nor declared
        in the RAISING clause of its signature.
        The procedure is in program "/SAPAPO/SAPLOM_TIMESERIES "; its source code
         begins in line
        1 of the (Include program "/SAPAPO/LOM_TIMESERIESU20 ".
    Kindly suggest any notes or is any setting needs to be modified.
    Regards,
    Kaasi

    Hello Ada,
    the job was aborted due:
    Database error text........: "POS(1) Work rolled back: BAD_ALLOCATION in 
         SAPTS_COPY_DA"
        Database error code........: 600
        Triggering SQL statement...: "EXECUTE PROCEDURE SAPTS_COPY_DATA"
        Internal call code.........: "[DBDS/NEW DSQL]"
        Please check the entries in the system log (Transaction SM21).
    From the posted dump.
    Was it lack of OMS heap memory, memory leaking, program error or huge data selection for application run it's not clear. It will be best for SAP customer to create the SAP message and get SAP support when application canceled due Database error BAD_ALLOCATION in  LCA routine.
    Regards, Natalia Khlopina

  • Succesful IDOC acknowledgements from ECC

    Dear MDM gurus,
    What is the best way to handle acknowledgements from ECC (INTO MDM) for inbound IDOCS from MDM (MDM->XI->ECC).
    We want it such that when an IDOC gets posted into ECC succesfully,it should send an acknowledgement signal back to MDM saying that IDOC was received properly.
    Thanks.

    HI Mugdha,
    I have a concern on the Acknowledgement (ALEAUD) Idoc. I have implemented this scenario wherein DEBMAS IDoc is posted from MDM -PI - ECC and ECC sends back the acknowldgement using ALEAUD Idoc.
    However, in PI (SXMB_MONI) there is no separate message entry created for this acknowledgment. The ALEAUD acknowldgement message details is attached to the original DEBMAS message which was triggered from MDM - PI - ECC. Due to this, PI interface created is not able to read the acknowledgement message and process it to post/dump the target file onto the MDM Port.
    I tried triggering and ALEAUD Idoc manually using PI - RWB which generated a separate message for ALEAUD Idoc in sxmb_moni and then my target file was created in MDM (But this is just a manual way of testing the PI interface).
    Can you advice on how this concern can be dealt with?
    Thanks in advance,
    Elizabeth.

  • Bluetooth disappeared from System Preferences

    When I fired up my PowerBook G4 this morning my Bluetooth is no longer available. When I go to System Preferences the Bluetooth preference is not there. I've rebooted to no avail.
    I've also noticed funny things with the Bluetooth icon in the menu bar ever since upgrading to Tiger. The location of the icon keeps moving to the spot next to Spotlight. It won't stay where I put it.
    Has anyone else run into this problem?

    Updating to 10.4.6 caused me to lose Bluetooth on my 17" Powerbook G4. I zapped the PRAM (3 times, as was suggested in an earlier post), dumped the Bluetooth preferences, and even re-installed the System Update. Still no Bluetooth.
    The Bluetooth was working perfectly prior to the update. Now the System Profiler indicates there is no Bluetooth on this machine, which, of course, is not true.
    Any ideas?

  • Event Source: Involflt , Event Id:68

    Hello 
     I have done Windows updates few days ago on Server 2008 R2 and it crashed/reboot yesterday. Upon reviewing Crash Dump it point to the following.
    I did extensive search and can't find any information on the following error, please if some one point me to right direction in order to avoid server crash issues. 
    Event Type:        Error
    Event Source:    involflt
    Event Category:                None
    Event ID:              68
    Date:                     2/20/2014
    Time:                     9:59:32 AM
    User:                     N/A
    Computer:          PK-LA-REMOTE
    Description:
    Previous Change node Last Time stamp ffffffffffffffff is greater than Current Change node First Time stamp 1cf2d266eee5dda (1:1).
    Data:
    0000: 00 00 00 00 05 00 52 00   ......R.
    0008: 00 00 00 00 44 00 12 e1   ....D..á
    0010: 38 14 00 00 00 00 00 00   8.......
    0018: 00 00 00 00 00 00 00 00   ........
    0020: 00 00 00 00 00 00 00 00   ........
    Syed

    Hi,
    Since the server crashes, you may collect and post dump file for further troubleshooting.
    But forum is not the best place for analyzing dump. It’s suggested to contact Microsoft Customer Support Services (CSS) so that a dedicated Support
    Professional can help you on this issue.
    To obtain the phone numbers for specific technology request, please refer to the website listed below:
    http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS’
    If you are outside the US, please refer to http://support.microsoft.com  for regional
    support phone numbers.
    Thanks for your understanding.
    Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

  • Backup the entire sybase database

    I am doing a project in avaya. I installed ipocc(a avaya product) in windows.
    Ipocc it self have sybase database. I try to take a backup it show me threshold error.
    The error is i mentioned below
    Backup Server: 4.172.1.1: The value of 'reserved pages threshold' has been set to 85%.
    Backup Server: 4.172.1.2: The value of 'allocated pages threshold' has been set to 40%.
    Backup Server session id is: 25. Use this value when executing the 'sp_volchanged' system stored procedure after fulfilling any volume change request from the Backup Server.
    Backup Server: 4.135.2.1: Invalid Device: you cannot dump to or load from a directory, 'C:\Users\Administrator\Desktop\Backup'.
    Error encountered by Backup Server.  Please refer to Backup Server messages for details.

    that's not a command, that's a path
    see if you can open a query window, and run the command manually
    e.g. the command that Bret already posted
    dump database mydatabase to 'C:\Users\Administrator\Desktop\Backup\mydatabase.19Jan2015.dmp'
    replace mydatabase by the actual database name.
    Or run a test for the master database, which should create a small backup file
    dump database master to 'C:\Users\Administrator\Desktop\Backup\master.19Jan2015.dmp'
    just a side comment, your desktop might not be the best place to store backup files...

  • FM 10 crashes when editing an equation subscript

    I obtain the following error message when editing a subscript in an equation:
    The error dump is:
    === Header Begin ===
    Internal Error: 10024, 7687848, 7688138, 10076935
    FrameMaker 10.0.2 for Intel
    Build: 10.0.2.419
    Window System: MSWindows
    Operating System: Windows NT 6.1 (major.minor.build: 6.1.7601 Service Pack 1)
    Generated on: 06 March 2012 11:34:15
    To file: [REMOVED]\AppData\Roaming\Adobe\FrameMaker\10\FrameLog_12.03.06_11.34.15.txt
    === Header End ===
    [Details deleted by host]
    Does anyone have any idea on how to fix this?

    ... you shouldn't bother posting error dumps in the forum ...
    I'd like to suggest that, if possible, the OP edit the basenote and delete everything after:
    === Header End ===
    so that future new users don't assume that posting dumps is desired on the forum.

  • Music features in iPhone???

    Hello all,
    I am a newly converted PC user (first post), dumped my Vista box for a new iMac and I'm loving every minute of it. I have been looking at getting an iPhone since launch and now that the price drop is out, I think I will jump. (Sorry early adopters, but this does happen in the mobile industry all the time, i.e. Razor).
    I do have a question for current owners, does the iPhone already have all the features they showed on the iTouch today? I am planning on getting a new Nano for my running, (Love that new interface), but was wondering if the features, and layout of music on the iTouch was already built into the iPhone. Things like "tapping" and album and getting the song list, the visual volume/playback controls, etc.
    If these features are not in the iPhone, has anyone heard if they are planning these in a software update? Since Apple says the iPhone is the "best iPod ever", I think it should be able to do anything exactly the same way the iTouch does. Anyone agree?
    Thanks for reading/replying,
    Luke
    P.S. I think the wi-fi store is coming to iPhone, but can't confirm. Does anyone else know?
    EDIT: Steve confirmed in the presentation that it the wi-fi store will come to the iPhone.

    WS6,
    Thank you for your reply. I think I will wait about a week or so and try to go pick up a new iPhone and new Nano at an Apple store. Boy, Apple is getting a ton of my money this year with my new iMac, .mac, iPhone, Nano, and the coming Leopard. Oh and I want that new wireless keyboard and mighty mouse. Big year for them! Now bring on the "refreshed" macbook pro and I'm set!
    --Luke

  • FireWire message

    I wonder, why might my Nano be telling me that "FireWire connections are not supported" and to "connect the USB cable provided" when, as I only own one iPod, it is already connected with the provided USB cable and happily playing songs through iTunes?
    Answers on the back of a post card.

    Thanks for your suggestions, but they had all occurred to me, and I know that a dock connector is used for connecting to odd devices, but why? When all I need to connect to a stereo is the 3.5mm jack? Who in their right mind uses their iPod connected to a TV? With TVs getting bigger and high definition starting to take off who is going to use the compressed data on an iPod to drive it?
    We're getting into the realms of questioning Apple's decisions now and I'll get my posts dumped, again.
    What I was hoping someone might know was:
    Is the FireWire confusion a common issue?
    And:
    Was it something to do with the software, or could it be confused by a simple mechanical fault such as a bent pin or some other short that would not affect the normal operation of the iPod?
    I carry my iPod around in my pocket (I assume most people do, there not being enough loonies in the world to have bought a lanyard to wear it round their neck or an elasticated band to wear it round their arm, or to synch it with their shoes, etc.....) and so the socket on the bottom fills up with fluff and other debris which may have been interfering with the connections.

  • BAPI_GOODSMVT_CREATE short dump while posting a GR for inbound delivery

    Dear Experts,
    I am using BAPI_GOODSMVT_CREATE to post a goods receipt for a PO using Inbound Delivery
    here is how I am populating bapi input parameters:
      lw_goodsmvt_code-gm_code = '01'.
      lw_goodsmvt_item-deliv_numb =  lw_inb_delivery_items-delivery.
      lw_goodsmvt_item-quantity = lw_inb_delivery_items-deliv_qty.
      lw_goodsmvt_item-entry_qnt = lw_goodsmvt_item-quantity
      lw_goodsmvt_item-no_more_gr = ''.
      lw_goodsmvt_item-move_type = '101'.
      lw_goodsmvt_item-mvt_ind = 'B'.
      lw_goodsmvt_item-STGE_LOC = '0001'.
        lw_goodsmvt_item-po_number and   lw_goodsmvt_item-po_item are populated as well.
    When I execute the BAPI I get the short dump
    Message Class: 'VL'
    Number = 143
    in the module MB_POST_GOODS_MVT and a reference to 385830 note.
    Would you please help me how to solve this problem?

    from the dump the error orrcurs here:
    CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
            EXCEPTIONS
              error_message = 4.
    As soon as we have started to put things into UPDATE TASK, we must
    ensure that errors definitely terminate the transaction.
    MESSAGE A is not sufficient because it can be catched from
    external callers which COMMIT WORK afterwards, resulting in
    incomplete updates. Read note 385830 for the full story.
       IF NOT sy-subrc IS INITIAL.
    >      MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
                     sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        MESSAGE A263.
       ENDIF.
    The short text of the error is: Cannot be processed with this transaction.
    Can you tell me if my BAPI Call is correct to post GR in Inbound Delivery?

Maybe you are looking for