Posting from qm stock to unrestricted stock ........URGENT HELP NEEDED

User created a Purchase order and posted it to qm stock.The inspection lot is created for the Purchase order with these status CRTD, REQ,CHCR,SPRQ. How do I post the stock from QM stock to unrestricted stock.
in QE51N also it gives me an error saying "no selected entries found "
I tried to change the usage decision in tcode:qa32 or qa12 but it is giving me an error not and  letting me change it.
So my question is how do i post the stock to unrestricted stock .Please can someone explain with detailed steps.
thank you

Devang,
Check the following points
1. Check if inspection plan is assinged to inspection lot, if inspection plan is not assinged. Assign inspection plan to material and go to qa02 & calculate sample size.
2. Check if more than one inspection plan asssinged to material , it mutiple inspection plan assinged to material , you need to manuallly assign the inspection plan to inspection lot and calculate sample size.
Sanjay

Similar Messages

  • Problem in BAPI for stock posting from quality inspection  to unrestricted usage

    Hi all,
    I am using BAPI_GOODSMVT_CREATE for  stock posting from quality inspection  to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
    GOODSMVT_HEADER:
    PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
    GOODSMVT_CODE:
    GM_CODE:  ‘04’ .
    GOODSMVT_ITEM:
    MATERIAL = MATERIAL NO
    PLANT = PLANTCODE
    STGE_LOC = ‘WIP’
    BATCH = BATCHNO
    MOVE_TYPE   = ‘321’
    ENTRY_QNT = 100
    ENTRY_UOM =  ‘EA’
    ORDERID =  Prd ord no.
    After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
    Kindly help me.

    Hi Naveen,
    Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
    BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
    Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

  • Posting of QI stock into Unrestricted stock (URGENT)

    Hi All,
    At the moment, we are posting QI stock into Unrestricted stock using MB1B with Mvt type 321. But the problem is we have to enter each material & qty manually, i,e, if a PO has 10 lines, i have to manually enter each material in the PO & then the qty. Is there any other transaction or way in which i can do this transfer posting with reference to the PO, thereby the system automatically puts the lines in that PO & i can then delete the material or modify the qty if it has not passed QI check.
    I tried in MB1B with Mvt 321 by creating with reference to PO, the system prompts an error & says not possible.
    Hope my problem is clear, await inputs.
    Vivek

    Hi Aasif,
    As mentioned by you i have done the settings.
    1. If i enter the mvt. type 321 in MB1B & then click on create w/ ref to PO, i still get an error.
    2. But if i just enter the mvt 321 & enter inside MB1B, there i now see a field called Purchase order. But if i enter the purchase oder number here, the materials inside this PO are not automatically displayed, the screen just becomes grey.
    What i actually want is, when i enter the PO number, the materials should be displayed, which would resolve my issue.
    Await your inputs.
    Vivek

  • Releasing stock from return stock to unrestricted stock

    Hi all
    Can anybody tell me how to move the stock from return order stock to unrestricted stock so that goods which is been returned from customer can be sold to another customer?
    Regards..,
    Karthik

    Hi,
    If u want to post the stock to ur own location for future use u can use
    MB1B transaction and with movement type 453 you can post it
    hope it will help
    regards,
    santosh

  • Pointers Needed on Movement from Blocked Stock to Unrestricted Stock !

    Hi Gurus,
    I have a scenario wherein I need to take care of "Movement from Blocked Stock to Unrestricted Stock using Movement type 343 and in the next step need to do Material to Material transfer using movement type 309"
    My Query is:
    1. What does it mean when we say Movment from Blocked stock to Unrestricted stock ?
    2. What does it mean when we say Material to Material transfer ?
    Please help me with pointers on finding a BAPI to do the above stock movements or material to material transfer.
    Many Thanks,
    Madan

    Hi,
    Please help me with pointers on the mapping parameters for this BAPI.
    Here are the details which I am using, but gettin error message -
    T ID                   NUM MESSAGE
    E /CWM/MM              001 Transfer the parallel entry quantity/entry unit of measure
    I have filled below fields:
    GOODSMVT_HEADER
           PSTNG_DATE                   11/25/2009
           DOC_DATE                       11/25/2009
           PR_UNAME                        MyName
           HEADER_TXT                    TEST
    GM
    04  (Transfer Posting)
    GOODSMVT_ITEM
               MATERIAL                       100001374
               PLANT                          1AAE
               STGE_LOC                       B100
               BATCH                          0111331309
               MOVE_TYPE                      343
               ENTRY_QNT                                10.000
               ENTRY_UOM                      EA
               ENTRY_UOM_ISO                  EA
               MOVE_MAT                       100001374
               MOVE_PLANT                     1AAE
               MOVE_STLOC                     B100
               MOVE_BATCH                     0111331309
    Need your help to resolve this.
    Many Thanks,
    Madan

  • Report for material moved from blocked stock to unrestricted stock

    Hi,
    Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
    Regards,
    Pratap

    It would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
    Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria.

  • How to post return stock to unrestricted stock for only Plant & Material Type combination?

    Hello Everyone,
    At present, whenever the stock is returned then it posted through 655 movement type. So, material is posted as quality stock.
    Now, the requirement is to post the stock to unrestricted stock for Plant and Material type combination only. Which means, if the plant is 1413 and the material type is ERSA, VERP, and HIBE then for return sales order system post the stock directly to unrestricted stock, instead of quality stock.
    So, is there any standard way of configuring the above scenario without going for validation (Z Fields)?
    Regards
    Anwar

    Dear Mohammed ,
    as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
    as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
    follow the below logic to achieve your issue .
    you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
    wait for other experts solution , if any standard is possible or not  .
    Regards,
    C.B Reddy.

  • Bapi to move Quality inspection stock to unrestricted stock

    Hi All,
    I am developing a report where the  material batches should be distributed  to other storage locations within a plant (as we do it in MB1B with movement type 311).But if that material is in QI stock( inspection lots) then that should be forcibly moved to unrestricted stock.Is there any BAPI available to mimick QA11 and force the material from QI stock to unrestricted stock.
    Thanks in advance,
    Pramod

    Hi Peter,
    The requirement is to mimick the transaction QA11.I am all ready using the BAPI_GOODSMVT_CREATE to post the goods from unrestricted stock.But,to move the stock under QI inspection I have to first move it to unrestricted stock and then post it.Is there any other BAPI available for mimicking the transaction QA11.
    Thanks,
    Pramod.

  • RE: Conversion of Restricted stock to unrestricted stock

    Hi All,
              After PO when the stock is posted to storage location the stock is posted to restricted stock by default, where batch management and classification is involved. I want to know why the stock is posted in restricted stock or at least I want to know to convert restricted stock to unrestricted stock.

    Hi,
    If you want to change the batch status from restricred to unresticted use you can do in MSC2N
    If you want to change the configuration to select Unresticted use goto
    SPRO > Logistic general > Batch management > Batch status management > Activate Batch Status Checking in Warehouse Management.

  • Blocked stock to unrestricted stock in wm

    Dear all,
    i want to move the stock from blocked stock to unrestricted stock in WM.our issue is there is no stock availability of Blocked stock in IM.
    Is there any manual transfer available in wm for the same. what could be possibilty for the above issue.i.e stocks available in wm not in IM.
    Kindly guide me
    Regards,
    velu

    In WM
    Posting change from blk.to un rest.
    1) LU01- MOV TYP 309,
    2) LT05
    Question?
    A)have you already done the transfer posting in IM? otherwise where is the stock in IM and why it is available in WM?
    b) If you have already done in IM try to find the mat. doc?In the mat.doc you see in the WM View posting change number,enter the posting change number in LT05 !
    If not solved pls check LS 26,let me know the Stock status...
    Regards,
    eswarmanu...
    Edited by: eswarmanu on Nov 18, 2008 6:40 AM

  • RE: VELO Return blocked stock to unrestricted stock

    Dear experts.
    I have a situation where once again i would appreciate any help.
    We are doing returns in VMS for an automotive company. All my code is working and my program creates a return, return delivery, goods reciept and credit memo in vms.  My problem at this stage is when i try to move this vehicle from blocked stok to unrestricted stock (Action REUS) the Bapi returns with a message complaining about a notification class. However if i run transaction velo for the exact same vehicle and try to do action REUS the log tells me that the account requires an assignment to a CO object.  I can however not just include this in config as our FI consultant says this would influence all movements into and out of this account.  I need to code it into my program.  And pass the profit centre to the bapi.  I am using BAPI_VEHICLE_CHANGE_MULTIPLE but can not find any place to pass the profit centre.
    ANY HELP?????
    PLEASE.
    Kind Regards

    Hi Griphen
    I think that is a CO configuration problem, VMS donu2019t influence the determination profit center , ask: you are returning the vehicle at the same plant?
    Best regards
    Pablo Aguila

  • Transfer of on-order stock to unrestricted stock

    Hi gurus,
    Could any of you please tell me. I want to transfer on-order stock to unrestricted stock.
    Regards,
    Abhik

    hi
    i think there wont be any Purchase order stock.
    tell me one thing where the stock is lying now.
    if you created the PO, then you need to do the Goods Recipt against the Purchase order document  i.e from t-code MIGO movemnt type 101.
    -ashok

  • IPhone 4 reset itself, photos lost -URGENT HELP NEEDED

    Hi there,
    Urgent help needed!!
    Tonight I was taking extremely important photos throughout an event on my iPhone 4, however, my iPhone 4 ran out of battery once I was near a charger I plugged it in and for some reason my iPhone had reset itself. Back up icloud options were from yesterday, but the photos that I was taking at the event are needed urgently. Is there any way possible I can recover the photos that were taken?
    Thanks in advance!!!!

    Slymm71 wrote:
    just had similar problem got email from find my phone saying initiating full phone wipe this cannot be stopped ***? i own the phone from new and registerred in m name but wiped whilst i was using it !!!
    See your other post... 
    https://discussions.apple.com/message/18876037#18876037

  • Data uload to ODS ending up with an error. URGENT HELP NEEDED!!!!!!

    Hi
    My Sceniro is Full load from ODS1 to 5 other ODS. Iam uploading the data to other 5 ODS by selecting 1 ODS at a time.
    Problem i am facing is upload is ending up with error mesg. Error Mesg are
    <b>Error 8 when starting the extraction program - R3019
    Error in Source System - RSM340
    Req xxx in ODS2 must have QM ststus green before it is activated - RSM1110</b>
    I have seen the the OSS notes for given error no, but they are not applicable to me. what could be the other possible solution.
    In detail tab of the monitor i see red light at Extraction step and Subseq. processing.
    Its quite urgent bcoz this error is occuring in Production system.
    Plzzzz urgent help needed.
    Thanks
    Rohini
    Message was edited by: Rohini Garg

    rohini,
    go to RSA1->Modeling->Source Systems and right-click on your BW system, and click on 'Replicate Datasources'.
    also, go to the ODS that's causing the problem (via RSA1->InfoProvider and go to your ODS), right click and click on 'Generate Export Datasource'.
    one more thing, make sure that all your record/s in the source ODS is active. if you're not sure manage its contents and click on 'Activate'. if there are any entries in the the next screen that comes up, you need to activate it first, then try everything again.
    let me know what happens. also try to look for error messages in ST22 and SM21 that may be related to this and post whatever possible error you see there here.
    ryan.

  • URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

    My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
    I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
    I've tried switching to another USB port of my MacBook. No luck.
    My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
    I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
    Urgent help needed & appreciated. Millions of thanks in advance.
    Gary

    1. I used both cables - theirs & mine ... and on several macs
    2. yes, same cable for wall & mac
    3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
    anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

Maybe you are looking for

  • Tracking memory usage

    I have run to a memory limitation problem with my MIDP 1 application. So I'm trying to track memory usage. However I found out that WTK memory monitor gives me different results then Runtime memory functions (by calling Runtime.getRuntime().freeMemor

  • What adobe product will allow me to edit a pdf file in its orignal form.

    What adobe product  will allow me to edit a pdf file in its orignal form. I want to scan in a document in its orignal form and edit the document. Is this possible?  Please help where and how. Thanks

  • SD Process Design for Plantation industry - need advise

    Hi all experts, I am implementing for a crude palm oil plantation company, in which the general flow of the sales process from Estate to the Milling Plant is as below: Sales Order --> Delivery Order* --> PGI --> Billing* Sales Order: The fresh fruit

  • JDBC to Idoc Mapping error

    Hi all, i need help for my JDBC to IDoc-scenario. I Select some data from the db and everything is fine. Before the mapping I can see all in the payload, but after mapping only the constants were mapped. Hope someone can help me. Regards, Jörg

  • Dynamic ResourceBundle without the physical file.

    Hi guys, We have a product that runs in a web environment which should allow customers to translate the bundle entries at runtime and the changes to be picked up without re-deployment.  We successfully achieve the goal of translating the resources th