Posting Goods Receipt PO partial delivery

Hi SAP gurus,
For example:
PO # 1
Item Code = Item001
Quantity = 5
Then for partial delivery , I received first 3 pcs of item001, then the last remaining 2 quantities will be delivered and received on the next day and thats the time the PO # 1 status will be closed. how can I do it on my c# program? I try to use the baseEntry and baseType for partial delivery but didn't work. using the baseEntry and baseType will automatically received all the items on the PO and closed it's status.
Please help me.
Thanks and best regards,
Regual

Hi Regual,
Please don't double post.
Regards,
Johan

Similar Messages

Batch needs to be created 1st then post goods receipt with inbound delivery

Hi,
We are having split valuated materials with batch managed, we need to post goods receipt with inbound delivery.
When we create inbound delivery with PO batch is blank which is correct.
Now when we try to post GR with IBD in VL32N we need to put batch, but we are getting error message as batch is not available in receiving plant.
In this case we have to create batch 1st with MSC1N and then we can put batch number in Vl32N and can post GR.
If material is not split valuated we can put batch manualy(Without creation in MSC1N) in VL32N and it is allowing to post GR with batch.
Can you please let me know this behaviour, is there any SAP note available about this behaviour.
Thanks
Sudhir

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

Inbound IDOC to post goods receipt with inbound delivery as reference

Kindly let me know the message and IDOC type for
Inbound IDOC to POST GOODS RECEIPT with inbound delivery as reference
I tried using WMMBXY but it didn;t work.
Pls let me know asap.Your help is appreciated.
Thanks and Regards
Priti
Edited by: Priti Adukia on Feb 11, 2008 4:48 AM

Hi Nicole,
What I've to do is quite the same as the case. Outbound and Inbound are in the same SAP system. If I've good understanding, I must set partner profile as follows :
INBOUND - Parter LI with
                        Message DESADV
                        Operation code DELS
OUTBOUND - Partner KU
                        Message DESADV
                        Operation code ???
Please advise
Suchart

Post Goods Receipt for Inbound Delivery using WHSCON IDoc

Dear All
Currently I am working on a big project dealing with EDI connections to our logistics partner for the Export business. The entire message flow between Lindt and our partner should be via EDI. Our SAP release is (still) 4.6c.
We will create two kinds of despatch advice messages, one for inbound deliveries and one for outbound deliveries for customers.
I would appreciate your support in the following problem that I am facing with the inbound delivery scenario:
We create stock transport orders (purchase orders, POs) for the goods intended to be delivered into the plant at our partner
We create a delivery (type NL = replenishment delivery) for this POs
As soon as we post the goods issue we send the despatch advice (as EANCOM D96A DESADV message) to our partner.
At this point the delivery is basically completed, i.e. packing status (PS) and goods movement status (GM / GS) are equal to 'C' (= completed).
Our logistics partner uses the same EDI message to send us the goods receipts data, e.g.:
We dispatched 50 units of a product => QTY:50:12
The partner received indeed 50 units => QVR:50:66
Please note that we do not use the QVR segment for the quantity difference (between despatched and received quantity) but it contains the received units. This way we avoid negative values in the QVR segment.
When the logistics partner sends back the DESADV message containing the received quantities (QVR segment) we want to make
the goods receipts for the products in the original stock transport order and
upate the message flow in the delivery
My idea was to transform the incoming DESADV message into a WHSCON.DELVRY03 IDoc based on the documentation in: [Delivery Interface|http://help.sap.com/saphelp_crm40/helpdata/en/e2/654b15a9f411d184ec0000e81ddea0/content.htm]
In the delivery header control E1EDL18 I used QUALF = 'PGI' (Post goods issue).
I prepared an inbound WHSCON IDoc according to the documentation mentioned below. I managed to get some feedback from the Idoc processing implying that the system tried to do the goods receipt in the PO but failed.
To make a long story short here are my questions:
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
Does anybody have an example on how to fill the WHSCON IDoc?
Or is my approach a cul-de-sac ?
Kind Regards
Uwe
PS: A related question can be found here: Goods Receipt in PO AND Message Flow Update in Inb. Delivery using WMMBXY

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

Post Goods Receipt from Inbound Delivery

Hi,
I need to find a customer enhancement or a BADI that is modifyed a field when a Post Goods Receipt is created for an inbound delivery, in transaction VL32N.
I have tried to use the Business Add-In LE_SHP_GOODSMOVEMENT, but the field I modified after is overwritten. It is a field of the mseg structure.
Can anybody please advise on the available exits or BADIs?
Thanks

Hi,
Please clarify whether you want to modify th efield at item or header. Please check the Badi names Starting with LE_SHP* .These BADI' are for Delivery.find the Suitable BADI and Apply it. For custom tab at header BADI is LE_SHP_TAB_CUST_ITEM
LE_SHP_TAB_CUST_OVER
The BADI does not allow the update of data. There is a common trick used to perform the job ...
- in the BADI, export the data to memory (e.g. in TRANSFER_DATA_FROM_SUBSCREEN)
- in the old-fashion exit like USEREXIT_MOVE_FIELDS_TO_LIPS, import the data and map it.
I hope this will resolve your issue. Thanking you.

Post Goods Receipt for Inbound Delivery via IDoc SHPCON (DELVRY03)

hi all,
I'm using IDoc SHPCON (Delvry03) for posing goods receipt for inbound delivry.
Can anyone give a sample IDoc or tell which segments must be filled.
Thanks!
Regards,
Hui

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

Post Goods Receipt for Inbound Delivery with BAPI_GOODSMVT_CREATE

Hello,
I try to post GR for an Inbound Delivey with BAPI_GOODSMVT_CREATE and it is not working.
I know delivery number and PO number and give both to the bapi.
I am not sure how to set the movement indicator in the item.
When I set it to B.
I do get a shortdump from MB_POST_GOODS_MOVEMENT numer 143, stating that this type of movement is not allowed with this transaction
when setting to L I do get an error stating
"Update control of movement type is incorrect (entry 101 X X _ L)" from message class M7.
Below is the coding for it.
Thank you very much for your help
Michael
* Füllen der Kopfdaten
ls_gm_header-pstng_date = sy-datum.
ls_gm_header-doc_date = sy-datum.
ls_gm_header-ref_doc_no = delivery_header-lifex.
ls_gm_header-bill_of_lading = delivery_header-bolnr.
ls_gm_header-gr_gi_slip_no = delivery_header-xabln.
ls_gm_header-pr_uname = sy-uname.
ls_gm_header-ref_doc_no_long = delivery_header-lifex.
ls_gm_header-bill_of_lading_long = delivery_header-bolnr.
lv_gm_code = '01'.
* Füllen der Positionsdaten
LOOP AT selected_delivery_items INTO ls_delivery_item.
    ls_gm_items-material          = ls_delivery_item-matnr.
    ls_gm_items-plant             = ls_delivery_item-werks. "             0001
    ls_gm_items-stge_loc = ls_delivery_item-lgort.
    ls_gm_items-move_type ='101'. "101
    ls_gm_items-entry_qnt                      = ls_delivery_item-lfimg. "          10,000
    ls_gm_items-entry_uom                      = ls_delivery_item-vrkme.
    ls_gm_items-po_number                      = ls_delivery_item-vgbel. "55001582
    ls_gm_items-po_item                        = ls_delivery_item-vgpos. "00010
    ls_gm_items-mvt_ind = 'B'.
    ls_gm_items-expirydate = sy-datum + 30 .
    ls_gm_items-deliv_numb = ls_delivery_item-vbeln.
    ls_gm_items-deliv_item = ls_delivery_item-posnr.
    APPEND ls_gm_items TO lt_gm_items.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header               = ls_gm_header
      goodsmvt_code                 = lv_gm_code
*     testrun                       = 'X'
*   GOODSMVT_REF_EWM              =
   IMPORTING
     goodsmvt_headret              = ls_gm_header_ret
     materialdocument              = lv_mat_docno
     matdocumentyear               = lv_mat_year
    TABLES
      goodsmvt_item                 = lt_gm_items
     goodsmvt_serialnumber         = lt_gm_serial_numbers
      return                        = lt_return
if lt_return is INITIAL.
endif.

Hello Pranav,
the input for the business data is correct.
When performing the goods receipt with Migo it works.
I think the B in the movement indicator is correct, but there might be something wrong with the other data.
Best regards
Michael

Fields mapping IDOC WMMBXY to post Goods Receipt against Inbound Delivery

Hi Friends
I am testing Goods Reciept against Inbound Delivery using Inbound IDOC.
IDOC Type used WMMBXY and Function Module :
System is giving erorr message as "Document does not contain any items".
Kindly let me know segment data mapping for above IDOC type
Following data are passed to segments,
E1MBXYH-BLDAT Document date
E1MBXYH-BUDAT Posting date
E1MBXYH- XBLNR .. in this field i am passing Inbound Delivery number
E1MBXYH- TCODE ... MIGO
E1MBXYI-BEAKZ   ... B Goods Receipt against Purchase Order
E1MBXYI-MATNR     material number
E1MBXYI-WERKS     Plant
E1MBXYI-BWART    Movement Type
E1MBXYI-LIFNR         Vendor code
E1MBXYI-KZBEW      B
E1MBXYI-POSNR      Item number in delivery
E1MBXYI-VBELN       Inbound Delivery number
    E1MBXYJ-VLIEF_AVIS            Inbound Delivery number
    E1MBXYJ-VBELP_AVIS           Item number in Inbound Delivery
    E1MBXYJ-WM_KZBEW            Movement indicator
Raj

Hello,
Did you recieve any answer or find a solution? I encounter a similar issue.
Thanks in advance,
Génia.

Posting goods receipt against Inbound Delivery

Hi,
Our process is creating Purchase order with Confirmation control for Inbound delivery. Then we create a Inbound delivery.
1) After inbound delivery is done we do PGR through VL32N, the system updates the PO history with GR along with the Inbound delivery no. as a reference document against the GR & also the Inbound delivery document flow is updated.
2) But our problem is if we try to do Goods receipt through T-code MIGO against Puchase order or inbound delivery we are not getting reference no. updated in the PO history & also there is no update in the document flow. Also the inbound delivery remais open.
Can you explain why this is happening?
Regards,
Sagar

Hi Sagar,
It is very much possible to do GR using MIGO and document flow will also be updated, you have to do certain config settings for this which is as follows:
in SPRO go to Logistics execution - Shipping - Basic shipping functions - Configure global shipping data - tick document flow update.
Now when you check in Table VBFA you will get the Material Document No. in field VBELN and the status shall aso be updated and inbound delivery will be closed after complete GR.
Hope it solves your problem

Error in post goods receipt of delivery for a cross company return STO

Hi
I created a cross company return STO in ME21N (with returnd indicator). Vendor V001 (DC) and Site F001.
I created a delivery in VL10B. Delivery Type NCR.
I did a Goods Receipt for STO. Movement Type 161. Internally stock in issued from site F001.
I am trying to do a Post Goods Receipt of the Delivery in VL02N and I am getting this error.
Delivery quantity is greater than supplying site stock quantity
Message no. VL900
Supplying site is F001 which has enough stock.
DC has no stock and I amtrying to return stock to DC from store.
How to eradicate this issue?
Thanks and Regards

Hi
http://wiki.sdn.sap.com/wiki/display/B1/SAPBusinessOne...ToGo-3.TheBasicsofFinancial+Accounting
http://help.sap.com/saphelp_sbo88/helpdata/en/45/06b9997d720487e10000000a155369/content.htm
kiran

Goods receipt against outbound delivery

Hello,
Can we create a goods receipt against an outbound delivery document?
The transaction MIGO provides an option but for some reason I am not able to create.
The scenario is the following :
Lets say there are two DCs DC1 and DC2 : both belong to different company codes.
- Outbound delivery created by DC1,then post goods issue
- Goods receipt to be done against the above outbound delivery.
Is it possible?
(I do not want to create a PO for this.)
Regards,
Lisa

Hi Prabhu,
I have been trying to post goods receipt against outbound delivery but here is the error I have been getting :
"Goods receipt not possible for delivery 80000059: error code 4".
Is there any specific reason for this?
Here is the process I have follwed :
-Created outbound deliveries via allocation
-Picking
-Post Goods Issue
- Migo - Goods Receipt.
Regards,
Lisa

Post Goods Receipt

Hi,
To do Post goods receipt against Inbounnd Delivery..i am using Bapi....BAPI_GOODSMVT_CREATE...
The BAPI gives an error for any movement type given...
I have used Movement type 101 that comes directly from the delivery table LIPS
WHAT shud be done...
Vinotha M.
Message was edited by: Vinotha M

Dear all
Bapi BAPI_GOODSMVT_CREATE could be used to post goods receipt against inbound delivery but in consequence no Delivery document flow is updated. This is official SAP explaination.
But there is solution to accomplish it. After posting goods movements you should update Inbound Delivery using fm SD_DELIVERY_UPDATE.
Check following coding:
form process_0112.
clear post_status.
post_status-delivery = wa_likp-vbeln.
* posting
perform post_goodsreceipt     changing post_status.
perform post_delivery_hist    changing post_status.
perform post_transferorder    changing post_status.
* reversal posting if necessary
perform reverse_goodsreceipt changing post_status.
perform reverse_delivery_hist changing post_status.
* display message in case of error
perform issue_message         changing post_status.
* leave transaction
leave to transaction sy-tcode.
endform.                    " process_0112
form post_goodsreceipt changing post_status structure post_status.
* DATA DECLARATION
* material document header
data: begin of it_head.
          include structure bapi2017_gm_head_01.
data: end of it_head.
* T158G special code
data: begin of it_code.
          include structure bapi2017_gm_code.
data: end of it_code.
* material document returned data
data: begin of it_rthead.
          include structure bapi2017_gm_head_ret.
data: end of it_rthead.
* material document items
data: begin of it_pos occurs 100.
          include structure bapi2017_gm_item_create.
data: end of it_pos.
* error table
data: begin of it_errmsg occurs 10.
          include structure bapiret2.
data: end of it_errmsg.
* return data
data: post_mat_doc type bapi2017_gm_head_ret-mat_doc,
        post_doc_year type bapi2017_gm_head_ret-doc_year.
* FILL DATA
* material document header
it_head-pstng_date = sy-datum.
it_head-doc_date    = sy-datum.
it_head-header_txt = 'RF'.
it_head-pr_uname    = sy-uname.
* T158G code
it_code-gm_code     = '01'.
* material document items
loop at it_lips into wa_lips where posnr <> space.
    it_pos-mvt_ind              = 'B'.
    it_pos-deliv_numb_to_search = wa_lips-vbeln.
    it_pos-deliv_item_to_search = wa_lips-posnr.
    it_pos-po_number            = wa_lips-vgbel.
    it_pos-po_item              = wa_lips-vgpos.
    it_pos-move_type            = '985'.
    it_pos-entry_qnt            = wa_lips-rv_lfimg.
    append it_pos.
endloop.
* CALL BAPI
refresh: it_errmsg.
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header             = it_head
      goodsmvt_code               = it_code
    importing
      materialdocument            = post_mat_doc
      matdocumentyear             = post_doc_year
    tables
      goodsmvt_item               = it_pos
      return                      = it_errmsg.
* check result
if post_mat_doc is initial.
    post_status-post_mat_doc = space.
    post_status-post_doc_year = space.
    rollback work.
else.
    post_status-post_mat_doc = post_mat_doc.
    post_status-post_doc_year = post_doc_year.
    commit work and wait.
endif.
endform.                    " post_goodsreceipt
form post_delivery_hist changing post_status structure post_status.
* DATA DECLARATION
data: it_vbfa    like vbfa occurs 0,
        wa_vbfa    like vbfa.
* CHECK IF UPDATE DELIVERY IS ESSENTIAL
check not post_status-post_mat_doc is initial
and   not post_status-post_doc_year is initial.
* POPULATE TABLE
loop at it_lips into wa_lips where posnr <> space.
    clear wa_vbfa.
    wa_vbfa-vbelv = wa_lips-vbeln.
    wa_vbfa-posnv = wa_lips-posnr.
    wa_vbfa-vbeln = post_status-post_mat_doc.
    wa_vbfa-vbtyp_n = 'R'.
    wa_vbfa-vbtyp_v = '7'.
    wa_vbfa-plmin   = '+'.
    select single zeile waers menge dmbtr meins matnr bwart
      from mseg
        into (wa_vbfa-posnn, wa_vbfa-waers,
              wa_vbfa-rfmng, wa_vbfa-rfwrt,
              wa_vbfa-meins, wa_vbfa-matnr,
              wa_vbfa-bwart)
          where mblnr = post_status-post_mat_doc
            and mjahr = post_status-post_doc_year
            and ebeln = wa_lips-vgbel
            and ebelp = wa_lips-vgpos.
    append wa_vbfa to it_vbfa.
endloop.
* UPDATE DELIVERY
data:    begin of yvbfa occurs 0.
             include structure vbfavb.
data:    end of yvbfa.
data:    begin of xvbfa occurs 0.
             include structure vbfavb.
data:    end of xvbfa.
data:    begin of xvttk occurs 0.
             include structure vttkvb.
data:    end of xvttk.
sort it_vbfa by mandt vbelv posnv vbeln posnn vbtyp_n.
loop at it_vbfa into xvbfa.
    xvbfa-rfmng_flt = xvbfa-rfmng.
    xvbfa-updkz = 'I'.
    append xvbfa.
    at end of vbelv.
      call function 'SD_DELIVERY_UPDATE'
           exporting
                i_vbtyp          = '7'
                nicht_sperren    = 'Y'
                no_imseg_refresh = 'X'
           tables
                zxvbfa        = xvbfa
                zyvbfa        = yvbfa
                zxvttk        = xvttk
           exceptions
                others        = 1.
      if sy-subrc <> 0.
        exit.
      endif.
      refresh xvbfa.
    endat.
endloop.
* check result
if sy-subrc <> 0.
    post_status-post_deli_hist = 'R'.
    rollback work.
else.
    post_status-post_deli_hist = 'C'.
    commit work and wait.
endif.
endform.                    " post_delivery_hist

Partial Goods Receipt for Inbound Delivery

Hello Frends,
We have a requirement to generate partial goods receipt against Inbound delivery created in Intercompany scenarios, however when we analzed there two alternative ways possible -
1. Goods Receipt in Inbound Delivery - Transaction VL32N : In this transaction,ssytem allows goods receipt for complete quantity but not for partial quantity
2. Goods Receipt reference to Inbound Delivery - Transaction MIGO : In thsi transaction, there is a provision to generate partial goods receipt however system not updating the status in inbound delivery document.
In this regard, requesting your support on what is possibility to fulfill our requirement, is there any standard SAP approach for this.
Appreciate your support. Thanks
Best Regards,
Goutham

Hi,
Thanks for your quick reply..
I have a outbound delivery with 100 EA, now system automaticallly generates a Inbound delivery for 100EA using output message. Now we need to generate partial goods receipt for the inbound delivery, mean first 20, then 40 and the remaing.
What are the best practices available since when I check from the Inbound delivery,we cannot make partial goods receipt.
Best Regards,
Goutham

Post goods receipt against a Inbound Delivery(VL32N) FM or BAPI Method

Hi Expert,
I am looking for a Function Module or BAPI Method to Confirm the Inbound Delivery i.e. that can post Goods Movement Against a Delivery Document.
My scenario is Create PO-> create Inbound delivery-> post Goods Receipt.
Regards,
Kapil.
Edited by: Kapil Kumar Gupta on May 5, 2011 2:46 PM

In OSS note 520813 it is said:
16. Question:
Which goods movements should I not post using the BAPI_GOODSMVT_CREATE BAPI?
Answer:
You should not post the goods receipt for the inbound delivery using BAPI_GOODSMVT_CREATE BAPI because the document base and the status of the inbound delivery are not updated. See Note 199703.
If you check OSS note 199703 you can see that it is valid from release 45 to release 500.
Assigned to this note you can find another: 1050944 (it's worth of reading!!!).
I feel there are contradictions here - it might possible that the first note (520813) is not updated properly. (As far as I remember in my case this BAPI was working properly too).
In my opinion you should send a message to OSS and ask them whether the statement in note 520813 is still valid or not - you should also tell them that the referred note (199703) is not applicable to ECC6.0.
(there's a setting in ECC6.0 which enables that document flow is updated if GR is posted via MIGO with reference to IBD - V_TVSHP-SPE_INB_VL_MM)
I would like to ask you if you have a reply from them, please update this thread - it may be helpful for us.
Edited by: Csaba Szommer on May 9, 2011 2:34 PM
One more remark: (based on OSS note 1050944) it seems that you cannot use it only in case of packing (IBD with HU).
Edited by: Csaba Szommer on May 9, 2011 3:05 PM

Inboud delivery creation and post goods receipt via idoc at same time

Hi
Does anybody knows if there is in idoc message/basic type that can create in one single step the inbound delivery for a purchase order and do the post goods receipt (on the inbound delivery)? Warehouse is not setup.
KR
Jimmy

Hi All,
Solved by myself.
As expected , same code has been called for ob delivery and Ib delivery .
Solution : Have called fm in background task .
Thanks & Regards,
Vinod.
Knowledge has to be shared nt 2 accumulate .

Posting Goods Receipt PO partial delivery

Similar Messages

Maybe you are looking for