Posting Key for Credit memo need to change

We are haveing cr 1 and dr 50 posting key for Customer invoice,
for credit memot also same. when we create Credit memo it addsup into revenue which is wrong.
WE need to change posting key for Credit memo(G2 doc type)
please provide Tcode /path for it
Thanks in advance,
-Sam

Hi SAM,
1.Tcode: OB41 for configuring posting key
2. IMG --> Sales and Distribution --> Basic Functions --> Account Assignment -> Revenue Account determination -->
Define and Assign Account Keys.
Reward if useful.
Regards
JACK

Similar Messages

Manual AP Credit Memo- Need to change Withholind tax Liable to YES

Hi ALL
We created Manual AP Invoice for a supplier ( Service Type) and there should be a witholding tax involve.
When we tried to change the withholding tax from NO to YES, we cannot seem to edit the Field.
We already check the Business partner Master data. The BP we use has a default wihlding tax already.
We already closed SAP B1 and record the same transaction hoping that we need to refreash the set up before we can edit the Wiholding tax from NO to YES
Can anyone tell me if we can change the Withholding tax liable field from NO to YES if we create manual AP Credit Memo? Is yes how?
We are currently using 2005B PL 43
Regards,
Amy

Hi,
Following points may be helpful regarding your issue :
>A credit memo which is not based on an invoice is not liable to WT.
>In a credit memo which is based on an invoice, the WT amounts will be taken from the invoice.
>You can change the WT amount in the Credit Memo only if the invoice is not closed or parially closed.
>You cannot choose a WT code that is not related to the invoice.
>In addition, the WT amount cannot be higher than the WT amount in the invoice.
Hope it helps.
Kind Regards,
Jitin
SAP Business One Forum Team

Where to change posting key for Document type RG?

Hi ,
May I know where is IMG path to change posting key for Document type RG?
Thanks.

Hi,
Posting key is not assigned to the document types.
Posting key can be assigned to a particular trnsaction event etc., for example in OB40 for each transaction key in tax area, you can ddefine the posting key for bedit and credit.
However you have the option to create a validation to check that this particular document type is allowed to be posted with certain posting keys. Validation can be created in OB28, GGB0. The details are available in SDN. Please search that.
Regards,
Gaurav

Open sales order value for credit check need to be changed (S066)

Hi all,
I need to change open sales order value which is already there in S066 table.
Previously we had used open order value for credit check. Open order values are already updated in the S066 table.
Now we dont want to consider open order value for credit check (which is already included in the credit exposure field in FD32).
When we create sales order system is taking old open order value for credit. Now i have changed not to update open order value for credit check. Now its not updating open order value. But my issue is how to change existing or (previous) open order value for credit?
Can i change S066 table data directly to '0'. Is it advisable to chage open order value directly from this table?
Please advise me.
Regards,
Babu
Edited by: babs on May 19, 2010 4:26 PM

Hi Babs,
If you doesn't want to reflect the open order value in the structure for this order value ,If the order is not processed kindly delete the line items and the order. Then save the document. Then try to see the structure S066.. This will be modified.
If you want to modify the value then follow the below process.
Otherwise delete the line item in the order and change the pricing date and the document date. Re enter the line item again so that it will take it up the new changes.
I hope it will help.
Regards,
SK

What is posting key for debit note and credit note?

Hi Gurus,
May I know what is posting key for debit and credit note?
My current sales debit and credit note having same posting key. Where can I set this posting key?
Sales debit note                dt      cr
Sales credit note               dt      cr
Customer debit note          dt      cr
Customer credit note         dt      cr
Vendor debit note             dt      cr
Vendor credit note            dt      cr
Thanks
Moderator: Please, avoid asking basic questions. Try to search available SAP material first

This depends on requirement.
Generally, SAP std are followed and ought to be followed, as Std config are based on best practices world over.
Still, if you business process requires then take an example,
- use TCode OBYC,
- double click on transaction BSD - Inventory posting
- provide chart of account, if asked.
- check the posting keys for transaction by clicking Posting Key button on the Maintain FI Configuration: Automatic Posting - Accounts screen.
In Debit
89 - Stock inwrd movement
In Credit
99 - Stock outwd movement
Thanks & Regards
JP

Need API for Credit Memo creation-R12

Hi All,
I am working on R12 Implementation process. I have a requirement for creating the "Credit Memo" using API.
Could you please any one provide the API for Credit Memo creation process.
Thanks,
LSP

Hi,
Please refer the following links:
http://www.betteroracle.com/2012/08/ar-api-create-credit-memo-r12.html
http://easyoracleapps.blogspot.com/2011/08/creating-credit-memos-and-appling-these.html
http://prasanthapps.blogspot.com/2011/05/credit-memo-creation-via-api.html
Googling will help you indeed
Rgds,

Problem while doing invoice for Credit memo request

Hi all
I very well known that Out boud Delivery is not needed for Credit memo request but after saving the CMR and when i raise the Credit Memo (VF01) system is showing a error message saying "PGI not done for Outbound Delivery 30047402"
In CMR document type i have set the order related billing and i have removed the billing block also
I have raised the CMR based on Invoice
Kindly help me in this regard
Regards
BMS

Hi Raj Aryan Malhotra, Thanks for ur reply
The setting which u said are already there
The second one that is, change the copying requirement of header to 11. i did this but this time the message was different "The document is not relevant for billing" . After checking the log i could the follwoing info
Client                                                   240
Group Number
Sales Document Number
Item Number of the SD Document         000000
Schedule Line Number                         0016
Counter in Control Tables                     00
Message Identification                         VF
System Message Number                    016
Output Type                                        I
Message Variable 01
Message Variable 02
Message Variable 03
Message Variable 04
Group Type                                         F
Kindly help me to resolve this also
Regards
BMS

Asset value for Credit memo

Hi Experts,
I'm new to this forum, Need some help on how the Ordinary depreciation calculated for credit memo.
It is Valuated Goods receipt, asset capitalized before the IR. However, there was a difference in value between GR/IR and the different value automatically got adjusted in APC transaction and also credit memo passed for the difference.
My question here is credit memo value is 2.46 but corresponding depreciation value is 22.14.
Note: It's a Low value asset, useful life is 1 Month. Entire depreciation already posted for GR Value which means more than APC value.
GR value           : 1192.20 -----
APC value         : 1189.74------
Ordinary dep     :   1192.20---
(posted value)
Thanks,

Hi Mukthar,
Thanks for your reply.
However, the credit memo value is only 2.46 USD, depreciation getting reversed each month 2.46 USD and total depreciation reversal value is 22.14 (USD).
Just want to understand the logic behind it.
Thanks,

DUE DATE FOR CREDIT MEMO

Hello,
I have a question about credit memo -due date.
Using MIR7, MIRO for credit memo the due date for net payment is the same with baseline date.
e.g. document date:18/07/2007
posting date:18/07/2007
baseline date:18/07/2007 terms of payment are 30 days
the system issue due date : 18/07/2007 but correct is 18/08/2007
What can I do to calculate due date correct for credit memo ? (baseline date + terms of payment) ?
Thanks.

Hello
Check the settings in "Terms of Payment"
Check what you have checked in "base line date calculation', I think you need to enter 1 in the box additional months.
Next in the default date setting, check if you ticked "posting date "
Reg
*assign points if useful

Posting key for payment documents with sales related check

Hi,
sometime during 2010 posting key for posting cusotmer payments was changed in other attibutes to sales related. a correction has been made to the posting key but now I need to correct all the documents in BSEG field XUMSW and remove the sales related check.
does anyone know of a way or a program that will do this?
your help is greatly appreciated.
CM

Hi,
You cannot change XUMSW (sales related item) in OB32.Here most of the fields are there for changeble option.but for your case it is not applicable.
It means you cant change that field.
If you want really modify it for certain documents you need to writ Query to change in table level.
Normal BDC and LSMW will not work.
Thanks
ANJI REDDY

How add EMPST for Credit memo with segment E1EDP01_IDOC

Hi experts,
Do you have any ideas for add data in EMPST for segment E1EDP01 (receiving point, in Shipping view) for credit memo ?
I can add this data for standard order but not for credit memo..
My segment E1EDP01 (exemple of WE19) :
If i try to create an credit memo with these data that doesnt add value for EMPST in my order. But if i change the type of document for an standard order that's work and add the value for EMPST ( i change type of document in E1EDK14).
I haven't any ideas for add EMPST for credit memo, did you have ideas ?
Thank's a lot.
Umti

Hi
while creating credit memo
in item level enter the material number and material type or g/l account number if you want to post such costs.
hope it helps

Regarding rate, sales tax and discounts for credit memo request and returns

Dear ALL,
Rate column is not displaying for credit memo request. suppose credit memo should be given due price diifererence
with referance to billing documnet credit memo request to rised. but if i want to edit rate column is not available.
how vat and discount has to be captured in case of rate diifferance for credit memo.
In case of returns will taxes applicable for returns credit memo
Gl accounts for credit memo same as billing or different GL accounts to be maintained or not
client has the scenario that if credit memo request has been rised for with referance to billing due to rate differance.
If customer returns materilas belongs to same billing. so based on the returns order returns credit memo to be rised .
But how the sap captures exact price of the materila during returns. ie; price modified during credit memo request.
Thanks & Regards
ramesh

HI,
Remove all the other condition types from the procedure and keep only those which you need.
Regards
Abhilash

Tables for credit Memo and Purchase order

Hi all,
I need to develop a report to dispaly all the credit memos for the open qty,
My issue that is there any table where we can have information for credit memos and purchase order,
like the input fields is company code,customer number,fiscal year,
hope you understnad,
Please let me know if you need any more information,
Thanks&Regards,
Cghand

Hi
Invoice Verific. table:
RBKP - Document Header: Invoice Receipt
RSEG - Document Item: Incoming Invoice
Regards
Prasanna

BOM explosion for credit memo req,free of charge,returns order types

Hi Gurus,
My client has the following requirement.Sales BOM with header pricing has to be configured for standard order, free of charge, credit memo req, debit memo req, returs order types. I have configured the BOM for standard order(ZOR) successfully, but for credit memo request and other orders its not picking correctly.The component items for the BOM structure is repeating twice.Pleae let me know how to maintain item category determination for credit memo request and other order types.
For credit memo req I have created new item category by copying the G2N and updated the structure scope as A and application SD01.so the new item category is ZG2B and I have maintained the below mentioned determination.
ZCR ERLA ZG2B
ZCR ERLA ZG2B G2N
ZCR NORM ZG2B G2N
Regards,
Hari Challa.

Hi,
That is incorrect.
For sales order, you shoudl have used item category groups as ERLA, LUMF respectively. The resultant item categories will be TAP/TAQ etc. The same kind of configuration should be enabled for Credit memos and others also.
There the item category group will be ERLA, or LUMF
The document type will be CR / RE etc based on the process
Now the resultant item category should be TAP/TAQ or you can even have RENN etc but the property of this IC should be same as TAP/TAQ based on what you are expecting, apart from the standard configurations of a return process. If you do this, then your pricing and items will come up properly.
In specific, you have to look at the BOM configuration of the Item category in the BOM area.
If you need any detail, pls let us know.

How to post parked vendor credit memo after clearing that invoice

Hai
I had an issue where the user is trying to post the parked credit memo and he is getting the error. I had investigated that and found there for that vendor already Invoice amount already paid. After making the payment to vendor with respect to Invoice is it possible to post the parked credit memo for that vendor.In this case the vendor acount balance is zero. Kindly let me know how to post that parked credit memo to that vendor. Is it possible or not if its so how?
I appreciate the early response.
Akash Narayana

Hai Ashok
The vendor parked credit memo has posted with referece to PO. And that invoice has been cleared. Currently the Vendor is sitting with the zero balance. Now when the user want to post the parked vedor credit memo it is not allowing.
Kindly anyone can help. Its Urgent.
Regards,
Akash Narayana

Posting Key for Credit memo need to change

Similar Messages

Maybe you are looking for