Posting message to a third party System

Hi All
I m working on a scenario where I m using the R/3 system as the sender and using Idoc as the message type. The receiver system wants to hide its technical system details and hence I m unable to create a technical system for the same in SLD. What can I do for the same??\
How can I post the message to the receiver??? I heard that we can do so using RFC destination but I m not sure about that.
Regards
Amit

Amit,
You can create a Business Service in the Integration Directory and then add the Inbound Interface to this business service and use this as the Receiver System.
Regards
Bhavesh

Similar Messages

How to receive receipt in third-party system?

I want to send message from third-party system via HTTP-adapter and
integration server to SAP MDM. I have created outbound interface for my
third-party system, message for this system, message mapping between my
messageand ABABusinessPartner, scenario for transporting business
partner data between message interface of third-party system and MDM
interface ABABusinessPartnerIn.
On third-party system side I have developed function which sends XML-
message via HTTP protocol to SAP XI integration server (to HTTP-
adapter). I want to receive delivery acknowledgement in synchronous
mode (in same HTTP session). I want have delivery result
(delivered/undelivered) in my third-party system.
Because ABABusinessPartnerIn is a asynchronous interface then I can't
use HTTP synchronous mode (parameter &qos=BE).
Whether I should use the sync/async gateway?
Message was edited by: Eugeny Balakhonov

You can see the stocks with mvement type 101-O for that material

Howto Send IDOC to third-party system. programID can not be registered.

Hi, guys.
I want to post IDOC to a third-party system through XI. And for sure, the third-party system can receive IDOC.
In the receiver communication channel, I would fill in the RFC Destination with a RFC connection defined in SM59.
In SM59, it is a tcp/ip connection and in technical settings the activation type is Registered Server Program. I name the Program ID randomly with 'a.a'. In Gateway Options, I fill the host with XI server and service with sapgw01.
Then I test the connection, the result is program a.a not registered on XI server.
My question is how to register the progam when I want to use this RFC to send IDOC to the third-party system. And how the RFC know which system he would connect. I don't find anyplace with the connection information such as IP or something like this.

Sergio Cipolla
Thank you for your material. I have read the doc you refered.
Almost I understand the process, there is one part.
I should register the program ID in saprfc.ini file with the following content:
DEST=FROMXI
TYPE=R
GWHOST=saphost
GWSERV=sapgateway
PROGID=a.a
Here I am wondering the fiield "DEST" represent for. Does it mean the hostname of the target external system?
And Here is the UNIX system, what is the path location of the file saprfc.ini or where I should put this file to be effective.
Thanks in advance.
Bu Ju

Handling Rowset based message in third party systems

Dear All,
Could you please help me to understand, how can we handle a row set based message at third party system?
PeopleSoft will be sending a row set based messages to third party system and in turn it will be expecting a row set based message as a response. How do we need to handle this?
Thanks,
Hari.A

So you are creating an inbound sync service operation routing.
This can be very well a rowset based message for the request as the response, since every message is an XML.
3e party system will be sending an XML which in the rowset format (which is still XML).
You can just take the message and read it in a rowset, process it and create a response message based on a rowset.
3e party system will be receiving an XML which in the rowset format (which is still XML).
The reason wy I mention XSLT is that the rowset based message has a lot of overhead noded which is not relevent for 3e party systems, but needed for PeopleSoft.
See example:
method OnRequest
   /+ &MSG as Message +/
   /+ Returns Message +/
   Local Message &response;
   &response = CreateMessage(Operation.SYNC_REMOTE,
   %IntBroker_Response);
   &response.GetRowset().GetRow(1).GetRecord(Record.QE_FLIGHTDATA).
   GetField (Field.DESCRLONG).Value = &MSG.GenXMLString();
   Return &response;
end-method;

Adding Third Party system in PI SLD

Hello Experts,
I new to PI and would like to know, how to add any Third part system in the SLD, and
scenario where sender is ABAP Proxy and receiver is Third party system, via SOAP Adapter.
Regards,
Abhishek

hi,
How do i maintain the entries for all the component in SLD. -> generally we dont have authorizations to create Business system,products in sld.
if you have, then follow what was i posted earlier link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50924080-0627-2a10-2b89-8cb87b972fb1?QuickLink=index&overridelayout=true
any information on IDOC to SOAP Scenario.
In R3 :
1.Craete Logical system for R3 say SAPR3
2.assign client to this LS.
3.Create Logical system for XI say SAPXI
4.create RFC pointing to XI say R3_To_XI
5.Crate port of type Transactional RFC say PORT_To_XI.... give RFC created in step 4.
5.Create Partner Profile of type LS.
Give Partner no as SAPXI (LS of XI created in step 3)
In outbound parameters add ur Message type
Double click on message type & give Port PORT_TO_XI created in step 5.
6.Create Distribution Model..... Transaction BD64
In XI
SM59 - R3 connection pointing to R3
IDX1 - define the port with the above dest.
in ESR:
import Idoc and create everthing based on your requirement.
please refer below threads:
IDOC to SOAP scenario
IDOC to websevice (SOAP) scenario
thanks,

Commitment Interface from SAP to third party system!

When we created Purchase Requisition or Purchase Order, the commitment will be created. The third party system needs to track the commitment. So SAP needs to send the commitment to the third party system by this interface.
But when the Goods have been delivered, the commitment will be zero out and the actual will be posted to SAP. SAP needs to send the offsetting records to the third party system. In this way, the third party systems knows that how much commitments have been reduced.
My problem is that I cannot find the right table to record the offsetting entry. In the table COSP, I can identify the commitment by the Business Transaction -- RMBA and RMBE. But it did not record the offsetting entry. It just becomes zero when the goods have been delivered. But I have nothing from that table to send to the third party system.
Does anyone meet this problem before? Can you share some experience on this?
Thanks

Hi ,
As pointed ...above you can for a file to file scenario you can create just the Business service in integration Directory and create two file communication channels for sender and reciever under it.
However if it was file to idoc or file to rfc ..
then you need create ts web as abap ..identifying your R/3 system
System Name: <you can give a 3 character id here of r/3 system ...i.e like IDS>
System Home : <can be found in status of R/3 system>
Installtion Number : In transaction Slicense in R/3
Host Name : Same as System home can be specified.
Message Server: <3600+instance Number can be found in the log pad to the r/3 system itself >
associate a bussiness system with this ...create a product and a software component version ...In swcv in respository ..develop your object under it ...
Import this business system in Configuration ..and create your communication chanel under it.
Regards ,
Deepak

Connect Report output to third party system

Dear Techis
Can we connect Report output to third party system and hw?
Pls advice............

Hi Yong,
Yes that's possible. You can use the web interface to configure logging category messages so that they are sent to remote syslog server targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052741
ACS provides these preconfigured global ACS logging categories, to which you can assign log targets.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/logging.html#wp1052549
Configuring Per-Instance Remote Syslog Targets
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/admin_config.html#wp1063768
Jatin Katyal
- Do rate helpful posts -

EREC: Interfaces with Third Party Systems

Hello Experts,
Does anybody can provide me a list of third party systems with seamless interface with E-Recruiting (SAP Partner) for the following purposes below:
Resume Parsing
Background Check
Drug Screening
Posting in Multiple Job Boards
Thanks in advance!
Sivani

Resume mirror is used for resume parsing.
Regards,
Bharat

File Adapter and Third party system

Hi,
I am new to XI and implementing a simple scenario.
In SLD- I have 3rd paty software component and product.
3rd party technical system: using my pc - For host name I am using my machine name.
Scenario: Using file adapter transform csv file to xml.
File resides on my machine. I have configured file adapter inbound and outbound. Integration Dir & Rep objects are all activated.
But nothing happens, cannot see any message in Messgae monitoring..
Any help would be great.. Is my technical system setup wrong?
thanks

chk whether the folder in your m/c where the CSV file resides is shared and has appropriate access. Also you need to specify your m/c IP with fwd slashes, e.g) //<Ipaddress>/foldername
configuring your m/c as a Third Party system in SLD is fine.
If you think ur SLD settings are not correct, you can define your file adapter commn. channel in a Business Service(which does not require an SLD entry) and check whether it works.
Thanks
Saravana

Production order to third Party system

Hi Gurus,
I have requirement to transfer production orders created or changed in SAP system to third party system ? Can you please let me know, how it can be achieved ? ( Using IDOC or BAPI ). Any inputs appreciated, am not sure how message control can be used in SAP 4.7 for production orders.
Thanks,
Man

Check this doc...Copy and paste it in explorer
help.sap.com/bestpractices/BBLibrary/Documentation/J72_BPP_EN_ZH.doc
Regards,
Pavan

Rollback work in third party system thru RFC

Hi Gurus,
Here is my scenario:
I am using RFC_UPDATE_TAXES_DOC to update records in third party system.
After successful updation only , I am calling BAPI_ACC_GL_POSTING_POST to post records into SAP.
Suppose I could post Taxes successfully into third party through RFC, but my BAPI gave me some error, I need to revert back the updation done in third party system as well.
Could you please suggest me an RFC which could do this or guide me with some pointers on how to achieve this.
Many Thanks,
Madan

Hi Primini,
couple of stupid-but-necessary questions:
1) have you imported the RFC model in PI Repository?
You don't need to have the RFC metadata in PI ABAP stack (there is no point in doing that), but rather in the PI Repository/ESR, within the SWCV you've created.
Check the "Activities" session of this link for more details:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
2) if you have done 1), have you configured the RFC Sender scenario properly?
I mean, have you ran the configuration wizard to create the agreements & determinations, setting the RFC interface as both the sender and the receiver interface? Of course, the systems would be different: as the sender system, you'll have a Business Service representing the legacy/JCo system; as the receiver, you'll have the ERP Business System.
This should make your scenario work.
If it doesn't, try one more thing: in the JCo code, just for the metadata repository connection, use a connection to the ERP system. But for the actual call, use the PI system.
Let us know the results.
Best regards,
Henrique.

IDoc Scenario SAP ERP - PI(Receiver IDoc Adapter) - IDoc to Third-Party system

Dear All,
I have created a scenario to send IDocs via PI system (PI 7.1) to a third party system.
There is no message mapping involved(Only ID part)
I have imported Idoc Metadata from the source ERP system.
Created an RFC destination(BC_ERP_SEA) in the PI system of type TCP/IP with registered Server Program to third party system.(Tested success)
Created a port in IDX1 BC_ERP_SEA with above TCP/IP destination.
Receiver communication channel of type IDoc is created with the following parameters:
         RFC Destination: BC_ERP_SEA
         Segment Version: 640
         Interface Version: SAP release 4.0 or Higher
         Port: BC_ERP_SEA
         SAP Release: 640
Now when I execute the scenario, I get the following error in SM58 of PI system.
Bena IDOC_INBOUND_ASYNCHRONOUS not found on host.
Request your help for this issue.
Thanks,
Jishi

Hi,
Check below steps..it may resolve your issue
1. It is mandatory to specify Ack Destination value in IDoc_AAE sender channel. The value should be an RFC destination name which is connecting to your SAP ECC system.
2. In inboundRA resource adapter, the value for the property "local" should be set to "true".
Regards,
Tulasiram.

Scenario: R/3 - XI - Third Party System: Manage queues

Hi to all,
my scenario is: an R/3 system which extract some datas -> XI -> datas are used in a third party system. In R/3 system I did a custom program which extracts datas and send them to abap proxy, this program is used by a key user who can execute it more times quickly, and I'd like put these executions in queues so that they are precessed one after one. Is this possible? Is there a function module in R/3 system to manage queues for my purpose?
Thank you very much and sorry for my english...
Antonio

you can enable EOIO in your abap proxy. That should help.
ref: /people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies

Response message back to Third party vendor webservices

Third party vendor sends messages to a webservice. The SOA application takes the message and puts it into a JMS topic through a mediator with asynchronous interface. All good so far, the system now needs to send a response back to the third party's webservice saying the message processing failed or was successful. For mediator, there are two concepts callback and response. What is the difference between callback and reponse. Which one should I use to send response message back to third party. Do I need OSB for this?
Please suggest the approach for getting this implemented. I am fairly fresh to the SOA components and appreciate help in this regard. I hope I am making sense, if not feel free for more clarification. I am struck on this for atleast a week now.
Thanks

I am using the mediator component which does callback and response as per the SOA user guide. I am not sure, while sending response back to third party, should I be using callback or response. There are no use cases for asychronous interaction using jms topics in Oracle samples examples also.
Looking forward for some help or suggestions
Thanks

ECC Via XI to Third Party system through Idocs

Hello,
I have done all the setting required to IDOC communication,
RFC's are created,
Distribution Model
Imported the Meta data
Partner Profile
ESR Objects Made (IDoc as my Source and WSDL as External Definition for Target)
ID Configuration made, sender channel is SOAP.
SLD Configuration (Business and technical system as third party systems and ECC as ABAP system)
Sender is ECC, no sender channel will be required (correct me if i am wrong), where as
now when i test my scenario with WE19, i do not see my XML while using tcode sxi_monitor.
have i missed any step.
Any help will be appreciated,
Regards,
Abhishek

in IDX5 System is not a Central Integration System: unable to start program is the error, if i fix this error what will be impacts on the system
please follw bwlow step:
Check SXMB_ADM --> Check the Integration Engine Configuration
In the Global Configuration Data :
Role of Business System should be Integration server
Corresponding IS should point to Pipeline URL.
please check below link
Configure Role of Business System " as Central Integration Server , PI
and
Transaction SAP Adapter u2013 Monitoring (IDX5) : provides you with an overview of all messages sent to or from the Integration Server as IDocs. Double-clicking a message provides you with detailed information on this message in the Integration Server.
You can monitor the status of all XML messages by using transaction Integration Engine u2013 Monitoring (SXMB_MONI).
You can use transaction SM58 to monitor native RFC communication on the Integration Server. This type of communication protocol is used in two places here:
To send an IDoc from an SAP system to the Integration Server
To send an IDoc from the Integration Server to an SAP system
and one more thing are you tested Rfc destination ? is it working ?

Posting message to a third party System

Similar Messages

Maybe you are looking for