Posting of Loan - Payment and recovery from Employees

Dear All,
We have done the configuration for Loans. Its working fine.
Now we want to post the amount to FI to the concerned Employees Account to track the payment and recovery..
How do we do this... What are the steps, process, configurations??
Pls let me know how to do the posting for the Loan amounts for payment and recovery.
Thanks and Regards,
Revathi.

did u check the account assigment feature for that wage types in V_T52EK it shd be Q
not sure check once ..........

Similar Messages

X61s - unable to access Rescue and Recovery from boot

Is there any other way to access the R&R from boot? and what's the unattend answer file anyway?
I'm trying to go to rescue and recovery from boot because my windows wouldn't load.
It shows this message: "Windows could not parse or process unattend answer file [C:Windows\Panther]unattend.xml]. The answer file is invalid"
I want to reinstall windows anyway so I tried going to the R and R page from boot: pressing the Thinkvantage button when it say "to interrupt normal setup... etc." I pressed the button and the message disappears, but it doesn't lead to the R & R page, it just starts windows normally. F8 leads only to more options of loading windows, like safe mode, etc. but non of them works because of the "unattend answer" file.
How do I go to R&R if not through the thinkvantage button?
What is unatend answer file anyway?

Hi,
RnR is not located in %programfiles%\ThinkVantage
RnR is located in : %programfiles%\Lenovo\
What is the way, how you want to do the backup? Using a rrcmd file or using the basic RnR GUI ?
Rgrds

Lenovo N200 and Recovery from CD

Hello !
Im new here and english is not my language so plz forgive me any mistakes or putting topic in wrong place.
I have problem with doing Recovery on Lenovo N200. Problem is when i do recovery from CD, i can't turn off some useless apps for me. I don't want to install Symantec's and Office tryouts and staff from Lenovo. I'd like to get clear Windows. However, i can turn off these apps. I CAN turn off apps when doing recovery from hidden partition.
But that model im working with has hidden partition delated. What to do? Uninstalling that software after is rather not good way to keep Windows clean.
Message Edited by Kreton on 09-23-2008 10:37 AM

It sounds as though you're on the way to recovering your system
When it's finished, I suggest you install ThinkVantage System Update to get your drivers up to date, you'll need .NET framework as explained on the site.
Just in case info. - If, as somtimes happens, it can't install because a previous version of IBM's Software Installer is installed which it can't seem to uninstall, and which also doesn't appear in Control Panel > Software, go to C:\IBMTOOLS\APPS\UPDATER and run the setup.exe this will give you the option to uninstall.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Backup and Recovery from Archive Log

Dear all,
I implemented hot backup with oracle9i and
Can anybody suggest me how to backup and recovery archive log ?
Thanks for advance.
Chara

assuming you are using RMAN for backup -
backup ( archivelog all );
backup ( archivelog all delete input ); - to delete from file system.
If you are not using RMAN but backup using a script which puts the tablespaces in hot backup mode then you just need to backup archive log directory.
The archive logs are required when you need to do a database recovery. You don't recover archive log files.
rgds

HT3702 How do I stop a payment and delete from I tunes

how do i stop a payment and delete payment for the future. Also stop current payment.

Stop and delete a payment for what, a song, pre-order, auto-renewing subscription, iTunes match ... ?
If an auto-renewing subscription then there are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098
iTunes Match : http://support.apple.com/kb/HT4914

Backup and recovery from an external hard-drive to another

Hi sirs/madams,
I have two external hard drives and one of them is acting really weird, lagging and it became so very very slow compared to before.
So I want to back everything up in it into the other external hard drive, I wanted to used the Disk Utility but got scared, didn't want to play with it and then lose all the work of two years.
So the question here is how to backup all the data from hard drive 1 to hard drive 2 and then recover the data back from hard drive 2 to hard drive 1?
Thanks in advance.

sara-alain wrote:
You're kidding, right?
1.2 TB of data will take nearly 10 bloody hours to be moved into another HDD.
Please give me a professional solution
A 'professional' solution? All retina MBPs have Thunderbolt capability so use that to transfer data. It will reduce transfer time by 50% or more depending upon what protocol you are using. If your MBP has Thunderbolt 2, the transfer times will be twice as fast as 'plain' Thunderbolt.
Ciao.

Is there any standard report available to view the loan payments for the FY

Hi Experts...
Is there any standard report to view the loan payments taken by the employees in a paticular financial year.
We are entering the details of loans through 0045 and through a subtype.
When im using tcode pcoo_m99_cwtr...
thet are showing up details with out employee number.
How we cn get the details of amount recoverd/deducted from employee salary of a particular employee in the financial year.
Regards,
VSai.

hi
check the std transaction:-
pc00_m40_lon1 (this is for india specific)
Regards
sameer

OFFLINE datafile and Recovery

Gurus,
on 10Gr2, db is in archivelog mode, when I take empty datafile OFFLINE,
then at some point in the future(full backups were performed regurarly) I need to perform
recovery from last full backup, but archive log from the datafile OFFLINE operation way back is not available, I am not able to perform restore and recovery from full backup because of that OFFLINE datafile which needs to be recovered(why? it is offline). Is there any way to restore from the full backup and open the instance? Seems like the SET UNTIL scn/seq doesn't work either.
Thank you
D.

Daniel
I meant to ask you whether you used offline for drop or just offline command. Your posting answered my question.
Error message says that it can not identify datafile, which means it can't find datafile for restore, either from control file or from recovery catalog depending upon what you use.
I still don't understand issue here. Making a datafile offline should not prevent you from recovering it or restoring it.
Are you using rman to restore ? Are you doing full database restore ? Is the restore throwing this error ? or Is the recovery throwing this error ? During backup did you use any skip option ? Sorry for numerous questions, but trying to understand the issue clearly.
Do you have the offlined file in the file system ? If yes, you could just alter it to be online. That file shouldn't need recovery if the full backup was taken after the file was taken offline.
Thanks
Riyaj

Rescue and Recovery 4.0 on t43: can't access rescued files in Windows

Strange issue. My hard drive had a serious problem and I had to replace it. Before I did, I ran a rescue files operation, which apparently completed successfully. The problem is, my Documents and Settings folder does not appear in Windows or in DOS. If I run rescue and recovery from the USB recovery media, I can see the folders and all the files in Documents and Settings, and even open some of them using the internal browser. But when I start windows and open the hard drive, all of the other files (Windows, Program files etc) and folders are there, but Documents and Settings is not visible. Ditto for browsing using the command prompt. Really strange. As of now, I cannot recover my documents to my new hard drive. What should I do?

I had this same problem with my rescued Music folder in Vista SP1. Just figured it out!
Go into "Folder Options" in the Control Panel in XP or Vista (should be the same. Use Classic View) and uncheck "Hide Protected Operating System Files". This shows System files and folders.
Head to wherever you rescued those elusive files to.
Since I rescued the Music folder to my USB external drive, the folder F:/Users/Music so on and so forth, is now visible. The simplest way to get these files onto your desktop, Documents, etc (since you can't make them not hidden), is to simply copy the entire folder.
I suggest heading back to Folder Options and checking "Hide Protected Operating System Files" again. Don't want to accidentally delete something you don't want to!
Problem solved! I hope this helps! I just finished copying the files as i wrote this, and can confirm it works for me. Let me know how it goes for you!
Ryan
update: You will need to keep the "Hide Protected Operating System Files" unchecked until you have finished working with the files. To change the files/folders to "not hidden" check out this post: http://www.winvistaclub.com/forum/windows-vista-tips-tutorials/20554-create-super-hidden-system-fold...
You can only go one file/folder at a time. But for ALL 3,000+ music files in F:\Users\Ryan\Music\iTunes.... I only had to unhide Users, Ryan, and Music so it wasn't so bad.
Message Edited by manunited518 on 12-24-2008 09:22 PM

Problem with the "lenovo Rescue And Recovery" system. (lenovo 3000 N500).

hi!
yesterday i ran Kaspersky virus scan tool and it detect file named "tvtfilter.sys" as suspicious file and thefore delet it.
today when i was restart my laptop, i got error message on startup that say:
Microsoft Visual C++ Runtime Library Runtime Error! "C:\Program Files\Lenovo\Rescue and Recovery\rrservice.exe" abnormal program termination.
after some google search i've understand that "tvtfilter.sys" was critical file of "Rescue And Recovery" system.
so, any one with "Rescue And Recovery" running on his laptop can upload for me this file?
it's located in "C:\WINDOWS\SYSTEM32\DIRVERS\" and it's name is "tvtfilter.sys"
thank you!
BTW, ive tried to re-install it but it wont let me because of some error message

Hi eitrnel,
Just a thought: give a try to un-intsall the Rescue and Recovery from the Control Panel first before re-installing it.
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

ThinkVantage button startup behavior changes after Rescue and Recovery

I recently bought a Thinkpad X301 (2777-CTO). When booting my computer, I see the following message: "To interrupt normal startup, press the blue ThinkVantage button". Initially, when I press this ThinkVantage button on startup, I get a "Startup Interrupt Menu", pictured at http://img90.imageshack.us/img90/4773/startupinterruptmenu.png
This menu is useful since it allows me to either enter the BIOS, start Rescue and Recovery, select a device to boot from, or simply start normally. However, after choosing the Rescue and Recovery option once, this menu no longer appears. Instead, it goes straight to Rescue and Recovery from there on without giving me the choice to enter the BIOS configuration or select a boot device.
I find this new behavior problematic for a few reasons:
- The behavior of the ThinkVantage button at startup is inconsistent (a menu that should appear no longer does after running Rescue and Recovery once).
- There appears to be no straight-forward way of reverting back to the desired (original) behavior.
- The initial prompt on the power-on splash screen is now misleading. Although it still says "To interrupt normal startup, press the blue ThinkVantage button"; the way the button acts, it would probably be more accurate to say "To start Rescue and Recovery, press the blue ThinkVantage button" instead.
- This behavior breaks the "Option Keys Display" option in the BIOS setup. Although I enabled this option, which should cause the system to display which key does what (e.g., F1 for BIOS), this is not displayed.
- Running Rescue and Recovery results in a loss of functionality (instead of simply restoring the system to the initial state).
- And anytime I press the blue ThinkVantage button (as instructed) instead of F1 or F12, I end up wasting several minutes, waiting for Rescue and Recovery to finish booting before I can properly shut it down and try again.
This problem appears to have existed for a long time (since 2008; http://forum.notebookreview.com/lenovo-ibm/241845-thinkvantage-boot-menu-boots-straight-into-rescue-... ). However, the only "solution" that I have found is just a workaround: avoid pressing the ThinkVantage button (as instructed by the power-on splash screen).
The ideal solution would be to have a BIOS (or Rescue and Recovery) update which will prevent the ThinkVantage button from losing its original function after running Rescue and Recovery. I know that this is a minor bug, but this bug and another BIOS bug (in the network boot order menu, which I'll post after this one), which arose in less than a week after I received the computer, makes me question the ThinkPad's reputation for high-quality engineering.

ThinkPad
Service and Troubleshooting Guide
Finding information with the ThinkVantage button
The blue ThinkVantage button can help you in many situations when your
computer is working normally, and even when it is not. Press the
ThinkVantage button to open the Productivity Center thinkvantage toolbox and get access to
informative illustrations and easy-to-follow instructions for getting started and
staying productive.
You can also use the ThinkVantage button to interrupt the startup sequence of
your computer and start the Rescue and Recovery
™
in the windows environment it no longer opens productivity center it opens the toolbox if the toolbox is installed
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Backup/Recovery from web application

Hello guys,
I am using Oracle 9i as DB and Oracle 9iAS for web application server. I want to provide Backup and Recovery functionality to the user via web. I don't know any thing in this regard.
Is it possible that we can take backup and recovery from web application?
Is there any alternative for this function.
any other comments will be appreciated.
Thank you,
Jawed Nazar Ali

Read this article in order to get an idea about Java Stored Procedures.
Oracle Developer JAVA STORED PROCEDURES
Simplify with Java Stored Procedures
By Kuassi Mensah
Use Java stored procedures to bridge SQL, XML, Java, and J2EE and Web Services.
Stored procedures allow a clean separation of persistence logic that runs in the database tier from business logic that runs in the middle tier. This separation reduces overall application complexity and increases reuse, security, performance, and scalability.
A major obstacle, however, for widespread adoption of stored procedures is the set of various proprietary, database-dependent implementation languages that different database vendors use. The use of Java-based stored procedures fixes this concern. Oracle has implemented ANSI standards that specify the ability to invoke static Java methods from SQL as procedures or functions. This implementation is called simply "Java stored procedures."
In this article, you will learn how Java stored procedures help simplify and increase the performance of your business logic and extend database functionality. I'll show how Oracle enables the use of Java stored procedures within the database. I'll also look at how Java stored procedures access data, and show how to create a basic Java stored procedure.
PL/SQL or Java
When you think of Oracle stored procedures, you probably think of PL/SQL. Oracle, however, has provided Java support in the database since Oracle8i, to offer an open and portable alternative to PL/SQL for stored procedures. I can hear the $64,000 question: "How do I choose between PL/SQL and Java? Should I forget all the things I've been told about PL/SQL and move on to the greener Java pastures?"
Both languages are suitable for database programming, and each has its strengths and weaknesses. In deciding which language to use, here's a general rule of thumb:
Use PL/SQL for database-centric logic that requires seamless integration with SQL and therefore complete access to database objects, types, and features.
Use Java as an open alternative to PL/SQL for database independence, but also for integrating and bridging the worlds of SQL, XML, J2EE, and Web services.
OracleJVM Lets You Run Java within the Database
Since Oracle8i, Release 1 (Oracle 8.1.5), Oracle has offered a tightly integrated Java virtual machine (JVM) that supports Oracle's database session architecture. Any database session may activate a virtually dedicated JVM during the first Java code invocation; subsequent users then benefit from this already Java-enabled session. In reality, all sessions share the same JVM code and staticsonly private states are kept and garbage collected in an individual session space, to provide Java sessions the same session isolation and data integrity capabilities as SQL operations. There is no need for a separate Java-enabled process for data integrity. This session-based architecture provides a small memory footprint and gives OracleJVM the same linear SMP scalability as the Oracle database.
Creating Java Stored Procedures
There are a few steps involved in turning a Java method into a Java stored procedure. These include loading the Java class into the database using the loadjava utility, and publishing the Java methods using a call specification (Call Spec) to map Java methods, parameter types, and return types to their SQL counterparts. The following section shows how to do this.
I'll use a simple Hello class, with one method, Hello.world(), that returns the string "Hello world":
public class Hello
public static String world ()
return "Hello world";
The Loadjava Utility
Loadjava is a utility for loading Java source files, Java class files, and Java resource files; verifying bytecodes; and deploying Java classes and JAR files into the database. It is invoked either from the command line or through the loadjava() method contained within the DBMS_JAVA class. To load our Hello.class example, type:
loadjava -user scott/tiger Hello.class
As of Oracle9i Release 2, loadjava allows you to automatically publish Java classes as stored procedures by creating the corresponding Call Specs for methods contained in the processed classes. Oracle provides Oracle9i JDeveloper for developing, testing, debugging, and deploying Java stored procedures.
The Resolver Spec
The JDK-based JVM looks for and resolves class references within the directories listed in the CLASSPATH. Because Oracle database classes live in the database schema, the OracleJVM uses a database resolver to look for and resolve class references through the schemas listed in the Resolver Spec. Unlike the CLASSPATH, which applies to all classes, the Resolver Spec is applied on a per-class basis. The default resolver looks for classes first in the schema in which the class is loaded and then for classes with public synonyms.
loadjava -resolve <myclass>
You may need to specify different resolvers, and you can force resolution to occur when you use loadjava, to determine at deployment time any problems that may occur later at runtime.
loadjava -resolve -resolver "((* SCOTT) (foo/bar/* OTHERS)
(* PUBLIC))"
Call Spec and Stored Procedures Invocation
To invoke a Java method from SQL (as well as from PL/SQL and JDBC), you must first publish the public static method through a Call Spec, which defines for SQL the arguments the method takes and the SQL types it returns.
In our example, we'll use SQL*Plus to connect to the database and define a top-level Call Spec for Hello.world():
SQL> connect scott/tiger
SQL> create or replace function helloworld return
VARCHAR2 as language java name 'Hello.world () return
java.lang.String';
Function created.
You can then invoke the Java stored procedure as shown below:
SQL> variable myString varchar2[20];
SQL> call helloworld() into :myString;
Call completed.
SQL> print myString;
MYSTRING
Hello world
Java stored procedures are callable, through their Call Spec, from SQL DML statements (INSERT, UPDATE, DELETE, SELECT, CALL, EXPLAIN PLAN, LOCK TABLE, and MERGE), PL/SQL blocks, subprograms, and packages, as well as database triggers. The beauty of Call Spec is that stored procedure implementations can change over time from PL/SQL to Java or vice versa, transparently to the requesters.
Call Spec abstracts the call interface from the implementation language (PL/SQL or Java) and therefore enables sharing business logic between legacy applications and newer Java/J2EE-based applications. At times, however, when invoking a database-resident Java class from a Java client, you may not want to go through the PL/SQL wrapper. In a future release, Oracle plans to provide a mechanism that will allow developers to bypass the Call Spec.
Advanced Data-Access Control
Java stored procedures can be used to control and restrict access to Oracle data by allowing users to manipulate the data only through stored procedures that execute under their invoker's privileges while denying access to the table itself. For example, you can disable updates during certain hours or give managers the ability to query salary data but not update it, or log all access and notify a security service.
Sharing Data Logic Between Legacy and J2EE Applications
Because legacy applications and J2EE applications both invoke stored procedures through the Call Spec, the same data logic can be shared between J2EE and non-J2EE worlds. Thanks to Call Spec, this data logic can be shared regardless of the implementation language used (whether PL/SQL or Java).
Autogeneration of Primary Keys for BMP Entity Beans
When using BMP for EJB entity beans, a bean instance can be uniquely identified by the auto-generated primary key associated with the newly inserted data as a return value for ejbCreate(). You can retrieve this value within ejbCreate() in one database operation by using a stored procedure that inserts the corresponding data and retrieves or computes the primary key. Alternatively, you could insert the data and retrieve the corresponding key (or ROWID) in one SQL statement, using the RETURN_GENERATED_KEYS feature in JDBC 3.0. However, the stored procedure approach is more portable across JDBC driver versions and databases.
You can implement this pattern with these three steps:
Create the Java stored procedure, defining a public static Java method insertAccount() within a public GenPK class. This method will insert data, compute a unique key (by passing out a sequence number), and return the computed key as primary key.
Define the Call Spec.
CREATE OR REPLACE PROCEDURE insertAccount(owner IN
varchar, bal IN number, newid OUT number)
AS LANGUAGE JAVA NAME 'GenPK.insertAccount(
java.lang.String [])';
Invoke the stored procedure within ejbCreate().
Public AccountPK ejbCreate(String ownerName, int balance) throws CreateException
try {
CallableStatement call = conn.prepareCall{
"{call insertAccount(?, ?, ?)}"};
return new AccountPK(accountID);
Custom Primary Key Finders for CMP Entity Beans
Finder methods are used for retrieving existing EJB entity bean instances. Primary key finders allow you to retrieve a uniquely identified EJB instance. For CMP entity beans, the EJB container automatically generates the primary key finder findByPrimaryKey() method, based on declarative description. In some situations, however, you might need more control; for example, you may need a specialized finder such as findByStoredProcKey(). In these situations, you can use Java stored procedures in conjunction with an object relational framework (such as Oracle9i Application Server [Oracle9iAS] TopLink) to implement a custom primary key finder method. After you define the EJB finder as a REDIRECT or NAMED finder, TopLink will generate the SQL query for retrieving the bean instance.
Data-Driven EJB Invocation
In a data-driven architecture, business logic invocation can be triggered as a result of database operations (such as inserts, updates, or deletes). A Java stored procedure implementing the data logic can be declared as a database trigger to invoke EJBs running in a middle-tier J2EE application server. You can make EJB calls by using either standard remote method invocation (RMI) over Interoperable Inter-ORB Protocol (IIOP), using a J2EE 1.3 compatible server, or RMI over a vendor-specific transport protocol (such as ORMI with Oracle9iAS/OC4J or RMI over T3 with BEA WebLogic). Each application server vendor has its own optimized protocol while providing RMI over IIOP for interoperability. Oracle9iAS supports both RMI calls over IIOP and ORMI protocols.
Data-Driven Messaging
Oracle9i Database embeds Advanced Queuing (AQ), which is an integrated, persistent, reliable, secure, scalable, and transactional message-queuing framework. Oracle exposes AQ features to Java developers through the standard Java Messaging System (JMS) API. Java stored procedures can invoke AQ operations through the JMS interface to allow fast, intra-session, scalable, data-driven messaging.
Java stored procedures can use JMS to invoke AQ operations. You can implement this pattern in four steps:
Create and start the JMS Queue (to do so, embed the following operations within a SQL script):
execute dbms_aqadm.create_queue_table(queue_table =>
'queue1', queue_payload_type =>
'SYS.AQ$_JMS_TEXT_MESSAGE', comment => 'a test queue',
multiple_consumers => false, compatible => '8.1.0');
execute dbms_aqadm.create_queue( queue_name => 'queue1',
queue_table => 'queue1' );
execute dbms_aqadm.start_queue(queue_name => 'queue1');
Create the Java stored procedure (a code snippet is shown):
public static void runTest(String msgBody)
try
// get database connection
ora_drv = new OracleDriver();
db_conn = ora_drv.defaultConnection();
// setup sender (cf online code sample)
// create message
s_msg = s_session.createTextMessage(msgBody);
// send message
sender.send(s_msg);
s_session.commit();
// receive message
r_msg = (TextMessage) receiver.receive();
r_session.commit();
// output message text
String body = r_msg.getText();
System.out.println("message was '"+body+"'");
Create the Call Spec:
create or replace procedure jmsproc (t1 IN VARCHAR)
as language java name 'jmsSample.main (java.lang.String[])';
Invoke the stored procedure:
call jmsproc('hello');
Database-Assisted Web Publishing (Cache Invalidation)
One of the common issues application architects must face is how to cache database information reliably to increase overall system performance. JCACHE is an upcoming standard specification (JSR 107) that addresses this problem. It specifies an approach for temporary, in-memory caching of Java objects, including object creation, shared access, spooling, invalidation, and consistency across JVMs. It can be used to cache read-mostly data such as product catalogs and price lists within JSP. Using JCACHE, most queries will have response times an order of magnitude faster because of cached data (in-house testing showed response times about 15 times faster).
In order to track all the changes to the origin data and refresh the cached data, a Java stored procedure is attached to a table as a trigger. Any change to this table will result in the automatic invocation of this stored procedure, which in turn will call out a defined JSP to invalidate the JCACHE object that maps its state to the database table. Upon invalidation, the very next query will force the cache to be refreshed from the database. Next Steps
READ MORE about Java Stored Procedures
This article is adapted from the white paper "Unleash the Power of Java Stored Procedures." You can find the white paper at:
/tech/java/java_db/pdf/
OW_30820_JAVA_STORED_PROC_paper.PDF
New PL/SQL features in Oracle9i Database, Release 2
/tech/pl_sql/pdf/
Paper_30720_Doc.pdf
Resolver Spec
/docs/products/oracle9i/
doc_library/release2/java.920/a96659.pdf
OracleJVM and Java 2 Security
/docs/products/oracle9i/
doc_library/release2/java.920/a96656.pdf
DOWNLOAD Code
Exercise code examples from this article:
/sample_code/tech/
java/jsp/Oracle9iJSPSamples.html
LEARN about stored procedures as Web services
/tech/webservices
Extending Database Functionality
One of the great things about running Java code directly in the database is the ability to implement new functionality by simply loading the code or library and using the Call Spec to make the entry points (public static methods) available to SQL, PL/SQL, Java, J2EE, and non-Java APIs. Oracle9i Database customers can easily extend database functionality. Oracle itself leverages this capability for new utilities and packages such as the XML Developer Kits (XDKs).
Bridging SQL, PL/SQL, Java, J2EE, .NET, and XML
The Oracle XDK is written in Java and exposes its public methods as Java stored procedures, extending the database's XML programmability. SQL, PL/SQL, Java, J2EE, and non-Java (.NET) business logic all have access to the XML parser, the XSLT processor, the XPath engine, and XML SQL Utility (XSU).
The XML parser is accessible through the xmlparser and xmldom packages. XSU is a Java utility that generates an XML document from SQL queries or a JDBC ResultSet, and writes data from an XML document into a database table or view. Using XSU, XML output can be produced as Text, DOM trees, or DTDs. XSU is exposed to PL/SQL through the dbms_xmlquery and dbms_xmlsave packages.
Conclusion
The integration of the Oracle database with a Java VM enables the creation of portable, powerful, database-independent data logic and persistence logic. The loose coupling of business logic that runs in the middle tier with data logic that runs in the database tier improves application scalability, performance, flexibility, and maintenance.
Kuassi Mensah ([email protected]) is a product manager in the Server Technologies division at Oracle.
http://otn.oracle.com/oramag/oracle/03-jan/o13java.html
Joel Pérez

Unable to install ThinkVantage Rescue and Recovery on new X220t

I recieved me new X220t a few days ago and when trying to install Rescue and Recovery from the ThinkVantage Toolbox I'm greeted with a message stating there's not enough free space to install or upgrade the Rescue and Recovery environment.   Space can't be an issue as I'm running nothing but Windows 7 64bit Professional and Office 2010.
I could go the 3rd party route with Acronis but I'd rather use what came with my system and save some money.

It's an 80GB Intel SSD. Here is the copy/past from msinfo32.
Description    Disk drive
Manufacturer    (Standard disk drives)
Model    INTEL SSDSA2CW080G3
Bytes/Sector    512
Media Loaded    Yes
Media Type    Fixed hard disk
Partitions    3
SCSI Bus    0
SCSI Logical Unit    0
SCSI Port    0
SCSI Target ID    0
Sectors/Track    63
Size    74.53 GB (80,023,749,120 bytes)
Total Cylinders    9,729
Total Sectors    156,296,385
Total Tracks    2,480,895
Tracks/Cylinder    255
Partition    Disk #0, Partition #0
Partition Size    342.00 MB (358,612,992 bytes)
Partition Starting Offset    1,048,576 bytes
Partition    Disk #0, Partition #1
Partition Size    64.93 GB (69,717,721,088 bytes)
Partition Starting Offset    359,661,568 bytes
Partition    Disk #0, Partition #2
Partition Size    9.27 GB (9,948,889,088 bytes)
Partition Starting Offset    70,077,382,656 bytes
You're right about using the Win7 backup.   It will suit me just fine but I was curious as to why R&R was giving me trouble about not wanting to install.

Rescue and recovery on T60

I cannot install rescue and recovery from SWtools.
An error message comes up: not enough space on boot sector to install the boot manager of rNr.
Any idea what happend or what to do?
thx in advanced

Hi migi66,
First I recommend downloading and installing the latest version of RnR:- http://www-307.ibm.com/pc/support/site.wss/MIGR-4Q2QAK.html
If that doesn't solve the issue, try proceeding solutions:-
http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Rescue-And-Recovery-On-Clean-Install-Of-...
http://forums.lenovo.com/t5/ThinkVantage-Technologies/Rescue-and-Recovery-installation-fails-not-eno...
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Rescue and Recovery restore does not work because of incorrect display size

I am unable to restore my system when booting Rescue and Recovery from the Service Partition or DVD. R&R configures my monitor resolution as 640x480x16 but displays as if there we many more pixels available. The result is that only a portion of the screen is visible and crucial commands are cut off and unusable.
I have read elsewhere that this might be corrected by updating the DisplayResolution parameter in the WINBOM.INI files found in the \MININT and \MININT\SYSTEM32 directories. I have tried this, setting DisplayResolution=1024x768x16, resetting to the default 640x480x16 and even removing the parameter altogether, all to no effect. My monitor always comes up at 640x480 and screens are always cut off.
A puzzling feature of this problem is that Opera help screens do not exhibit this problem. They display at an appropriate size, maximize correctly and so on.
Any help would be appreciated,
Herb
Solved!
Go to Solution.

Hi hgirard,
http://forum.thinkpads.com/viewtopic.php?p=341939#p341939
Does this help?
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Posting of Loan - Payment and recovery from Employees

Similar Messages

Maybe you are looking for