Posting of materials using

Hi Experts,
I am creating the material with Basic data1 and baisic data2 using the Tcode MM01 and I am posting the same created material to other logical system using
the tcode bd10,whenI go and see them in we05 I am not finding the Idoc's,please
help me over this issue,answers will be rewarded with good number of points.
Regards,
Kiran.

Hi RitiG,
                                                                                Unfortunately, as you have seen, the only two available references to post a Transfer posting with MIGO are 'Others' and 'Reservation'.
This is, it is not possible to post a transfer posting in MIGO with reference to a Purchase Order. This is the standard behavior and it cannot be customized.
If you wish this option to be available to transfer stock to your subcontracting vendor (using the movement type 541), then, you will need to make this posting via the business transaction 'A08 Transfer posting' - 'R10 Others', but then you will not have any reference to the Purchase Order.
Alternatively, you can use transaction ME2O, which uses this reference to the Purchase Order, or you can continue using MB1B.
Best regards,
Esther

Similar Messages

Automatic posting from materials management

We use transaction OMWB for determining the accounts for automatic posting from materials management.
Is it possible to determine different accounts for small differences (DIF) for different company codes that belong to the same chart of accounts??

Hi
yes this can be acheived via valuation modification class just chk with FI for further settings.
Regards

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

Restart your WiFi router and printer by removing power for 30 seconds.

Monitoring of materials used in projects

hi,
we use projects for construction projects..
at start of projects, we have list of all materials needed for the project (from estimating department)
during the project, materials and qty have changes due to variations and wrong estimates
at the end of project, the actual materials used is different from initial estimates..
now what i need is how to best maintain/monitor/track the materials at the beginning, during and after the project in terms of variance and change in materials and quantities..
any input would be appreciated..
thanks in advance..

Hello Ramesh
I understand your response on the plan version, but rather than a plan version, have you considered a project version.
I have used this technique before when I want a snapshot of the project at the time of release so that I can compare changes to the dates at time of approval (effectively my baseline) against the current scheduled dates as the version dates would not be able to be changed or rescheduled.
I did not have material ordered from projects so I cannot say whether the material/price is also captured in the version snapshot.
You may need to develop custom reports to read the project version that is stored to compare against the current active/operating version.
Regards
Stuart

Report to Generate Materials Used for the Production of FG/SFG Materiak

Dear Experts,
I am working for a Cement Factory. CLINKER is a SFG used for the production of FG Cement.
RMOPCK1 and FINECOAL are another SFG used for the Production of CLINKER
RMOPCK1
+ = CLINKER + (Different Materials) = CEMENT
FINECOAL
For CLINKER we will create process order every month similarly for RMOPCK1 and FINECOAL.
RMOPCK1 is using 5 Raw materials and FINECOAL is using 1 raw material
Limestone + Silica 1 + Silica 2 + Bauxite 1+ Ironore 1 = RMOPCK1 and
Rawcoal = FINECOAL
All the raw materials, SFGs are used for creating different variety of cement.
I want to know for a certain period how much is the CLINKER produced and How much is the raw materials used for producing the CLINKER.
When i try through KOB1 with the process orders for CLINKER it is giving me total usage ofr RMOPCK1 and FINECOAL for producing the CLINKER.
I Want to know for ex:
the quantity of raw materials (Limestone + Silica 1 + Silica 2 + Bauxite 1+ Ironore 1 )used for producing ex: 1000 TON of CLINKER.
Please help. Thanks
Edited by: simonjohn on Oct 9, 2011 6:46 PM

Thanks

Posting period 011 2013 is not open while posting the document using F-02 getting the error

Hi SAP Captains,
Pls help me here.
While posting the document using T-code F-02 getting the error "Posting period 011 2013 is not open.
Please help me how to do, can you provide step by step.
Rgds..Suresh

Hi Suresh,
You can search google and will get number of posts on this. This will lead to duplication of similar posts on forum.
The message says "FI posting period is closed for 11th period of 2013". In which period you are trying to post the transaction?
If it is past, open the FI posting periods in OB52.
BR, Srinivas Salpala

Validation when posting a document using T. Code FB50 or F-02

Dear Experts
Please let me know on how to validate when posting a Cross Company Transaction using T. Codes FB50 or F-02. The requirement is to restrict Branches (each Branch is a Company Code in SAP) to post any Cross Company documents by selecting HO Company Code in Line Item, system has to stop the User by giving Error Message.
We can't control this using User level Authorizations because, here the Authorization is provided to the Users to post the Transactions using T. Codes FB50 and F-02.
To restrict this, I created a Validation as below:
Prerequisite:
BKPF-TCODE = 'FB50' OR BKPF-TCODE = 'F-02' AND
BKPF-BUKRS = 'Br. Company Code' AND
BSEG-BUKRS = 'HO Company Code'
Check:
FALSE
Message:
You Can't post Cross Company Transactions using T.Code FB50 or F-02
And I activated the above Validation in OB28 for HO and Branch Company Codes. But the Validation is not working properly. Can anybody help me on how to proceed further in this regard please.

Hi,
I haven't tried to use a transaction code for Validation purpose. Instead, I have used document type as prerequisite and then check:
BKPF-BUKRS = 'Br. Company Code' AND
BSEG-BUKRS = 'HO Company Code'
If the condition is met, it displays an error (per the message in validation) while completing the line item details on posting a document.
Please let me know if that helps. If not, I can try to replicate your scenario and let you know if there is anything missing.
Thanks,
Ashish

Posting a document using RFBIBL00

Hi,
I want to post certain details using this program. I have populated the three structures: BGR00, BBKPF(header data) and BBSEG(line item data). The session gets opened but is terminated while reading the header data strucure. It gives this error:
Session 1 session name SESSION was opened
Doc. 1 record 1 : Invalid record type /
... Last header record ...
it gives the list of structure fields, and after the last field, it says " Editing terminated".
I am not populating all the fields , only 6 fields which i require. Is there any fixed format in populating these structures while writing them to the file?
Any help would be appreciated,
Thanks,
Sruthy

Hi Sruthy
I guess you have missed populating field STYPE in each of the records which identifies the actual structure.
Below is how you have to pass for them:
<b>Struc --> Value
BGR00 --> 0
BBKPF --> 1
BBSEG --> 2</b>
Kind Regards
Eswar

Error while posting initial quantities using stocktaking template of DTW

Hi All,
I am getting this below error while posting initial quantities using stocktaking template of DTW.
Can not find this object in B1Application-defined or object-defined error65171
I am using B1 8.8 PL10 version. Below is my sample txt file data
ItemCode WarehouseCode Counted
ItemCode WarehouseCode Counted
CHA0002 1 500
CHA0076 1 4000
Any help is appreciated.
Regards,
Noor Hussain

Hi Gordon,
Thanks a lot for your time. I am able to post the quantities. Now please let me know how to update the item cost/price for these items using DTW ?
Regards,
Noor Hussain

Error whil posting FI Document using 'F-28' 'Entry not Possible'

Hi ,
When i trying post FI Dcoument using 'F-28'. As sudden given Posting key and account number i m getting the error "Entry not possible'. Can someone tell what is the reason for this.
Regards
Balamurugan N

Check table TBSL : posting key TBSL-BSCHL give allowed account type TBSL-KOART
A-nlagen(Asset),
D-ebitoren(customer),
K-reditoren(vendor),
M-aterial,
S-achkonten (general ledger))
So, you cannot use a [posting key|http://help.sap.com/saphelp_46c/helpdata/en/96/8b3ee943ce11d189ee0000e81ddfac/frameset.htm] like 40 or 50 for a customer account or a 01 or 11 for a bank or expense/fee account.
Regards,
Raymond

Document Splitting problem while posting asset acquisition using F-90

Hi,
We are using ECC 6.0 with document splitting functionality and are facing problem while posting asset acquisition using F-90.
The transaction entry details are as below:
Document Type - KR
Vendor Line Item PKey - 31
Amount - 10000
Asset Line Item with PKey - 70, Transaction Type - 100
Amount - 10000
The Document Splitting Rule - 0000000012 is used and the Field Status Group for the Vendor Reconciliation Account and Asset Reconciliation account have Cost Center, Profit Center and Segment as "Optional" field.
The Balance Sheet Item - Asset Reconciliation Account has been created as
Secondary Cost Element - 90.
The Profit Center and Segment field have been made mandatory and zero balancing is also set in the settings for Document Splitting.
While posting asset acquisition using F-90, we are getting the error message - "Balancing Field "Profit Center" in line item 001 not filled"
The first line refers to the Vendor Line item.
Please let me know how to overcome this error.
Regards,
Ramanand

Please follow the below path and do config :-
IMG>FA>Asset Accounting>Integration with the General Ledger>Additional Account Assignment Objects>Specify Account Assignment Types for Account Assignment Objects
here you have to put KOSTL (Cost center) for both against APC and Dep run for each Dep area.
Thanks
Pyare

Posting goods receipt using transaction MB1C

Hi
When I posting goods receipt using transaction MB1C , I am getting following error
Account 310000 for Transo/event key BSX is a A control Account.
Please tell me the solution for this error.
kalai.

Dear Suriya,
If your issue is still un-resolved, Just try with:
T. Code: FS00
Key-in your G/L Account - 310000 & Company Code, in respective fields; go to
Tab: Create/bank/interest
Here, you will find a Box: Post automatically only. Enable the box (check-mark the box) for GR/IR clearing account.
Jope, this may help in some ways.
Best Regards,
Amit.
Note: In continuation to others' suggestion, I'll also suggest to consult FI-Personnel, at your end.

Post Goods issue using bapi_goodsmvt_create

hi,
Iam trying to do post goods issue using bapi_goodsmvt_create. please let me know what are the mandatory fields to be passed?

hi,
*& Report ZRPT_SUB_KO01GOODSMOVEMENT
REPORT ZRPT_SUB_KO01GOODSMOVEMENT.
PARAMETERS : P_BAG(17) TYPE C,
             P_ZZORG LIKE zaUFK-ZZORG,
             P_MATNR LIKE MARA-MATNR,
             P_WERKS LIKE AUFK-WERKS,
             P_WERK LIKE AFPO-PWERK,
             P_DATE LIKE MKPF-BUDAT,
             P_LGORT LIKE GOITEM-LGOBE.
DATA : BDC_DATA TYPE STANDARD TABLE OF BDCDATA. "internla table for bdc data
DATA : WA_BDC_DATA TYPE BDCDATA .                "work area for bdc data
DATA : T_XMSEG TYPE   MSEG.
DATA : T_XMKPF TYPE MKPF.
DATA : V_BAGS1(17) TYPE C.
DATA : BEGIN OF WA_MB1B,
       ZZGCODE TYPE ZMIGO-ZZGCODE,
       ZZGBAGS TYPE ZMIGO-ZZGBAGS,
       WERKS TYPE AUFK-WERKS,
       LGORT TYPE VBRP-LGORT,
       ZZORG TYPE zAUFK-ZZORG,
       END OF WA_MB1B.
DATA : V_MATERIAL TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
data : v_date(10) type c.
DATA : T_GOODSMVT_HEADER TYPE BAPI2017_GM_HEAD_01,
       T_GOODSMVT_CODE TYPE BAPI2017_GM_CODE,
       T_GOODSMVT_ITEM TYPE STANDARD TABLE OF BAPI2017_GM_ITEM_CREATE,
       T_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
DATA : WA_GOODSMVT_ITEM TYPE BAPI2017_GM_ITEM_CREATE.
DATA : BEGIN OF S_MARA,
       MEINS LIKE MARA-MEINS,
       END OF S_MARA.
DATA : MATERIALDOCUMENT TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
*FORM GOODSMOVEMENT TABLES T_RETURN
                         USING WA_MB1B LIKE WA_MB1B.
SELECT SINGLE MEINS
               FROM MARA
               INTO S_MARA
               WHERE MATNR = P_MATNR.
   CONCATENATE p_date6(2) p_date4(2) p_date+0(4) INTO V_DATE SEPARATED BY '.'.
    T_GOODSMVT_HEADER-PSTNG_DATE = P_DATE.
    T_GOODSMVT_HEADER-DOC_DATE = P_DATE.
    T_GOODSMVT_CODE-GM_CODE = '04'.
    WA_GOODSMVT_ITEM-MATERIAL =      P_MATNR.                    "'000000000000001556'.
    WA_GOODSMVT_ITEM-PLANT =        P_WERK.                     " '1000'.
    WA_GOODSMVT_ITEM-STGE_LOC =      P_LGORT.                    " '0001'.
    WA_GOODSMVT_ITEM-MOVE_TYPE =     'Z42'.
    WA_GOODSMVT_ITEM-VENDOR =         P_ZZORG.                   "'0000100224'.
    WA_GOODSMVT_ITEM-ENTRY_QNT =      P_BAG.                   " '1'.
    WA_GOODSMVT_ITEM-ENTRY_UOM =     S_MARA-MEINS.
    WA_GOODSMVT_ITEM-ENTRY_UOM_ISO = S_MARA-MEINS.
    WA_GOODSMVT_ITEM-MOVE_PLANT = P_WERKS.
    APPEND WA_GOODSMVT_ITEM TO T_GOODSMVT_ITEM.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
      GOODSMVT_HEADER          = T_GOODSMVT_HEADER
      GOODSMVT_CODE            = T_GOODSMVT_CODE
IMPORTING
    MATERIALDOCUMENT           = V_MATERIAL
TABLES
      GOODSMVT_ITEM            = T_GOODSMVT_ITEM
RETURN                        = T_RETURN.
BREAK shailajaa.
           EXPORT t_return to MEMORY ID '123'.
           EXPORT V_MATERIAL TO MEMORY ID 'MAT'.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
     EXPORTING
       WAIT          = ' '.
*ENDFORM.

Creation of Materials Using MATERIAL_MAINTAIN_DARK

Hello All,
Im trying to create Materials using the Function Module MATERIAL_MAINTAIN_DARK in program. Problem is that, In tables of the fuction module amarc_ueb, amakt_ueb and amard_ueb , Im passing 2 records in each tables. But the MARC, MAKT and MARD tables are populated with only one record in each loop pass.
Please give me suggessions to solve this problem.
Good answers will be appreciated.
Thanks in advance.
Best Regards,
Sasidhar Reddy Matli.

Hello Ajay,
Please find my code below..
* Create Material - Check for KZ_TEST for test
CALL FUNCTION 'MATERIAL_MAINTAIN_DARK'
   EXPORTING
    flag_muss_pruefen               = 'X'
*    SPERRMODUS                      = 'E'
    max_errors                      = 0
    p_kz_no_warn                    = 'E'
    kz_prf                          = ' '
    kz_verw                         = 'X'
    kz_aend                         = 'X'
    kz_dispo                        = 'X'
    kz_test                         = kz_test
    no_database_update              = ' '
    call_mode                       = 'ACT'
*   CALL_MODE2                      = ' '
    user                            = sy-uname
*   SUPPRESS_ARRAY_READ             = ' '
*   FLG_MASS                        = 'X'
*   DONT_PROCESS_HEADERS            =
IMPORTING
    matnr_last                      = g_f_matnr_last
    number_errors_transaction       = g_f_number_err
   TABLES
     amara_ueb                       = gt_mara_ueb
     amakt_ueb                       = gt_makt_ueb
     amarc_ueb                       = gt_marc_ueb
     amard_ueb                       = gt_mard_ueb
*   AMFHM_UEB                       =
*   AMARM_UEB                       =
*   AMEA1_UEB                       =
     ambew_ueb                      = gt_mbew_ueb
     asteu_ueb                      = gt_steu_ueb
*   ASTMM_UEB                       =
*   AMLGN_UEB                       =
     amlgt_ueb                       = gt_mlgt_ueb
*   AMPGD_UEB                       =
*   AMPOP_UEB                       =
*   AMVEG_UEB                       =
*   AMVEU_UEB                       =
     amvke_ueb                       = gt_mvke_ueb
*   ALTX1_UEB                       =
*   AMPRW_UEB                       =
*   AMFIELDRES                      =
     amerrdat                        = gt_errs
EXCEPTIONS
   kstatus_empty                   = 1
   tkstatus_empty                  = 2
   t130m_error                     = 3
   internal_error                  = 4
   too_many_errors                 = 5
   update_error                    = 6
   error_propagate_header          = 7
   OTHERS                          = 8.
IF NOT ( sy-subrc IS INITIAL ).
    ROLLBACK WORK.
ELSE.
    COMMIT WORK.
Best Regards,
Sasidhar Reddy matli.

Can't post to Craigslist using iPhone?

Seems you cant post to Craigslist using iPhone. All go's well until your asked to enter the "Verification Word" which is not an option with the iPhone. Does this have something to do with the lack of Jave or something. It's no big deal I'm just curious.

Zerimar,
It appears to use Javascript, not Java.
Make sure the Javascript option is turned on in Settings->Safari.
Hope this helps,
Nathan C.

Posting of materials using

Similar Messages

Maybe you are looking for