Posting Of SOAP message

Hi Experts,
Can i post SOAP message directly to integration server, without using sender soap Communication channel?
If yes how?
Thanks in advance

Hi,
This will be help for you going forward with you case
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8?quicklink=index&overridelayout=true
regards
ramesh

Similar Messages

  • Problem in Posting a SOAP message to XI

    Hi,
    I am exposing an RFC as a web service.
    And i did all the necessary configuration.
    But when i tried to post the message to XI.
    Am getting the following error.
    Message Servlet is in Status OK
    Status information:
    Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/xi/645_VAL_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#7 $) bound to /MessageServlet
    Classname ModuleProcessor: null
    Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
    Lookupname for remoteModuleProcessorLookupName: null
    ModuleProcessorClass not instantiated
    ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0
    ModuleProcessorRemote not instantiated
    Please guide if you have come across such scenarios

    Hi,
    Please see the SOAP ststud..
    http://<host>:5<sys#>00/mdt/amtServlet
    also you might check any error logs.
    The error is because of invalid xml document. So check the validity of the xml message ie. after first mapping i.e Req mapping.
    For this you can refer this -
    http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
    See the below links
    Also this blog may help you-/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
    Could not post a SOAP request  to the interface
    Message Servlet is in Status ERROR
    Error while posting messages to SOAP sender adapter SP 13
    http://localhost:50000/XISOAPAdapter/HelperServlet?action=FindChannel&channel=PartyA:SOAPService:soapchannel
    SOAP Adapter in PCK
    Regards
    Chilla..

  • Error while posting SOAP message

    I am trying to post a SOAP message but I keep getting this error. Can anybody help me on this. I tried using ALTOVA spy and SOAP Ui but the result is the same error.
         <SOAP:Body>
              <SOAP:Fault>
                   <faultcode>SOAP:Server</faultcode>
                   <faultstring>Server Error</faultstring>
                   <detail>
                        <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                             <context>XIAdapter</context>
                             <code>ADAPTER.JAVA_EXCEPTION</code>
                             <text><![CDATA[
    com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=null;
    *     at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBindingByChannelId*(AbstractLookupManager.java:173)
         at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:431)
    Scenario is SOAP Sender and IDOC reciever.

    I tried reconfiguring also.
    When I test from Integration Engine in RWB using the test message it is sucsseful. Infact I can see the IDOC too.
    But when the basis guy tested with Adapter engine in RWB using the test tool, it gives the following error:
    Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=BusComp_Siebel1;TS=;AN=SI_Sales_Order_OB_Async;ANS=http://trm.com:o2b:SalesOrderCreate; in the current context [Unknown].
    Any idea where is the problem.
    When we tried the WSN step we are facing this error in the very first step.
    WSDL1.1, WSDL 2.0 definition element expected. Found [html: null] .
    Edited by: Chandra Gunapati on Oct 7, 2009 10:00 PM

  • Posting XML via HTTP post returns "Envelope missing in SOAP message header"

    Hi,
    I am trying to post a simple XML message directly to the integration server using an html document, where the form that contains the XML message is a simple
    <b><FORM action="http://servername:8000/sap/xi/engine?type=entry" method="post"></b>
    So, I add my xml message like this:
    <?xml version="1.0" encoding="UTF-8">
    <ns:PlantMaintenanceMessageType xmlns:ns="http://sap.com/demo/plantmaintenance">
          <EquipmentID>SLIEQUIP5</EquipmentID>
          <FunctionalLocation>KB</FunctionalLocation>
          <Date/>
          <Time/>
    </ns:PlantMaintenanceMessageType>
    but I get a message back from the Integration Server as:
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIProtocol</SAP:Category>
      <SAP:Code area="PARSER">ITEM_MISSING</SAP:Code>
      <SAP:P1>Envelope</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <b><SAP:Stack>XML tag Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack></b>
      </SAP:Error>
    Seems like I am missing the Envelope so my Integration Server can understand my post. What does the Envelope look like or should conatain so that the Integration Server accepts my XML file ?
    Thanks !

    This is the trace
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">Party normalization: sender</Trace>
      <Trace level="1" type="T">Sender scheme external =</Trace>
      <Trace level="1" type="T">Sender agency external =</Trace>
      <Trace level="1" type="T">Sender party external =</Trace>
      <Trace level="1" type="T">Sender party normalized =</Trace>
      <Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
      <Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.1</Trace>
      <Trace level="2" type="T">Host = sapqxh:8020</Trace>
      <Trace level="2" type="T">Server protocol = HTTP/1.1</Trace>
      <Trace level="2" type="T">Remote address = 10.228.137.106</Trace>
      <Trace level="1" type="T">COMMIT is done by XMB !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
      <Trace level="3" type="T">Getting type of XMB...</Trace>
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="2" type="T">XMB kind = CENTRAL</Trace>
      <Trace level="3" type="T">Start pipeline found</Trace>
      <Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
      <Trace level="3" type="T">No triggers found. OK.</Trace>
      </Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="3" type="T">system-ID = QXH</Trace>
      <Trace level="3" type="T">client = 220</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = PISUPER</Trace>
      <Trace level="1" type="Timestamp">2008-07-18T14:19:04Z CET</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 4880474945AE67E2E10000000AE4896A</Trace>
      <Trace level="1" type="T">PLNAME = CENTRAL</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">QOS = EO</Trace>
      <Trace level="3" type="T">Message-GUID = 4880474945AE67E2E10000000AE4896A</Trace>
      <Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = CENTRAL</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
      <Trace level="3" type="T">Generate prefixed queue name</Trace>
      <Trace level="1" type="T">Queue name : XBTL0000</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTL0000</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="3" type="T">Setup qRFC Scheduler</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="3" type="T">Call qRFC .... MsgGuid = 4880474945AE67E2E10000000AE4896A</Trace>
      <Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
      <Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
      <Trace level="3" type="T">OK.</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="3" type="T">Version number = 000</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 001</Trace>
      <Trace level="3" type="T">Message version 000</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      <Trace level="1" type="T">--start sender interface action determination</Trace>
      <Trace level="1" type="T">select interface MIOA_US139_EmployeeData*</Trace>
      <Trace level="1" type="T">select interface namespace urn:abbott-com:US139</Trace>
      <Trace level="1" type="T">found interface MIOA_US139_EmployeeData</Trace>
      <Trace level="1" type="T">found action ARCH</Trace>
      <Trace level="1" type="T">set interface action to ARCH</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
      <Trace level="3" type="T">Trace object available again now. OK.</Trace>
      <Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
      <Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
      <Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
      <Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
      </Trace>
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
      <Trace level="2" type="T">Increment log sequence to 001</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="3" type="T">system-ID = QXH</Trace>
      <Trace level="3" type="T">client = 220</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = PISUPER</Trace>
      <Trace level="1" type="Timestamp">2008-07-18T14:19:08Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = CENTRAL</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline attributes</Trace>
      <Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
      <Trace level="3" type="T">ENABLE = 1</Trace>
      <Trace level="3" type="T">TRACELEVEL = 0</Trace>
      <Trace level="3" type="T">EXEMODE = A</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline elements</Trace>
      <Trace level="3" type="T">ELEMPOS = 0001</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0002</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0003</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0004</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0007</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0008</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0009</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="1" type="Timestamp">2008-07-18T14:19:08Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
    - <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
      <Trace level="1" type="Timestamp">2008-07-18T14:19:08Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">Start without given receiver</Trace>
      <Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
      <Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
      <Trace level="2" type="T">...valid Receiver w/o Condition: - BS_AIMS</Trace>
      <Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
      <Trace level="2" type="T">Number of Receivers:1</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2008-07-18T14:19:08Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 001</Trace>
      <Trace level="3" type="T">Message version 001</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
    - <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
      <Trace level="1" type="Timestamp">2008-07-18T14:19:11Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_AIMS MIIA_US139_EmployeeData</Trace>
      <Trace level="2" type="T">...valid InbIf without Condition: MIIA_US139_EmployeeData</Trace>
      <Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2008-07-18T14:19:11Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 002</Trace>
      <Trace level="3" type="T">Message version 002</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
    - <!--  ************************************
      -->
      <Trace level="1" type="Timestamp">2008-07-18T14:19:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
      <Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="2" type="T">got property produced by receiver determination</Trace>
      <Trace level="1" type="T">number of receivers: 1</Trace>
      <Trace level="1" type="T">Single-receiver split case</Trace>
      <Trace level="1" type="T">Post-split internal queue name = XBTM0000</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Persisting single message for post-split handling</Trace>
      <Trace level="1" type="T" />
      <Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 012</Trace>
      <Trace level="3" type="T">Message version 003</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
      <Trace level="3" type="T">Trace object available again now. OK.</Trace>
      <Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
      <Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
      <Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
      <Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
      </Trace>
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
      <Trace level="2" type="T">Increment log sequence to 005</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="3" type="T">system-ID = QXH</Trace>
      <Trace level="3" type="T">client = 220</Trace>
      <Trace level="3" type="T">language = E</Trace>
      <Trace level="3" type="T">user = PISUPER</Trace>
      <Trace level="1" type="Timestamp">2008-07-18T14:19:20Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
      <Trace level="3" type="T">External PLID = CENTRAL</Trace>
      <Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline attributes</Trace>
      <Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
      <Trace level="3" type="T">ENABLE = 1</Trace>
      <Trace level="3" type="T">TRACELEVEL = 0</Trace>
      <Trace level="3" type="T">EXEMODE = A</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline elements</Trace>
      <Trace level="3" type="T">ELEMPOS = 0001</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0002</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0003</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0004</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0007</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0008</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">ELEMPOS = 0009</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">FL_DUMMY =</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T" />
      <Trace level="1" type="Timestamp">2008-07-18T14:19:20Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
      <Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
    - <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
      <Trace level="1" type="Timestamp">2008-07-18T14:19:20Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
      <Trace level="2" type="T">......attachment XI_Context not found</Trace>
      <Trace level="3" type="T">Mapping already defined in interface determination</Trace>
      <Trace level="3" type="T">Object ID of Interface Mapping 3CCA7AE76D3F33F19F8D7A8DAD494E65</Trace>
      <Trace level="3" type="T">Version ID of Interface Mapping C387A5F00F8B11DCAB84C751AAE12E82</Trace>
      <Trace level="1" type="T">Interface Mapping urn:abbott-com:US139 IM_US139_EmployeeData</Trace>
      <Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_US139_EmployeeData_</Trace>
      <Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
      <Trace level="2" type="T">Mode 0</Trace>
      <Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_US139_EmployeeData_.</Trace>
      <Trace level="3" type="T">Load c387a5f0-0f8b-11dc-ab84-c751aae12e82, urn:abbott-com:US139, -1, com/sap/xi/tf/_MM_US139_EmployeeData_.class.</Trace>
      <Trace level="3" type="T">Search com/sap/xi/tf/_MM_US139_EmployeeData_.class (urn:abbott-com:US139, -1) in swcv c387a5f0-0f8b-11dc-ab84-c751aae12e82.</Trace>
      <Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_US139_EmployeeData_</Trace>
      <Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_US139_EmployeeData_</Trace>
      <Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_US139_EmployeeData_ completed. (executeStep() of com.sap.xi.tf._MM_US139_EmployeeData_</Trace>
      <Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2008-07-18T14:22:07Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 005</Trace>
      <Trace level="3" type="T">Message version 005</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
    - <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
      <Trace level="1" type="Timestamp">2008-07-18T14:22:12Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
      <Trace level="3" type="T">PLSRVTYPE =</Trace>
      <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
      <Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
      <Trace level="2" type="T">Cache Content is up to date</Trace>
      <Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
      <Trace level="2" type="T">-QEHCLNT230</Trace>
      <Trace level="2" type="T">-BS_AIMS</Trace>
      <Trace level="2" type="T">urn:abbott-com:US139.MIIA_US139_EmployeeData</Trace>
      <Trace level="2" type="T">Channel found: - BS_AIMS - CC_BS_AIMS_File_Out_09</Trace>
      <Trace level="2" type="T">no header mapping defined</Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="Timestamp">2008-07-18T14:22:12Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 006</Trace>
      <Trace level="3" type="T">Message version 006</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
      <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER" />
    - <!--  ************************************
      -->
      <Trace level="1" type="Timestamp">2008-07-18T14:22:18Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
      <Trace level="3" type="T">ADRESSMOD = SD</Trace>
      <Trace level="3" type="T">P_CLASS =</Trace>
      <Trace level="3" type="T">P_IFNAME =</Trace>
      <Trace level="3" type="T">P_METHOD =</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Unknown channel type: File</Trace>
      <Trace level="3" type="T" />
      <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
      <Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
      <Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
      <Trace level="3" type="T">ADRESSMOD = SD</Trace>
      <Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
      <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
      <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
      <Trace level="3" type="T">FL_LOG =</Trace>
      <Trace level="3" type="T">FL_DUMMY = 0</Trace>
      <Trace level="3" type="T" />
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
      <Trace level="3" type="T">Channel for adapter engine: File</Trace>
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
      <Trace level="2" type="T">old values in cache (no lock found) - start reading from SLD</Trace>
      <Trace level="1" type="T">error reading SAP_XIAdapterFramework from SLD</Trace>
      <Trace level="2" type="T">Adapter Framework(s) found</Trace>
      <Trace level="2" type="T">Service Port(s) found - take first one</Trace>
      <Trace level="2" type="T">URL found</Trace>
      <Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
      <Trace level="3" type="T">URL = http://sapqxh:52000/MessagingSystem/receive/AFW/XI</Trace>
      <Trace level="3" type="T">User = PIISUSER</Trace>
      <Trace level="3" type="T">Cached =</Trace>
      <Trace level="3" type="T">Creating HTTP-client</Trace>
      <Trace level="3" type="T">HTTP-client: creation finished</Trace>
      <Trace level="3" type="T">Security: Basic authentication</Trace>
      <Trace level="3" type="T">Serializing message object...</Trace>
      <Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
      <Trace level="3" type="T">HTTP-client: request sent</Trace>
      <Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
      <Trace level="3" type="T">HTTP-client: response received</Trace>
      <Trace level="3" type="T">HTTP-client: checking status code...</Trace>
      <Trace level="3" type="T">HTTP-client: status code = 200</Trace>
      <Trace level="3" type="T">Deserializing message object...</Trace>
      <Trace level="1" type="T">Empty response received!</Trace>
      <Trace level="3" type="System_Error">HTTP-client: error response=</Trace>
      <Trace level="3" type="T">HTTP-client: closing...</Trace>
      </Trace>
      </Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 007</Trace>
      <Trace level="3" type="T">Message version 007</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
      <Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="3" type="T">Persisting message Status = 014</Trace>
      <Trace level="3" type="T">Message version 008</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </SAP:Trace>

  • Writting attached file from SOAP message to a FTP folder

    Hi everybody,
    Our scenario is an interface which receives a SOAP message with a file attached. As we don't need to do any mapping into the attachment, we are supposed to deliver that file as it is into a FTP folder.
    Our problem is that we cannot find how to configure File comm channel to write the attached file and no the SOAP XML message which is what we are getting now. Any help on this?
    Thanks in advance.

    Hi
    check these forum posts
    SOAP with attachments
    Mail Sender Adapter - Attachment Handling
    Regards
    Vishnu

  • Trying to parse a Soap Message

    I'm working on creating webservices that will be consumed by
    Director and working with the client programmer, we've come to
    recognize the problem, but we don't know how to resolve it.
    Problem: the XMLParser doesn't follow href parameters in tags
    that refer to subobjects, which result in a #getProp Ref error.
    I have a web service method that will return a list of names
    and it returns the following XML response:
    &lt;?xml version=&quot;1.0&quot;
    encoding=&quot;UTF-8&quot; ?&gt;
    &lt;soapenv:Envelope xmlns:soapenv=&quot;
    http://schemas.xmlsoap.org/soap/envelope/&quot;
    xmlns:xsd=&quot;
    http://www.w3.org/2001/XMLSchema&quot;
    xmlns:xsi=&quot;
    http://www.w3.org/2001/XMLSchema-instance&quot;&gt;
    &lt;soapenv:Body&gt;
    &lt;getStudentsResponse soapenv:encodingStyle=&quot;
    http://schemas.xmlsoap.org/soap/encoding/&quot;&gt;
    &lt;getStudentsReturn href=&quot;#id0&quot;
    /&gt;
    &lt;/getStudentsResponse&gt;
    &lt;multiRef id=&quot;id0&quot;
    soapenc:root=&quot;0&quot; soapenv:encodingStyle=&quot;
    http://schemas.xmlsoap.org/soap/encoding/&quot;
    soapenc:arrayType=&quot;xsd:anyType[6]&quot;
    xsi:type=&quot;soapenc:Array&quot; xmlns:soapenc=&quot;
    http://schemas.xmlsoap.org/soap/encoding/&quot;&gt;
    &lt;multiRef
    xsi:type=&quot;soapenc:string&quot;&gt;Bob B
    Bobbly&lt;/multiRef&gt;
    &lt;multiRef
    xsi:type=&quot;soapenc:string&quot;&gt;Andy A
    Anderson&lt;/multiRef&gt;
    &lt;multiRef
    xsi:type=&quot;soapenc:string&quot;&gt;Carl C
    Carlson&lt;/multiRef&gt;
    &lt;/multiRef&gt;
    &lt;/soapenv:Body&gt;
    &lt;/soapenv:Envelope&gt;
    When it hits the getStudentsReturn element and tries to refer
    to a child node, and obviously fails.
    The server is Tomcat 5.5, using Axis 1.4 for web services. I
    can post a wsdl if desired.
    The web service is configured for rpc/encoded style.
    What is the way to get out of this particular jam? Neither me
    nor the client programmer have extensive knowledge of how Director
    (or the relevant Xtra) handles SOAP messages or parse them. I've
    stepped through the code and seen the XML parser object render the
    response into an object tree, but it doesn't respect the href's.
    I can provide follow up to any questions or comments about
    this problem.
    Regards,
    Jeff Vandenberg

    Hi Jeff,
    While I don't have much experience with web services, I'm
    about to
    embark on something that involves extensive use of them, so
    your post
    caught my eye.
    If I understand correctly, the href attribute associated with
    the
    getStudentsReturn node is supposed to "automatically" link to
    the
    following multiRef array. Is that correct?
    Assuming it *did* link correctly, how would this manifest
    itself? Is it
    not a matter of you the parser watching for href tags and
    resolving them
    yourself? Why would you not simply provide the multiRef nodes
    as
    children of the getStudentsReturn node? Is there
    documentation somewhere
    for the href attribute and this form of linking?
    Have you tried using the Flash Asset xtra for parsing, and
    does it
    behave "correctly"?

  • External WebService call from CAF Core returns Invalid soap message

    I am trying to perform the very simple action of calling a WebService from a CAF Core app service.
      1. I imported the WS (Axis Web service running on NW 2004s SP9 server) with WSDL (option 2 on import external service page).
      2. I then assembled the call in an app service method and invoke it.
      3. I made sure to configure the end point for the service and the method using the External Service configuration.
    When I execute the CAF core method using a simple Callable Object test client, I get the following error:
    com.sap.caf.mp.base.exception.EngineException: Invalid soap message received
         at com.sap.caf.mp.core.data.service.manager.wsdl11.SOAPToMessageValueConverter.processComplexTypeMode(SOAPToMessageValueConverter.java:290)
         at com.sap.caf.mp.core.data.service.manager.wsdl11.SOAPToMessageValueConverter.generateComplexTypeValue(SOAPToMessageValueConverter.java:179)
         at
    truncated.
    I have also captured the XML request/reponse trace using tcpmon :
    REQUEST:
    POST /NWTestExpressWAR/services/TestExpressService HTTP/1.1
    Host: 192.168.99.120:8078
    Content-Type: text/xml; charset=UTF-8
    Content-Length: 348
    SOAPAction: http://www.testsys.com/TestExpressService/getAvailableModels
    <?xml version="1.0" encoding="utf-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:GetAvailableModels xmlns:ns1="http://www.testsys.com/TestExpressService"/></SOAP-ENV:Body></SOAP-ENV:Envelope>
    RESPONSE:
    HTTP/1.1 200 OK
    Server: SAP J2EE Engine/7.00
    Set-Cookie: saplb_*=(J2EE11743000)11743050; Version=1; Path=/
    Content-Type: text/xml; charset=utf-8
    Date: Mon, 04 Dec 2006 02:19:39 GMT
    Transfer-Encoding: chunked
    Set-Cookie: JSESSIONID=(J2EE11743000)ID1261187150DB11296929644926762709End; Version=1; Domain=192.168.99.120; Path=/
    1f3
    <?xml version="1.0" encoding="UTF-8"?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soapenv:Body><GetAvailableModelsResponse xmlns="http://www.testsys.com/TestExpressService"><modelNames><name>Great Oak Manufacturing-January03 Test</name><name>PriceCheck-default</name></modelNames><errorMessagesReturn/></GetAvailableModelsResponse></soapenv:Body></soapenv:Envelope>
    0
    The only problem I can think off is that the transfer-encoding is marked as chunked which is causing the characters '1f3' and '0' to appear after and before the response and that this is causing the app to crash.
    192.168.99.120 is the server the hosts the WS. It is also a 2004s SP9 server. The client server that hosts the CAF core service is of the same configuration. 8078 is the port I redirect for tcpmon purposes.
    Could anyone shed some light on my problem?
    Thanks,
    Pratap.

    It looks like NW WS client cannot handle Transfer-encoding of chunked even though this is part of HTTP 1.1. What seems to be happening is that the NW WS client is creating a HTTP 1.1 request. The service (axis ws running on NW) seeing this is creating a HTTP 1.1 response w/ chunked encoding. However, the client cannot handle this encoding and barfs. The solution is to change the service to return a HTTP/1.0 response since NW cant handle HTTP 1.1.
    Pratap.

  • How to Call web service operation by creating plain SOAP message in client?

    Hi
    Thank you for reading my post.
    I have some questions about using web methods of a web service which i would be very gratfull if you could answer.
    I should implement a web service that should receive a file with some other parameters from client and another web service which should receive some parameters and return a file.
    I used a mechanism like the following one to handle the condition and it just works. But I have a problem, I need to create dynamic invocation and I must create soap message and send it to webservice (no IDE generated code)
    What i need is one or two tips or a sample that shows how we can send and receive files by web services.
    I want to know how we can create the SOAP message ourself and then send it to the web service endpoint and it call the web method and ....
    Imagine the following web method, How i can invoke it by creating soap message myself and sending it to end point.
    @WebMethod
    public String saveFile(@WebParam(name = "fileName") String fileName, @WebParam(name = "fileContent") byte[] fileContent) {
    // TODO implement operation
    return "Something";
    Another question is :
    Does this mechanism that i used to transfer files is OK?
    Is it optimized or there are some other ways to do this job.
    I should say that i put one week on handlers to use soap attachments and i get no result.
    So, Please let me know if you know or have some sample that show me how to do the above job.
    Thanks.

    Hi
    From NW04s SP8 you can create webservice systems from within VC , and you will have the option of adding a user and password to authenticate. You can find it at Tools>>Define web service system. You will see a check box url requires user and password.
    If for some reason you can not do it in VC then you should create the system in the portal and fill out the usermapping screens.
    Jarrod Williams

  • SAAJServet error when sending a SOAP message on 10.1.2

    Hi,
    We have deployed a server application in OC4J 10.1.2 with a servlet listening for SOAP messages (SAAJ 1.2). If we use Standalone OC4J with SSL enabled and HTTPS communication between client app and server, it works fine, but when we move it to an Application Server environment where client goes HTTPS to the frontend HTTP_Server and then AJP to the OC4J, the following exception appears on the application.log:
    07/03/27 17:48:36 application/gpm-0.1: Servlet error
    javax.servlet.ServletException: SAAJ POST failed Unable to internalize message
    at com.sun.xml.messaging.soap.server.SAAJServlet.doPost(SAAJServlet.java:212)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
    at com.evermind
    Any ideas what can go wrong here, or where else to look?
    Message was edited by:
    [email protected]

    The standalone OC4J is 10.1.3, sorry. Nevertheless, we include all the libraries we use (saaj and dependencies) in the appliaction .ear archive that we deploy in both environments. May be a configuration issue?

  • Error when posting a SOAP request

    Hi all,
    Facing error when posting the SOAP request and after entering the Server Username and password giving error that http not found and url
    The URL i follow is http://<hostname>:<port>/XISOAPAdapter/MessageServlet?version=7.0&channel=:BusinessSystem:PI_SOAP_CC
    can any one of you tell me in place of XISOAPAdapter what should i place?
    Please help me to post the SOAP request to PI server.
    Thanks in advance ,
    Manohar.

    Hi ,
    copy the same URL  (Endpoint that you had given while generating wsdl file) to the browser and chek the status. ( http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel)
    See the below URL for the same i.e. SOAP adapter...http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
    You should get response something like this '
    Message Servlet is in Status OK
    Status information:
    Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) bound to /MessageServlet
    Classname ModuleProcessor: null
    Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
    Lookupname for remoteModuleProcessorLookupName: null
    ModuleProcessorClass not instantiated
    ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
    ModuleProcessorRemote not instantiated
    This  is make sure that webservice endpoint is given correctly. Don't forget to give username and password for connecting to XI server. user should xiappluser .
    Ranjeet Singh.

  • Using PI 7.0 to handle moving a PDF document into a SOAP Message & sending

    Here is our situation.  We have the business writing all invoices for a day out of SAP to disk formatted as a PDF document; meaning, if the file is FTP'd from the disk of SAP to an NT server inside our firewall it is recognised as a PDF by Windows and Adobe.
    After we read the PDF, I need to add it as the payload to a SOAP message that will be sent to the web service of a partner out side our firewall.  They will extract the PDF from the SOAP Message and print the invoices... stuff the envelopes ... and post them. 
    I have been trying to use the file adapter to "pick up" the PDF and the SOAP adapter to send... Obviously, it is not working and I need some assistance.  I am new to XI, so any advice will be greatly appreciated.
    Thanks,
    Rich

    1.If the partner webservice supports SOAP attachments then you can send the required attachments from FileAdapter by selecting "Additional Files" check box in the File Sender channel.
    Check this link: [http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm]
    2.Else if this not the case i.e., you want to send PDF file stream as part of payload then you need to convert the PDF file stream to BASE64 format then map to one of the field of Webservice structure and then post using SOAP Adapter.
    Remember the webservice field length should be enough to carry the BASE64 string otherwise the target application will fail to process the data or it will process data by truncating. Also there should be extra funtionality in target webservice for converting BASE64 format to binary format(PDF file).
    But in general the webservices will support attachements. So you can go ahead with Case1.
    Thanks,
    - Gujjeti.

  • Soap Message in webservice

    Hello All,
    I have a SOAP request as below shich is sent from a client proxy(consumer proxy) in SAP.
    POST /blw/annehmen/2/0/ws/sendeWholesaleMeldung
    HTTP/1.1..Content-Type: text/xml;
    charset=utf-8..Content-Length:23711..accept-language: en..sap-language: E..soapaction: ""..accept: text/xml..
    sap-srt_id: 20090804/162628/v1.00_final_6.40/4A71719D8F44393BE10000000AAF5D7F..
    user-agent: SAP Web Application Server (1.0;700)..
    host: 10.13.21.619:12000..accept-encoding: gzip....
    <soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
      <soap-env:Header>
         <soap-env:Body>
              <n0:sendeWholesaleMeldungRequest xmlns:n0="http://wholesale.de/portal/blw/v2"
                            xmlns:prx="urn:sap.com:proxy:DWT::700:2008/01/11">
                   <n0:Meldung>
                        <n0:Meldungsnummer>Str 313</n0:Meldungsnummer>
                        <n0:Geschaeftsfallart>string 314</n0:Geschaeftsfallart>
                        >
                   </n0:Meldung>
              </n0:sendeWholesaleMeldungRequest>
         </soap-env:Body>
    </soap-env:Envelope>
    I want to send the type of the complex type Meldung like
    <n0:Meldung xsi:type="swm:MeldungENTMType">
    in the SOAP message that i sent.
    Can anyone please let me know how this could be achieved.

    No cross posting
    Read the "Rules of Engagement"
    Regards
    Juan

  • How to send SOAP message with attachment?

    Hi Experts,
    How do I simulate to send a SOAP message with an attachment? Can I use XMLSpy?
    Please help.
    Thanks,
    Shobhit

    Ravi,
    With the generic SOAP client, it asks for the http based wsdl file location. But my wsdl has been generated by XI and I have the file stored on my desktop.
    Something to do with the path http://zpidd01:8030/XISOAPAdapter/MessageServlet?channel=NetworkPartners:NP_Order_BS:NP_SOAP_Sender_CC ??
    Stefan,
    my scenario is to send a SOAP request with attachment and post the attachment in ECC through the ABAP server proxy.
    WebService Client -
    SOAP----> XI -
    ABAP PROXY CALL ---> ECC
    Need further assistance from both of you how to achieve this scenario.
    Thanks,
    Shobhit
    Edited by: Shobhit Swarup Mathur on Jul 24, 2008 4:34 AM

  • How to view the SOAP message in a web service call + Urgent

    Hi All,
    Iam trying to test a web service call(Iam using CXF). But I need to view SOAP message sent to web service or need to debug the web service call. Please help me on this regard with example.

    Yes. to find any tcp monitor, define a listen port number, task host and port number, changing your request to listen post, then you can monitor TCP/IP like
    HTTP/1.1 200 OK
    Set-Cookie: JSESSIONID=7A00BD65EF7516AD8947359A25C4D98B; Path=/ComponentName
    Content-Type: text/xml;charset=utf-8
    Date: Wed, 20 Oct 2004 15:45:03 GMT
    Server: Apache-Coyote/1.1
    Connection: close
    <?xml version="1.0" encoding="UTF-8"?>
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <soapenv:Body>
    <ns1:testObjectResponse soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns1="urn:ComponentName">
    <testObjectReturn href="#id0"/>
    </ns1:testObjectResponse>
    <multiRef id="id0" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="ns2:MyObject" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns2="urn:ComponentName">
    <name xsi:type="xsd:string">Set Name</name>
    <value xsi:type="xsd:string">set Value</value>
    </multiRef>
    </soapenv:Body>
    </soapenv:Envelope>
    Lixin

  • I need to secure SOAP message sent into SOAP adapter, how to?

    Hi guys,
    My scenario uses SOAP and I need to secure this SOAP message sent into SOAP adapter. As I have read in the documentation, HTTPS is possible only on the SOAP receiver adapter. But my is SENDER.
    COuld you help me please, how to solve it? Or post some link? Or, if you have your own approach, to let me know?
    Thanx, Peter

    Hi,
    you can use SSL with the sender adapter. Please see the extract of the SOAP Adapter FAQ (Note #856597) below:
    <b>Q:</b> Can I use SSL for my sender adapter?
    <b>A:</b> Yes. Normally, the SOAP adapter servlet runs on the engines HTTP port. But you can activate the engine's HTTPS port so that this servlet can receive messages sent to the HTTPS port. See the documentation about the J2EE engine's security configuration.
    I am afraid, I haven't yet tried this myself, so you will need to consult the J2EE documentation.
    Regards,
    HC

Maybe you are looking for

  • Can you access/use multiple apple ID's on one device?

    Hello, In our family we have been registering everything (ipods, iphones and computers) all under one apple id. We have made purchases with the family apple id which we have been accessing on multiple devices. With everyones different needs I am wond

  • How to collect JScrollPanes into a Container variable? (urgent...)

    Please help me in following problem: I can collect succesfully one JScrollPane into a Container variable allComponents and then show this Container in application window. However, I would like to collect several JScrollPanes into this same Container

  • [SOLVED] pure-ftpd no longer works after system update

    Hi, I made a system update today and since pure-ftpd doesn't want to start it just display "[FAIL]" but I don't have any error message. Is it possible to see the the error log of pure-ftpd ? Do you have any idea of how getting it working again? Thank

  • Flex Time error: Too many disk I/) tasks (Elastic Audio)...

    I've been using flex time to take a sample in straight time and make it swing, but I've been having playback issues. I get two different error windows 1) Extreme compress factor detected during playback (Elastic Audio) (-10025) and 2) Too many disk I

  • I took a picture...where is it?

    I was editing my brother's contact info and wanted to take a picture of him. I tapped the blank "Add photo" box in order to take a picture. I snapped it and now it's set that to be his photo. Now I'd like to somehow get access to that photo to stick