Posting on commitment item when PO is created in SRM

Hi,
We use modules SRM and PSM - Funds Management.
When we create a Purchase Order (PO) in SRM, the posting in FM on commitment items is different from when the PO is created in ERP.
Example 1 - PO created in MM:
PO
FM - value type 51 (amount -1000)
GR/IR
FM - value type 51 (amount 1000)
FM - valute type 54 (amount -1000)
The value type goes from 51 to 54.
Example 2 - PO created in SRM:
PO
FM - value type 51 (amount -1000)
GR/IR
FM - value type 51 (amount 1000)
But here it doesn't convert to value type 54 for commitment item. Therefore we can't display it in for actual FM values.
Does anyone know why it behaves differently for commitment item when the PO is created in SRM, instead of MM?
With regards,
Åse

Hi Åse,
There should not be any difference. I had a project with SRM and all FM documents were created properly. Do you refer to the fact that FM document is not created ( in FMIFIIT table) or you just do not see it in PO history? For the latter, you could look at this note 857761...
If the FM document is not created at all, I'd open an OSS on that after checking in OFUP that GR updates FM.
Regards,
Eli

Similar Messages

  • Is there a way out by which commitment item can be created in all company

    Hi  All
    Is there a way out by which commitment item can be created in all company
    codes at one go? or any other  way to do the same.
    Advance thanks
    reddy

    Thanks for your advise, 
    I mean to say  ""  GL Accounts can be replicated in all company codes using the transaction code FS15. Commitment item is created using transaction code FIPOS. The issue is as the GL can be replicated in all company codes at one go but the commitment items are to be created one by one for each company code. For creating commitment items in all company codes from x to z ", involves considerable amount of time to create GL Account completely.""
    thanks in advance  any how  assigned points

  • How to give commitment item while posting tax

    how to give commitment item while changing tax %.

    HI
    Commitment Item will be derived from the G/L account. You need not enter the commitment Item. Whenever u create a G/L account go to FMDERIVE and assign the G/L account to the commitment Item.
    Hope this helps. If it helps plz assign points.
    Regards
    Rajaram

  • Reassignment of commitment items & fund centers in open PR, PO & MIGO docs

    Hi
    We  are using Fund Management (BCS) in our system since last one year. Now starting from next fiscal year ( 01.04.2009) we want to replace some of the existing fund centers and commitment items with either newly created fund centers & commitment items or existing ones. We will be changing FM derivation strategy too.
    How should one go about it? Whats should be the strategy and procedure for replacing the commitment items & fund centers in open PR, POs & other open document. I know there is option of  reassignment of fund centers and commitment items using reassignment derivation strategy. But I am not clear about the steps involved and strategy one should use while doing so.
    Pawan

    Hello Pawan,
    You can also combine reassignment with closing operations (Carryforward with reassignment)
    Pls check the link, under 'Closing Operations -> Derivation Strategy for Reassignments with Closing Operations'
    By doing so, you can carry forward for example open PO's assigned to given account assingment in 2008 to a new account assignment in 2009
    Reassignment programs RFFMCHAN and RFFMCHAT are normally used when Wrongly assigned documents or changes in the responsibility areas of the functional assignment necessitate account assignment changes within the year, or when PSM-FM is implemented later than other components.
    I hope this will help
    Kind regards
    Mar

  • Fund managment exceeding the budgeted and committed items

    Dear All,
    In my client place we implement the fund management.  we create the department wise fund center and related committed items.
    For example for the Fund center Administration Expenses- Committed item is Advertising expenses.  When ever i made the payment to that particular expenses if i exceed the budgeted amount it will though error .
    Like this i am getting for the some of the fund center and commitment items. I am having department wise fund center and commitment items list of 50 under that for  25 fund center whenever i exceed the budget it shows the error message for the some of the fund centers it not showing any warning message. and also allowing to make entries so my fund center report is showing negative values. so please guide to solve this issue.
    Regards
    girija

    Dear Alex,
    in my client in Availability control limit
    they send for
    MSL  MSL001  pb selected  proceed ++ Action 1  usage % 90
    Msl   Ms002                                              Action 3 usage % 100
    it is correct or not  pl guide to solve this issue for half of  the  fund center and commitment item when exceed the budget it is through error but for the remaining fund center is is accepting.
    Regards,
    girija
    Edited by: k.r.girija devi devi on Nov 13, 2009 5:14 AM

  • HOW TO ENABLE ITEM IN RECEIVABLES TO CREATE TRANSACTION IN R12 VERSION

    I am Using R12
    I created one Item In Inventory for operating Unit x1,
    and for that item i enabled the options
    Invoicing
    ---> Invoiceable item
    ---> Invoice Enabled
    Inventory
    ---> Inventory Item
    ---> Stockable Item
    ---> Transactable Item
    When i am creating a new Transaction in X1 operating unit i am not getting the item in the LOV of item. i am getting other items in other operating units but not in X1 operating unit.
    How to enable that item for transaction.
    I Have To Change any Profile option.
    Are Any setup Issue.
    Thanks In Advance
    Prince

    Hi Prince
    You need to post this to an Apps specific forum.
    regards, Tim

  • Distribution of commitment Item via ALE

    Dear All
    We have fund management active and hence we need to assign a commitment item in a GL.
    We have two seperate SAP instance and have to transfer GL master from one instance to another via ALE. For this we will also have to transfer commitment items before we can create GL master in another instance. I am using standard message type  COMM_ITEM for this. Can someone please help me which T-code/Program should be used to send commitment items from one instance to another?
    Thanks
    Sanjeev

    SE 38
    RBDSE_COM_ITEM
    RBDSE_FUNDSCENTER

  • BADI me51n : commitment item chanes in me51n by user

    Hi gurus,
    i have a requirement that user will maintain commitment item in Ztable w.r.t  item categeory 'U'.
    if the same commitment item is not displayed in the account assignment tab then it should throw a error.
    i used method IF_EX_ME_PROCESS_REQ_CUST~PROCESS_ITEM to do it and is throwing the relevant error.
    But when user is entering the correct commitment as maintained in ztable i need to jump the error which i am not getting how to do since i am getting the commitmnet item from SKB1 table .
    how to get the values of commitment item when user is entering the correct one ??

    Before using macro mmpur_message_forced to raise the error, did you pass the metafield identifier thru  macro mmpur_metafield (from type pool MMMFD it should be mmmfd_commit_item)
    Regards,
    Raymond

  • Commitment item - Grant Management

    Hi,
    my customer wants to activate Grants Management. Funds Management is already active.
    The first task of project is a review of commitment item because actually few commitment item are used.
    I have to split one commitment item in more commitment item.
    Do you know how I can migrate old document with one commitment item in one with more commitment item when I active Grants Management
    Thanks
    Regards

    Hi,
    You should either define a strategy (FMYC), defining which FM address should be transformed to a new one and execute mass selection of documents (FMCG) and then reassign (FMCT). Or you can do it for particular documents with all consecutive documents via FMCB and then reassign (FMCT).
    Regards,
    Eli

  • How to derive commitment item and fund center when create PR from MRP.

    Dear Experts,
    No commitment item and fund center are derived when I create PR from MRP. I have to run transaction fm_mrp_pr to derive commitment item and fund center. However, I want to derive FM assignments during creating PR through transaction MD04. I plan to use user-exit to derive FM assignment while PR is creating from MRP. Which FM bapi, functions,etc... can I use in user-exit to derive FM assignment? Do you have an idea?
    Thank you in advance,
    Sibel

    Hi Sibel,
    Please check if note 1247722 and 1127135 are applied in your system. If not, kindly apply it and retest your issue. It should resolve it.
    Kind Regards,
    Vanessa.

  • Error in Posting Service Entry Sheet - FI 311 No Commitment Item in Item 1

    Dear All,
    We need a suggestion/solution for the following problem :-
    Our customer had raised purchase orders for services in may 2010. The following critical entries were made in the purchase order.
    Account Assignment Category was P-Project
    The WBS element was entered as the Accounts Assigment Category was P.
    The user was entering uncoded services. Hence the material group for that service which had G/L a/c tagged to it was entered. But the G/l code was not populated in the purchase order by the system at that time of creation of purchase order and subsequently the user was able to save and release purchase order.
    The user was able to post Service Entry Sheet and generate accounting entries in june 2010.
    Additional service entry sheets are required to be posted for the remaining quantites. The client has urcated the SES process into two parts.
    1. Through T-code ZML81N the end user is able to create and save the SES.
    2. Through T-code ML81N the Head of Department is able to approve and post the SES which results in generating of accounting entries.
    Presently the user is able to create SES with tcode ZML81N. But when the HOD tries to approve and post the ses we get the error.
    FI 311 - No commitement item maintained in Item 0001 in P220 (company code).
    Fund Management is active in this company code and all settings related to Funds Management and FI have been checked by respective consultants.
    The end user is not having any problems in processing SES for current Pos. But he is not able to create SES for the POs created in May, 2010 for which the user has already created and posted more than one SES against the same POs.
    We have already escalated it to SAP.
    Thanks in advance
    Anil Shanbhag

    Hi,
    Use T.code:FS00 and check G/L account 280000 is there in your company code or not.
    If yes, check its nature(type/description,control data , cretae bank/intererst tabs)of G/L
    NOTE: Also check and compare the field selection between Movement type 101 & your G/L account 280000 in SE38 t.code with  Program RM07CUFA
    Regards,
    Biju

  • Commitment item not picking while MIRO posting for Service entry sheet

    Hi to all,
    We have activated Fund Management in middle of the year where there were purchase order completed to till MIGO. When we do MIRO now system unable to pick commitment item from FMDERIVE.
    We have created Commitment item as 50/3 combination ( No budget check ) and assigned to GR/IR clearing account.
    We also activated trace in FMDERIVE and checked MIRO  posting and found that derivation is working properly but while posting it is triggering error.
    Some one advise me as it affected daily activities.
    Thanks & Regards,
    Y.Kiran Babu

    Hi,
    For the purchase order completed and the related MIGO created before FM was implemented, you need to run FMCN and FMCT.
    I will explain to you in detail all the information related to the matter.
    First of all, it seems to be in your PO that does not have FM account assignment (funds center and commitment item) in account assignment TAB. In addition, the error occurs usually also because in your SES the FM account assignment is missing.
    For GR and IR documents FM always takes the major part of the FM account assignment from the PO.
    You can fill these account assignments by using the programs RFFMCHAN/RFFMCHAT.
    FMCN/FMCT must be run for the first document in the chain, which is the PO in case you don't have a PR assigned to this PO or an earmarked fund document. If you have PR's assigned to the PO's please run FMCN/FMCT for the PR first.
    When executing the FMCT transaction, ALL documents selected in one group must be tested and processed successfully TOGETHER. If any one document fails, the ENTIRE group is shown as in error.
    Therefore, first step is to ensure that the reference PO has a valid FM account assignment and is updated in FM. This should be done by FMCN/FMCT and subsequent posting with FMN4N (see reconstruction note 189761).
    The SES itself might not be changed by FMCT. Therefore you should fulfill the FM account assignments in SES manually or with a custom program.
    Please check also your table FM01X. As an alternative solution, you can enable one of these flags in table FM01X, depending on your business needs:
    FLG_PO_PROTECT if you want to always inherit the fm account assignment from the reference PO and therefore skip FMDERIVE
    FLG_FMDERIVE_FORCE if you always want to force a call to fmderive in all cases
    FLG_SES_OVERWRITE in services, if you wish to overwrite the account assignment from the SES with the derived values from FMDERIVE.
    You can find more information about it in text part of notes 1146677 and 923672.
    FMDERIVE is skipped for GR/IR lines and the Commitment item is inherited from the PO regardless of whether or not the GR/IR line is FM relevant. This is SAP standard behavior.
    If you want to force the Commitment item to be derived from the GL account for the GR/IR line, you can use the FLG_FMDERIVE_FORCE flag as described in note 923672.  This will allow FMDERIVE to be called for these lines.  Please be sure to fully test this to ensure that FM account assignments that you do not want to be overwritten are not incorrectly derived.
    Bear in mind that for PO´s that does not have account assignment you should run FMCN/FMCT + FMN4N. For this you would need to check the flags and which one is more related to your needs. With the appropriate flag marked in FM01X (active with X) you should be able to run the transactions without any issue.
    Based on note 189761, after doing all the previous suggestions and the issue does not appear anymore, I suggest you to run the following programs:
    1) FMN0 for this PO/GR to see if the actual values are correct in FM table FMIFIIT (FM actual line items).
    2) Run report RFFMRC04 (transaction FMAF). The reconstruction programs always update the totals records in Funds Management. Therefore, you do not normally need to reconstruct the totals records.  However, if you suspect there are data inconsistencies in the totals records, you can analyze and correct these using the report RFFMRC04 (transaction FMAF).
    If you correct the totals records, you must do this before you reconstruct the assigned values (see below).
    3) Run reconstruction for AVC
    You can also reconstruct the assigned values using the following tools:
        o  Report BPINDX03 (transaction FMBV) for former budgeting
        o  Report RFFMAVC_REINIT (transaction FMAVCREINIT) for the Budget
           Control System (BCS)
    Make sure that no other system activities (postings, budgeting) are carried out during a reconstruction (commitment/actual or assigned values).
    I believe that this resolve your inquiry.
    Best Regards,
    Vanessa.

  • How to Change financial trasnactin for commitment item for which no trasnaction has been posted

    Hi ,
    1.
    \We re in process to Go live for he FUND Management module for Power generation business, while we create all  FM master data and budget structure we found a mistake in NONBUDGET commitment items. we wrongly mapped financial transaction 30, while changing it to 40 system showing following massage,
    Field "Fin.transaction" cannot be changed
        Message no. F6288
    Diagnosis
        You can no longer change the entry in field Fin.transaction as commitment
        item NONBUDGET in FM area SAPL and fiscal year  has already been defined
        as a budget object.
    System Response
        Field Fin.transaction is not changed.
    2. when we try to delete the commitment item system showing following error
    Commitment item NONBUDGET in FM area  and Fyear SAPL defined as a budget
    object
        Message no. F6206
    Diagnosis
        The commitment item NONBUDGET in the FM area SAPL and fiscal year  was
        defined as a budget object.
    System Response
        The chosen action was not executed.
    Procedure
        Remove the indentification Budget object in the budget structure.
    As per above error we check the following details
    1. FM deriver - Removed NONBUDGET from all the rule
    2. There is no Budget/ Posting in FM9k
    3. There is no activation of budget ( no golive)
    4 There is no data posted with the commitment Items

    Hi Jeetendra
    Try deleting the budget structure using FMBSBO_DEL.
    Thanks
    Shyam

  • How update Fund Center and Commitment Item after posting

    hi Experts,
    Funds management was activated during the year and hence there are few open items saved without capturing Fund Center and Commitment Item. When i tried to clear these open item i get the following error
    Line  in document xxx xxxxxxxxxxxx   does not contain any commitment items
    Is there any program which i can use to update derivation to the already posted line item
    Thanks in Advance

    Hi,
    Solutions proposed by Alexey are good if FM document was created for the FI documents in question. If, however, no FM document was created, reassignment process won't help. You can try FMN0 transaction after creating a derivation rule in FMDERIVE for these documents, but I cannot confirm that it would be sucessful as FMN0 transaction is not perfect.
    The solution could be updating FI tables (BSEG/BSIS/BSAS) with FM assignment (fund centre/commitment item) and only then running FMN0 transaction. In this case, FM document will be created and you'll be able to process the items.
    Regards,
    Eli

  • Commitment Item-Error while posting GR

    Hi MM Gurus
    I am tryin to post GR without PO for movement type 101.
    and already customized settings for Auto PO allowed for movement type 101.
    When i m tryin to save GR, it is showin me error
    " No Commitment Item Entered in item 00010 1000 379999"
    i dont knw how to solve this error..
    Error description Says, someone has activated funds management, cash budget management, or project cash management, therefore i must have to enter commitment item in all involved company code.
    so culd u pls let me knw whr exactly i have to enter this details for commitment item.
    Thanks a lot..
    Regards
    Jignesh

    Hi,
    This is due to lack of budget against the concerned item. Check the same against the commitment item as per the valuation class assigned for the item.This can be viewed in TCode FMRP_2FMB4002 .Ask your FI team for allocation of budget.
    Dhruba

Maybe you are looking for

  • Sync Services eliminated from Mavericks - can no longer sync contacts

    I clearly made a big error updating to Mavericks. I only discovered after the installation that Mavericks no longer supports Sync Services, which was critical to my ability to sync my personal contacts and calendars to all of my devices. In the absen

  • IPad doesn't recognize PayPal

    I bought apps from the Apps Store on my iPad2 for 2 or 3 days and then it suddenly began refusing to download even free apps.  The error message states that my iPad2 doesn't recognize PayPal.  I tried setting up a credit card as my iTunes payment opt

  • Direct G/L account tab page in MIRA

    Is it possible to enter GL accounts in MIRA screen? I see it in only MIRO screen.

  • Template file - EPM.hdbdd

    Hi Experts, I am not able to find the demo file EPM.HDBDD in the demo content. Can you please guide and provide the sample code of all Various Tables in 1 file. Thanks

  • Talking to a real live person possible?

    So I'm having trouble starting up my Time Machine, and nothing on here addresses my issue. Is there an actual way to talk to someone live at Apple without having to fork over more money? I cant seem to get the online thing to get me to talk to someon