Posting period locked in controlling area

Hi
I am getting error while closing order ( posting period is locked in the controlling area xxxx for the period 11 in 2007)
i am able to post periods up to 10
how to rectify this
regards\
prasad

Hi,
See the tcode OB52 and OMSY
Regards,
Sankar

Similar Messages

  • Error : profit center is locked for controlling area

    Hi Experts
    profit center is locked for controlling area. Like this error is comning while doing MIRO, excise invoice. Please let me know the solution. Profit center mentioned in material master is different.

    Dear,
    This profit center is locked in its master under Indicators tab. Use transaction KE52 to unlock it if you want.
    Your concern to Profit Center being picked up is different then Material Master then use transaction OBBH and notice the substitution assigned to your compay code for call up point 2. Then use transaction GGB1 and check any profit center derivation is done.
    Regards,
    Chintan Joshi

  • Posting Period Locked

    Hi,
    While performing Overall completion confirmation(IW42) in PM,I get error msg "Posting period is locked for 009 2009".
    Please let me know how to resolve this issue.
    Regards,
    Shanmuga

    Hi,
    Try out T code - MMRV, it will help you to open previous closed posting period.
    Or check,
    whether there is any authorization mantained for that.
    Check thru :
    set authorization to users who are allowed to change the status (authorization >>> Administration >>> system Initialization >>> Posting Period >>> change period status)
    2)  authorization to users who are allowed to change the status (authorization >>> General >>> Period Status: Unlocked Except Sales or Period Status: Closing Period)
    3) Change kinds of date in detail of posting period to meet your requirement.
    Dhara.

  • Posting in Controlling Area Currency

    Hi
    We have the following Scenario
    Actual Balance in WBS Elements X  is 15000.00 AUD (Object Currency) and 12000.00 USD(Controlling Area Currency)
    We have transffered the balance from X WBS Element to Y WBS Element by netting of the Object Currency to Zero.
    Resulting that the revised balance as below :
    Object Currency = 0.00 AUD
    Controlling Area Currency = 1000.00 USD.
    We like to net of the Controlling Area Currency also in WBS Element X.
    Is there any way of posting the same in Controlling Area Currency Alone.
    We want the solution urgently.
    Thanks and Regards
    Ramesh KR

    thanks for your reply.
    But there is no Tcode with Fbb0. Can you provide me the correct Tcode.

  • BDC or BAPI for Actual period Locking

    Hi,
    Thank You very much for reading this query.
    I have to deveop the SE38 program with a selection screen which should contain following fields.
    1) Controlling Area
    2) Fiscal period,
    3) Fiscal year
    4) Version,
    5) Actual/Plan
    6) Lock/Unlock
    7) Business transaction.
    My requirement is if user creates a variant by giving proper values and runs the job, it should lock the given the business transactions.Functionally this task will be done by functional people in OKP1 transaction code (CO-Controlling.)
    Please suggest me if any BAPI is there and shall I go ahead with BDC.
    The problem if i go with BDC is, some times user may scroll down the table control depending on the given values. So how to satisfy this condition.
    Thanks and Regards,
    K.krishna Chaitanya.

    Hi Krishna,
    I know this is an old post, but in case someone else comes across it while searching for a solution to this same problem (as I did), Sanjeev Kumar has written a document, Automate Period Opening in SAP which, among other things, discusses using report RKCOOKP1 (Set Period Locks in Batch) to set or delete period locks in controlling (OKP1). In addition to scheduling a job for RKCOOKP1 as the document demonstrates, you could also call RKCOOKP1 programmatically with SUBMIT report ... AND RETURN.
    Cheers,
    Amy

  • OKP1 - period lock on company code level

    Hi all,
    I wonder if anybody can help me with this issue.
    Is there an alternative transaction (or any other way) to OKP1 for locking period only on company code level?
    In standard, OKP1 locks on controlling area level.
    The only way which comes on my mind is to set a new validation rule.
    Thanks a lot
    Regards
    Peter

    Hello Peter,
    we are very interested in this issue.
    For our project we also plan to have an assignment from 7 company codes to one controlling area and we also want to control the closing by company code.
    Now we read your thread about this issue and try to work out how you have designed the validation step (OKC7) to check if one business transaction is only allowed for postings in a single/specific company code at the time.
    We are looking forward to your reply!!
    Kind regards
    Udo

  • Unlocking of periods in CO ( Controlling )

    I am trying to settle an Internal Order to Asset Under Construction through T Code - KO88. I am getting the following error.
    Transaction Actual settlement has been locked
    Message no. KI806
    Diagnosis
    Business transaction Actual settlement has been locked for controlling area/version 2000/000 in fiscal year 2007, period 8.
    System Response
    The function cannot be executed for locked periods.
    Procedure
    Limit processing to the periods which are not locked, if possible.
    If locked periods are necessary for processing, unlock them.
    Please guide me for unlocking the CO Period so that this Internal Order can be settled.

    Thanks
    But in OKP1, there are large no. of transactions which one should be selected for the settlement from Internal Order to Asset under Construction.
    Regards
    Dharmveer

  • Can I change posting period variant after go live?

    Hi,
    I wonder if it is possible to change posting period variant after postings are done in the system? We are now having the same posting period variant for all company codes but I want to split it and have separate, one per company code. Is that possible now?
    Best regards Lisa

    Hi,
    Yes, it should be no problem if the fiscal year remains the same.
    Regards,
    Eli

  • Open and close posting period authorization control TCODE: S_ALR_87003642

    HI All,
    Is there any chance to control the user to open and close another company code posting period variant in TCODE: S_ALR_87003642.
    In our system we are using the same client for different countries. So user can able to change the other country company code posting periods.
    We would like to control either on the country (or) organizational unit(company code) (or) posting period variant so that user can only open/close  their country / company code posting periods.
    Our present authorization role for open and close posting period contain the auth.Obj. : S_TABU_DIS.
    Please share your knowledge if you come across this problem..
    Thanks in advance..

    Hey Sandhya,
    Congratz, this can be done using linbe item authorization with the object S_TABU_LIN.
    Field ORG_CRIT - Value 02
    Field ORG_FIeld1 - Value ZT001B
    We have successfully done it in our client.
    You need to contact your BASIS consultant for this.
    Thanks,
    Nitish

  • Posting Period is locked at the time of CO11

    I am facing an issue in CO11..system is giving mesaage that Posting period in close.
    I hav echecked FI & MM Period is open. What could be the reason...
    Vivek
    Moderator: Please, avoid asking basic questions

    Hi
    Are you posting in previous period? If yes, then check in MMRV that back posting is allowed to previous period or not
    If you are posting in current period, and you have already ensured that FI/MM periods are open - Then check OKP1 for Actiivty locks
    Regards
    Ajay M

  • Posting Across Controlling Areas

    Hi,
    We have 3 Controlling Areas for 3 geographical regions. US, EU and APAC. However, now we want to move the valuated stock items from one plant in the US region to another plant in EU region. Obviously we do have some cost associated with these materails and also, some transportation costs as well. Do we know how we can get this sorted out in SAP please. SAP OSS note clearly says that the cross-controlling area posting in SAP is not supported.
    Any inputs please, always appreciated.
    Thank you,
    Subash Krishna

    Hi,
    I am not sure what you meant by that. I have 4 controlling areas linked to the same operating concern. The movement of valuated materials with their transport charges is between regions (Each region has separate controlling area). Somewhere on one OSS note we read that SAP does not support cross-controlling area posting as it is against the normal design of the SAP system. Are you saying that the derivation in CO-PA would help to get over this limitation?
    Please could you throw some more light on this issue?
    Thank you,
    Subash Krishna

  • Allowing trasaction currency post to the Controlling area

    Hi All,
    My Exisiting Configuration is as follows:
    local curr: MYR
    CO AR CURR: MYR (ALL OTHER COMPANY CODES ARE ASSIGND TO THE CO AREA)
    OBJECT CURR:MYR,
    NOW WE ARE RESETTING THE COMPANY CODE, AND CHANGE CONFIGURATION  AS FOLLOWS
    LOCAL CURR  : USD
    SEC PARAL CURR: MYR (HARD CURRENCY)
    CO AR CURR  : MYR
    BUT THE OBJECT CURRENCY IS MYR,WHEN I POST THE TRANSACTION IN USD THE "ERROR COMES UP OBJECT CURRENCY MAINTAINED IN MYR"
    IF I WAN TO MAKE THE CONTROLLING AREA TO ALLOW THE TRANSACTION CURRENCY WHAT IS THE SETTING TO BE MADE,(THE SYSTEM IS IN PRODUCTION)
    YOUR INPUT NEEDED ON THIS ........
    REGARDS
    RAJ

    Hi,
    Go to maintain controlling area. Double click it then in assignment control maintain " cross - company-code cost accounting. Then try to give controlling area currency as 20.
    Now you try to post the document in USD. If it does not happen...no other clue...
    That is why at the time of original implementation among many things Currency type & currency also to be discussed and frozen out.
    Regards,
    Velumani

  • Posting periods for futere are opened

    By mistake future posting periods are opened by me in MMPV.How to reverse ? What is the way to reverse ?

    Hello
    you can do it with two ways
    1. change data in table MARV ( NOT SUGGESTABLE)
    2. SAP NOTE AVAILABLE
    Refer SAP Note No. 487381 for more details.
    As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
    Again go to MMPI enter company code, period and year and execute.
    lAXMAN

  • Posting periods for controlling

    Dear SAP Gurus,
    Please provide any documentation or configuration for posting periods for controlling its a urgent requirement i have to due within a week
    regards
    Rama Mohan Bangaru

    Hi,
    T.Code: OKP1.
    Posting period in controlling is to maintained in the same way as we do in FI.
    Please also ckeck out the following link:
    http://help.sap.com/saphelp_erp2004/helpdata/en/02/30793485231774e10000009b38f83b/frameset.htm
    Hope this helps.
    Please assign points as a way to say thanks.
    Regards,
    Message was edited by:
            Harish Singhania

  • MIGO Posting problem  controlling area

    hi Gurus,
    In doing a migo i got the error message as below as
    ( Control indicators for controlling area 2681 do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2008 for controlling area 2681.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area 2681, fiscal year 2008 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year.)
    please help me out
    Regards
    Maashish

    Go to OKKP Controlling area and Select your Controlling area 2681 and Activate the same and Save.

Maybe you are looking for

  • Looking up a EJB 3.0 Session Bean in JSP Scriptlet

    Hello There, Somebody please enlighten me. I have a bean named a.b.MyBeanextending local interface a.b.MyLocalNow I want to use this bean in a JSP (Maybe just for fun, but the point is I am not using resource injection). So the question is, What is t

  • Skype on Mac crashes after a few seconds

    Hi, so a couple weeks ago I was trying to use skype and it just kept crashing after a few seconds of me opening it. I've tried reinstalling it, updating it, updating my computer, nothing has worked. If I'm actually able to call someone it's fine, but

  • Storing binary data to a file......

    Hi Friends, I am trying to make a webapp in which users can upload Videos and I can store that videos on the server. I have this bit of code:     public ActionForward execute(             ActionMapping mapping,             ActionForm form,           

  • Problem with preview of iPhoto book cover

    A friend has assembled a book in iPhoto and we have previewed it by going to File-Print and choosing to open a pdf in Preview. The pdf preview looks fine except for the front cover in which the image and text appear enlarged and shifted, cutting off

  • Multiple T Codes to check User Authorization

    Dear All, I had requirement to check the list of tcodes assigned to the users. Here the input is multiple tcodes(i.e, more than 10 tcodes). Please provide your inputs / suggestions in this regard. Regards, Venkatesh