Posting-problems - WAS: avi.dll and pop-up

Hi everyone!
I recently posted a question regarding the handling of a dll here and was
asked to post the dll and the calling-code here, so help can be provided.
However, i tried several times to post the dll and code, but was rejected by
the server every time (i tried different servers, a single post, answering
to my own post, nothing worked). Is there any trick how i can post with an
attachment???
Thanx.
Martin Klein

Testing attachment.
Attachments:
test.txt ‏1 KB

Similar Messages

Facebook timed out while writing a post. Any attempt to open FB, now shows post that was in progress and immediately crashes app. Cannot clear timed out item. Have power failed and done warm reboot on iPad.   Is Delete/Reinstall only option?

Was writing post, as part of sharing article from my newsfeed.   While writing, Facebook timed out. Display cleared. App recycled and returned to newsfeed. This has happened previously and for all purposes, the original post, since it had never been "loaded" onto FB servers effectively was deleted from iPad memory. That appeared to be the case yesterday; as I was able to continue reading, sharing and commenting on other articles.
Later, as I was shutting iPad down for the night, scrolled through open Apps and discovered the original FB window was still "open" I'd apparently been working on a 2nd or mirror version of the app. Attempting to access the original page; it opens, but I am unable to "interact" with the display/app, pressing "cancel" on my original post has no effect. Within 5-6 seconds FB crashes.
I power failed the iPad, left it over night and today am encountering the same problem.   Tapping FB icon, brings up the post that was timed out. It displays for 2-3 seconds max, then original article and partial post disappear. Newsfeed appears to be loading as that and contact columns are visible in light font indicating they are preparing to load.   2-3 seconds, that vanishes. Am left with blue header band, spinning wheel indicating it is trying to communicate or process something.   2-3 seconds and then screen goes black and I'm returned to my app desktop.
If I immediately tap icon to reopen I get white screen, with blue header band.   2-3 seconds, black screen, back to app desktop.   If I wait 2 minutes, I get the full shared article, partial post as described above. I've confirmed in the problem log that this is failing in Thread 0 and showing up as system crash.
Based on feedback to somewhat similar FB problem I found in forum; in addition to doing power fail. I also did warm reboot (Home and Sleep keys) in hope app would reboot along with ios. No change.
At this point, I'm assuming my only viable option is to delete the app and reinstall it from App Store. Easy enough to accomplish. But wanted to see if there were any other recommendations, or whether anyone else has experienced a similar failure with FaceBook.
Thanks for your assistance.

Was writing post, as part of sharing article from my newsfeed.   While writing, Facebook timed out. Display cleared. App recycled and returned to newsfeed. This has happened previously and for all purposes, the original post, since it had never been "loaded" onto FB servers effectively was deleted from iPad memory. That appeared to be the case yesterday; as I was able to continue reading, sharing and commenting on other articles.
Later, as I was shutting iPad down for the night, scrolled through open Apps and discovered the original FB window was still "open" I'd apparently been working on a 2nd or mirror version of the app. Attempting to access the original page; it opens, but I am unable to "interact" with the display/app, pressing "cancel" on my original post has no effect. Within 5-6 seconds FB crashes.
I power failed the iPad, left it over night and today am encountering the same problem.   Tapping FB icon, brings up the post that was timed out. It displays for 2-3 seconds max, then original article and partial post disappear. Newsfeed appears to be loading as that and contact columns are visible in light font indicating they are preparing to load.   2-3 seconds, that vanishes. Am left with blue header band, spinning wheel indicating it is trying to communicate or process something.   2-3 seconds and then screen goes black and I'm returned to my app desktop.
If I immediately tap icon to reopen I get white screen, with blue header band.   2-3 seconds, black screen, back to app desktop.   If I wait 2 minutes, I get the full shared article, partial post as described above. I've confirmed in the problem log that this is failing in Thread 0 and showing up as system crash.
Based on feedback to somewhat similar FB problem I found in forum; in addition to doing power fail. I also did warm reboot (Home and Sleep keys) in hope app would reboot along with ios. No change.
At this point, I'm assuming my only viable option is to delete the app and reinstall it from App Store. Easy enough to accomplish. But wanted to see if there were any other recommendations, or whether anyone else has experienced a similar failure with FaceBook.
Thanks for your assistance.

Freezed problem after applying Clicks and Pops filter

It always halt after I have submitted Clicks and Pops filter.

Dropping by just to thank you again for your feedback and to let you know that the problem no longer exists. I do still work with Logic Pro 9 at 32 bits (I'll move on to 64 as soon as I finish all the ongoing work started under 32 bits) and I did maintained the buffer size on 256.
I noticed that MOTU had launched a new driver version so I installed it just to realize that the loud poffs and cracks evolved to tiny crackle noise, like static on radio waves, that happened every 2 or 3 minutes, the noise starting slowly (few cracks) then accelerating (many cracks), lasting 5 seconds each time. Then silence (music) again. Major upset.
Then I was notified (as we all were I guess) that a Mavericks update was available. Run the update, a long one I should say, and, problem solved, no more noises - just plain music.
So everything's cool again. Finishing up some more instrumentals without unwanted noises.Thank you all, thx Nigel.
Francis Mann

Strange Problem - iTunes audio clicks and pops when connected to internet

Hello,
I have a very strange problem.
When I go to play a song in iTunes the audio clicks and pops. Not an uncommon problem I know, but here is where things seem to get strange.
I'm using iTunes on a laptop so I have a little switch which allows me to turn off my wireless adapter thus disconnecting me from the internet.
If I'm connected to the internet the audio clicks and pops but if I'm disconnected the audio plays smooth as it should.
The problem arrived out of no where i.e. no changes made to the laptop like installing drivers or programs.
I'm completely lost at what to do and after weeks of searching online I just had to ask to see if anyone here can help me.
Thanks

Since writing this article I read that there is a problem with the airport update for tiger 10.4.11, which is exactly what I'm running. This is a pretty serious issue because I can't even listen to streaming music off the internet (via my firebox) without major clicks and pops. I wish I turned my updater of when things were stable

Problems with IPhone 4S and pop email

Hi
I'd be very grateful if someone here is able to help me
I recently bought an IPhone 4S and am having problems with the two pop email accounts I need to put on it.
When I use these settings below (sent to me by my web hosting company) I get the message
The POP server "mail.myemailaddress.com" is not responding. Check your network connection and that you entered the correct information in the "Incoming Mail Server" field
When I try and send out emails I get the message
Cannot Send Mail
The connection to the outgoing server "smtp.myemailaddress.com" failed
I've also had the message
CANNOT SEND MAIL
a copy has been placed in your outbox. The recipient (email address) was rejected by the server because it does not allow relaying.
Settings I've put in are
Pop Account
Incoming mail server
Host name mail.myemailaddress
User name my email address
Password my password
Outgoing
SMTP smtp.myemailaddress
Advanced
Use SSL off
authentication - password
server port 25
I've also tried using port 26, port 110 and port 995 with SSL enabled and no luck with any of them
I've contacted my web hosting comapny but they can't help so anyting suggested here will be very gratefully received

Some folks think the problem is due to poor solder connections of the WiFi chip on the card. Heating may expand the joints to cause temporary connectivity. The chip itself could be of low tolerance, and the iOS update causes it to fail the threshold. If you have tried the software resets, then the cure is to reflow the solder of the chip to the WiFi card, or to replace the WiFi card. Apple will not "own" this problem, even though it seems to be widespread. Apple offers to renew your contract for a new iPhone at $199. Certain repair shops will tackle this problem, although many local shops will not. In the US try iFix Miami Beach. See them on eBay <http://www.ebay.com/itm/iPhone-4S-Grayed-Out-Wifi-Wireless-Fix-Repair-Service-Tr usted-Specialists-/161160765436?ssPageName=ADME:L:OU:US:1120> for a $69 fix. They fixed my iPhone 4S and returned within a week (even over the Memorial Day holiday weekend). In Europe, I have read about, but have not tried PodMod <http://www.podmod.org>

Problem with avi recording and parallel while loops

Hi,
I made a test-VI which captures my webcam and save it to an AVI. (based on a sample I found somewhere)
This works pretty fine so far (except the fact that the "frames per second"-constant has no effect and I am not able to change the resolution, but that's not the problem).
I have a VI which controls some hardware and I want to record this with the webcam. For testing I made a dummy-VI which should run in parallel with the VI above:
The 1st while loop should capture the webcam.
In the 2nd while loop is a dummy-VI which generates some random values and waits 5000ms (to simulate the hardware).
The problem is that those while loops do not work in parallel. When the execution is finished I get an AVI-file which is about 100ms long (so I guess it captures just 1 frame).
If I replace that whole dummy-VI thing with a stop button it works nicely, but if I try to use a "Wait (ms) Function" or a "Wait Until Next ms Multiple Function" the video is always just about 100ms.
Any idea how to implement multitasking or maybe even multithreading ?
Attachments:
lv_avi-recording.png ‏23 KB

Hi Chris3,
Just a random suggestion but have you tried removing the sequence structure? You can wire the error cluster from the IMAQdx Configure Grab.vi to both of the VIs for it to start parallely.
If you put it in a sequence like that, it is most likely that the middle sequence has to complete execution before it can go to the next sequence but it couldn't because of the wait.
Let me know how it goes.
Warmest regards,
Lennard.C
Learning new things everyday...

Clicks and Pops in Audio even with High Buffer Values

Dear Community,
I'm running into a problem with my Mac Pro 2008 for which I need urgent help.
I have a Mac Pro 2008 which I use to do some audio production and mixing.
I use 10.8 Mountain Lion for some time now, mainly with Avid Pro Tools 10 and Logic Pro 9.
My audio interfaces of choice are the Echo Audio Audiofire 8 and an Eleven Rack (USB) which I never use simultaneously. For tracking guitars and bass I use the Eleven Rack but for mixing and adding other instruments I use the Echo Audio because of its multichannel capabilities.
I had this configuration for many months / years without any kind of problem and being able to use very low buffer values (128, 64 and even 32 bits) with very low latency values (ideal for tracking guitar with software monitoring).
Now I'm running with problems with audio clicks and pops in all audio streams independently of the audio interface I use.
I've tried every tip I found on the web for optimizing my mac for audio with no success.
Independently of the buffer I establish in Pro Tools or Logic (or any other audio software, for that matters) I always get the same harsh, distorted audio, with permanent clicks and pops. It's the same with pre-recorded audio or when using just an armed track with software monitoring. Even when using just Amplitube 3 in standalone mode, I can't get audio working correctly. Raising the audio buffer to 4096 (!!!) or lowering to 64 is the same. The output get garbled, distorted, harsh, with permanent clicks and pops (on the Audiofire or the Eleven Rack).
I've already tried reinstalling drivers, mangled with all audio preferences possible with no success.
I'm considering, as a final option, to reinstall the OS and all audio software from scratch but this is the very final possibility because of the long long hours needed to do so.
Does anyone have some idea about this?
Could anyone help me?
Best Regards,
Luis Mota

Luis, the sound you're describing does not sound like a clock problem.
Sync set to "Internal"
To check you can go to Settings/Synchronization uncheck "Auto Enable external sync".
I'm guessing like most Mac users you have the operating system set to auto update, if so the system may have updated on it's own so you can't be sure you're running the same system that worked perfectly in the past.
I disable every "auto" b.s. Apple/OSX tries to force on users... for pro audio users, it generally causes problems.
Here's some things to try.
1. Set the Mac's audio preferences to use only built-in audio for both recording and playback. Do so in both System preferences/sound and Audio-MIDI Setup. Turn off the Mac, unplug and audio interface you have hooked up. Restart the Mac, Plug in an audio interfaces (doesn't matter which one) open Logic, go to Preferences Audio and select the installed interface, even if it's selected already, set buffer to 256.
Any difference?
2. Create a New User account and try running Logic from there.

[Vista x64] Microphone problems with X-Fi and 2.15 drive

Hi guys,?I'm having a problem with the 2.5 drivers on my X-Fi Platinum card, under Vista x64. It seems the microphone inputs (both on the card and on the breakout box) have problems, any recordings stutter and pop rapidly, making any recordings (or voice chat)?quite useless. This issue doesn't occur with the 2.3 drivers. Is there any known solution to this problem yet?My system: e6600 CPU, Asus P5W-DH motherboard (975X chipset), 4GB RAM, 8800GTX, X-Fi Platinum. Thanks.

hey Darkman,
since I never had this problem with installing this software, I cant really tell whats wrong, but you dont need it anyway to use the x-fi.
but you may want to try one thing, since it crashes at 27% something may still be in use, so check your task manager and close everything that has CT in its name. then try reinstalling again. If that still doesnt work, try to empty your temp folder, its located in documents and settings/user you are/local settings/temp
if that still doesnt work, try maybe something stupid, wait a bit longer than usual and keep the install window in the front to watch the process, maybe your pc is just a bit slowed down by other software so it may take longer than normal

A problem occurred with this webpage so it was reloaded this is popping up when I use any forum using safari on my iPad and this is happening ever since I haven installed iOS 8 I have tried to reset all setting

A Problem occured with this webpage so it was reloaded this is popping up when I open any forum using safari on my iPad mini this is been happening ever since I have downloaded iOS 8 I tried to reset all the settings and reset network settings but nothing helped please if anyone can help me .

Its not necessarily freezing - just being slow to build.
May have something to do with this being a secured site - I an giving Opera a test run & this part of the apple site does not go into compressed load - but the non-secure parts of the site do. The issue may be that some sites like apples just have too much unimportant junk on the screen because the designers are on an internal network a few offices away from the server and never see all the issues that com up.

Can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

After i restoring the vault and finish the restore the aperture pop up icon said : a problem was encountered when attempting to restore from this vault. Please ensure that the has the appropriate permissions and try again.

after i restoring the vault and finish the restore the aperture pop up icon said : a problem was encountered when attempting to restore from this vault. Please ensure that the has the appropriate permissions and try again.

Try this:
#Go to '''Tools '''| '''Options '''| '''Advanced '''and click the '''Network '''tab.
#In the Offline Storage menu, click the '''Clear Now''' button.
#In the location bar, type '''about:config '''and hit Enter.
#In the filter at the top, type: '''keyword.URL'''
#Double click it and remove whatever's in there. You'll see it revert to "Default" and "String".
#Go to File | Exit
#Restart Firefox and go to the page you want to set as your homepage
#Go to '''Tools '''| '''Options '''| '''General'''.
#Make sure it says "''Show My Homepage''" in the first dropdown menu.
#Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.

Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised the value of Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Avi, mpeg and mov problems

I`m having no luck playing streamed .avi, mpg and .mov ( all video) files.
The avi and mpeg video files freeze up upon start up and only show the first second of the video for the first 5-10 minutes. After that they play fine although with no sound. They also play and sound fine after being downloaded and then opened.
The mov files only show the sliding bar or , after being saved , the blank QT screen with the bar sliding and no sound.
Also , the QT "intro" on apple.com/quicktime (the timberlake video) refuses to play properly, it just comes in very "blocky" with only occasional sound bits getting through. The same can be said about some avi files, when they do work.
I have flip4mac , divix, 3vix, xvid installed. Tried perian but that completely killed all streaming avi playback , just a Q with ? mark. Downloaded AC3 codec and put in the QT folder. no luck.
These are the sites in question.
http://www.justintimberlake.com/QuickTime/justintimberlakeqt.html
http://www.geocities.com/Heartland/Prairie/1568/videos/riki_discovers.mov
Couldn`t find any avi movies to use as an example.
Last question. Is there a way to automaticaly stream avi and mpg files in the same QT screen as wmv and asf files?
thank you and sorry about the long post.
imac intel core2duo Mac OS X (10.4.8)

Try VLC media player regarding playing .avi files.
===============
I had no problems playing the Timberlake video. However, when I tried to play your second link (.mov) all I got was the bar, no audio or video.
Regarding your 1st link, have you tried repairing permissions & restarting?
Regarding your 2nd link: Apparently, it's a bad video link & no fault of yours or your computer.
====================
"Is there a way to automaticaly stream avi and mpg files in the same QT screen as wmv and asf files?"
The following is a work-around for .avi files. Not sure if it will also work for .mpg files.
Open the file with QuickTime Player.
Open the Movie Info window (Command-i).
Note the name of the video codec used in the file.
Do a Google.com search for codec name +Mac and download one appropriate for your OS and computer.
Quit and relaunch QuickTime after installing the new codec.
Try the file again.
Thanks to QuickTimeKirk for the above info.
================
Regarding no audio sometimes................
If repairing permissions does not work, then try the following:
KB article - No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4)
Another trick: If you have GarageBand installed, open it and then quit.

How can i avoid a pop-up window when calling the avi.dll?

Ok, here another try!
My problem is as followed:
My program calls the avi.dll to initialize, write into and close an
avi-file.
Now, when initializing it, a pop-up window is shown so you can choose the
codec to use.
My question is, can I pre-define the codec, so the pop-up window won't show
up?
The program is meant to write several files, some starting without the user
having to control them, so the pop-up window really isn't helping.
Any ideas?
I attached the avi.dll in case you need it to look at the problem.
Also helpful would be, if someone could tell me, how I can take a closer
look at the structure of the dll. Is there a program I can do that with?
Thanx!
regar
ds,
Martin

Hello Martin,
I have used this DLL before and wasn't asked to choose a codec. Maybe if you use all three functions (init, write, close), it works without problems. Here's a example that uses IMAQ hardware to acquire an 8-bit image at 30fps and writes each image to an avi file.
There are utilities to examine dlls (see what functions are exported and what the dependencies are, but you can't see source code since it is compiles.) Check out QuickView or DependencyWalker.
Attachments:
avigrab.zip ‏66 KB

Why when I tried to update itunes it crashed and now I get a MSVCR80.dll was not found and can not start my itunes any more

Why when I tried to update itunes it crashed and now I get a MSVCR80.dll was not found and can not start my itunes any more?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Posting-problems - WAS: avi.dll and pop-up

Similar Messages

Maybe you are looking for