Posting run is successful but document is not posted

Hi Experts,
I am able to run the Payroll results posting run (PC00_M99_CIPE) successfully and released. But when I check the status im getting the below Error.
"Document was not posted to accounting.
Message No 3G098."
Kindly let me know, what is the required configuration to post the document to accounting.
Regards
Raveendra.

Hi Ravendra,
You might have forgot to post the document...
First Document has to be released (Which you did)
Next you have to post the document... (Which is pending from your side)...
Tcode :- PCP0
look out for your document which is released .. You need to post it ...
Regards,
Veeram

Similar Messages

Accounting documents are not posted for Excise invoice

Hi,
1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
2. where we will maintain number ranges for excise invoice..?
Thanks
Rao..

hi
1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
Not sure but can u try to relese this to accounting
2. where we will maintain number ranges for excise invoice..?
Excise invoice number range is depend on Excise series group.
T-Code : SNRO
Following is the No. Range Objects related to Excise, select the proper no. range object as per your requirement.
J_1I57FC - 57FC Number Range
J_1IARE1 - ARE1 Doc No object based on Series Group
J_1IARE3 - ARE3 Doc No object based on Series Group
J_1IBOND - Excise Bonding: Bond number object
J_1ICERT - Withholding Tax Certificates (India)
J_1ICHLNNO - Internal number range for challans
J_1ICONPLA - Consolidated PLA serial no. generation
J_1IDEPINV - Excise Invoice Number for Depot Invoices
J_1IEXCEXP - Export excise invoice number range
J_1IEXCINV - Excise invoice number
J_1IEXCLOC - Local excise invoice numebr range
J_1IEXCTST - Excise invoice with intervals
J_1IEXINEX - Excise invoice number for export
J_1IINTNUM - Internally document number to be generated
J_1IINTPR2 - Despatch serial number
J_1ILIC - Excise Bonding: License number object
J_1IPLA2 - PLA part II number range object
J_1IRG1 - RG1 Number range object
J_1IRG1_T - No. Range for RG1 - Excise group / Material
J_1IRG23A1 - RG23A part 1 no. range object
J_1IRG23A2 - RG23A part II number range object
J_1IRG23C1 - RG23C part I number range object
J_1IRG23C2 - RG23C part II number range object
J_1IRG23D - Folio Numbers for RG 23D
Check the link
Re: Excise Invoice Number Range
excise invoice and domestic invoice sharing same number range

Bank statements are uploaded successfully, but transactions are not shown in FF_6/FEBAN

Hello Friends – Can you please clarify my doubt with regards to the issue with Bank statement upload.
We uploaded the Bank statements successfully. After that when I go to FF_6/FEBAN, I do not see the transactions and Bank statement we received has got transactions.
It shows Statement status “8”.
As Documents are not posted (I also checked in FEBEP table, do not see any line items), I should delete these Statements and upload them again?
Thanks

Hi,
Please check if you have marked " Do Not Post" in FF_5 for importing bank statement.
This could be one of the reason why you are not seeing bank statement in SAP.
Regards
Nitin

My program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either. I uninstalled the program and reinstalled again but nothi

my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either.
I uninstalled the program and reinstalled again but nothing gone better-
What should I do?
Best regards

Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up

My application is running in localhost but it is not running in static ipad

Hi all i have developed a web application which is running in localhost
but it is not running in static ip address.I mean to say we have server
which is exposed to internet ,if we deploy our web application in weblogic 8.1 which is running in our server and if try to access our web application from other pc which is having internet,is not accessing.
Plz give me tho solution for this, it is very urgenttt ..

Hi Sibaram3274,
Thank you for posting in MSDN forum.
Based on your issue, if you want to do coded UI test you install local machine to automate customization Epicor ERP( the Epicor ERP on the Vmware). I think that there have no way to test this Epicor ERP application using coded UI test.
Since if we want to do coded UI test for an application, we will need to ensure the application and coded UI etst on same machine. You can be run on the coded UI test on your local machine or you can also install the VS on the VMware.
So I suggest you can install the VS on the VMware or you can also copy this application and then run the application on your local machine.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I downloaded Firefox 4 successfully, but it did not incorporate all my info from previous version (history, bookmarks, tabs, etc.). How do I combine the two?

Current download of Firefox 4 successful, but it did not include info from the previous version such as bookmarks, history, tabs and the like.

I am currently using version 3.6.3 because it has all the information that I need to use the internet. version 4.0 did NOT incorporate all history and so forth (including tabs, bookmarks) when I downloaded it, as previous downloads had. I will continue to use the older version until someone can help me figure out how to merge the information from the older version with the newer one. The posted answer was greek to me and did not help.

Post order processing for sales document is not yet complete

hi,
sap gurus,
i am facing the error while saving the sales order and this ticket is unique and it is saying that
"post order processing for sales document is not yet complete".
please help me in this regard.
and it is blocking the order for further processing.
regards,
balajit

I dont think this is a standard error message. Some exit is applied for sale order to meet some requirements. You need to check with your ABAPer.
In fact, you can conclude yourself based on the error message number. If it starts with Z, then the above holds good.
thanks
G. Lakshmipathi

Pdf file shows open but document does not appear on monitor

Using Illustrator CS2 for pdf documents. Have a few files created with CS2 that show as being open in the Tool Bar "Window" but document does not appear on monitor.

Try Ctrl-Y for preview.

I updated my Iphone which is successful but it is not activating.

I updated my Iphone which is successful but it is not activating.

Okay.. I guess you can't tell us the complete message.
This is normally part of a message that indicates the Iphone was jailbroken or unlocked by someone other than the carrier.
If so, we cannot help you here and you need to work with your carrier.
We are just users, not Apple support.

Document parked not posting, approved by manager not posting

Hi experts,
Document parked not posting, approved by manager not posting.Could you please assist us ASAP.
Thanks & Best regards
Sreenivas

Hi Srini,
To post the parked document you can use the Transaction FBV0. If workflow is involved in the process check with your workflow consultant to know the status and rerun/trigger the workflow manually according to your requirement.
Warm regards,
Murukan Arunachalam

Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow. Any help anywhere?

Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow. Any help anywhere?

wqn02h, first thing I would do is use Disk utility to repair permissions. Once this is done. Make sure you have the latest versions of the software you use. Also, check the manufacter of your printer/scanner for updated software. If they don't have updated software there are 3rd party alternatives that will work.
Paul

HT5271 I cannot watch utube videos or any film content as of yesterday. I tried to download an updated version. I was successful but that did not change anything. What can i do?

I cannot watch utube or any other video on my macbook all of a sudden. It says "blocked plug ins". I tried upgrading and was successful but that did not help. I still cannot watch videos. Help! Anyone had this problem and found a sollution?

After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. Then relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.

I am able to print interest but it is not posted

Hi
I am able to see interest printed but it is not posted
i used both F.2a and F.2c
i will assign points for useful answers
regards
prasad

Hi,
Need to check below whether its genarated batch input session or not when u execute the Intrest calculation report please check below other wise it will show error log.Let me know if you need any further details.
Regards,
Satya

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
    <Author>MYDOMAIN\SERVER1</Author>
    <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
    <CalendarTrigger id="Trigger 1">
      <StartBoundary>2014-07-14T21:00:00</StartBoundary>
      <Enabled>true</Enabled>
      <ScheduleByDay>
        <DaysInterval>1</DaysInterval>
      </ScheduleByDay>
    </CalendarTrigger>
</Triggers>
<Principals>
    <Principal id="Author">
      <UserId>S-1-5-18</UserId>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
</Principals>
<Settings>
    <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>true</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <IdleSettings>
      <StopOnIdleEnd>false</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
    <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
    <WakeToRun>false</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <Priority>7</Priority>
</Settings>
<Actions Context="Author">
    <Exec>
      <Command>%windir%\System32\wbadmin.exe</Command>
      <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
    </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

Billing documents did not post to PCA Ledger

The system did not crate did not create Profit Center Documents and CO Documens for 5 billing documents when released to Accounting.
But when the customer made payments, the payment document created a profit center document. The AR is not reconciling to GL.
The KNC1 table is not showing the Invoices but showing tha payments. So the customer cumulative balance is out of sync. This is causing our custom reports for AR Aging not reconciling to GL.
I have posted using 1KE9 the billing documents to PCA, this has not fixed the issue.
This report S_ALR_87012172 for customer balances in local currency is showing incorrect customer balance.
How can I fix the GL / AR?

Hello Geeta Gupta,
There is a SAP internal interface between SD and GL. You can check it by tcode VFX3.
If a billing is proceeded in SD succesfully it can be sent out to the customer to fix the recievable with the external customer. SAP internal account determination or other customizing mac not be complete to transfer the billing document to GL completely and successfully. So it gets stuck and can be identified using VFX3.
As it goes through to GL it is in AR in the same moment (In 20 years FI I have never seen a difference between AR od AP and GL). Only documents posted in FI-GL or CO can be transferred to PCA. There is NO link between billing documents and PCA (remember it is CO-PA which has billing as a direct source). So a billing which is not in GL cannot be in PCA.
So start VFX3, identify and comlete the missing settings and then kick off the billing to be posted.
Regrads JMy

Posting run is successful but document is not posted

Similar Messages

Maybe you are looking for