Posting Security Deposit for vendor & Customer

Hi
I want to post the security deposit paid to vendors and security deposits received from the customers.
I have maintained different special GL indicators for the same.
Which TCodes I should use to post the above transactions?

Dear
u can use F-55 - Statistical Posting , F-57 - Noted Items
and F-38 - Statistical Posting , F-49 - Noted Items
in this case if u r using the Noted items there no Financial effects. system genrated only one line item.
Regards
radha

Similar Messages

Few queries about foreign revaluation for vendor/customer open items

I am trying the transaction F.05 for the first time for vendor & customer open items in foreign currency. I have a few queries:-
1. The ouput contains 2 exchange rates. One is picked from the transaction header. My query is from where is the other rate being picked up. In my current system, I could make out that exch rate in transaction header is being picked automatically from table OB08....however I am unable to deduce the source of the 2nd exch rate.
2. What is the significance of "balance sheet preparation valuation". Earlier in test runs, only "new difference" was getting populated. However the user wanted to see "old diff" also. So while doing some trial run in test client, I checked the "bal sheet prep valu" and posted.....after this run, I am getting values in "old diffe" and "new diff" also. And the posted amount is the difference of the two. What is the significance and ideal way?
3. Should the entry be reversed if I am revaluating at year end? Why I am asking is because in some threads I read that revaluation at year is not to be reversed....
Thanks,
SM

1. To find out difference latest date(Key Date for OI Overview) will be taken by comparing with document posted dated. Based on that system shows diffrences
2.   The items are valued using the exchange rate valid at the key date. The
      difference determined in local currency is output and posted. The
      valuation can also be done for parallel local currencies and according to
      different valuation approaches (HGB, GAAP).
      The result of the valuation is required for the creation of the financial
      statements. You should therefore carry out the valuation before the
      grouping of receivables and payables with program SAPF101. The valuation
      difference is then noted in the document. Use the valuation areas to
      calculate a different valuation method, or to save the result for further
      processing activities.
3.   we need to reverse entries .

Security Deposit Amount from customer should not be deducted

Hi,
client requirement is Security deposit from Dealer(Customer) should not show the balance of amount of Invoice of the Dealer, It should be shown seperately and not show the balance after deducting Security deposit. This security deposit is returnable to Dealer.
So, all the invoice raised to customer and credit memo should be shown different amount without deducting from Secutiy deposits.
For example If Rs. 1lakhs is security deposit
there r 3 invoice of debit against Customer say 60000. In customer line item it should not show the balance of Rs40000. It should show only 3invoice amount of Rs.60000 and it should show seperately Rs.1lakhs.
IS Thereany configuration of this scenerio.
Regards,
Sreekanth

Hello,
This is what expected to do.
That is the reason SAP has provided with two check boxes in FBL5N.
If you select only normal items you will be shown INR +60000
If you select both normal items and special GL items, you will be shown INR 40000- (-10000+60000)
If you select special GL items it will be shown -100000
There is nothing special you are required to do.
Regards,
Ravi

Re: Security deposit against vendor is picking up the tds .

Dear Team,
I am encountering an issue regarding tax calculation ..At the time of periodic posting security deposit is deducting the tds which is incorrect. We are implementing real estate in 4.7.We had pulled the with holding tax through BADI. Please advice how should i restrict the badi for the security deposit.
Note: I had maintained all condition types separately for security deposit and as well normal rent. Please guide us. Thanks for the consideration.
Regards,
Suma.

Hi all,
Thanks for responses .I found a solution for this.
Regards,
Suma.

Dual Control for Vendor/Customer Master Data

We can set Dual Control for Vendor/Customer Master Data. I have set it. According to the cycle, I have customized sensitive field, and make changes in Vendor/Customer A/c. Here the changes will be confirmed by other user who is authorised to confirm the changes. In this scenario, I would like to know, can we avoid this confirmation once we have actived? If, no than how could we confirm the changes and where can we set authorisation?

Dear,
No, You cannot avoid the dual check if You activate it. Another user by FK08 has to confirm the changes.
Then You can delete the field for the dual control into the table T055F and no check will be done in the future.
I hope this helps.
Mauri

How to post credit memo for a customer usin F-27 transaction using IDOC .

Can somebdy please advise as to how to post credit memo for a customer using F-27 transaction using IDOC ?
Thanks in anticipation ,
Ambar patil .

Hi,
https://websmp207.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001305932005E
https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000051812008E
Thanks,
Mansoor

Cash journal: security deposit refund to customer in cash

Hi
Please mention how to post in FBCJ; security deposit refund in cash to custmers. As we cannot use expense or other business transaction type in cash journal posting.
Regards
Keyin.12345

Dear Llu jo and Atif
Thanks for your wonderful inputs, I have done the posting and subsequent clearing. But I have two doubts in this...
1. When i am posting to customer account in FBCJ, it is getting posted to Main reconciliation and from there I am trasnfering to Special gl account using f-02, and in next step i am clearing using f-32. Is this correct or do we need some other account in FBCJ. If it is possible plesae provide journal entries.
2. I have read on sdn that we can use substitution rule, I am trying to create but in substitution step HKONT field is not displayed. . In prerequisite step HKNOT field is there but not in substitution step. Is there any way we can distplay HKONT.
Please do the needful
Regards
Keyin.12345

How to make the cost center or WBS field optional for Vendor/customer line?

Dear experts:
Does anyone has the experience of releasing WBS or cost center fields to be optional for the customer or vendor line item?
I've tested in system, neither the field status control in GL account master data nor the FSG in posting key worked, I can't let the WBS field to display in the screen and ready for input.
So my conclusion is that the FSG control in not completely effective for customer/vendor line, it there any other method to let WBS to be optional in custer/vendor line items?
Our purpose for changing that is that we're using joint venture accounting, we need to let users to input a cost object for system to derive joint venture information. please do not suggest deriving JV information using other methods, because we're dealing with a special case, i.g. in a cross-company document, only a customer/vendor line in our company, so it's impossible to split JV information from offset lines, anyway, please help me out directly with my issue.

Hi, Lu:
If I understand your question correctly, you want to modify the FSG of recociliation account of Vendor/Customer to make sure Cost Center/WBS field display in transaction F-22/F-43 for example, right?
I am not sure whether it is possible, I also tried in ECC6.0 but failed to show these two fields. And I think that doesn't make sense to assign CO object to AP/AR reconciliation account, but assign it to Revenue/Expense account in following line items.
And You can use New General Ledger functionality Document Splitting to derive corresponding CO object information to Reconciliation Account line item, but it is enabled only in General Ledger level, not in subledger level.
If you find any other meaningful solution, please also share with us.
Thanks & BR, Lawrence

Populating Profit Centre Field while doing Transaction for Vendor/Customer

Dear Experts,
I have cheked in FSG of GL Code of Vendors/Customers where "Profit Centre " is a optional field.
I have cheked in OB41 also for posting key relating to vendors/customers "Profit Centre" field is set as optional field.
We need to make entry in the Profit Centre Field for both Vendors and Customers whicle doing manual posting.
How can we bring that field which is not populated while doing transaction with posting keys of vedors and customers.
Regards,
Alok

Dear Sayeed,
I am agree with u, but since in SAP Vendor /Customer Line Item takes automatically profit centre from the other line items.
Here is an example:-
We have different profit centre for plant(104001) and coprorate office(106001)
Customer billing is done at plant then the entry will be:-
Customer A/c Debit (by default it will take 104001 profit centre)
Sales A/c Credit with Profit Centre 104001
In Corporate Office We Receive the sales proceeds:-
In Coming Bank a/c Corporate Debit with Profit Centre 106001
Customer A/c Credit (It will take by default profit centre 106001)
By this If we genrate Profit Centre Wise Trial Balance then all Customers Debit will lying with Plant Trial
and Customer Credit Balance will lying in Corporate Treial Balance giving a mis information to the auditors.
For solving this we need to populate the Profit Centre field in Customer line item so that while doing the received entry we can selct the Plant Profit Centre (104001) in Customer line item so that the Customer balance become Nil in Plant Trial.
Hopw you understand our requirement.
Regards,
Alok

Profit Center for Vendor/Customer line item in F-02

hi all,
We have implemented SAP ECC 6.
At the time of vendor line item posting, there is no input field for profit center.
Can anyone please tell the way out for Profit Center field pop up in case of t-code like f-02 for vendors & customers
Abhishek

Please note the following:
- On FBL5N and alike customer/vendor line item reports you won't find
the field profit center filled; hence you can't directly input it during document entry (as pre-mentioned)
and the profit center for customer/vendor gets inherited (as of document splitting functionality) from the document other line item(s) (according to the defined document splitting rules...)
- Yet you can use the below reports (with New G/L.) to get the customer/vendor line items wise reporting over a profit center (i.e. unlike FBL5N & showing the inherited customer/vendor profit center in the G/L. view)
S_AC0_52000887 - Line Items->Open Items->Receivables: Profit Center
S_AC0_52000888- Line Items->Open Items->Payables: Profit Center
In both reports you can use:
"Custom Selections" -Dynamic Selections Icon- enabling you to filter the output according to
a. Customer line items specific data entered within the posted document(s)
b. General ledger items of the G/L. view of the posted document(s)
& the "Output type" includes like most of the New G/L. Reports:
- Graphical report output
- Classical drill-down report
- Object list (more than one lead column)

Wht r the standard tables for vendor customer and sales order report/

Hi wht r the standard tables for vendor and customer reports and is how in normal we cannot use them for vendor reporting and etc ?

Hi
Customer is related to Sales Module
So for a customer we fetch the reports of Sales orders , Deliveries and Billing doc's
CUstomer and Vendor related tables with important fields:
KNA1: Customer Master-General(KUNNR,NAME1,LAND1)
KNB1: Customer Master(Company Code)(KUNNR,BUKRS,PERNR)
KNC1: Customer Master Data (Transaction Figures)(KUNNR,BUKRS,GJAHR)
KNVK: Customer Master Contact Partner(PARNR,KUNNR,NAME1)
KNVV: Customer Master sales data(KUNNR,VKORG,VTWEG,KDGRP)
KNBK: Customer Bank Details(KUNNR,BANKS,BANKL,BANKN)
KNVH: Customer Hierarchy (HITYP,KUNNR,VKORG,VTWEG,SPART)
KNVP: Customer Master Partner Functions(KUNNR,PARVW,KUNN2)
KNVS: Customer Shipment data(KUNNR,VSTEL,TRANS)
KNVI: Customer Tax data(KUNNR,ALAND,TATYP)
LFA1: Vendor Master-General (LIFNR,NAME1,ORT01)
LFB1: Vendor Master(Company Code)(LIFNR,BUKRS,PERNR)
LFC1: Vendor Master (Transaction Figures)(LIFNR,BUKRS,GJAHR)
Sales related Tables for a customer
VBAK: Sales Document(Header Data) (VBELN, KUNNR)
VBAP: Sales Document(Item Data) (VBELN,POSNR,MATNR,ARKTX,CHARG)
      Enquiry, Quotation, Sales Order are differentiated based on Doc.
      Type(VBTYP field) in VBAK,VBAP Tables( for Enquiry VBTYP = A,
      for Quotation 'B' & for Order it is 'C'.)
LIKP: Delivery Table (Header Data)(VBELN,LFART,KUNNR,WADAT,INCO1)
LIPS: Delivery Table (Item Data)(VBELN,POSNR,WERKS,LGORT,MATNR,VGBEL)
      (LIPS-VGBEL = VBAK-VBELN, LIPS-VGPOS = VBAP-POSNR)
VTTK: Shipment Table (Header Data)(TKNUM)
VTTP: Shipment Table (Item Data)( TKNUM,TPNUM,VBELN)
      (VTTP-VBELN = LIKP-VBELN)
VTFA: Shipping Document Flow(TKNUM,VBELV,VBELN)
VTPA: Shipping Partners data(VBELN,PARVW,KUNNR,PERNR)
VTTS: Stages in Shipment(TKNUM,TSNUM,TSTYP)
VTSP: Transport Stage/Shipment Item Allocation(TKNUM,TSNUM,TPNUM)
VEKP: Handling Unit: Header(Packing)(VENUM,VSTEL)
VEPO: Handling Unit: Item (Packing)(VENUM,VEPOS,VBELN)
VBRK: Billing Table(Header Data)(VBELN,FKART,BELNR)
VBRP: Billing Table(Item Data)(VBELN,POSNR,FKIMG,NETWR,VGBEL,VGPOS)
      (VBRP-AUBEL = VBAK-VBELN, VBRP-VGBEL = LIKP-VBELN)
      Apart from these tables there are lot of other tables which starts with
      V, but we use the following tables frequently.
VBUK: All Sales Documents status & Admn. Data(Header)(VBELN,VBTYP)
      VBTYP= C(Sales Order) VBTYP=J(Delivery) VBTYP=M(Invoice)
VBUP: Sales Documents status & Admn. Data(Item)(VBELN,POSNR)
VBEP: Sales Doc. Schedule Lines Data(VBELN,POSNR,EDATU,WMENG)
VBKD: To get sales related Business data like Payment terms etc.(VBELN,ZTERM)
VBFA: sales document flow data(VBELV,VBELN,POSNV,VBTYP)
VBPA: Partner functions Data(VBELN,PARVW,KUNNR,LIFNR)
VEDA: Contract Data(VBELN,VPOSN)
VEDAPO: Contract Data(VBELN,VPOSN)
Vendor related MM tables
EBAN-- Pur.Reqn. Data (BANFN,BNFPO,BADAT,MATNR)
EBKN-- Purchase Requisition Account Assignment(BANFN,BNFPO,VBELN)
EINA- Purchase Info.Record (General Data)(INFNR,MATNR,LIFNR)
EINE-- Purchase Info.Record (Pur.Orgn Data )(INFNR,EKORG)
ELBK-- Vendor Evaluation Header Data(LIFNR,EKORG,KLASS)
EKKO-- Purchase Order Data (Header)(EBELN,BSTYP,BSART)
EKPO-- Purchase Order Data (Item)(EBELN,EBELP,MATNR)
       RFQ and PO are differentiated by Doc Type(BSTYP)in EKKO table.
       For RFQ it is A and for PO it is F.
MKPF-- GRN Data (Header) (EBELN,BLDAT,BUDAT,XBLNR,BKTXT)
MSEG-- GRN Data (Item)(MBLNR,BWART,LIFNR,MATNR,EBELN)
       Apart from this there are lot of tables which begin with 'M'& 'E', but we
       use the following very often.
EKBE--PO History Data (EBELN,EBELP,BELNR,BLDAT,MATNR,VGABE)
EKBZ--PO History with delivery Costs(EBELN,BELNR,LIFNR,XBLNR)
EKET--Schedule lines data of a PO (EBELN,EINDT,SLFDT)
EKES--Vendor Confirmations Data(EBELN,EBTYP,EINDT,XBLNR)
Reward points if useful
Regards
Anji

Security Deposit from Vendor

Hi Experts - We have a program where the vendors sign-up promising to deliver according to a specific delivery schedule and quantity. We need to take a security deposit from the vendors, this will be returned after they have fulfilled their obligation.
Any input on how to do the security deposit / subsequent refund payment will be appreciated.
Thanks
Sam.

Hi Sam,
we had this scenario and the solution what we concluded is
via an new special GL indicator to carry this deposit and then
knock it later. Its really a process so you have to decide upon
after discussing with the user.
regards
pbb

Printing balance confirmation for vendor & customer

Hi Sapient
I had defined a vendor & linked a customer in the vendor master & vice versa.
I want to print the balance confirmation form for the vendor.
My requirement is as follows
1. When i print the confirmation form for the particular vendor & if had linked a customer to the vendor, then I wnat the open line item in the cusotmer account shoudl be included in my vendor balance confirmation form.
Is the above said scenario is possible through SAP standard. If not can you provide me with alternate solution.
Regards
R.Karthigayan

I presume you are using program SAPF130K or F.18 for vendor balance confirmation. You cannot run statement of vendor balance including customer if they are vendor and customer.

BUSINESS RULES FOR Vendor, Customer & PRODUCT

Hi,
Can any one help me to provide Business Rules(Validation Rules) of Vendor, Customer & Product domain to be considered in integrating with other technologies.
Thanks & Best Regards,
Giri

Hi Joseph,
First tell me how you want to maintain Inventory size wise?? If it is your A is Length, B is Width and C is your Height and you are not maintaining size wise stock then use Length,Width and Height which is in Item master here you can set fix values and activate same columns in document and you can change it in document. But in this case you cannot maintain size wise stock
If you are maintaining stock size wise then you have to create new item code every time.
You cannot use BP catalog number for this.
Thanks
Sachin

Security Deposit for adding new lines

Hi, I have an AtnT family plan for about 8 months now. Some of my friends want to join my plan but they are reluctant to pay any security deposit. Could you please let me know if it is needed in the first place?

Hi there
I’d be happy to help address your concerns regarding security deposits!
While a deposit is not always required, it is determined automatically based upon a number of factors including credit score of the account holder and any associated AT&T payment history. If a deposit is indeed required to add additional lines to your account, the deposit is refunded to you after 12 months from the payment date with good payment history.
I hope this helps!
Charise

Posting Security Deposit for vendor & Customer

Similar Messages

Maybe you are looking for