Posting stock lot wise
Hello all,
Can any one can tell me once the usage decision is done for a lot.
Now my stock quantity is in block state i want it to be in unrestricted state. how can i do it.
I know through mb1b i can do but there i can transfer the stock for the whole material in the particular location.
I want to transfer the stock for a particular lot how can i do?
Please help me out...
Please help me out.....,
Hi
As you stated its already UD has been taken and the stock is transfer to Blocked stock, so at this time stock is not under inspection lot and you can not transfer to unrestricted use with respect to inspection lot.
The process is done with respect to inspection lot already.
Similar Messages
-
dear sir,
can i have the transaction code for stock on posting date GL wise.
IN MB5B THERE IN NO FIELD WITH GL AND IN MB5B THERE IS NO POSTING DATEHi,
There is a posting date in MB5B !!!!!!!!!!!!!!!!!
The whole point of MB5B is to give you the stock on a posting date.
The field is called "Selection date".
Steve B -
Stock posting for lot 010000000121 not supported
Hi Experts,
I am unable to reverse the UD and stock by using SAP NOTE 175842.
By using std program RQEVAC50 activated ZQM_RQEVAC50 and given the transaction code.
When I runn this T Code System is giving error massage "Stock posting for lot 010000000121 not supported"
Cross Checked all parameters find below
1) For movement type 322 and 349 assigned T Code QA11 and QA12
2) Posted stock available in same storage location
3) Lot 10 qty posted to unrested qty 10 and lot status is " UD ICCO SPCO STUP "
4) Material Not serial managed
Pls tell me the reason why it is not happening
Thanks
Shiva Patil
Edited by: SHIVA PATIL on Jan 15, 2010 4:10 PMResolved
-
Error while posting stock from quality to return delivery
Hi ,
I am working in decentralized warehouse. I am posting stock from quality to return delivery in t code QA32. The following is the error message i am getting . i have also checked the movement type settings they are fine for 553.
"Posting only to free or blocked stock due to missing goods receipt".
Please let me know if i am missing any thing in config......
Thanks
IlyasHi Ilyas,
Can you check again the movement type? For return delivery movement type 122 is used and 553 is for GI scrapping from QI. You can check it in SPRO>QM>QI>Inspection lot completion> Define inventory postings.
reg,
Sudhir -
"Check Business Area of the company code" error while posting stock
Hi Experts,
While posting stock to a storage location of a plant , the system is giving me the following error message :
"Check Business Area of the company code" .
Would highly appreciate if I could get some info for this error message and how to resolve the same.
Thanks & regards
Vikas Halihi
i think division is missing in material master basic data , please enter division in basic data tab in material master then you will try ,
then post the stock
regards
vijay -
"UNABLE TO POST STOCK IN MB1C"
Hello. GE...
When I am trying to post stock in MB1C, I am unable to proceed further as the system shows the error "Account determination for entry INT GBB ____ BSA 7900 not possible
Message no. M8147",
When I am trying to correct the entry in OBYC, i get an error "No changes for user SAP* allowed; Choose 'Display object' or 'Cancel'."
Please help.
thanks and regards,
syamalaPlease search in forum or google so that you will find related suggestions.
Check one such thread
[No changes for user sap allowed when using data dictionary|http://sap.ittoolbox.com/groups/technical-functional/sap-basis/no-changes-for-user-sap-allowed-when-using-data-dictionary-3699582]
G. Lakshmipathi -
How to post stock in quality inspection
Hi all
we want to post stock in quality by using MB1A t_codeHi,
Activate the QM in Material master for your finished product, as soon as the goods movment is done from PP for the finished prduct the material will move in the quality stock.
Hope its useful.
Reward points if useful.
Thanks.. -
Posting stock entry in previous period
Dear Friends
Can anyone pls tell, whats the how to post stocks in previous period.? Eg: previous month or previous quarter.
Rgds
Sumanth.GururajPlease refer following links-
- [Posting to a Previous Period|http://help.sap.com/saphelp_46c/helpdata/en/47/6102e749f011d1894c0000e829fbbd/frameset.htm]
- Stock In Previous period
- Post in previous period
Hope this can assist you.
Thanks & Regards
JP -
How to post stock and what transaction codes
Hi gurus
If I created new material how can I post stock in to the material to process.
Ex:MMBE for stock checking.
But what is the t -code to enter some stock at materila.
also how what other transaction I can for stock posting at various scenarios.(I mean what other transaction codes for different things)
Thanks
KrisHi
Enter T.Code: MIGO
Select : Other
Movement Type : 561
In the item Details Entyer the material . enter the quantity. Plant and Storage Location.
Save it. CHekc the Stock In MMBE for that material.
Thanks & Regards
Ram -
Maintaining Item Stock Project wise.
Hi All,
I am implementing SBO 2005 B for the Project base company. They get the order & each order is treated as a Project.
Now the question is material tracking is required Project wise i.e. which item is available & under which Project.
Scenarios are:
1. Project wise stock should be available.
2. Transferring the Stock from one project another (i.e. if material is not required for the particular project)
3. At the time of delivery the item should reduce the stock from the Particular Project as selected.
In all the related transaction at line level I am capturing the Project code.
Currently work around planned is to maintain the Stock warehouse wise i.e. for each Project a separate warehouse is to be created. (In this case can we make the warehouse inactive after the project is completed, so that it will not be available in any transaction)
Kindly let me know the details & solution for above.
Thanks & Regards,
Yogesh Jadav.Dear Yogesh,
I would like to throw light on a couple of things you want to achieve. Certainly Projects are a great way to handle AR and AP transactions.
Since this is also extending to inventory in your case, adding Warehouses for each project can probably work but you should also consider the long term impact on the Business One application. Let us say you have 100 projects in a month, will you scenario require creating 100 warehouses.
If so, managing warehouses would become a daunting task.
If possible please share with my a little more in details the inventory side of business and I shall be glad to help you.
Best wishes
Suda -
In warehouse management how to post stock in the warehouse by using physica
hi
in warehouse management how to post stock in the warehouse by using physical inventory method
can anyone tell me the process in detail
thanksin advance.HI ,
In Ware house management you can block the stock for Physical Inventory purpose. You cannot post the stock to the warehouse using Physical Invenory.
If there is a count going on so the concerned Warehouse bin is to be blocked during Inventory so that no further goods movement is possible during that period.
Once the Physical Inventory ids done the block can be released so that the movement can again happen.
The Inventory mangement initiates the transfer requirement. This transfer requirement is used for creating the transfer orders. The transfer order confirmation is done then which actually places the stock in the concerned bin mentioned in the order.
The stock in WM can be checked in LX24/ LX26 which is same as theat of MMBE of MM.
Hope this helps.
Regards,
Prasanna
Award pls if helpful. -
Hello,
when i'am posting the stock into the plant, i'am getting an error-Account Determination for entry INT GBB-ZOB 3100 NOT POSSIBLE
CAN ANYBODY CLARIFY ON THIS PLS
Rgds/-
SAIRAMHi
T code OBYC give chart of accounts as internal and enter
select GBB and double click that
in the subsequent screen which is opening ,maintain necessary debit and credit accounts for 3100
Also in OMWD whether the valuation grouping code 0001 has been assigned to your plant
That also needs to be checked
If this is a real time issue take the help of MM and FI people
As all others said that posting stock for the first time you will face N no of challenges and you can search for solutions because these things are discussed enough no of times
Regards
Raja -
can someone help me out,while posting stock iam getting error
posting only possible in periods 2002/11 and 0000/00 in company code.
i know how to close periods in mmpv but here the error is i dont have specific periods to closeHi,.
Your curent month has not been intialised,
I assume that you are in a development system and not your live system.
Try transaction MMPI to initialise the period to the current one (I am assuming that you have no postings in the system so far because the date has not yet been set).
Steve B -
How do i unblock the G/L account for posting stock ?
I am trying to post stock into WM through MB1C with 561 in Dev sand box.It throws the following error.
G/L account 139999 blocked for posting in company code 2301
How do i unblock the G/L account for posting stock ?Hi,
Please try FSS0! (I hope this is it...)
(Accounting > Financial accounting > General ledger accounting > Master records > Individual processing > In Company Code)
Csaba -
Differences between stock transfer, transfer posting, stock transport order
Hi all,
what is the differences between stock transfer, transfer posting, stock transport order
cheers
bandhanHi Bandhan Roy
Stock transfer:
stock has been moved from one location to another. Here there is a physical movement must occured.
Transfer posting:
here may be or may not be physical movement is occured. but here the stock type is changed. transfer posting should affect the characteristci of a stock.
Stock transfer order:
We have to do transfer the stock through order is called stock transfer order...
regards,
sathes
Maybe you are looking for
-
Storing Persistent Data In A Flat File -- Design Ideas?
I have an application that needs to store a small amount of persistent data. I want to store it in a flat config file, with categories and key-value pairs. The flat file might look something like this: John: hair=green weight=170 Sally: eyes=blue wei
-
Sys.fn_xe_file_target_read_file performance
Hi, I am working with extended events and the function sys.fn_xe_file_target_read_file. I am using the file_name and file_offset to get new events, since the last time I queried the function. I am checking for new events once a minute like this: exec
-
How to display various content in a TableColumn
Hello, I would like to display in one column only the label of an object, and in the second column, based on the property of the object displayed in the first column, display a Text Field or a ChoiceBox. Is it possible with Cell Factories? If not, wh
-
Color not updating once back in Final Cut
I've ben able to get by with Color correcting in FCS by using the built in filters in FCP. Now I have some secondaries to work on so I've sent to Color and got everything looking the way I want. I render all, then send to FCS. It comes over and it do
-
I've looked everywhere and I'm surprised no one has reported this. So, it's a good chance I'm doing something wrong. When I want to scrub a midi track in piano roll, I click pause and place my pointer on the playhead and it just takes off wildly.