Posting to internal order via ME23n - PO

Hi,
I have set up the releavant budget profiles, linked to the internal order and activated the budget control via KO22 as well.
When posting to the internal order via FI, F-02, I can get the warning message set if I have burst the budget for the internal order. However, when i post to the internal order through PO, there was no warning message display when I saved the PO.
Why is this so ? Can the warning or error messge appears in the MM module when rasing the PO if the order has burst the budget ?
Please advise
Angel.

Hi Angel
Yes, its possible
1. Check if Commitment Management is active in your Contr Area in OKKP
2. Check if Commitment management is active in your int Order type
3. Specify a cost element in your PO..
BR,Ajay M

Similar Messages

  • Perform Payroll Posting using Internal Order

    Hi All,
    I would like to know what configuration that must be done to ensure that during payroll posting budget checking is performed using internal order.
    I already searched in all available resources but found nothing. I read SAP Note 648594 but I still do not understand how the integration is built. Now we use cost center as cost object instead of internal order, and in the new requirement user wants to perform payroll posting to cost center and also perform budget checking via internal order.
    For your information, I tried to maintained IT0027 and entered internal order with percentage 100% but when I posted the payroll result, expenses of the employee was posted to internal order instead of cost center.
    Thank you,
    Regards,
    MAL

    You may either enter in IT27, or against the position or org unit in PPOME.
    If you entered an internal order as 100%, then the posting will of course post to the internal order.
    regards

  • Payroll Posting to Internal order

    Hi,
    We are  not able to do payroll posting to defined internal order for one PERNR.
    We have maintned IT 0027, IT 315 for that EMP.
    Within IT 0027 we have maintained Master cost center(default from IT 0001),Co code, Internal Order number .
    But while doing payroll posting system is not posting payroll results to defined Internal order as per IT 0027. Amount is getting posted to Cost center as per IT 0001.
    Please advice us what config/ tables need to check for proper payroll posting to Internal orders.
    Regards,
    Pradeep.

    Hello Pradeep,
    IT 0027 is for cost distribution and if you maintain correct distribution rule and correct orders there the system should post to the specific order. However, you may check the order master data to find out whether the order is released for postings and also check that the order is not statistical.
    Kind Regards // Shaubhik

  • Posting settled internal order costs to PM Order

    Hi,
    Our client doesn't have PM module upto now. So they posted all the maintenance costs to internal orders. All the internal orders are settled properly. Now they want to implement PM module. They want the costs previously posted in internal order should be reflected in PM orders.
    How it will possible?  Any inputs please.. is the historical PM order helps???
    Regards
    Radha

    Radha,
    Technically speaking, yes its possible.
    But do you know which costs were booked against each equipment?
    Even if you do, then you will need to write an ABAP program to create PM orders and then move the costs from the settlement orders to the PM orders in the period thatg they were accrued. This is a big job.
    If you only need a record of the equipment costs (ie not move the actual costs) then the simpler approach would be to use Historical Orders.
    PeteA

  • Recurring posting with Internal Order

    Dear Team,
    I want to create a service purchase order for 1 year and down payment is made for entire amount. How can i monthly book the expenses automatically. I need to post a service entry sheet and invoice automatically for every month. is it possible through internal order.
    Regards
    Rajesh Kumar

    Thanks but it will help in automatic posting of service entry,invoice every month.
    regards
    rajesh

  • Foreign currency posting to Internal order and settlement

    Hi All,
    The payment posted to an internal order was in a foreign currency then translated into usd.  The settlement used a different exchange rate so in usd there was a balance.
    How do we rectify this..?
    Regards
    Ashok PRabhu

    Hi
    I am not sure how IS-H works.. But for sure, it should allow you to enter 3 stat objects...
    There would be some ABAP trick pertaining to IS-H which I am not aware of...
    I can guide you a bit...  During SD billing, ask abaper to put a break point and manually enter the values for cost center and IO and then post the doc.... One of these 2 will be the outcomes
    a. Either it will get posted or
    b. It will get over written before posting....
    based on the outcome, you will have to decide your next course of action
    Also, if your cost center to IO is one to one mapping (Chances would be rare), you can simply write a substitution which would always prevail
    I am sorry I could not offer you a complete solution.. But, this is what comes to my mind...
    Regards
    Ajay M

  • FB50 posting to internal order not possible.

    I have another problem. We wanted to settle costs collected on internal orders to a balance sheet account. So I created a new order type, allocation structure, settle profile. But when I try to do fb50 and debit some expenses on this internal order I get a message "FI postings not allowed". Can you please help me with this.
    Thanks.

    Hi,
    You would not have released the Order.
    Once you release the order then only postings are possible.
    If you have released and still you are unable to post transactions:
    Then u need to check the status profile that you are using
    Please award points suitably
    Best Regards
    Surya

  • Revenue Posting to Internal Order (through VA01)

    Is it possible to post the revenue to an internal order using VA01 (rel. 4.7 level 27).
    Thanks
    Karla

    Hi,
    As per your query you can do the same but in case you have not reced the purchase order quantity then you have to go for make reverse entry to correct this.
    I will suggest you, do not configure this type of setting othewise you will never know the the difference value of your po and actual payment.
    Anil

  • Posting to Internal order

    Hi,
    I am trying to post transaction in f-02 for internal orders i created. But it's giving a message that " Cost/Profit center XXXXXXXX is not valid for Account XXXXXXX ( This is my Cost Element ) in FI ". Could some one help me out
    thanks for a early reply

    Hi,
    Looks like a custom message. Check if there is any validation defined in transaction OB28 with this message. If yes, do as per the prerequisite defined for that step.
    Hope this helps.

  • Post to internal order and cost center

    we want system show error message if user post to expense account 5****** with cost center and internal order together, i.e.
    we can only post to cost center or internal order, but can't be both, can it be done by co validation? or do we use user exit to do it? which user exit? thanks

    Hi,
    is the internal order a real order or a statictical one?
    Regards,
    Greta

  • FI posting to internal order

    Hi,
    I am posting invoice to internal order.  I am getting error that FI transaction is not allowed. Is there any setting to be made or any status that I have to chage.
    Thanks
    Moderator: Please, follow the instructions given in the error message. This is standard message referring to the current status of the order

    Hi ,
    Every Internal Order has a Order Type . KOT2_OPA. In the order type.. there is settlement profile (OK07).
    In the settlement valid receivers in settlement profile .. GL account is not valid for the order type used in your case .
    Please use a different order type for your internal order or change the settlement profile in transaction OKO7 .
    Please revert back for any further clarifications
    Regards
    Sarada

  • ME23N - Add PO creator to display of purchase order via ME23N

    Hi
    Could someone advise me how to add 'PO creator userid' to the display of purchase order via transaction ME23N  (field EKKO-ERNAM)
    any help much appreciated
    Thanks

    yes i had looked at that option but the field 'PO created by' is not an option there!!
    any other ideas....i am aware of the BADI option to add this using a userexit but thinking of more standard option to do it

  • Bill accounting assignment - statistical revenue posting on internal order

    Hello,
    I'm wondering if it is possible that revenues from a billing document can be posted as statistic revenues on internal orders while the 'real' revenues are posted into COPA.
    We would like to see the revenues directly in COPA as we we write more than one bill to different customers for development projects which we are controlling at the moment with internal orders. When we settle the internal orders the revenues are always going to one revenue object with one customer (depending on the settlement rule in the internal order) which is wrong. Nevertheless we need to see the revenues in the internal order in order to control the p/l of it.
    Thanks a lot in advance.
    BR,
    hansi

    Hi
    Account 7816040 requires an assignment to a CO object
    This is the message that appear everytime that I try to post to accouting.
    I add:
    1. VKOA - Define KOFK for this account
    2. OKB9 - To define which Cost Center for this particular Account
    3. Ka0s- Cost Center for this cost element
    4. IO - Statistical Internal Order
    Any futher suggestion to avoid this error message?

  • Substituion of profit center while posting to internal orders

    Dear experts
    Can anyone guide me to substitute a different profit center while posting to a real internal order.
    I tried substitution rules, user exits, etc.  Eventhough the control goes there, substituion is ineffective since profit center assigned to the internal order in its master data is getting replaced again.
    Any other work around is possible to achieve this.
    Thanks

    Find below your clarification for the points
    Why we assign cost center while posting to any G/L, even though we have been assign cost center to the cost element it will post the co entry through cost element.: Once you have assigned cost center to cost element in T.code OKB9 or KA01, no need of manually entering the cost center for the respecting primary cost GL while passing enteris.
    Please any one make me understand the internal logic and process of how cost element and cost center works.: Whenever you post a cost to primary cost element , you require an object in Controlling , such as cost center to identify the costs. This primary costs are only created when the respective GL exist in the operational chart. Cost center is the location where cost incurs. Thus when you assign the cost to cost center , the cost will be booked against that particular location .

  • Inheritance of internal orders via org units

    Hello,
    Are the internal orders(FICO) inherited from an org unit to its depending units? Do we need to activate any switch in T77S0 or is there another customizing point?
    Best regards,
    Karim

    Hi Marcin,
    Great day!
    If the reason of changing the settlement rule is you have to correct the previous one and that there has been a settlement before, then you can no longer change it. All you have to do is to double-click that settlement rule then fill-out the field - "valid to." Then create another one or a correct one.
    You may use the following BAPI/Function Module to update your settlement rule via the interface:
    K_SETTLEMENT_RULES_UPDATE
    Hope this helps.
    Thanks!

Maybe you are looking for