Posting to special stock while GR of consignment pickup is done

Hi Experts,
When GI for a consignment fill up is done, it takes place with a movement type of 631 (Unrest stock to customer consignment).
But when GR for consignment pickup for this fillup is done, it takes place with a movement type of 632E (Customer consignment to Sales Order Stock). I want to know why and how the special stock indicator (E) is getting picked while doing GR.
I have checked the configuration of the schedule line category (F1), which has a movement type of 632, and that of item category (KAN) which has blank in Special Stock Indicator. 
I have also checked the movement type configuration of 632, which does not say to default 'E' for 632 movement.
Did I miss something... Awaiting Your valuable inputs.
Rgds,
Birendra

check the strategy group in material master-mrp3.
'e' might be assigned in strategy group

Similar Messages

  • PCA posting for Special stock through WBS element

    Hi,
    The scenario consists of special stock transfer from one plant to another through the WBS element. The PR is getting generated from PS. the issue that I am facing is that the PCA document is showing a posting being made to a GL account which is different from that being specified in 0KEK.
    I would appreciate if any body can shed some light on how to tackle it?
    Regards
    Kabir

    Hi Shekhar
    In order to settle project to Asset you have to ensure that you have an asset class  which has a tick for investment measure.  once you create an asset class which manages investment measure , you should be able to that particular asset class. you can then further settle asset from this asset class to any other asset class.
    hope this help you
    thanks
    sanjeev

  • Posting to QM stock while goods receipt

    Hi
    What are all the options we have to post the goods to Quality stock category at the time of goods receipt?
    I know off
    A. In material master, purchasing view - post to inspection stock is active
    B. If QM control key is active
    What are the other possibilities?
    Thanks
    RJS

    Hi,
    In Material master we need to maintain "Post to inspection" and respective inspection types say for example 01 inspection type for Purchase order.
    Maintain Quality inspection plan using QP01 for the respective material.
    When a PO is created for the material having QM activated , in delivery tab Stock type will be automatically set as "Quality inspection". If you want to post to Quality stock without quality management activated for a material , then while doing MIGO select the stock type as "Quality inspection" in the where tab.

  • Transfer posting to special stock sales order with different material

    I am able to MB1B a material  (Transfer posting) using mvt 412 E and transfer from own stock to sales order stock ,where Sales order belongs to a different material.
    It should not allow posting to a "E" stock to a sales order of different material. (anyway system allows that without any warning/error?)
    MB1B:Only stock type change (within same storage location).

    Hi ,
    I tried replicating your Query and observed it as a standard Behaviour
    When you use 412 E  for posting stock to sales order , system is not validating whether the Material is available in Sales order or
    Material Check is only happening against the Plant and storage location but not at sales order level
    if you want the check to happen, may be you can try to put a code in this Include
    MGV_MATNR_LAMA_SAPLMATL which will Read the Material
    regards,
    santosh

  • Restrict MIGO_GI at movement with Special Stock

    Hi,
    We need restriction in T-code: - MIGO_GI or MB1A.
    In MIGO_GI there restrict GI for cost center with Special Stock
    And MB1A there also show Special Stock.
    Do you any possibility to restrict movement with Special Stock.
    Amit

    not exactly. no.
    you can restrict the posting of special stock by granting/denying authorisations for movement types but no more. binding the movement type to an obligatory field 'cost center' is not a matter of authorisations, but of configuration - check transaction OMJN/OMJX et all on the how-to. that still would leave open that everybody can choose a random cost-center deliberately, so you have to use an additional enhancement/exit there ...

  • Special stock and movement type

    Good morning to all,
    I create a type movment copyed from the 262 but I don't need to post in special stock for this movement.
    Is possible do disable special stock posting for a movement type?
    Thanks in advance to all
    Best regards
    Carlo

    Hi,
    Goto OMJJ,
    Select your movement type.
    Choose option 'Allowed transaction"
    & make necessary changes.
    Regards,
    Piyush

  • Special stock partner data problem in ERP system during "Post Goods issue"

    Hi all,
    I have a (probably) customizing issue in an ERP 6.0 EhP4 test system which not occurs in the ERP 6.0 test system. There is a difference but no one could tell me, what causes the problem in this scenario:
    I have two customers, C1 and C2. C2 is the special stock partner (SB) of C1.
    I've created a Consignment Fill-up order, then a delivery document based on the order and posted it with "Post Goods Issue". During the update process, a function module (SD_PARTNER_UPDATE) receives partner data in an internal table which contains the sold-to, ship-to and special partner data.
    When we tried the same process in the ERP 6.0 EhP4 test system then special-partner data did not occur in the parameter table (I've used the same customers and materials). The special stock partner is probably not taken into consideration due to some customizing settings.
    My question is what should I change in the customization to run the process the same way as in the ERP 6.0 system? As far as I know there are no new modifications which have effect on this area, and the used test customers and materials are almost the same - there are no noticable differences.
    Thanks in advance.
    Akos

    I tried setting that field in the sale order this morning.  By defaulting it to "C"; I was able to get warning message for TAE line.  I was able to post goods with TAE and TAQ, being different quantities.  I need the check to determine if TAE and TAQ delivery quantity are different.  Using this fields seems to be line specific.  Thanks for the suggestion.  I now know what that field does to the delivery.
    I rewarded points.
    Thanks,
    Tony

  • Special stock value problem while production entry

    Dear Gurus,
    One of my client using special stock scenario (E), here in one of the case while producing the special stock through production
    the system posted production entry in that the FG and COGM value system taking rs 28.30 for one number, where as in the
    material master the standard price is maintained at 471.12 for one number.
    I observed one thing during this special stock system not considering standard price as well as moving avg price it is taking price from somewhere i am not able understand where the system taking this price i checked sales order condition value and all but no where this price is mentioned.  I want to know in case special from where system considers the price.
    where as normal stock everything is fine., please help me in this regard.
    Regards
    Sreenvias.P

    Hi,
    Do you have any Co Component in your system. If marking operation is done the standard price changes acording the production cost.
    Check the tables:
    Goto SE16
    Enter the below tables and execute.
    WRMA_V_MBEW
    Regards,
    Kishore K

  • Error while PGI... Special stock 2010 Q  for this mat. does not exist

    Hi friends,
    While PGI system is showing error that particular material, and wbs element special stock Q in sloc 2010 stock does not exist.....
    But stock is present.....
    I hve checked all relevant things reg..... stock and reservation...
    We are facing this issue for PGI for free of charge.........
    Plz. help......
    Thanks
    Navin

    Hi,
    Please check in MB52 whether the stock of your material belongs to special stock 'Q' + relevant WBS_ID. If your stock level is high enough but the goods are not under the WBS' special stock you cannot post goods isue I guess...
    Csaba
    Edited by: Csaba Szommer on Jun 9, 2008 5:13 PM

  • Error while posting batch managed stock in 107 movement type?

    Hi All,
    Error while posting batch managed stock in 107 movement type in MIGO, like 'Goods movement not possible with mvmt type 107'
    and here in batch tab batch number is not displaying only valuation type is displaying, kindly let me know can it be done by doing any change in field selection with respect to 107 movement type
    regards,
    Sanjana

    Hi,
    spro-inventory management-setting for enjoy transaction-setting for goods mvt--field selection per mvt type
    107     SGTXT
    107     WEMPF
    Check here 107 mvt type there or not if not then put.
    101     CUSTNAME
    101     GRUND
    101     SGTXT
    101     WEMPF
    102     SGTXT
    102     WEMPF
    103     SGTXT
    103     WEMPF
    104     SGTXT
    104     WEMPF
    105     SGTXT
    105     WEMPF
    106     SGTXT
    106     WEMPF
    107     SGTXT
    107     WEMPF
    108     SGTXT
    108     WEMPF
    109     SGTXT
    109     WEMPF
    110     SGTXT
    110     WEMPF
    Regards
    Rakesh

  • Error while adjusting the Consignment Stocks

    Dear Forum,
    We have come accross an error while adjusting the Consignment Stocks. The error is "Field selection for movement type 701/acctt xxxxxx differs from Customer goods movement (015)". What do we need to check the resove this error and what additional maintenance is required to be done.
    Would appreciate the help for resolving this.
    Regards

    Hi Raj,
    For those transactions that are processed through MB1A, MB1B, and MB1C a check is made on both tables T004F (FI) and T156B (MM).
    These tables define what data is 'mandatory', 'optional', or 'display only' when the transaction is processed.
    There are certain fields (like the one you have met, the "Customer goods movement") that are contained on both tables.                                                                               
    For these kind of fields that are in both tables, the field selection must be the same: Since the data is processed through a single dynpro,  the system must have only one instruction for a data field. This is why the message M7093 is being generated when, for example, optional is specified for MM and required is specified for the General ledger.                                                                               
    Use report RM07CUFA to change the appropriate field setting. Compare the tables above to see which field may be set to required vs optional for the movement type/ account and change it accordingly.                                                                               
    The SAP Note 9281 gives a more detailed explanation of this.          
    I hope this information helps you.
    Esther.

  • Special stock returning to plant but post it to QM stock.

    Dear all ,
    Is it possible to make movement type 542 via MIGO and 632 via VL02N relevant to return material from Vendor (special stock O) and Customer (special stock W) relevant to put material directly in QM to be analised ?
    best regards,
    Ale

    542:
    MB11     Goods Movement
    MB1B     Transfer Posting
    MB26     Picking list
    ME2O     SC Stock Monitoring (Vendor)
    MIGO     Goods Movement
    VL02N     Change Outbound Delivery
    VL09     Cancel Goods Issue for Delivery Note
    VL32N     Change Inbound Delivery
    632 :
    MB11     Goods Movement
    VL01     Create Delivery
    VL01N     Create Outbound Dlv. with Order Ref.
    VL01NO     Create Outbound Dlv. w/o Order Ref.
    VL02     Change Outbound Delivery
    VL02N     Change Outbound Delivery
    VL03N     Display Outbound Delivery
    VL08     Confirmation of Picking Request
    VL09     Cancel Goods Issue for Delivery Note
    VL32N     Change Inbound Delivery
    For the special type like (special stock O) and Customer (special stock W) it is possible to process through this tcodes.
    Regards
    Sujit

  • Transfer consignment stock between special stock partners

    Dear Friends,
    we have a scenario wherein i have two special stock parnter defined for the consignment stock processing. i want to transfer some material from one stock partner to another stock partner.
    can someone help regarding this scenario.

    Dear rahul patil
    To reduce special stock for a particular sold to party, you can use MB1A / 291W so that it will ask for customer code, where you need to define the sold to party.  Similarly to add stock, you can use MB1A / 292W.  But b4 doing this, check in development and get concurrence with your FI people also for accounting implications.
    thanks
    G. Lakshmipathi

  • Error Enter a vendor special stock " O"   sales delivery while doing pgi

    hi
    I am using job work scenario that time total stock provide by the customer. After completion the production process i am going for the delivery that time the massage come " Enter a vendor for special stock "O". But the total scrap is showing in the storage location but not picking in at the time delivery..
    pl give me helpful answer ?
    Thanks & Regards
    Edited by: sachin  hadke on Dec 26, 2008 12:57 PM

    Dear Sachin
    May be in partner determination, special stock partner would have been made as mandatory. Try in delivery screen itself, click from top menu bar click on "goto -- header -- partners". There select "Special Stock partner", maintain the vendor code and try to do PGI
    thanks
    G. Lakshmipathi

  • Consignement and Pipeline Special Stocks

    Pipeline material purchase along with the accounts and movement types envolved in the process?
    Consignment Cycle including the Account and movement types  envolved in it?
    Best Regards,
    Kapil

    Hi
    Pipeline & Consignment Process is little bit different from the Standard one
    First of all you will have to create info record for Pipeline and Consignment and after that the PO with Account assignment Category K
    do the good receipt with mvt type 101 P and 101 K for both Pipeline and Consignment PO respectivey
    and do the settlement through MRKO (Pipeline and Consignment settlement)
    This is the complete Process for Pipeline & Consignment Cycle
    as far as account hitting is Concerns
    at the time of Good receipt (Unrestricted use stock)in Case of Consignment, Stock account will get Debited and GR/IR account will get Credittes
    at the time of MRKO
    GR/IR account will get Dedited and Vendor Account will get Creditted
    Thanks

Maybe you are looking for

  • BW 3.5 Replacement path

    Hi Gurus, I 'm currently using a BW version 3.5 and I need to convert units of measure so I'm following the guide "HOW TO REPORT DATA IN ALTERNATE UNITS OF MEASURE". 3.1) I created one key figure YUOMCNVF (COnversion Factor) that is QUAN with Unit 0B

  • IMac DVD player crashes as soon as DVD is put in.  On Mountain Lion 10.8.2

    I insert DVD, and BOOM DVD player pops up with a really LOOONG error message.  I have had this iMac less than a month, and played a DVD on it last Friday perfectly fine.  Thoughts? This is what the error message states: Process:         DVD Player [3

  • CD drive problems "Directory doesn't exist"

    Seems like everybody has some variant of this problem.  I'm having difficulty getting the CD drive to read the disks I put in.  I'm using PCman as my file manager and when I try to access the CD drive I get a pair of error messages that simply say ".

  • Windows does not want detect my DVD drive

    I do have HP Pavilion dv7-1133cl after uisng Windows Recovery my Windows Vista does not want to recognize DVD drive. When I have followed all advices what I have read here on chats I have find message: Windows cannot load the device driver for this h

  • Type conflict when calling a FORM

    Hi, when we have callled function module "PYXX_READ_PAYROLL_RESULT" in out HR-ABAP program then shows the short dump as: procedure "PYXX_READ_PAYROLL_RESULT" "(FUNCTION)", nor was it propagated by RAISING clause. Since the caller of the procedure cou