Posting trends and analysis

I think I've made this comment before, but I'll go ahead and make it again.
I certainly hope some of the tech support and usability people at Apple are doing some analyses of the posts in this forum. I'm not asking them to read the posts . They just need to do some trending and counting. For example, in the group I like to troll, "Mac OS X Technologies", there are 50 posts listed on the overview page. 28 of those posts are in the iSync category. Therefore, iSync causes more problems than Audio, AppleScript, Classic, Networking and the Web, Unix, and Software Development combined.
Just an observation...
I'll go back to arguing about cloning and backup options now until someone posts something interesting in Developer.

etresoft,
A statistician once said: if you can't see a simple relation, statistics won't help. Your comment seems a resonable way to draw Apple's attention to serious problems.
I can't speculate about Apple policy, but I'm not surprised that iSync problems dominate. Cloning can be a problem, restoring a backed-up file tragic, but syncing multiple computers can be a disaster. My advice to family has been to stay away from 'iSync'. This, I admit, was based upon the early releases. It may be safer now.
In the early 1980s I wrote a 'sync' program for a law firm and saw the problems. I ultimately decided to delete no files, but simply mark them as 'Retired on 'date' (requiring attention). Like backup strategies & restores, the synchronization of computers requires a very careful study before implementing.
So, I have to agree with both the general suggestion in your original post; and your conclusion about the particular example you chose.
Bruce

Similar Messages

My 3D And Analysis menus have gone missing in my PS CS4 Extended

Hopefully this is the correct place to post this. I have PS CS4 Extended version, and I had the 3D and Analysis menus like it's supposed to have, and now for some reason, they have gone missing, they are not there in my top menu items anymore, there are 9 there now instead of 11, I just noticed this recently, and when I open the program, on the splash screen, it just says Adobe Photoshop CS4, and not Adobe Photoshop CS4 Extended like it used to, is there any explanation for this? I have it installed on my laptop, which is a hp dv6 1360us, and it does have the proper hardware to handle 3D and the sort and there have been no changes to that, so that really can't be the issue. I do remember using ccleaner about a week or 2 ago to clean up my computer and in doing so I accidently removed a few files that had photoshop in the filename, registry files, so could I possibly have messed up my photoshop by removing those files? I don't really know. I did a system restore, and got those files back, and I have tried uninstalling and reinstalling my version of photoshop, and I still have the same problem. If anyone could possibly help me sort this out it would be awesome and I'd really appreciate it.

Was this a 30 day trial download of PS CS4 extended and maybe you purchased, from Adobe, PS CS4 (not extended) serial number and entered that?
the serial number that is entered determines if PS CS4 is Extended or not.
I would contact Adobe Customer service. There is nothing anybody can do on here with a serial number problem.

Hyperion Reporting and Analysis

Hello Gurus,
So I installed Hyperion (11.1.2.2) foundation services(all componants), essbase(all componants), planning (all componants. well, it was only one componant), Reporting and Analysis framework (web application, services and common libraries. i installed only these two because hyperion planning depends on them), financial management ADM driver (chosen by default when i want to install hyperion reporting and analysis). i installed them and configured them all togather. I'm using a Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production on Windows 2008 SP2 32bits.
Configuration of Reporting and Analysis framework failed, and that caused several problems when i ran the EPM system Diagnosis. this is what i got. Note: I'm gonna list only the errors/warnings in anything other than reporting and Analysis. as for reporting and analysis, i'm gonna list everything. sorry it's so long....
Hyperion Foundation
FAILED HTTP: HTTP Checking availability of HTTP context http://DC-HYPERIONT01:19000/raframework/index.jsp
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
0 seconds
EPM System Registry
FAILED REG: Registry Next issues are present:
LOGICAL_WEB_APP (id: fa67b59381bd8c85S4cc267951398ff60006S73df):
"webAppType" property missed
"context" property missed
"port" property missed
"SSL_Port" property missed
"isSSL" property missed
"host" property missed
"" child missed
RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S7bc8):
"applicationId" property missed
"RA_PRODUCT" parent missed
RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S74c6):
"applicationId" property missed
"DATABASE_CONN" child missed
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
Financial Reporting
FAILED REG: Datasource Checking if datasource property exists in the registry
Error: ORA-00942: table or view does not exist
Recommended Action: Refer to the validation logs for exception details.
0 seconds
Reporting and Analysis
FAILED CFG: Configuration Validating that configuration tasks have been completed
Error: EPMVLD-01004: The following configuration tasks have not been completed:
FrameworkServicesConfiguration: Configuration Failed
Recommended Action: Attempt to configure referenced tasks
0 seconds
PASSED DB: Database Connectivity Checking connection to database jdbc:oracle:thin:@dc-hypdbt01.nuqulgroup.loc:1521:hybdb
0 seconds
PASSED SVR: Essbase Java API Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect ****** DC-HYPERIONT01:1423 Embedded
5 seconds
PASSED EXT: External Authentication Check Native Directory external authentication provider configuration
0 seconds
PASSED REG: Configuration Checking if product has only one product node in registry.
0 seconds
PASSED RA: Reporting and Analysis Check if Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
0 seconds
FAILED RA: Reporting and Analysis Check if all required RAF properties exist under the RAF Logical Web App component.
Error: Some required properties are not found in the RAF Logical Web App component: WebClient.SmartPages.DefaultSmartPage.PreconfiguredCategories, WebClient.SmartPages.ColorScheme.ColorScheme1.BackgroundColor, WebClient.Applications.DAServlet.OpenNewWindow, WebClient.UserInterface.Localization.localLanguageCode, WebClient.SmartPages.ColorScheme.ColorScheme2.HeaderColor, WebClient.Cache.Objects.HeadlinesPageTTL, WebClient.SmartPages.ColorScheme.ColorScheme0.FooterColor, WebClient.Internal.Cookies.EncryptCookies, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizard, WebClient.SmartPages.ColorScheme.ColorScheme0.HeadingColor, WebClient.UserInterface.Localization.localCountryCode, WebClient.Cache.Domain.DomainInfoTTL, WebClient.SmartPages.ColorScheme.ColorScheme3.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.Name, RCPDirectoryURL2, WebClient.Cache.Objects.CategoryCacheSize, WebClient.UserInterface.JobOutput.MIMETypeToDisplayForSQRProgramOutput, WebClient.Cache.Objects.TaskListingTTL, WebClient.Cache.Objects.CategoryTTL, SmartViewContext, WebClient.Internal.Transfer.PassDCByStream, WebClient.SmartPages.ColorScheme.ColorScheme2.FooterColor, WebClient.SmartPages.ColorScheme.ColorScheme2.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.HeaderColor, OfficeAddinSupport, WebClient.SmartPages.ColorScheme.ColorScheme0.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeaderColor, WebClient.Applications.iHTML.PollingTimeSec, WebClient.SmartPages.ColorScheme.ColorScheme3.LeftColor, WebClient.Cache.Objects.CacheModifyTTL, WebClient.SmartPages.ColorScheme.ColorScheme1.LeftColor, WebClient.Cache.Objects.CacheListTTL, WebClient.UserInterface.Subscription.ShowSubscriptions, WebClient.SmartPages.ColorScheme.ColorScheme2.LeftColor, WebClient.Diagnostics.Log.Configuration, WebClient.UserInterface.JobOutput.ShowHTMLOutputForSQRPrograms, WebClient.UserInterface.Localization.ShowTimeOrder, WebClient.Applications.DAServlet.DASResponseTimeout, WebClient.Applications.DAServlet.PollingTimeSec, WebClient.UserInterface.Localization.localVariant, WebClient.SmartPages.ColorScheme.ColorScheme0.LinkColor, WebClient.UserInterface.SmartCut.ShowAsLink, WebClient.SmartPages.ColorScheme.ColorScheme3.BackgroundColor, WebClient.UserInterface.JobOutput.ShowSPFOutputForSQRPrograms, WebClient.SmartPages.ColorScheme.ColorScheme3.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme3.LinkColor, WebClient.SmartPages.General.MaxNumberOfInitializedFromPublished, WebClient.Internal.Upload.MaxFileSize, WebClient.SmartPages.ColorScheme.ColorScheme2.RightColor, WebClient.SmartPages.ColorScheme.ColorScheme3.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme1.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme2.HeadingColor, WebClient.UserInterface.Localization.ShowDateOrder, WebClient.Cache.Objects.BrowseQueryTTL, RelatedContentProtocol, WebClient.Cache.Objects.PublishedSmartPagesQueryTTL, WebClient.CorporateWorkspage.Folder, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainFrame, WebClient.SmartPages.Publish.Location, WebClient.SmartPages.General.MaxNumberOfSmartPages, WebClient.SmartPages.ColorScheme.ColorScheme2.Name, WebClient.SmartPages.ColorScheme.ColorScheme3.Name, WebClient.SmartPages.DefaultSmartPage.DefaultColorScheme, WebClient.Cache.Objects.CacheListSize, WebClient.UserInterface.Configuration.EnableMSReportsIntegration, WebClient.SmartPages.ColorScheme.ColorScheme2.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.RightColor, WebClient.Internal.Temp.Location, WebClient.SmartPages.ColorScheme.ColorScheme0.BCMessagesColor, WebClient.Applications.iHTML.BQServiceResponseTimeout, RAFVersion, customSmartcutUrl, WebClient.UserInterface.PortalColor.MainFrame.Title.ColorMainTitleUnderline, WebClient.SmartPages.ColorScheme.ColorScheme1.FontColor, WebClient.Applications.iHTML.DiskCachePollingPeriod, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizardBorder, WebClient.Cache.Objects.JobTTL, WebClient.SmartPages.General.ShowHeadings, WebClient.SmartPages.ColorScheme.ColorScheme3.FooterColor, WebClient.Applications.DAServlet.ZAC, Folder0, WebClient.SmartPages.ColorScheme.ColorScheme3.RightColor, WebClient.Cache.Notifications.NotificationQueryTTL, WebClient.Internal.Cookies.KeepCookiesBetweenBrowserSessions, WebClient.SmartPages.DefaultSmartPage.ShowBookmarks, WebClient.SmartPages.DefaultSmartPage.PreconfiguredEmbeddedObjects, WebClient.Cache.Browse.JobOutputSummaryListing, WebClient.SmartPages.DefaultSmartPage.ShowExceptionsDashboard, WebClient.SmartPages.ColorScheme.ColorScheme0.Name, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainLinkFont, WebClient.SmartPages.ColorScheme.ColorScheme3.HeaderColor, WebClient.Internal.Redirect.RedirectPolicy, WebClient.SmartPages.ColorScheme.ColorScheme0.LeftColor, WebClient.SmartPages.ColorScheme.ColorScheme1.RightColor, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainFont, WebClient.SmartPages.ColorScheme.ColorScheme1.FooterColor, WebClient.UserInterface.Localization.Show24HourTime, WebClient.SmartPages.ColorScheme.ColorScheme0.FontColor.
Recommended Action: Ensure that you ran the config tool and configured the RAF Web App component.
0 seconds
FAILED RA: Reporting and Analysis Check if the Agent (AGENT) components exist.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
WARNING RA: Reporting and Analysis Checker execution failed.
Check if RAF Services are available.
No RAF Services (Agent Module) components found in Registry.
0 seconds
PASSED RA: Reporting and Analysis Check if Job Factory data folder exists.
Data file locations are valid.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module is associated with some Agent.
Every Agent Module is associated with some Agent.
0 seconds
FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Setup (RA_SETUP) component exists.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis component.
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Web App (RA_FRAMEWORK_WEB_APP) components exist.
Found: 1. Hosts for the components: DC-HYPERIONT01.
0 seconds
FAILED RA: Reporting and Analysis Check consistency of the Service Agent sets between Registry and V8_SERVICEAGENT.
Error: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
FAILED RA: Reporting and Analysis Check consistency of the Service Agent properties between Registry and database tables (V8_SERVICEAGENT, V8_SA_PROPS).
Error: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
PASSED RA: Reporting and Analysis Check if Agent Modules and corresponding Agents belong to the same host.
Agent Modules and corresponding Agents belong to the same host.
0 seconds
WARNING RA: Reporting and Analysis Checker execution failed.
Check if all required RAF properties exist under the Reporting and Analysis Setup component.
The Reporting and Analysis Setup component is not found.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
Every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
0 seconds
PASSED RA: Reporting and Analysis Check if Service Broker data folder exists.
Data file locations are valid.
0 seconds
FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Service (RA_SERVICE) components exist.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
FAILED RA: Reporting and Analysis Check if the Agent Module (AGENT_MODULE) components exist.
Error: Components not found.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
PASSED RA: Reporting and Analysis Check if all required Workspace configuration files exist under the RAF Logical Web App component.
All required files exist.
0 seconds
WARNING RA: Reporting and Analysis Checker execution failed.
Check if Agents are available.
No Agent components found in Registry.
0 seconds
PASSED RA: Reporting and Analysis Check if every Reporting and Analysis Service is associated with some Agent Module.
Every Reporting and Analysis Service is associated with some Agent Module.
0 seconds
PASSED RA: Reporting and Analysis Check if Event Server data folder exists.
Data file locations are valid.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent is associated with some Agent Module(s).
Every Agent is associated with some Agent Module(s).
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Logical Web App (LOGICAL_WEB_APP) component exists.
Found: 1.
0 seconds
PASSED RA: Reporting and Analysis Check if Repository data folder exists.
Data file locations are valid.
0 seconds
FAILED WA: Essbase connectivity Check connectivity between Web Analysis Server and Essbase Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Essbase Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: HFM connectivity Check connectivity between Web Analysis Server and Financial Management Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Financial Management Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: Login Check the possibility to login on Web Analysis Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that Web Analysis Web Application is configured and started.
0 seconds
PASSED WEB: Web Application Availability of Web application context http://DC-HYPERIONT01:9000/WebAnalysis
0 seconds
Many Many thanks in advance,
Zain

Hello Krishna,
yes, looks like i didn't have moduke 7 downloaded. however after i did and installed it, i still got the following errors that seemed to do with connectivity to RAFRAMEWORK and it's database. I am going to list errors in all modules, except for Reporting and Analysis, i'm going to post everythign else.
Hyperion Foundation
FAILED HTTP: HTTP Checking availability of HTTP context http://DC-HYPERIONT01:19000/raframework/index.jsp
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 404
Recommended Action: Check that the application is started
0 seconds
EPM System Registry
FAILED REG: Registry Next issues are present:
LOGICAL_WEB_APP (id: fa67b59381bd8c85S4cc267951398ff60006S73df):
"webAppType" property missed
"context" property missed
"port" property missed
"SSL_Port" property missed
"isSSL" property missed
"host" property missed
"" child missed
RA_FRAMEWORK (id: fa67b59381bd8c85S4cc267951398ff60006S74c6):
"applicationId" property missed
"DATABASE_CONN" child missed
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
Financial Reporting
FAILED REG: Datasource Checking if datasource property exists in the registry
Error: Datasource property raframeworkDatasource not found.
Recommended Action: Fix failure manually with epmsys_registry tool.
0 seconds
FAILED REG: Datasource Checking if datasource property exists in the registry
Error: Datasource JNDI property raframeworkDatasourceJNDI not found.
Recommended Action: Fix failure manually with epmsys_registry tool.
0 seconds
Reporting and Analysis
PASSED CFG: Configuration Validating that configuration tasks have been completed
0 seconds
PASSED DB: Database Connectivity Checking connection to database jdbc:oracle:thin:@dc-hypdbt01.nuqulgroup.loc:1521:hybdb
0 seconds
PASSED SVR: Essbase Java API Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect ****** DC-HYPERIONT01:1423 Embedded
6 seconds
PASSED EXT: External Authentication Check Native Directory external authentication provider configuration
0 seconds
PASSED REG: Configuration Checking if product has only one product node in registry.
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Web App (RA_FRAMEWORK_WEB_APP) components exist.
Found: 1. Hosts for the components: DC-HYPERIONT01.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
Every Agent Module (except IR Log) is associated with some Reporting and Analysis Service(s).
0 seconds
PASSED RA: Reporting and Analysis Check if IR BI Services are available.
All IR BI Services are available: IRBI_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if the Reporting and Analysis Service (RA_SERVICE) components exist.
Found: 37.
0 seconds
PASSED RA: Reporting and Analysis Check if the Agent (AGENT) components exist.
Found: 1. Hosts for the components: DC-HYPERIONT01.
0 seconds
FAILED RA: Reporting and Analysis Check consistency of the Service Agent properties between Registry and database tables (V8_SERVICEAGENT, V8_SA_PROPS).
Error: There is inconsistency between Registry and V8_SERVICEAGENT for the following items: JF1, SB1, RM1, ES1.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis Service component.
0 seconds
PASSED RA: Reporting and Analysis Check if Service Broker data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if the Agent Module (AGENT_MODULE) components exist.
Found: 6.
0 seconds
PASSED RA: Reporting and Analysis Check if Repository data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if IR Job Services are available.
All IR Job Services are available: IRJOB_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
Reporting and Analysis Services and corresponding Agent Modules belong to the same host.
3 seconds
PASSED RA: Reporting and Analysis Check if RAF Services are available.
All RAF Services are available: RAF_AGENT_MODULE (Agent on dc-hyperiont01), RAF_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if IR Log Services are available.
All IR Log Services are available: IRLOG_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if all required Workspace configuration files exist under the RAF Logical Web App component.
All required files exist.
0 seconds
PASSED RA: Reporting and Analysis Check if every Reporting and Analysis Service is associated with some Agent Module.
Every Reporting and Analysis Service is associated with some Agent Module.
1 seconds
PASSED RA: Reporting and Analysis Check consistency of the Service Agent sets between Registry and V8_SERVICEAGENT.
Data in Registry and database are consistent.
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent is associated with some Agent Module(s).
Every Agent is associated with some Agent Module(s).
0 seconds
PASSED RA: Reporting and Analysis Check if every Agent Module is associated with some Agent.
Every Agent Module is associated with some Agent.
0 seconds
FAILED RA: Reporting and Analysis Check if all required RAF properties exist under the RAF Logical Web App component.
Error: Some required properties are not found in the RAF Logical Web App component: WebClient.SmartPages.DefaultSmartPage.PreconfiguredCategories, WebClient.SmartPages.ColorScheme.ColorScheme1.BackgroundColor, WebClient.Applications.DAServlet.OpenNewWindow, WebClient.UserInterface.Localization.localLanguageCode, WebClient.SmartPages.ColorScheme.ColorScheme2.HeaderColor, WebClient.Cache.Objects.HeadlinesPageTTL, WebClient.SmartPages.ColorScheme.ColorScheme0.FooterColor, WebClient.Internal.Cookies.EncryptCookies, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizard, WebClient.SmartPages.ColorScheme.ColorScheme0.HeadingColor, WebClient.UserInterface.Localization.localCountryCode, WebClient.Cache.Domain.DomainInfoTTL, WebClient.SmartPages.ColorScheme.ColorScheme3.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.Name, RCPDirectoryURL2, WebClient.Cache.Objects.CategoryCacheSize, WebClient.UserInterface.JobOutput.MIMETypeToDisplayForSQRProgramOutput, WebClient.Cache.Objects.TaskListingTTL, WebClient.Cache.Objects.CategoryTTL, SmartViewContext, WebClient.Internal.Transfer.PassDCByStream, WebClient.SmartPages.ColorScheme.ColorScheme2.FooterColor, WebClient.SmartPages.ColorScheme.ColorScheme2.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.HeaderColor, OfficeAddinSupport, WebClient.SmartPages.ColorScheme.ColorScheme0.BackgroundColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeaderColor, WebClient.Applications.iHTML.PollingTimeSec, WebClient.SmartPages.ColorScheme.ColorScheme3.LeftColor, WebClient.Cache.Objects.CacheModifyTTL, WebClient.SmartPages.ColorScheme.ColorScheme1.LeftColor, WebClient.Cache.Objects.CacheListTTL, WebClient.UserInterface.Subscription.ShowSubscriptions, WebClient.SmartPages.ColorScheme.ColorScheme2.LeftColor, WebClient.Diagnostics.Log.Configuration, WebClient.UserInterface.JobOutput.ShowHTMLOutputForSQRPrograms, WebClient.UserInterface.Localization.ShowTimeOrder, WebClient.Applications.DAServlet.DASResponseTimeout, WebClient.Applications.DAServlet.PollingTimeSec, WebClient.UserInterface.Localization.localVariant, WebClient.SmartPages.ColorScheme.ColorScheme0.LinkColor, WebClient.UserInterface.SmartCut.ShowAsLink, WebClient.SmartPages.ColorScheme.ColorScheme3.BackgroundColor, WebClient.UserInterface.JobOutput.ShowSPFOutputForSQRPrograms, WebClient.SmartPages.ColorScheme.ColorScheme3.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme3.LinkColor, WebClient.SmartPages.General.MaxNumberOfInitializedFromPublished, WebClient.Internal.Upload.MaxFileSize, WebClient.SmartPages.ColorScheme.ColorScheme2.RightColor, WebClient.SmartPages.ColorScheme.ColorScheme3.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme1.LinkColor, WebClient.SmartPages.ColorScheme.ColorScheme1.HeadingColor, WebClient.SmartPages.ColorScheme.ColorScheme2.HeadingColor, WebClient.UserInterface.Localization.ShowDateOrder, WebClient.Cache.Objects.BrowseQueryTTL, RelatedContentProtocol, WebClient.Cache.Objects.PublishedSmartPagesQueryTTL, WebClient.CorporateWorkspage.Folder, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainFrame, WebClient.SmartPages.Publish.Location, WebClient.SmartPages.General.MaxNumberOfSmartPages, WebClient.SmartPages.ColorScheme.ColorScheme2.Name, WebClient.SmartPages.ColorScheme.ColorScheme3.Name, WebClient.SmartPages.DefaultSmartPage.DefaultColorScheme, WebClient.Cache.Objects.CacheListSize, WebClient.UserInterface.Configuration.EnableMSReportsIntegration, WebClient.SmartPages.ColorScheme.ColorScheme2.FontColor, WebClient.SmartPages.ColorScheme.ColorScheme2.BCMessagesColor, WebClient.SmartPages.ColorScheme.ColorScheme0.RightColor, WebClient.Internal.Temp.Location, WebClient.SmartPages.ColorScheme.ColorScheme0.BCMessagesColor, WebClient.Applications.iHTML.BQServiceResponseTimeout, RAFVersion, customSmartcutUrl, WebClient.UserInterface.PortalColor.MainFrame.Title.ColorMainTitleUnderline, WebClient.SmartPages.ColorScheme.ColorScheme1.FontColor, WebClient.Applications.iHTML.DiskCachePollingPeriod, WebClient.UserInterface.PortalColor.MainFrame.General.ColorMainWizardBorder, WebClient.Cache.Objects.JobTTL, WebClient.SmartPages.General.ShowHeadings, WebClient.SmartPages.ColorScheme.ColorScheme3.FooterColor, WebClient.Applications.DAServlet.ZAC, Folder0, WebClient.SmartPages.ColorScheme.ColorScheme3.RightColor, WebClient.Cache.Notifications.NotificationQueryTTL, WebClient.Internal.Cookies.KeepCookiesBetweenBrowserSessions, WebClient.SmartPages.DefaultSmartPage.ShowBookmarks, WebClient.SmartPages.DefaultSmartPage.PreconfiguredEmbeddedObjects, WebClient.Cache.Browse.JobOutputSummaryListing, WebClient.SmartPages.DefaultSmartPage.ShowExceptionsDashboard, WebClient.SmartPages.ColorScheme.ColorScheme0.Name, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainLinkFont, WebClient.SmartPages.ColorScheme.ColorScheme3.HeaderColor, WebClient.Internal.Redirect.RedirectPolicy, WebClient.SmartPages.ColorScheme.ColorScheme0.LeftColor, WebClient.SmartPages.ColorScheme.ColorScheme1.RightColor, WebClient.UserInterface.PortalColor.MainFrame.Text.ColorMainFont, WebClient.SmartPages.ColorScheme.ColorScheme1.FooterColor, WebClient.UserInterface.Localization.Show24HourTime, WebClient.SmartPages.ColorScheme.ColorScheme0.FontColor.
Recommended Action: Ensure that you ran the config tool and configured the RAF Web App component.
0 seconds
PASSED RA: Reporting and Analysis Check if Job Factory data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if IR DAS Services are available.
All IR DAS Services are available: IRDAS_AGENT_MODULE (Agent on dc-hyperiont01).
0 seconds
PASSED RA: Reporting and Analysis Check if Event Server data folder exists.
Data file locations are valid.
1 seconds
PASSED RA: Reporting and Analysis Check if the Interactive Reporting Product (INTERACTIVE_REPORTING_PRODUCT) component exists.
Found: 1.
0 seconds
FAILED RA: Reporting and Analysis Check if the Reporting and Analysis Setup (RA_SETUP) component exists.
Error: Found: 2, which is more than 1. This indicates some problem.
Recommended Action: Ensure that you ran the config tool and configured the Reporting and Analysis component.
0 seconds
PASSED RA: Reporting and Analysis Check if all required RAF properties exist under the Reporting and Analysis Setup component.
All required properties exist.
0 seconds
PASSED RA: Reporting and Analysis Check if the RAF Logical Web App (LOGICAL_WEB_APP) component exists.
Found: 1.
0 seconds
PASSED RA: Reporting and Analysis Check if Agent Modules and corresponding Agents belong to the same host.
Agent Modules and corresponding Agents belong to the same host.
0 seconds
PASSED RA: Reporting and Analysis Check if Agents are available.
All Agents are available: Agent on dc-hyperiont01.
0 seconds
PASSED SDKC: SDK checker Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat PingBQService ****** localhost 6800
11 seconds
PASSED SDKC: SDK checker Launch external checker with next command: D:\install03092012\user_projects\epmsystem1\config\validation\11.1.2.0\launchChecker.bat FetchCategory ****** localhost 6800 /Sample Content
16 seconds
FAILED WA: Essbase connectivity Check connectivity between Web Analysis Server and Essbase Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Essbase Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: HFM connectivity Check connectivity between Web Analysis Server and Financial Management Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that: 1) Financial Management Server is configured properly and started; 2) Web Analysis Web Application is configured and started.
0 seconds
FAILED WA: Login Check the possibility to login on Web Analysis Server.
Error: An error occurred while running the check.
Recommended Action: Ensure that Web Analysis Web Application is configured and started.
1 seconds
PASSED WEB: Web Application Availability of Web application context http://DC-HYPERIONT01:9000/WebAnalysis
0 seconds
Many many thanks in advance,
Zain

Derivation Rules in Posting Control and Account Deternination

Dear Friends,
Can any one please explain me the derivation rules. I started the chapter with the Posting Control and Account Determination in that:
Posting Control define:
Company Code
Acrl Type
Accounting Principle
Account determination:
Target account
Source account
document type
but if you see in the configuration in Derivation Rules:
It gives a different configuration like
Posting Control
Acct Princpl.
Accrl Type
COA
Process in accrul Engine
Own Parameter
Acct Determination
Doc. Type
Start Account
Target Account
Own Parameter
in this I am really get confused what is derivation rule in the accrul engine.
Can anyone please summarize for the same.
Thanks in advance
Mahendra Dev

Hi
Derivation Rule - is nothing but the deriving the values based on some criteria mentioned in the configuration.
Derivation rules you can see in the PCA (Profit Center Accounting) , CO-PA (Profitability Analysis).
This contains the different steps based on the requirement.
VVR

Can OEM Grid Control(12c) can provide the KPIs trend reports/analysis?

Hi experts:
Can EM cloud Control(12c) can provide the following trend reports/analysis for Report Servers(11gFMW report service)?
average response times
current job load
job load
failed job ratio
current jobs
etc.
If EM cloud control (12c) have not the indicators , Can we progmram to realize the above indicators and save the indicators to EM cloud control database?
If we can do programming to monitor the indicatiors, Is there any development documents to reference?
Thanks
Regards
Edward

Any update?
Thanks

Attrition Report and Analysis

Hi All,
I am new to HRMS. I have a Requirement to build Attrition Report and Analysis a report. How many joinees,resinees,transferout,transfer in and redundnacies per month. The report should shoulddispaly month wise.
How to build this report. If any one worked similar requirement. Please guide me or post details.

Dear Vignesh,
Thanks for your prompt replay, I tried but i didn't get the details exactly. My report should display like below.
                    JAN     FEB     MAR     APR     MAY     JUN     JUL     AUG     SEP     OCT     NOV     DEC
Staff              103      104     104          105     107     107     115
Joinees          1                    1            2                    8
Resigness                    1                    6          1                    2
Transfer in
Transferout
Redundancies
Please give me idea through sql is it possible.

Posting date and posting periods

HI Experts,
I am practicing IDES for SD. While using T VL02N for post good Issue I got this error:
<b>Posting only possible in periods 2006/12 and 2006/11 in company code 1000
Message no. M7053
Diagnosis
The posting date entered is not within one of the permitted posting periods (current period/previous period).
This can be due to one of two reasons:
The correct current period has not been set in the system.
For the system, the first of the entered periods is the current period. At the beginning of a new period, your systems administrator must change the current period in the material master record, using the function "Shift periods". This has not yet been done.
You have entered a wrong date in the field "Posting date".
Procedure
Check the posting date and correct it if necessary. If your input is correct, inform your systems administrator that the "period shifting" (period-end closing) process has not yet been completed. Copied from M8022</b>
I don;t think there is problem with my posting date. Can someone guide me on how solving this
Thanks
Yael

Go to OMSY and check the periods are current peiods or not to ur comp code?
If it is not the current period.
close the posting period by going to MMPV.
let us say comp code EG, YEAR-2006 PE-6
so you have to close the posting periods for all months till this month.
from comp code-EG
To comp code- EG
period-7
fiscal year-2006
repeat the same but with period-8(month) 9,10,11,12,
and do the same for 2007 too till you get the current month in OMSY T-Code.
you need to do close the period end of every month.
thank you
chaitanya

TS3999 In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ event

In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date? i.e. more "user-friendly" presentation?
Thx!
[email protected]

In MONTH, (PC) iCal only clearly lists 2 items a day. The 3rd item is "faded" and bottom portion cut off, w/ a "more" triangle in the lower-right corner. How can I expand (vertically) so the 3rd line posts clearly, and ONLY shows "more" if 4+ events?
Better yet... as there's a lot of "wasted" space w/ too large Month title and empty space surrounding the Month title above and too much space surrounding the month/year slider bar below, how can I minimize these to allow me more usable / valuable calendar "contents" so I don't need to waste so much time clicking "more" just to see the bottom of the truncated third event and find out there are no 4+ events posted that date? i.e. more "user-friendly" presentation?
Thx!
[email protected]

Difference between field staus group for posting key and GL account

Hi all,
can anyone tell me what is the difference of usage for field status group in posting key and GL account as i notice the fileds are the same. during data entry, system will check both field status or how?
thanks.

Hi
Both are to control the field status of the line item.
But, the FSG of the Posting Key and the GL FSG status should not clash like below.
Take 'Assignment' field as example :
Posting key FS - Suppress & GL FS - Required - will give you error message at the time of posting
Posting key FS - Required & GL FS - Suppress - will give you error message at the time of posting
Otherthan the above, all other combination works
VVR

Difference between post-capitalization and write-up of an asset

Dear Experts,
Kindly explain the difference between post-capitalization and write-up of an asset in SAP.
Regards
Komal

Hi Komal,
Post Capitalization means correction of the value of an asset, which is either set too low due to not carrying out a capitalization in the past, or which is treated entirely as expense.
where as Write up is the reversal of past depreciation and write-up is necessary either when the depreciation posted was too high or when the reasons for unplanned depreciation no longer exist.
Regards,
Venkata Raju

Output post processors and workflow engines doesn't come up after cloning

ours is a RAC+ASM+PCP -enabled
host1 : DB+ Concurrents
host1 : DB+ Concurrents
host3 : WEB+FORMS+OC4J
host4 : WEB+FORMS+OC4J
We are suffering from an “empty entropy pool” within the JDBC driver. Basically, the driver will attempt to gather a random number from the pool, but if the pool is empty the driver will wait (sometimes indefinitely) for values to come in. In most installations, the default configuration has the pool being “filled” by numbers created through a user interface such as mouse movements. On our servers, we are typically in a “headless” configuration so the pool may not be replenished properly. I’m not sure why we are seeing this new issue, but since the random number generator is related to security, maybe a security enhancement from the OS upgrade has made this more sensitive.
Note that QA4 is “mostly” up and running. The concurrent managers are started on both wpsun144 and wpsun154, but the output post processors and workflow engines are still having issues
The ultimate solution is to add some form of “entropy gathering daemon” to keep the pool filled, but we will need the Unix Admin team’s help and some research to find the best solution. Apparently, in Solaris 10, there is a kernel-level “cryptographic framework” for adding/removing entropy sources.
The workaround is to add a java option to the java command line. For Solaris this seems to work: “-Djava.security.egd=file:///dev/urandom”. This is NOT a reasonable solution since this requires modifying multiple delivered scripts/templates. I made the following changes only on wpsun144.
First, for the context file I had to modify the “s_adjreopts” variable to add the above workaround (per doc 1066312.1).
For adgentns this was fixed by modifying the $AU_TOP/perl/ADX/util/Java.pm file and adding the option. Here are the new lines in the file:
if($javaCmd =~ /jre/) {
return ("-mx256m -Djava.security.egd=file:///dev/urandom", 0);
} else {
return ("-Xmx512M -Djava.security.egd=file:///dev/urandom",0);
After this change, adgentns completed successfully and both the “tnanames.ora” and “listener.ora” files were created in the $TNS_ADMIN location.
For adgendbc, I had to manually modify the template for the script (there are 10 java command lines in the file).
$AD_TOP/admin/template/adgendbc_ux.sh
For txkExecSetJaznCredentials.pl, this file was modified:
$FND_TOP/patch/115/bin/txkSetJaznCredentials.pl
At this point, adcfgclone did finally complete successfully! Also adautocfg is now completing successfully!
Some references:
http://www.usn-it.de/index.php/2009/02/20/oracle-11g-jdbc-driver-hangs-blocked-by-devrandom-entropy-pool-empty/
Oracle E-Business Suite Applications Technology Readme for Release 12.1.3 (R12.ATG_PF.B.delta.3, Patch 8919491) (Doc ID 1066312.1)
Look for a section titled, “Attention: JDBC connections may time out during the upgrade process when random number generation is slow on machines with inadequate entropy.”
Can some one help me on this.

ours is a RAC+ASM+PCP -enabled
host1 : DB+ Concurrents
host1 : DB+ Concurrents
host3 : WEB+FORMS+OC4J
host4 : WEB+FORMS+OC4JPlease post the details of the application release, database version and OS.
We are suffering from an “empty entropy pool” within the JDBC driver. Basically, the driver will attempt to gather a random number from the pool, but if the pool is empty the driver will wait (sometimes indefinitely) for values to come in. In most installations, the default configuration has the pool being “filled” by numbers created through a user interface such as mouse movements. On our servers, we are typically in a “headless” configuration so the pool may not be replenished properly. I’m not sure why we are seeing this new issue, but since the random number generator is related to security, maybe a security enhancement from the OS upgrade has made this more sensitive.
Note that QA4 is “mostly” up and running. The concurrent managers are started on both wpsun144 and wpsun154, but the output post processors and workflow engines are still having issuesWhat is the error from the Workflow and OPP log files?
The ultimate solution is to add some form of “entropy gathering daemon” to keep the pool filled, but we will need the Unix Admin team’s help and some research to find the best solution. Apparently, in Solaris 10, there is a kernel-level “cryptographic framework” for adding/removing entropy sources.
The workaround is to add a java option to the java command line. For Solaris this seems to work: “-Djava.security.egd=file:///dev/urandom”. This is NOT a reasonable solution since this requires modifying multiple delivered scripts/templates. I made the following changes only on wpsun144.
First, for the context file I had to modify the “s_adjreopts” variable to add the above workaround (per doc 1066312.1).
For adgentns this was fixed by modifying the $AU_TOP/perl/ADX/util/Java.pm file and adding the option. Here are the new lines in the file:
if($javaCmd =~ /jre/) {
return ("-mx256m -Djava.security.egd=file:///dev/urandom", 0);
} else {
return ("-Xmx512M -Djava.security.egd=file:///dev/urandom",0);
After this change, adgentns completed successfully and both the “tnanames.ora” and “listener.ora” files were created in the $TNS_ADMIN location.If you are on R12, please see these docs (search for "Djava.security.egd").
Oracle E-Business Suite Applications Technology Readme for Release 12.1.3 (R12.ATG_PF.B.delta.3, Patch 8919491) [ID 1066312.1]
Oracle E-Business Suite Release 12.1.3 Readme [ID 1080973.1]
For adgendbc, I had to manually modify the template for the script (there are 10 java command lines in the file).
$AD_TOP/admin/template/adgendbc_ux.sh
For txkExecSetJaznCredentials.pl, this file was modified:
$FND_TOP/patch/115/bin/txkSetJaznCredentials.pl
Can some one help me on this.Are you trying to avoid manual changes? If yes, please make sure you have all the patches mentioned in the docs referenced above applied and you have all the necessary configuration/setup.
Thanks,
Hussein

Goods Receipt and Goods Issue - Posting Date and Document Date Problem

Hi All,
I was using SDK to build own add on to insert Posting Date and Document Date under Inventory> Inventory Transactions> Goods Receipt and Inventory> Inventory Transactions> Goods Issue, but the UI Screen Posting Date and Document Date shown current date.
My SAP Business One version was 2007A SP00 PL42 and alreadly upgrade to SP05.
End up result still the same.
Is there someone can help me?
Thanks you.
Best Regards,
danny

Hi there,
I already solve it by myself.
Actually is i call the initialization twice:
Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenEntry)
Thats what make this problem happened.
Sorry.
Best Regards,
danny

Reporting and Analysis Framework stuck - status yellow"Startup in Progress"

I just installed 11.1.2.2.0.66 on Win Server 2008 R2 - Foundation Services, Planning, and Essbase. 64bit computer, 500gb hard drive, physical box, 16gb memory - more than enough i would hope to run an EPM Planning development instance.
IIS 7.x .net framework 3.5.1 with Oracle Database 11g.
So each time i launch Workspace and log in as admin, it hangs for about three to five minutes and throws back the error stating that the reporting and analysis services on 6800 aren't responding.
In the workspace, navigate>administer, reporting and analysis, services, it shows reporting & analysis still trying to start.
The message in "RaFramework_stdout_console_Servlets" log in c:\oracle\midleware\user_projects\domains\epmsystem\servers\epmserver0\logs\
says
[SRC_METHOD: flush:?] GSM at localhost:6800 is not up

I will look through those logs. Thanks.
I did notice that there is a time_wait on the 6800 port - I can't understand if its something to do with the operating system or EPM; I don't have a firewall rule in place on that port and the OS was configured to turn off any firewalls.

AR Aging Report does not change with Posting, Due, and Document selections

It appears to me that when you run the AR Aging report with the same date ranges in each of the date selection fields, Posting, Due and Doument, you do not get a different display of aging buckets. Does this report always display data based on Due Date?

Hi Bill,
When you run the AR Aging report change "Age by" option and check aging buckets are changing or not it has to change.
Thanks,
Sachin

"Post Invoice and Payment seperately"

Hi Guys,
I need help on resolving this issue.
We are posting a vendor downpayment using F-48.
We are then doing a vendor invoice and subsequently clearing the open items using F-58. But we are getting the following error while posting
"Deferred Tax : Post Invoice and Payment seperately $1"
Thanks,
Srikanth.

hi,
Do you have two tax codes setup up. One tax code to post with the invoice and another one which is used for transferring when the invoice payment is made. Please check that you are using the right tax code setup for the posting with the invoice.
Regards
Girish BP

Posting trends and analysis

Similar Messages

Maybe you are looking for