Posting two websites on two domains

I have iWeb '08.
I have 2 Mac accounts, one personal one family.
I have two domains, one with each account.
When I open iWeb on the very bottom in 'green' is my Mac address.
My question:
I create a 'personal website' and I upload it to my 'personal account' no problem.
But now I want to create a 'family website' on my family account - and I use one computer.
How do I make sure that 'family site' goes to the family domain.
If I create multiple websites on iWeb '08 - how do I direct those sites to their proper domain.
I'm confused.
Also since I have your attention - if I have the HTML - how do I create a button?
And lastly - I know you can make a website 'password' protected. Is there a way within a website
to make ONE PAGE private. Let's say all the links on the 'home works' except for that 'one page.' Is that doable?
Thank you!

Log into your puter with new user name and then go and change your idisk user name and password to the 2nd .mac so that when you open the idisk it is that 2nd account, then you can launch iweb and make second site for that other .mac account...
making 1 page protected just use the help menu within iweb it will tell you how, it's simple...

Similar Messages

  • Two websites on different networks - two NICs

    Hello,
    I have got an xserve, running 10.4.3 with two NIcs on different networks (192.168.... and one on a 10.0.0...) , connected to two different ISPs. I would like to run two websites, one per ISP/network card.
    I've read through Apple's doumentation - I think the problem is that OSX will only connect to the internet via one network card. Any I dea what I can try?
    I have seen a post on the discussion board regarding the ipfw.conf and firewall
    Thanks,
    Nico

    It has to do mainly with a routing table. In that routing table you tell the router if the destinition IP is X from Subnet Y send it through Gateway Z like this:
    Destination | Subnet mask | Gateway
    192.168.40.0 | 255.255.255.0 | local
    10.65.1.0 | 255.255.255.0 | local
    192.168.32.0 | 255.255.255.0 | 192.168.40.13
    192.168.35.0 | 255.255.255.0 | 192.168.40.14
    192.168.0.0 | 255.255.0.0 | 192.168.40.13
    10.0.0.0 | 255.0.0.0 | 10.65.1.25
    0.0.0.0 | 0.0.0.0 | 10.65.1.1 (Default)
    Just set-up where things can come from and where they should go. Setup a good defauly and you should be set.
    Hope that helps a little.
    Sorry if the table is a little hard to read.

  • Did I get this right?  About the two websites...

    Hello There,
    I think I have this right, but if you guys could follow me along for a minute....
    I want to have two websites.
    Right now I have built one site on iWeb but have not done anything else with it. When I have this complete I what to upload (with FTP) to a web hosting service (not .mac)
    The second site (I have not built yet) I want to upload to .mac. I do not have a .mac account right now.
    So, let's say I finish the first site today (for the web host service) if I load this to a file folder then upload with an FTP program this should be good?
    Then let's say a couple of days later I build another site on iWeb for a .mac account can I do this?
    Will this work or will I have to use iWebsites program to run two websites? Does anyone have my set up and use iWebsites?
    I run iWeb 08.
    Any help or thoughts would be great.
    Thanks,
    Mike

    Use iWebSites or Multisite to maintain two separate domain files for your websites like Mireille described. Then it's so very easy to keep the two apart and publish which ever one you want.
    OT

  • Can I design two websites?

    I am new to iweb.
    I am wondering if I can design two websites that are not linked together. From the tutorials, it looks like if I design a second one it will link to the first one's welcome page. How do I form a website that is separate?

    If you haven't started the two sites yet I suggest you use iWebSites to create and manage the separate sites. I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
    This lets me edit several sites and only republish the one I want.
    OT

  • I now seem to have two websites...

    This is sort of a follow-up to a question I posted earlier that Mireille was able to help me with. (Help, Mireille!!!)
    It seems now that I have two websites sitting on my iDisk, and both are publishing, but under slightly different web addresses.
    The older site address is: web.mac.com/myusername/iWeb/Site/Home.html
    The new site address is: web.mac.com/myusername/Site/Home.html
    I don't care which site address it is, but people used to be able to access the site by my giving just "web.mac.com/myusername/" as the web address... but now that address goes immediately to the old site rather than the new one. When I tried to go into my iDisk to correct the problem, I didn't know what to do next. Help?

    I figured it out... I found the files under my iDisk in Web>sites>iWeb and deletes the older version of the site.
    Thanks to those who answered.

  • Can I access two websites at the same time?

    Does Dreamweaver have the ability to open two websites at the same time?
    I basically have a CMS hosted on one server, that connects to my clients sites on other servers. I want to be able to open files on one server and edit them and also edit files on another server at the same time.
    If this isn't available in Dreamweaver, then I think it should be. I often need to copy code from one page in a site to another page in different site. To have the ability to have two windows open, each connected to a different website server would be invaluable to me. By having separate windows, each can have its own server connection. I don't know how easy that would be, but I'd love it!
    Cheers
    Glynn

    You can only connect to one site at a time.  And you need to edit files locally, save & then upload to the remote server.   AFAIK, no single FTP app is capable of connecting to more than one server at a time.  You might be able to do what you want with DW open and an additional 3rd party FTP client like Filezilla, each connecting to different servers.
    Nancy O.

  • TS1388 After one or two websites the search "freezes". To rectify this I need to go into "Network" and press "Renew DHCP Lease" on my imac 10.6.8

    After one or two websites the search "freezes". To rectify this I need to go into "Network" and press "Renew DHCP Lease" on my imac 10.6.8TS1317 - Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connectionAny help?

    Check your computers time and date are correct, and updating to your location via Apple's servers.
    WiFi, Internet problems, possible solutions

  • I am unable to bookmark the same website in two different bookmark folders without one being automatically deleted by Firefox?

    I am a recent convert to Firefox. Regarding bookmarks: it seems that you cannot create a new bookmark the same website in two or more different bookmark folders. For example, if I bookmark a website in a bookmark folder called 'ABC' and then bookmark the same website in a different bookmark folder called XYZ, the bookmark will be in XYZ, but will be removed from ABC. This happens even when I assign a different name for the bookmark in ABC and XYZ.
    Is this the correct bookmark functionality or am I not doing something correctly? Thanks.

    You can do a Copy & Paste in the Bookmarks Manager (Shift+Ctrl+B) to create a copy of a bookmark.
    You can also drag the (fav)icon on the left end of the location bar to a folder in the Bookmarks menu drop down list or to a folder in the side bar (Ctrl+B) or to the Bookmarks Toolbar.
    In the side bar you need to click to the left of the icon to prevent Firefox from opening the bookmark.

  • Can you control your Iweb-website with two computers?

    I would like to maintain my Iweb website with two computers. Is this possible? I bought a new computer and I want to work on my website from two locations.

    Welcome to the discussions. These articles may help:
    iWeb: Publish to your MobileMe account from more than one computer
    Managing an iWeb site from multiple Macs with Dropbox
    Also see NOTE 1 here:
    http://iwebfaq.org/site/iWebTwocomputers.html

  • In one FI posting can we have two real objects?

    Hi All,
    When I am posting FI document with two real Objects (WBS & Cost Center) still system is accepting and created document.
    As per My knowledge in FI Document only one real object to be accept but my case it taking two real cost object, why?
    Is there any logic & activity and change any setting for this?
    Thank you
    Anil

    Hi,
    you can enter CO objects of more than one type in the FI document, but there is a "hierarchy" among the different object types that decides, which object gets the "real" posting. All other objects will only get a statistical posting, even if they are configured to allow real postings ( are "real objects" in your terms) .
    Examples:
    You enter a cost center and an internal order in the document: --> order gets real posting, center statistical.
    You enter a profitablitiy segment and an internal order in the FI document --> segement gets real posting, order statistical one.
    Regards
    Nikolas

  • Having problems copying two sided but not printing two sided of two sided originals

    I have no problem printing items two sided with two sided originals using my computer with Windows 7 but cannot copy using the automatic feeder as that option no longer appears when you click green arrow on the two sided of one sided original.

    Hello,
    The HP Officejet Pro 8600 (N911a) only offer automatic two-sided printing.
    ADF Duplexing (Automatic two sided copying of an original) is only offered by the HP Officejet Pro 8600 Plus (N911g) or Premium (N911n) for that series.
    You may find its specifications below:
    Boost productivity – and save time and paper – with
    automatic two-sided printing and 250-sheet paper tray.
     http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA3-6985EEE.pdf
    To compare with, below is the Officejet Pro 8600 Plus specs which do offer a such:
    Boost productivity with automatic two-sided printing, scanning and copying with 50-page automatic document feeder.
    http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA3-6986EEE.pdf
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT1420 I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit.

    I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit. One iPhone and one iPad show in the authorization list. iTunes wants to delete my purchased programs and books from the iPad to continue synchronization. What can I do?

    Ok, now I do wish I could edit....
    I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
    So, I kept playing, and playing some more...
    I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
    I didn't remove the Ethernet, Firewire or Airport Network devices.
    Now, I have done so. I REMOVED EVERYTHING
    No pairing, no network devices.
    Bluetooth was already turned off, and I rebooted.
    I turned off tethering and rebooted the iphone.
    I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
    I opened a web page, no go... d4mn, I was close...
    Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
    Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
    So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
    Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best).

  • How to calculate the ratio between the maximum and minimum peaks of the two waves using two while loops?

    hello everyone,
    i'm rai from indonesia
    I have a final project about pulse oximetriy, I have some problems,
    how to calculate the ratio between the maximum and minimum peaks of the two waves using two while loops to calculate SpO2 ?
    My program image can be seen below predicament ?
    Attachments:
    spo2 akusisi data with filter lpf hpf smoot nilai max min ir merah.vi ‏249 KB

    Hi Rai,
    You should post this into the LabVIEW forum rather than Real-Time since this isn't a Real-Time application. Your post will see more replies in the LabVIEW forum. 
    As far as your question is concerned, you can write the max and min from the respective loops to a local variable to send the data out of the loops to a third loop or just do the calculation in one of the loops. This would be ideal if you're trying to do this while the loop is running. 
    -Jayk
    Applications Engineering
    National Instruments

  • I have two apple ids somehow, probably from two mobile and two computers - how do I merge them into one account so they all work with iCloud?

    Somewhere, somehow, between two mobile and two macs, I ended up with two apple ids. I figured that this was the root of my problem to syncing. So, I am syncing Mail, Contacts, etc through the one account that I bought storage on this year in iCloud. I want to merge the two accounts, since many of my apps were purchased with my other id. Apparently, Keynote will not merge files since the app was bought with the second id, not the id I am using for icloud.
    What to do??? I read, in the forums, that I am definitely not alone. I always had the id I used for the Apple Store to buy iTunes items, and then apps. The other id, that I am using for iCloud was based on my iDisk id, and apparently I set up as a separate account. The much failed iDisk account appears to be the one that I wish I never got involved with. Should I feel the same way about iCloud. If I cannot merge the two APPLE accounts from the same person (ME!!!), then many dropbox really is the answer for my file sharing needs.
    Please help me decide.

    To begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
    Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud too.
    You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
    The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photostream, it does not affect any of your iTunes services.
    To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
    To go back to your question; you cannot merge accounts, but perhaps using one account for iCloud and the other for iTunes will resolve the majority of the reasons you needed to merge to begin with.

  • I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

    I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

    Hi Gilly,
    I have no proof, but I think it will not work with an adapter, only Mini Display Port or Thunderbolt.

Maybe you are looking for