Posting using cross company code transaction must be blocked

Hello Guys,
I have a  problem related to cross company code transaction.
In the OBA7 I have the document type KE that not allows posting using cross company code transactions. In the moment that I am creating a new document through the FB01, I have an error as "Consolidated companies US52 and ' ' are different
Message no. F5080. As a results, the document cannot be created by this way. This is the correct process.
But I have several documents that was used the doc type KE and the cross company code transaction was used. This is my issue. I don´t know why these documents were posted. The document come from another interface via IDOC and the IDOC not errored out.
Can anyone help on this?
Thanks
Rafael B.

Hello, I´ve checked the log and no changes since 2008.
The document was created in 2010.
This is the message: "No logs found for the selected period"
More suggestions?
Regards.
Rafael

Similar Messages

  • Cross Company code Transaction error

    Hi,
    When I am posting below Cross company code transaction getting error - Balancing field "Profit Center" in line item 001 not filled.
    Vendor A/c - Company code1
    To Bank clearing A/c - Company code2
    Problem is profit center is not deriving for Vendor reconciliation A/c. We cannot make a default profit center this.
    When I am posting cross company code invoice it is correclty deriving the profit center for the same reconciliation a/c.
    Also I do not see any mistake in document splitting configuration.
    Any help will be appreciated.
    Regards
    Shanu

    Hi
    Check the following things:
    1. In KE52, the profit center entered in Bank Clearing Account Item in Co Code B is also assigned in Co Code A. Then system will allow you to post the cross co code document
    2. Are you using the correct Document Type while posting the transaction. IN your Document Type Definition in OBA7, the check boxes for Inter Co posting and Trading Partner (Trading Partner only if inter co elimination is being used) have been ticked
    3. You have assigned the correct item category to vendor reconcilliation account (Should be Vendor GL), Inter co Clearing account (Balance sheet Account ) and Bank Clearing account (balance sheet) have been assigned in your configuration
    Regards
    Sanil Bhandari
    <a href="http://www.vcq.biz/">sai baba wallpaper</a>, <a href="http://www.utorrent.name/">utorrent</a>

  • Transfer posting of tax in a cross company code transaction

    Has anyone used the program RFBUST10, that transfer postings of tax in cross company code transactions?  If so , can you give some detail in how to populate the table TBUVTX in config?  There is not much documentation on this  -
    Thanks Pavi

    Adi  -
    That works as you say -
    I have also awarded points as you have been extremely helpful and i very much appreciate your input.
    We use i/c customers and vendors for our obya i/c auto post and that looks to be an issue here with the program generated postings for the tax items.   
    I have some additional VAT related questions- would you be willing to consult further with me briefly? I have a couple of questions around processes that you have seen used in the EU.  For example - if we use cust/vendors in our obya config and that prevents us from using rfbust to shift taxes between co codes (?), have you seen companies just use rfbust to calculate the amounts and then make some type of month end journal entry upload ? 
    Thanks ,Pavi

  • Cross company code transaction in cash journal

    Hi,
    Is it possible to do cross company code transactions in cash  journal ?
    Eg:
    i want to make a  payment ,from cash journal of cocd 1000  to  cocd5000.
    i should book the payment  only thro cash journal .
    Regards
    Guru

    Hi Guys,
    No cross company code transactions can be made thru CJ. Reason being, CJ is created under a company  code & generally related to a specific BA and handles petty cash. But u r not using BA.
    So we cannot post corss company code transactions in CJ
    Regards,
    Ajay

  • Issue with Cross-Company code transactions and Extended Withholding tax

    Hi Gurus,
    I am having an issue with Cross-company code transaction while posting expense with 2 different company codes.
    In the 2 company codes, one company code is setup for Withholding tax and other was not set.
    While posting in FB50, I am getting the below message and system does not allow to post the invoice.
    Company codes have different settings for withholding tax treatment
    Message no. F5786
    Diagnosis
    You are entering a document containing at least one vendor or customer item and which has line items in several company codes. The extended withholding tax treatment has been set to active in one of these company codes, but not in one of the other company codes.
    System Response
    You cannot enter this kind of document.
    Procedure
    Enter the transaction in two documents.
    For this I tried to test the transaction by activating of extended Withholding tax for both the company codes. Then the invoice is posting correctly now.
    The point is if I activate extended withholding tax for the Company code which is not using the setup, will it face any issues in other areas? and also kindly advice whether is this a right way to set up to fix the current problem.
    Thanks for the Support and early response will be appreciated.
    JBC.

    Hi Mamta,
    Thanks for the Response. I think you misunderstood my scenario.
    For Eg in FB60 with Co code 5065:
    I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
    Posting        GL                   Co Code
    Dr          106520(Exp)            1000
    Cr          202020(Bank)           5065
    For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
    I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
    Thanks,
    Bapu

  • OBYA : vendor and customer clearing in cross company code transaction

    Hi Gurus,
    Please can any one telll me how to clear the transactions of cross company code which is in vendor and customer.
    I already done a configuration in OBYA for customer - vendor.
    Expected a process of clearing the cross company code transaction.
    Thanks in Advance
    Manish.

    Hi,
    If you are doing for vendor invoice,
    for example:
    co code 1000 and co.code2000
    Use F-02 and enter following transactions
    posting key 31 -vendor- company code 1000
    posting key 25- expenses and enter new company code 2000.
    After the entry it will display 4 line items, 2line item for 1000&2000
    Regards,
    Sreekanth

  • Derive profit center in cross company code transaction into clearing items

    Dears,
    I have one condition where I want to copy profit center from first line item to second line item in a cross company code transaction for example.
    I have two company codes XX10 and XX20
    two profit centers XX50 for company code XX10 and XX60 for company code XX20
    I am creating cross company code transaction. Now I want when giving XX50 for company code XX10 so upon creating cross company line items this profit center given in first line be copied automatically in the cross company code line item accordingly.
    example:
    Dr company code XX10 with profit center XX50
    Cr company code XX20 with profit center XX60
    Required:
    These profit centers be copied automatically in the cross company line items automatically. I am using same controlling area as the company code not cross company codes.

    Ya right , but when i am trying to post the enteries ,  the clearing item is having different profit center ( i.e which i have assigned in the t.code FAGL3KEH ), but  the vendor line item is still taking the dummy profit center.
    Vendor line item should actually take the profit center from the clearing line item ... but it it not taking ..
    Edited by: muscan S on Mar 3, 2010 6:48 AM

  • Payment term is not being pickedup in cross company code transaction

    Dear Friends,
    In one of the cross company code transaction scenarios (MIRO), We post a invoice in HQ books to bill on outside vendor. In subsidiary books one more cross company code document will get generated automatically, as billing on HQ as a vendor. In that second document, payment term is not being pickedup.
    eg., A is HQ and B is subsidiary company
    I post invoice in A books as B account debit and outside vendor credit.
    In B books one more entry will get generated automatically as GRIR account debit and A (defined as vendor in B books) account credit.
    In B Books payment terms are maintained in vendor master record (A vendor).
    But still the payment terms are not being pickedup in that document. Because of this, it is taking the document date itself as net due date.
    Please suggest, how to proceed to pick some payment term in that document.
    Regards
    Suresh

    Hi
    Assign the payment terms in Purchase Organisation level in Vendor Master Record.
    Regards
    Shammi

  • Report painter,cross company code transactions

    Hi Masters,
    1,  Please send material of  REPORT PAINTER ?
    2,  Please  Send material of CROSS COMPANY CODE TRANSACTIONS
    3.  Please send material of  FUNCTIONAL SPECTS
    my  mail id [email protected]
      Thank you friends

    Hi,
    Hi,
    Cross-Company-Code Configurations
    Step1: T Code: OBYA
    We have to maintain Receiver Company Code as Customer in Sender Company Code and Sender Company Code as Vendor in Receiver Company Code. Then problem will be solved.
    Step2: T Code: OB60
    There you can find 4 line items, Copy all the 4 Line Items using Copy As button and customize to your company code.
    Cross-Company-Code Transactions
    1. To Change Cross Company Code Document: T Code: FBU2 - Change
    2. To Display Cross Company Code Document: T Code: FBU3 - Display
    3. To Reverse Cross Company Code Document: T Code: FBU8 - Reverse
    regards,
    Santosh kumar

  • Cross company code transactions

    All gurus,, I have one problem in Cross company code transactions:
    Ex: I have Company code A and B,,, where A pays on behalf of B. how to configure and what is process to follow in APP for making payment to vendor of B...
    A pays to vendor of B... how it happens in APP.
    Santosh.

    Hi,
    Hi,
    Cross-Company-Code Configurations
    Step1: T Code: OBYA
    We have to maintain Receiver Company Code as Customer in Sender Company Code and Sender Company Code as Vendor in Receiver Company Code. Then problem will be solved.
    Step2: T Code: OB60
    There you can find 4 line items, Copy all the 4 Line Items using Copy As button and customize to your company code.
    Cross-Company-Code Transactions
    1. To Change Cross Company Code Document: T Code: FBU2 - Change
    2. To Display Cross Company Code Document: T Code: FBU3 - Display
    3. To Reverse Cross Company Code Document: T Code: FBU8 - Reverse
    regards,
    Santosh kumar

  • FU 065:-Document belongs to cross company- code transaction(error massage)

    Hi expert,
    I am going to reverse a document (after resetting through LSMW,useing -F.80 as for mass reversal) and getting a error massage below(this document has been generated after F110)
    FU 065:-Document belongs to cross company- code transaction(error massage)
    Please advise me how can I reverse this document and also advise me what does it mean,
    Will it be done by FBU8? (But when I am using it,showing two documents what does it mean and advise should I select both document for reversal)
    Please advise
    Thanks & Regards

    Hi
    Thanks for your quick advise,
    I am trying to do that through FBU8 but I am getting there two documents numbere inside for reversal (it contained two documents)
    Should I reverse both documents or I should select one one only
    Please advise why it is showing two documents inside
    Thanks & Regards

  • Sales invoice hitting cross company code transaction

    Hi,
    Material and customer maintaining in the same company code and sales order raised accordingly.
    but when we are trying to post delivery it is generating cross company code transactions.
    what are the possible reasons.
    sairavi

    Ya right , but when i am trying to post the enteries ,  the clearing item is having different profit center ( i.e which i have assigned in the t.code FAGL3KEH ), but  the vendor line item is still taking the dummy profit center.
    Vendor line item should actually take the profit center from the clearing line item ... but it it not taking ..
    Edited by: muscan S on Mar 3, 2010 6:48 AM

  • FB70: Cross-company code transaction

    Hello
    In Cross-company code transaction with FB70, we use company code A and company code B for the line Items.
    In the document overview display for customer invoice, the line items long text entered appeared only in the text field for the company code B entered for the line item.
    Is there anyway to make appear line itemu2019s long text entered for company code B in the text field on the document overview display of company A?
    Thanks,
    VWA

    Hello Madhu,
    Thank you for your input. What I need is to have the text entered for the line item of Cie B on the document overview display for A.
    In cross-company transaction such as FB70, the text entered for each Cie appears only on each document but I want B to appear on A.
    Regards,

  • *When we are doing the cross company code transaction it is hitting

    Hi Experts,
    Her my client having one requirment as follows,
    When we are doing the cross company code transaction it is hitting the wrong Gl (i.e 109999999-suspense clearing a/c)
    It should hit either (135060016-tie up control a/c or 241060001-tilaknagar industries ltd control ac) What can i do?
    Regards,
    Devendra
    Edited by: Devendraachari on Jun 30, 2010 12:07 PM
    Moderator: Give proper titles to your threads

    hI,
    check what is the gl account maintained for cross company code transactions. T.code may be OBA1
    What transactions you are doing ex: Asset transfer, vendor postings .. ..
    Regards,
    Sankar
    Edited by: Durgasankar.Innamuri on Jun 30, 2010 12:09 PM

  • Prepare Cross-Company Code Transactions

    hello, 
    I am configuring operations  Cross-Company Code Transactions
    , but when counting in one of the societies fi (for transaction f-02), it doesn't generate the countable voucher in the other configured society. 
    Please, they could give me a help in this respect. 
    thank you, 
    jorge silva

    go to OBYA and configure the accounts concerned..
    S K

Maybe you are looking for

  • How do I insert the tab character in a table cell in Pages 5.2?

    I'm typing text in a table cell.  I need to insert a tab in the text.  I've tried all of the modifier keys with the tab.  I read somewhere it would be CTRL>TAB, like Word, but that navigates to the Inspector.

  • HTML in a mail

    Hi all, I'm trying to configure a mail receiver with the content in html format as Michal says in his blog: /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter My problem is that if I apply my xslt mapping I don't

  • The connection pool does not exist?

    Can somebody tell what is happening? For some reason the Sun Java Application Server 8 seems to think that there is no connection pool. For a moment everything worked. I did not change the configuration but now I get this message (if I open the admin

  • The screen goes black instead of turnin off

    I have my screen set up to switch off after X minutes, and it is working fine, except it does not really shut downs. It just goes black, but the backlight is still working, while what I want is the result I get when I run sleep 2 && xset dpms force o

  • ACS 4.2 - is it possible to change replication port?

    Hi, trying to find out if it some tweek to change the ACS replication port TCP/2000 to something else. I know it's possible to make a different policy-map or to not inspect the Skinny protocol to avoid conflict, but that not the solution I'm looking